2 * SPDX-License-Identifier: BSD-3-Clause
4 * Copyright (c) 2008 Yahoo!, Inc.
6 * Written by: John Baldwin <jhb@FreeBSD.org>
8 * Redistribution and use in source and binary forms, with or without
9 * modification, are permitted provided that the following conditions
11 * 1. Redistributions of source code must retain the above copyright
12 * notice, this list of conditions and the following disclaimer.
13 * 2. Redistributions in binary form must reproduce the above copyright
14 * notice, this list of conditions and the following disclaimer in the
15 * documentation and/or other materials provided with the distribution.
16 * 3. Neither the name of the author nor the names of any co-contributors
17 * may be used to endorse or promote products derived from this software
18 * without specific prior written permission.
20 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
21 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
22 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
23 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
24 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
25 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
26 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
27 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
28 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
29 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
33 #include <sys/cdefs.h>
34 #include <sys/param.h>
35 #include <sys/errno.h>
45 MPT_TABLE(top, volume);
48 mpt_volstate(U8 State)
53 case MPI_RAIDVOL0_STATUS_STATE_OPTIMAL:
55 case MPI_RAIDVOL0_STATUS_STATE_DEGRADED:
57 case MPI_RAIDVOL0_STATUS_STATE_FAILED:
59 case MPI_RAIDVOL0_STATUS_STATE_MISSING:
62 sprintf(buf, "VSTATE 0x%02x", State);
68 volume_name(int ac, char **av)
70 CONFIG_PAGE_RAID_VOL_1 *vnames;
71 U8 VolumeBus, VolumeID;
75 warnx("name: volume and name required");
79 if (strlen(av[2]) >= sizeof(vnames->Name)) {
80 warnx("name: new name is too long");
84 fd = mpt_open(mpt_unit);
91 error = mpt_lookup_volume(fd, av[1], &VolumeBus, &VolumeID);
93 warnc(error, "Invalid volume: %s", av[1]);
97 vnames = mpt_vol_names(fd, VolumeBus, VolumeID, NULL);
100 warn("Failed to fetch volume names");
105 if (vnames->Header.PageType != MPI_CONFIG_PAGEATTR_CHANGEABLE) {
106 warnx("Volume name is read only");
111 printf("mpt%u changing volume %s name from \"%s\" to \"%s\"\n",
112 mpt_unit, mpt_volume_name(VolumeBus, VolumeID), vnames->Name,
114 bzero(vnames->Name, sizeof(vnames->Name));
115 strcpy(vnames->Name, av[2]);
117 if (mpt_write_config_page(fd, vnames, NULL) < 0) {
119 warn("Failed to set volume name");
130 MPT_COMMAND(top, name, volume_name);
133 volume_status(int ac, char **av)
135 MPI_RAID_VOL_INDICATOR prog;
136 RAID_VOL0_STATUS VolumeStatus;
137 uint64_t total, remaining;
139 U8 VolumeBus, VolumeID;
143 warnx("volume status: %s", ac > 2 ? "extra arguments" :
148 fd = mpt_open(mpt_unit);
155 error = mpt_lookup_volume(fd, av[1], &VolumeBus, &VolumeID);
157 warnc(error, "Invalid volume: %s", av[1]);
162 error = mpt_raid_action(fd, MPI_RAID_ACTION_INDICATOR_STRUCT, VolumeBus,
163 VolumeID, 0, 0, NULL, 0, &VolumeStatus, (U32 *)&prog, sizeof(prog),
166 warnc(error, "Fetching volume status failed");
171 printf("Volume %s status:\n", mpt_volume_name(VolumeBus, VolumeID));
172 printf(" state: %s\n", mpt_volstate(VolumeStatus.State));
174 if (VolumeStatus.Flags & MPI_RAIDVOL0_STATUS_FLAG_ENABLED)
178 if (VolumeStatus.Flags & MPI_RAIDVOL0_STATUS_FLAG_QUIESCED)
179 printf(", QUIESCED");
180 if (VolumeStatus.Flags & MPI_RAIDVOL0_STATUS_FLAG_RESYNC_IN_PROGRESS)
181 printf(", REBUILDING");
182 if (VolumeStatus.Flags & MPI_RAIDVOL0_STATUS_FLAG_VOLUME_INACTIVE)
183 printf(", INACTIVE");
184 if (VolumeStatus.Flags & MPI_RAIDVOL0_STATUS_FLAG_BAD_BLOCK_TABLE_FULL)
185 printf(", BAD BLOCK TABLE FULL");
187 if (VolumeStatus.Flags & MPI_RAIDVOL0_STATUS_FLAG_RESYNC_IN_PROGRESS) {
188 total = (uint64_t)prog.TotalBlocks.High << 32 |
189 prog.TotalBlocks.Low;
190 remaining = (uint64_t)prog.BlocksRemaining.High << 32 |
191 prog.BlocksRemaining.Low;
192 pct = (float)(total - remaining) * 100 / total;
193 printf(" resync: %.2f%% complete\n", pct);
199 MPT_COMMAND(volume, status, volume_status);
202 volume_cache(int ac, char **av)
204 CONFIG_PAGE_RAID_VOL_0 *volume;
205 U32 Settings, NewSettings;
206 U8 VolumeBus, VolumeID;
211 warnx("volume cache: %s", ac > 3 ? "extra arguments" :
212 "missing arguments");
216 for (s1 = av[2]; *s1 != '\0'; s1++)
218 if ((strcmp(av[2], "enable")) && (strcmp(av[2], "enabled")) &&
219 (strcmp(av[2], "disable")) && (strcmp(av[2], "disabled"))) {
220 warnx("volume cache: invalid flag; "
221 "must be 'enable', 'enabled', 'disable', or 'disabled'");
225 fd = mpt_open(mpt_unit);
232 error = mpt_lookup_volume(fd, av[1], &VolumeBus, &VolumeID);
234 warnc(error, "Invalid volume: %s", av[1]);
239 volume = mpt_vol_info(fd, VolumeBus, VolumeID, NULL);
240 if (volume == NULL) {
245 Settings = volume->VolumeSettings.Settings;
247 NewSettings = Settings;
248 if (strncmp(av[2], "enable", strlen("enable")) == 0)
250 else if (strncmp(av[2], "disable", strlen("disable")) == 0)
251 NewSettings &= ~0x01;
253 if (NewSettings == Settings) {
254 warnx("volume cache unchanged");
260 volume->VolumeSettings.Settings = NewSettings;
261 error = mpt_raid_action(fd, MPI_RAID_ACTION_CHANGE_VOLUME_SETTINGS,
262 VolumeBus, VolumeID, 0, *(U32 *)&volume->VolumeSettings, NULL, 0,
263 NULL, NULL, 0, NULL, NULL, 0);
265 warnc(error, "volume cache change failed");
270 MPT_COMMAND(volume, cache, volume_cache);