usr.sbin/usbconfig/usbconfig.c

   1 /* $FreeBSD$ */
   2 /*-
   3  * SPDX-License-Identifier: BSD-2-Clause-FreeBSD
   4  *
   5  * Copyright (c) 2008-2009 Hans Petter Selasky. All rights reserved.
   6  *
   7  * Redistribution and use in source and binary forms, with or without
   8  * modification, are permitted provided that the following conditions
   9  * are met:
  10  * 1. Redistributions of source code must retain the above copyright
  11  *    notice, this list of conditions and the following disclaimer.
  12  * 2. Redistributions in binary form must reproduce the above copyright
  13  *    notice, this list of conditions and the following disclaimer in the
  14  *    documentation and/or other materials provided with the distribution.
  15  *
  16  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
  17  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  18  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
  19  * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
  20  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  21  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  22  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  23  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
  24  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
  25  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
  26  * SUCH DAMAGE.
  27  */
  28
  29 #include <stdio.h>
  30 #include <stdlib.h>
  31 #include <stdint.h>
  32 #include <err.h>
  33 #include <string.h>
  34 #include <pwd.h>
  35 #include <grp.h>
  36 #include <errno.h>
  37 #include <ctype.h>
  38 #include <sys/types.h>
  39
  40 #include <libusb20_desc.h>
  41 #include <libusb20.h>
  42
  43 #include "dump.h"
  44
  45 struct options {
  46         const char *quirkname;
  47         void   *buffer;
  48         int template;
  49         gid_t   gid;
  50         uid_t   uid;
  51         mode_t  mode;
  52         uint32_t got_any;
  53         struct LIBUSB20_CONTROL_SETUP_DECODED setup;
  54         uint16_t bus;
  55         uint16_t addr;
  56         uint16_t iface;
  57         uint16_t vid;
  58         uint16_t pid;
  59         uint16_t lo_rev;                /* inclusive */
  60         uint16_t hi_rev;                /* inclusive */
  61         uint8_t string_index;
  62         uint8_t config_index;
  63         uint8_t alt_index;
  64         uint8_t got_list:1;
  65         uint8_t got_bus:1;
  66         uint8_t got_addr:1;
  67         uint8_t got_iface:1;
  68         uint8_t got_set_config:1;
  69         uint8_t got_set_alt:1;
  70         uint8_t got_set_template:1;
  71         uint8_t got_get_template:1;
  72         uint8_t got_suspend:1;
  73         uint8_t got_resume:1;
  74         uint8_t got_reset:1;
  75         uint8_t got_power_off:1;
  76         uint8_t got_power_save:1;
  77         uint8_t got_power_on:1;
  78         uint8_t got_dump_device_quirks:1;
  79         uint8_t got_dump_quirk_names:1;
  80         uint8_t got_dump_all_desc:1;
  81         uint8_t got_dump_device_desc:1;
  82         uint8_t got_dump_curr_config:1;
  83         uint8_t got_dump_all_config:1;
  84         uint8_t got_dump_info:1;
  85         uint8_t got_dump_stats:1;
  86         uint8_t got_show_iface_driver:1;
  87         uint8_t got_remove_device_quirk:1;
  88         uint8_t got_add_device_quirk:1;
  89         uint8_t got_remove_quirk:1;
  90         uint8_t got_add_quirk:1;
  91         uint8_t got_dump_string:1;
  92         uint8_t got_do_request:1;
  93         uint8_t got_detach_kernel_driver:1;
  94 };
  95
  96 struct token {
  97         const char *name;
  98         uint8_t value;
  99         uint8_t narg;
 100 };
 101
 102 enum {
 103         T_UNIT,
 104         T_ADDR,
 105         T_UGEN,
 106         T_IFACE,
 107         T_SET_CONFIG,
 108         T_SET_ALT,
 109         T_SET_TEMPLATE,
 110         T_GET_TEMPLATE,
 111         T_ADD_DEVICE_QUIRK,
 112         T_REMOVE_DEVICE_QUIRK,
 113         T_ADD_QUIRK,
 114         T_REMOVE_QUIRK,
 115         T_SHOW_IFACE_DRIVER,
 116         T_DETACH_KERNEL_DRIVER,
 117         T_DUMP_QUIRK_NAMES,
 118         T_DUMP_DEVICE_QUIRKS,
 119         T_DUMP_ALL_DESC,
 120         T_DUMP_DEVICE_DESC,
 121         T_DUMP_CURR_CONFIG_DESC,
 122         T_DUMP_ALL_CONFIG_DESC,
 123         T_DUMP_STRING,
 124         T_DUMP_INFO,
 125         T_DUMP_STATS,
 126         T_SUSPEND,
 127         T_RESUME,
 128         T_POWER_OFF,
 129         T_POWER_SAVE,
 130         T_POWER_ON,
 131         T_RESET,
 132         T_LIST,
 133         T_DO_REQUEST,
 134 };
 135
 136 static struct options options;
 137
 138 static const struct token token[] = {
 139         {"-u", T_UNIT, 1},
 140         {"-a", T_ADDR, 1},
 141         {"-d", T_UGEN, 1},
 142         {"-i", T_IFACE, 1},
 143         {"set_config", T_SET_CONFIG, 1},
 144         {"set_alt", T_SET_ALT, 1},
 145         {"set_template", T_SET_TEMPLATE, 1},
 146         {"get_template", T_GET_TEMPLATE, 0},
 147         {"add_dev_quirk_vplh", T_ADD_DEVICE_QUIRK, 5},
 148         {"remove_dev_quirk_vplh", T_REMOVE_DEVICE_QUIRK, 5},
 149         {"add_quirk", T_ADD_QUIRK, 1},
 150         {"remove_quirk", T_REMOVE_QUIRK, 1},
 151         {"detach_kernel_driver", T_DETACH_KERNEL_DRIVER, 0},
 152         {"dump_quirk_names", T_DUMP_QUIRK_NAMES, 0},
 153         {"dump_device_quirks", T_DUMP_DEVICE_QUIRKS, 0},
 154         {"dump_all_desc", T_DUMP_ALL_DESC, 0},
 155         {"dump_device_desc", T_DUMP_DEVICE_DESC, 0},
 156         {"dump_curr_config_desc", T_DUMP_CURR_CONFIG_DESC, 0},
 157         {"dump_all_config_desc", T_DUMP_ALL_CONFIG_DESC, 0},
 158         {"dump_string", T_DUMP_STRING, 1},
 159         {"dump_info", T_DUMP_INFO, 0},
 160         {"dump_stats", T_DUMP_STATS, 0},
 161         {"show_ifdrv", T_SHOW_IFACE_DRIVER, 0},
 162         {"suspend", T_SUSPEND, 0},
 163         {"resume", T_RESUME, 0},
 164         {"power_off", T_POWER_OFF, 0},
 165         {"power_save", T_POWER_SAVE, 0},
 166         {"power_on", T_POWER_ON, 0},
 167         {"reset", T_RESET, 0},
 168         {"list", T_LIST, 0},
 169         {"do_request", T_DO_REQUEST, 5},
 170 };
 171
 172 static void
 173 be_dev_remove_quirk(struct libusb20_backend *pbe,
 174     uint16_t vid, uint16_t pid, uint16_t lorev, uint16_t hirev,
 175     const char *str)
 176 {
 177         struct libusb20_quirk q;
 178         int error;
 179
 180         memset(&q, 0, sizeof(q));
 181
 182         q.vid = vid;
 183         q.pid = pid;
 184         q.bcdDeviceLow = lorev;
 185         q.bcdDeviceHigh = hirev;
 186         strlcpy(q.quirkname, str, sizeof(q.quirkname));
 187
 188         error = libusb20_be_remove_dev_quirk(pbe, &q);
 189         if (error) {
 190                 fprintf(stderr, "Removing quirk '%s' failed, continuing.\n", str);
 191         }
 192         return;
 193 }
 194
 195 static void
 196 be_dev_add_quirk(struct libusb20_backend *pbe,
 197     uint16_t vid, uint16_t pid, uint16_t lorev, uint16_t hirev,
 198     const char *str)
 199 {
 200         struct libusb20_quirk q;
 201         int error;
 202
 203         memset(&q, 0, sizeof(q));
 204
 205         q.vid = vid;
 206         q.pid = pid;
 207         q.bcdDeviceLow = lorev;
 208         q.bcdDeviceHigh = hirev;
 209         strlcpy(q.quirkname, str, sizeof(q.quirkname));
 210
 211         error = libusb20_be_add_dev_quirk(pbe, &q);
 212         if (error) {
 213                 fprintf(stderr, "Adding quirk '%s' failed, continuing.\n", str);
 214         }
 215         return;
 216 }
 217
 218 static uint8_t
 219 get_token(const char *str, uint8_t narg)
 220 {
 221         uint8_t n;
 222
 223         for (n = 0; n != (sizeof(token) / sizeof(token[0])); n++) {
 224                 if (strcasecmp(str, token[n].name) == 0) {
 225                         if (token[n].narg > narg) {
 226                                 /* too few arguments */
 227                                 break;
 228                         }
 229                         return (token[n].value);
 230                 }
 231         }
 232         return (0 - 1);
 233 }
 234
 235 static uid_t
 236 num_id(const char *name, const char *type)
 237 {
 238         uid_t val;
 239         char *ep;
 240
 241         errno = 0;
 242         val = strtoul(name, &ep, 0);
 243         if (errno) {
 244                 err(1, "%s", name);
 245         }
 246         if (*ep != '\0') {
 247                 errx(1, "%s: illegal %s name", name, type);
 248         }
 249         return (val);
 250 }
 251
 252 static int
 253 get_int(const char *s)
 254 {
 255         int val;
 256         char *ep;
 257
 258         errno = 0;
 259         val = strtoul(s, &ep, 0);
 260         if (errno) {
 261                 err(1, "%s", s);
 262         }
 263         if (*ep != '\0') {
 264                 errx(1, "illegal number: %s", s);
 265         }
 266         return val;
 267 }
 268
 269 static void
 270 duplicate_option(const char *ptr)
 271 {
 272         fprintf(stderr, "Syntax error: "
 273             "Duplicate option: '%s'\n", ptr);
 274         exit(1);
 275 }
 276
 277 static void
 278 usage(void)
 279 {
 280         fprintf(stderr, ""
 281             "usbconfig - configure the USB subsystem" "\n"
 282             "usage: usbconfig -u <busnum> -a <devaddr> -i <ifaceindex> [cmds...]" "\n"
 283             "usage: usbconfig -d [ugen]<busnum>.<devaddr> -i <ifaceindex> [cmds...]" "\n"
 284             "commands:" "\n"
 285             "  set_config <cfg_index>" "\n"
 286             "  set_alt <alt_index>" "\n"
 287             "  set_template <template>" "\n"
 288             "  get_template" "\n"
 289             "  add_dev_quirk_vplh <vid> <pid> <lo_rev> <hi_rev> <quirk>" "\n"
 290             "  remove_dev_quirk_vplh <vid> <pid> <lo_rev> <hi_rev> <quirk>" "\n"
 291             "  add_quirk <quirk>" "\n"
 292             "  remove_quirk <quirk>" "\n"
 293             "  detach_kernel_driver" "\n"
 294             "  dump_quirk_names" "\n"
 295             "  dump_device_quirks" "\n"
 296             "  dump_all_desc" "\n"
 297             "  dump_device_desc" "\n"
 298             "  dump_curr_config_desc" "\n"
 299             "  dump_all_config_desc" "\n"
 300             "  dump_string <index>" "\n"
 301             "  dump_info" "\n"
 302             "  dump_stats" "\n"
 303             "  show_ifdrv" "\n"
 304             "  suspend" "\n"
 305             "  resume" "\n"
 306             "  power_off" "\n"
 307             "  power_save" "\n"
 308             "  power_on" "\n"
 309             "  reset" "\n"
 310             "  list" "\n"
 311             "  do_request <bmReqTyp> <bReq> <wVal> <wIdx> <wLen> <data...>" "\n"
 312         );
 313         exit(1);
 314 }
 315
 316 static void
 317 reset_options(struct options *opt)
 318 {
 319         if (opt->buffer)
 320                 free(opt->buffer);
 321         memset(opt, 0, sizeof(*opt));
 322         return;
 323 }
 324
 325 static void
 326 flush_command(struct libusb20_backend *pbe, struct options *opt)
 327 {
 328         struct libusb20_device *pdev = NULL;
 329         uint32_t matches = 0;
 330         uint8_t dump_any;
 331
 332         /* check for invalid option combinations */
 333         if ((opt->got_suspend +
 334             opt->got_resume +
 335             opt->got_reset +
 336             opt->got_set_config +
 337             opt->got_set_alt +
 338             opt->got_power_save +
 339             opt->got_power_on +
 340             opt->got_power_off) > 1) {
 341                 err(1, "can only specify one of 'set_config', "
 342                     "'set_alt', 'reset', 'suspend', 'resume', "
 343                     "'power_save', 'power_on' and 'power_off' "
 344                     "at the same time!");
 345         }
 346         if (opt->got_dump_quirk_names) {
 347                 opt->got_any--;
 348                 dump_be_quirk_names(pbe);
 349         }
 350         if (opt->got_dump_device_quirks) {
 351                 opt->got_any--;
 352                 dump_be_dev_quirks(pbe);
 353         }
 354         if (opt->got_remove_device_quirk) {
 355                 opt->got_any--;
 356                 be_dev_remove_quirk(pbe,
 357                     opt->vid, opt->pid, opt->lo_rev, opt->hi_rev, opt->quirkname);
 358         }
 359         if (opt->got_add_device_quirk) {
 360                 opt->got_any--;
 361                 be_dev_add_quirk(pbe,
 362                     opt->vid, opt->pid, opt->lo_rev, opt->hi_rev, opt->quirkname);
 363         }
 364         if (opt->got_set_template) {
 365                 opt->got_any--;
 366                 if (libusb20_be_set_template(pbe, opt->template)) {
 367                         fprintf(stderr, "Setting USB template %u failed, "
 368                             "continuing.\n", opt->template);
 369                 }
 370         }
 371         if (opt->got_get_template) {
 372                 opt->got_any--;
 373                 if (libusb20_be_get_template(pbe, &opt->template))
 374                         printf("USB template: <unknown>\n");
 375                 else
 376                         printf("USB template: %u\n", opt->template);
 377         }
 378         if (opt->got_any == 0) {
 379                 /*
 380                  * do not scan through all the devices if there are no valid
 381                  * options
 382                  */
 383                 goto done;
 384         }
 385         while ((pdev = libusb20_be_device_foreach(pbe, pdev))) {
 386
 387                 if (opt->got_bus &&
 388                     (libusb20_dev_get_bus_number(pdev) != opt->bus)) {
 389                         continue;
 390                 }
 391                 if (opt->got_addr &&
 392                     (libusb20_dev_get_address(pdev) != opt->addr)) {
 393                         continue;
 394                 }
 395                 matches++;
 396
 397                 if (opt->got_remove_quirk) {
 398                         struct LIBUSB20_DEVICE_DESC_DECODED *ddesc;
 399
 400                         ddesc = libusb20_dev_get_device_desc(pdev);
 401
 402                         be_dev_remove_quirk(pbe,
 403                             ddesc->idVendor, ddesc->idProduct,
 404                             ddesc->bcdDevice, ddesc->bcdDevice,
 405                             opt->quirkname);
 406                 }
 407
 408                 if (opt->got_add_quirk) {
 409                         struct LIBUSB20_DEVICE_DESC_DECODED *ddesc;
 410
 411                         ddesc = libusb20_dev_get_device_desc(pdev);
 412
 413                         be_dev_add_quirk(pbe,
 414                             ddesc->idVendor, ddesc->idProduct,
 415                             ddesc->bcdDevice, ddesc->bcdDevice,
 416                             opt->quirkname);
 417                 }
 418
 419                 if (libusb20_dev_open(pdev, 0)) {
 420                         err(1, "could not open device");
 421                 }
 422                 if (opt->got_dump_string) {
 423                         dump_string_by_index(pdev, opt->string_index);
 424                 }
 425                 if (opt->got_do_request) {
 426                         uint16_t actlen;
 427                         uint16_t t;
 428
 429                         if (libusb20_dev_request_sync(pdev, &opt->setup,
 430                             opt->buffer, &actlen, 5000 /* 5 seconds */ , 0)) {
 431                                 printf("REQUEST = <ERROR>\n");
 432                         } else if (!(opt->setup.bmRequestType &
 433                             LIBUSB20_ENDPOINT_IN)) {
 434                                 printf("REQUEST = <OK>\n");
 435                         } else {
 436                                 t = actlen;
 437                                 printf("REQUEST = <");
 438                                 for (t = 0; t != actlen; t++) {
 439                                         printf("0x%02x%s",
 440                                             ((uint8_t *)opt->buffer)[t],
 441                                             (t == (actlen - 1)) ? "" : " ");
 442                                 }
 443                                 printf("><");
 444                                 for (t = 0; t != actlen; t++) {
 445                                         char c;
 446
 447                                         c = ((uint8_t *)opt->buffer)[t];
 448                                         if ((c != '<') &&
 449                                             (c != '>') && isprint(c)) {
 450                                                 putchar(c);
 451                                         }
 452                                 }
 453                                 printf(">\n");
 454                         }
 455                 }
 456                 if (opt->got_set_config) {
 457                         if (libusb20_dev_set_config_index(pdev,
 458                             opt->config_index)) {
 459                                 err(1, "could not set config index");
 460                         }
 461                 }
 462                 if (opt->got_set_alt) {
 463                         if (libusb20_dev_set_alt_index(pdev, opt->iface,
 464                             opt->alt_index)) {
 465                                 err(1, "could not set alternate setting");
 466                         }
 467                 }
 468                 if (opt->got_reset) {
 469                         if (libusb20_dev_reset(pdev)) {
 470                                 err(1, "could not reset device");
 471                         }
 472                 }
 473                 if (opt->got_suspend) {
 474                         if (libusb20_dev_set_power_mode(pdev,
 475                             LIBUSB20_POWER_SUSPEND)) {
 476                                 err(1, "could not set suspend");
 477                         }
 478                 }
 479                 if (opt->got_resume) {
 480                         if (libusb20_dev_set_power_mode(pdev,
 481                             LIBUSB20_POWER_RESUME)) {
 482                                 err(1, "could not set resume");
 483                         }
 484                 }
 485                 if (opt->got_power_off) {
 486                         if (libusb20_dev_set_power_mode(pdev,
 487                             LIBUSB20_POWER_OFF)) {
 488                                 err(1, "could not set power OFF");
 489                         }
 490                 }
 491                 if (opt->got_power_save) {
 492                         if (libusb20_dev_set_power_mode(pdev,
 493                             LIBUSB20_POWER_SAVE)) {
 494                                 err(1, "could not set power SAVE");
 495                         }
 496                 }
 497                 if (opt->got_power_on) {
 498                         if (libusb20_dev_set_power_mode(pdev,
 499                             LIBUSB20_POWER_ON)) {
 500                                 err(1, "could not set power ON");
 501                         }
 502                 }
 503                 if (opt->got_detach_kernel_driver) {
 504                         if (libusb20_dev_detach_kernel_driver(pdev, opt->iface)) {
 505                                 err(1, "could not detach kernel driver");
 506                         }
 507                 }
 508                 dump_any =
 509                     (opt->got_dump_all_desc ||
 510                     opt->got_dump_device_desc ||
 511                     opt->got_dump_curr_config ||
 512                     opt->got_dump_all_config ||
 513                     opt->got_dump_info ||
 514                     opt->got_dump_stats);
 515
 516                 if (opt->got_list || dump_any) {
 517                         dump_device_info(pdev,
 518                             opt->got_show_iface_driver);
 519                 }
 520                 if (opt->got_dump_device_desc) {
 521                         printf("\n");
 522                         dump_device_desc(pdev);
 523                 }
 524                 if (opt->got_dump_all_config) {
 525                         printf("\n");
 526                         dump_config(pdev, 1);
 527                 } else if (opt->got_dump_curr_config) {
 528                         printf("\n");
 529                         dump_config(pdev, 0);
 530                 } else if (opt->got_dump_all_desc) {
 531                         printf("\n");
 532                         dump_device_desc(pdev);
 533                         dump_config(pdev, 1);
 534                 }
 535                 if (opt->got_dump_stats) {
 536                         printf("\n");
 537                         dump_device_stats(pdev);
 538                 }
 539                 if (dump_any) {
 540                         printf("\n");
 541                 }
 542                 if (libusb20_dev_close(pdev)) {
 543                         err(1, "could not close device");
 544                 }
 545         }
 546
 547         if (matches == 0) {
 548                 printf("No device match or lack of permissions.\n");
 549         }
 550 done:
 551         reset_options(opt);
 552
 553         return;
 554 }
 555
 556 int
 557 main(int argc, char **argv)
 558 {
 559         struct libusb20_backend *pbe;
 560         struct options *opt = &options;
 561         const char *ptr;
 562         int unit;
 563         int addr;
 564         int n;
 565         int t;
 566
 567         if (argc < 1) {
 568                 usage();
 569         }
 570         pbe = libusb20_be_alloc_default();
 571         if (pbe == NULL)
 572                 err(1, "could not access USB backend\n");
 573
 574         for (n = 1; n != argc; n++) {
 575
 576                 /* get number of additional options */
 577                 t = (argc - n - 1);
 578                 if (t > 255)
 579                         t = 255;
 580                 switch (get_token(argv[n], t)) {
 581                 case T_ADD_QUIRK:
 582                         if (opt->got_add_quirk) {
 583                                 flush_command(pbe, opt);
 584                         }
 585                         opt->quirkname = argv[n + 1];
 586                         n++;
 587
 588                         opt->got_add_quirk = 1;
 589                         opt->got_any++;
 590                         break;
 591
 592                 case T_REMOVE_QUIRK:
 593                         if (opt->got_remove_quirk) {
 594                                 flush_command(pbe, opt);
 595                         }
 596                         opt->quirkname = argv[n + 1];
 597                         n++;
 598
 599                         opt->got_remove_quirk = 1;
 600                         opt->got_any++;
 601                         break;
 602
 603                 case T_ADD_DEVICE_QUIRK:
 604                         if (opt->got_add_device_quirk) {
 605                                 flush_command(pbe, opt);
 606                         }
 607                         opt->vid = num_id(argv[n + 1], "Vendor ID");
 608                         opt->pid = num_id(argv[n + 2], "Product ID");
 609                         opt->lo_rev = num_id(argv[n + 3], "Low Revision");
 610                         opt->hi_rev = num_id(argv[n + 4], "High Revision");
 611                         opt->quirkname = argv[n + 5];
 612                         n += 5;
 613
 614                         opt->got_add_device_quirk = 1;
 615                         opt->got_any++;
 616                         break;
 617
 618                 case T_REMOVE_DEVICE_QUIRK:
 619                         if (opt->got_remove_device_quirk) {
 620                                 flush_command(pbe, opt);
 621                         }
 622                         opt->vid = num_id(argv[n + 1], "Vendor ID");
 623                         opt->pid = num_id(argv[n + 2], "Product ID");
 624                         opt->lo_rev = num_id(argv[n + 3], "Low Revision");
 625                         opt->hi_rev = num_id(argv[n + 4], "High Revision");
 626                         opt->quirkname = argv[n + 5];
 627                         n += 5;
 628                         opt->got_remove_device_quirk = 1;
 629                         opt->got_any++;
 630                         break;
 631
 632                 case T_DETACH_KERNEL_DRIVER:
 633                         if (opt->got_detach_kernel_driver)
 634                                 duplicate_option(argv[n]);
 635                         opt->got_detach_kernel_driver = 1;
 636                         opt->got_any++;
 637                         break;
 638
 639                 case T_DUMP_QUIRK_NAMES:
 640                         if (opt->got_dump_quirk_names)
 641                                 duplicate_option(argv[n]);
 642                         opt->got_dump_quirk_names = 1;
 643                         opt->got_any++;
 644                         break;
 645
 646                 case T_DUMP_DEVICE_QUIRKS:
 647                         if (opt->got_dump_device_quirks)
 648                                 duplicate_option(argv[n]);
 649                         opt->got_dump_device_quirks = 1;
 650                         opt->got_any++;
 651                         break;
 652
 653                 case T_SHOW_IFACE_DRIVER:
 654                         opt->got_show_iface_driver = 1;
 655                         break;
 656
 657                 case T_UGEN:
 658                         if (opt->got_any) {
 659                                 /* allow multiple commands on the same line */
 660                                 flush_command(pbe, opt);
 661                         }
 662                         ptr = argv[n + 1];
 663
 664                         if ((ptr[0] == 'u') &&
 665                             (ptr[1] == 'g') &&
 666                             (ptr[2] == 'e') &&
 667                             (ptr[3] == 'n'))
 668                                 ptr += 4;
 669
 670                         if ((sscanf(ptr, "%d.%d",
 671                             &unit, &addr) != 2) ||
 672                             (unit < 0) || (unit > 65535) ||
 673                             (addr < 0) || (addr > 65535)) {
 674                                 errx(1, "cannot "
 675                                     "parse '%s'", argv[n + 1]);
 676                         }
 677                         opt->bus = unit;
 678                         opt->addr = addr;
 679                         opt->got_bus = 1;
 680                         opt->got_addr = 1;
 681                         n++;
 682                         break;
 683
 684                 case T_UNIT:
 685                         if (opt->got_any) {
 686                                 /* allow multiple commands on the same line */
 687                                 flush_command(pbe, opt);
 688                         }
 689                         opt->bus = num_id(argv[n + 1], "busnum");
 690                         opt->got_bus = 1;
 691                         n++;
 692                         break;
 693                 case T_ADDR:
 694                         opt->addr = num_id(argv[n + 1], "addr");
 695                         opt->got_addr = 1;
 696                         n++;
 697                         break;
 698                 case T_IFACE:
 699                         opt->iface = num_id(argv[n + 1], "iface");
 700                         opt->got_iface = 1;
 701                         n++;
 702                         break;
 703                 case T_SET_CONFIG:
 704                         if (opt->got_set_config)
 705                                 duplicate_option(argv[n]);
 706                         opt->config_index = num_id(argv[n + 1], "cfg_index");
 707                         opt->got_set_config = 1;
 708                         opt->got_any++;
 709                         n++;
 710                         break;
 711                 case T_SET_ALT:
 712                         if (opt->got_set_alt)
 713                                 duplicate_option(argv[n]);
 714                         opt->alt_index = num_id(argv[n + 1], "cfg_index");
 715                         opt->got_set_alt = 1;
 716                         opt->got_any++;
 717                         n++;
 718                         break;
 719                 case T_SET_TEMPLATE:
 720                         if (opt->got_set_template)
 721                                 duplicate_option(argv[n]);
 722                         opt->template = get_int(argv[n + 1]);
 723                         opt->got_set_template = 1;
 724                         opt->got_any++;
 725                         n++;
 726                         break;
 727                 case T_GET_TEMPLATE:
 728                         if (opt->got_get_template)
 729                                 duplicate_option(argv[n]);
 730                         opt->got_get_template = 1;
 731                         opt->got_any++;
 732                         break;
 733                 case T_DUMP_ALL_DESC:
 734                         if (opt->got_dump_all_desc)
 735                                 duplicate_option(argv[n]);
 736                         opt->got_dump_all_desc = 1;
 737                         opt->got_any++;
 738                         break;
 739                 case T_DUMP_DEVICE_DESC:
 740                         if (opt->got_dump_device_desc)
 741                                 duplicate_option(argv[n]);
 742                         opt->got_dump_device_desc = 1;
 743                         opt->got_any++;
 744                         break;
 745                 case T_DUMP_CURR_CONFIG_DESC:
 746                         if (opt->got_dump_curr_config)
 747                                 duplicate_option(argv[n]);
 748                         opt->got_dump_curr_config = 1;
 749                         opt->got_any++;
 750                         break;
 751                 case T_DUMP_ALL_CONFIG_DESC:
 752                         if (opt->got_dump_all_config)
 753                                 duplicate_option(argv[n]);
 754                         opt->got_dump_all_config = 1;
 755                         opt->got_any++;
 756                         break;
 757                 case T_DUMP_INFO:
 758                         if (opt->got_dump_info)
 759                                 duplicate_option(argv[n]);
 760                         opt->got_dump_info = 1;
 761                         opt->got_any++;
 762                         break;
 763                 case T_DUMP_STATS:
 764                         if (opt->got_dump_stats)
 765                                 duplicate_option(argv[n]);
 766                         opt->got_dump_stats = 1;
 767                         opt->got_any++;
 768                         break;
 769                 case T_DUMP_STRING:
 770                         if (opt->got_dump_string)
 771                                 duplicate_option(argv[n]);
 772                         opt->string_index = num_id(argv[n + 1], "str_index");
 773                         opt->got_dump_string = 1;
 774                         opt->got_any++;
 775                         n++;
 776                         break;
 777                 case T_SUSPEND:
 778                         if (opt->got_suspend)
 779                                 duplicate_option(argv[n]);
 780                         opt->got_suspend = 1;
 781                         opt->got_any++;
 782                         break;
 783                 case T_RESUME:
 784                         if (opt->got_resume)
 785                                 duplicate_option(argv[n]);
 786                         opt->got_resume = 1;
 787                         opt->got_any++;
 788                         break;
 789                 case T_POWER_OFF:
 790                         if (opt->got_power_off)
 791                                 duplicate_option(argv[n]);
 792                         opt->got_power_off = 1;
 793                         opt->got_any++;
 794                         break;
 795                 case T_POWER_SAVE:
 796                         if (opt->got_power_save)
 797                                 duplicate_option(argv[n]);
 798                         opt->got_power_save = 1;
 799                         opt->got_any++;
 800                         break;
 801                 case T_POWER_ON:
 802                         if (opt->got_power_on)
 803                                 duplicate_option(argv[n]);
 804                         opt->got_power_on = 1;
 805                         opt->got_any++;
 806                         break;
 807                 case T_RESET:
 808                         if (opt->got_reset)
 809                                 duplicate_option(argv[n]);
 810                         opt->got_reset = 1;
 811                         opt->got_any++;
 812                         break;
 813                 case T_LIST:
 814                         if (opt->got_list)
 815                                 duplicate_option(argv[n]);
 816                         opt->got_list = 1;
 817                         opt->got_any++;
 818                         break;
 819                 case T_DO_REQUEST:
 820                         if (opt->got_do_request)
 821                                 duplicate_option(argv[n]);
 822                         LIBUSB20_INIT(LIBUSB20_CONTROL_SETUP, &opt->setup);
 823                         opt->setup.bmRequestType = num_id(argv[n + 1], "bmReqTyp");
 824                         opt->setup.bRequest = num_id(argv[n + 2], "bReq");
 825                         opt->setup.wValue = num_id(argv[n + 3], "wVal");
 826                         opt->setup.wIndex = num_id(argv[n + 4], "wIndex");
 827                         opt->setup.wLength = num_id(argv[n + 5], "wLen");
 828                         if (opt->setup.wLength != 0) {
 829                                 opt->buffer = malloc(opt->setup.wLength);
 830                         } else {
 831                                 opt->buffer = NULL;
 832                         }
 833
 834                         n += 5;
 835
 836                         if (!(opt->setup.bmRequestType &
 837                             LIBUSB20_ENDPOINT_IN)) {
 838                                 /* copy in data */
 839                                 t = (argc - n - 1);
 840                                 if (t < opt->setup.wLength) {
 841                                         err(1, "request data missing");
 842                                 }
 843                                 t = opt->setup.wLength;
 844                                 while (t--) {
 845                                         ((uint8_t *)opt->buffer)[t] =
 846                                             num_id(argv[n + t + 1], "req_data");
 847                                 }
 848                                 n += opt->setup.wLength;
 849                         }
 850                         opt->got_do_request = 1;
 851                         opt->got_any++;
 852                         break;
 853                 default:
 854                         if (n == 1) {
 855                                 ptr = argv[n];
 856
 857                                 if ((ptr[0] == 'u') &&
 858                                     (ptr[1] == 'g') &&
 859                                     (ptr[2] == 'e') &&
 860                                     (ptr[3] == 'n'))
 861                                         ptr += 4;
 862
 863                                 if ((sscanf(ptr, "%d.%d",
 864                                     &unit, &addr) != 2) ||
 865                                     (unit < 0) || (unit > 65535) ||
 866                                     (addr < 0) || (addr > 65535)) {
 867                                         usage();
 868                                         break;
 869                                 }
 870
 871                                 opt->bus = unit;
 872                                 opt->addr = addr;
 873                                 opt->got_bus = 1;
 874                                 opt->got_addr = 1;
 875                                 break;
 876                         }
 877                         usage();
 878                         break;
 879                 }
 880         }
 881         if (opt->got_any) {
 882                 /* flush out last command */
 883                 flush_command(pbe, opt);
 884         } else {
 885                 /* list all the devices */
 886                 opt->got_list = 1;
 887                 opt->got_any++;
 888                 flush_command(pbe, opt);
 889         }
 890         /* release data */
 891         libusb20_be_free(pbe);
 892
 893         return (0);
 894 }