erj [Thu, 11 Jun 2020 15:59:49 +0000 (15:59 +0000)]
em(4): Always reinit interface when adding/removing VLAN
This partially reverts r361053 since there have been reports
by users that this breaks some functionality for em(4)
devices; it seems at first glance that some sort of interface
restart is required for those cards.
This isn't a proper fix; this unbreaks those users until a proper
fix is found for their issues.
PR: 240818
Reported by: Marek Zarychta <zarychtam@plan-b.pwste.edu.pl>
MFC after: 3 days
mmel [Thu, 11 Jun 2020 12:53:22 +0000 (12:53 +0000)]
Fix grabbing of tegra uart.
An attempt to write to FCR register may corrupt transmit FIFO,
so we should wait for the FIFO to be empty before we can modify it.
avg [Thu, 11 Jun 2020 10:41:31 +0000 (10:41 +0000)]
rework how ZVOLs are updated in response to DSL operations
With this change all ZVOL updates are initiated from the SPA sync
context instead of a mix of the sync and open contexts. The updates are
queued to be applied by a dedicated thread in the original order. This
should ensure that ZVOLs always accurately reflect the corresponding
datasets. ZFS ioctl operations wait on the mentioned thread to complete
its work. Thus, the illusion of the synchronous ZVOL update is
preserved. At the same time, the SPA sync thread never blocks on ZVOL
related operations avoiding problems like reported in bug 203864.
This change is based on earlier work in the same direction: D7179 and
D14669 by Anthoine Bourgeois. D7179 tried to perform ZVOL operations
in the open context and that opened races between them. D14669 uses a
design very similar to this change but with different implementation
details.
This change also heavily borrows from similar code in ZoL, but there are
many differences too. See:
- https://github.com/zfsonlinux/zfs/commit/a0bd735adb1b1eb81fef10b4db102ee051c4d4ff
- https://github.com/zfsonlinux/zfs/issues/3681
- https://github.com/zfsonlinux/zfs/issues/2217
avg [Thu, 11 Jun 2020 05:34:31 +0000 (05:34 +0000)]
iicbb: rebuild the bit-banging algorithms using different primitives
I2C_SET was quite inflexible, it used too long delays as well as some
unnecessary delays. The new building blocks are iicbb_clockin and
iicbb_clockout. The former sets SDA and starts the high period of SCL,
the latter executes the low period of SCL. What happens during the high
phase depends on the operation. For writes we just hold both lines, for
reads we poll SDA. S, Sr and P change SDA in the middle of the high
period.
Also, the calculation of udelay has been updated, so that the resulting
period more closely corresponds the requested bus frequency. There is a
new knob, io_delay, that allows to further adjust udelay based on the
estimated latency of pin toggling operations.
Finally, I slightly changed debug tracing and added error indicators to
it. The debug prints are compiled in but disabled by default. This can
be of use if there is any fallout from this change.
Some ideas for further improvements:
- add a function for sub-microsecond delays (e.g., in units of 1/10th of
a microsecond) and use it for more precise timing of short delays;
- account for the actual time spent in the pin I/O.
Some sample debug output with the new code follows.
Reading temperature and humidity from HTU21 in the bus hold mode:
<<w80+ we3+ <w81+ .....r6d+ rac+ r94- >>
<<w80+ we5+ <w81+ .............r47+ re2+ r84- >>
where '<<' is S, '<' is Sr, '>>' is P, '.' is one millisecond of clock
stretching by the slave.
Reading temperature and humidity in the no-hold mode:
<<w80+ wf3+ >>
<<w81- >>
<<w81+ r6d+ r54+ raf- >>
<<w80+ wf5+ >>
<<w81- >>
<<w81+ r48+ r4e+ r9c- >>
where '+' is Ack and '-' is NoAck.
We see that first read attempts are not acknowledged.
markj [Wed, 10 Jun 2020 23:52:29 +0000 (23:52 +0000)]
Remove the FIRMWARE_MAX limit.
The firmware module arbitrarily limits us to at most 50 images. It is
possible to hit this limit on platforms that preload many firmware
images, or link all of the firmware images for a set of devices into the
kernel.
Convert the table into a linked list, removing the limit.
jhibbits [Wed, 10 Jun 2020 23:03:35 +0000 (23:03 +0000)]
powerpc/pmap: Fix pte_find_next() iterators for booke64 pmap
After r361988 fixed the reference count leak on booke64, it became possible
for an iteration somewhere in the middle of a page to become stale, with the
page vanishing (correctly) due to all PTEs on that page going away.
pte_find_next() would start at that iterator, and move along 'higher' order
directory pages until it finds a valid one, without zeroing out the lower
order pages. For instance:
/* Find next pte at or above 0x10002000. */
pte = pte_find_next(pmap, &(0x10002000));
pte_remove(pmap, pte);
/* This pte was the last reference in the page table page, page is
* gone.
*/
pte = pte_find_next(pmap, 0x10002000);
/* pte_find_next will see 0x10002000's page is gone, and jump to the
* next one, but starting iteration at the '0x2000' slot, skipping
* 0x0000 and 0x1000.
*/
This caused some processes, like git, to trip the KASSERT() in
pmap_release().
Fix this by zeroing all lower order iterators at each level.
kib [Wed, 10 Jun 2020 22:07:57 +0000 (22:07 +0000)]
amd64 pmap: reorder IPI send and local TLB flush in TLB invalidations.
Right now code first flushes all local TLB entries that needs to be
flushed, then signals IPI to remote cores, and then waits for
acknowledgements while spinning idle. In the VMWare article 'Don’t
shoot down TLB shootdowns!' it was noted that the time spent spinning
is lost, and can be more usefully used doing local TLB invalidation.
We could use the same invalidation handler for local TLB as for
remote, but typically for pmap == curpmap we can use INVLPG for locals
instead of INVPCID on remotes, since we cannot control context
switches on them. Due to that, keep the local code and provide the
callbacks to be called from smp_targeted_tlb_shootdown() after IPIs
are fired but before spin wait starts.
Reviewed by: alc, cem, markj, Anton Rang <rang at acm.org>
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D25188
gonzo [Wed, 10 Jun 2020 22:00:31 +0000 (22:00 +0000)]
Add mode selection to iMX6 IPU driver
- Configure ipu1_di0 tob e sourced from the VIDEO_PLL(PLL5) and hardcode
frequency to (455000000/3)Mhz. This value, further divided, can yield
frequencies close enough to support 1080p, 720p, 1024x768, and 640x480
modes. This is not ideal but it's an improvement comparing to the only
hardcoded 1024x768 mode.
- Fix memory leaks if attach method failed
- Print EDID when -v passed to the kernel
gonzo [Wed, 10 Jun 2020 21:38:35 +0000 (21:38 +0000)]
Fix reading EDID on TVs/monitors without E-DCC support
Writing segment id to I2C device 0x30 only required if the segment is
non-zero. On the devices without E-DCC support writing to that address
fails and whole transaction then fails too. To avoid this do
not attempt write to the segment selection device unless required.
jhb [Wed, 10 Jun 2020 21:18:19 +0000 (21:18 +0000)]
Adjust crypto_apply function callbacks for OCF.
- crypto_apply() is only used for reading a buffer to compute a
digest, so change the data pointer to a const pointer.
- To better match m_apply(), change the data pointer type to void *
and the length from uint16_t to u_int. The length field in
particular matters as none of the apply logic was splitting requests
larger than UINT16_MAX.
- Adjust the auth_xform Update callback to match the function
prototype passed to crypto_apply() and crypto_apply_buf(). This
removes the needs for casts when using the Update callback.
- Change the Reinit and Setkey callbacks to also use a u_int length
instead of uint16_t.
- Update auth transforms for the changes. While here, use C99
initializers for auth_hash structures and avoid casts on callbacks.
Reviewed by: cem
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D25171
chuck [Wed, 10 Jun 2020 20:12:45 +0000 (20:12 +0000)]
pci: loosen PCIe hot-plug requirements
The original PCIe hot-plug code required a couple of things which cause
PCI probing errors on the QEMU Q35 system and possibly physical systems
(Dell R6515).
Allocate the hot-plug interrupt as shared to support INTx interrupts.
The hot-plug interrupt mechanism should normally be MSI as PCIe mandates
MSI support, but QEMU's Q35 bridge only provides INTx interrupts.
Second, the code required the Electromechanical Interlock (Slot Status
EIS) to be engaged if present (Slot Capability EIP). Some platforms
including QEMU Q35 set EIP but not EIS. Fix by deleting the check.
adrian [Wed, 10 Jun 2020 18:59:46 +0000 (18:59 +0000)]
[net80211] ok ok if_xname won't ever be NULL.
Somewhere in net80211 if_xname is checked against NULL but it doesn't trigger
a compiler warning, but this does. So DTRT for FreeBSD and the other if_xname
derefences can be converted to this function at a later time.
trasz [Wed, 10 Jun 2020 18:50:46 +0000 (18:50 +0000)]
Make linux(4) set the openfiles soft resource limit to 1024 for Linux
applications, which often depend on this being the case. There's a new
sysctl, compat.linux.default_openfiles, to control this behaviour.
Reviewed by: kevans, emaste, bcr (manpages)
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D25177
trasz [Wed, 10 Jun 2020 18:43:43 +0000 (18:43 +0000)]
Support SO_SNDBUFFORCE/SO_RCVBUFFORCE by aliasing them to the
standard SO_SNDBUF/SO_RCVBUF. Mostly cosmetics, to get rid
of the warning during 'apt upgrade'.
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D25173
andrew [Wed, 10 Jun 2020 09:31:37 +0000 (09:31 +0000)]
Fix the efi serial console in the Arm models.
On some UEFI implementations the ConsOut EFI variable is not a device
path end type so we never move to the next node. Fix this by always
incrementing the device path node pointer, with a sanity check that
the node length is large enough so no two nodes overlap.
While here return failure on malloc failure rather than a NULL pointer
dereference.
melifaro [Wed, 10 Jun 2020 07:46:22 +0000 (07:46 +0000)]
Switch rtsock code to using newly-create rib_action() KPI call.
This simplifies the code and allows to further split rtentry and nexthop,
removing one of the blockers for multipath code introduction, described in
D24141.
rscheff [Wed, 10 Jun 2020 07:32:02 +0000 (07:32 +0000)]
Prevent TCP Cubic to abruptly increase cwnd after app-limited
Cubic calculates the new cwnd based on absolute time
elapsed since the start of an epoch. A cubic epoch is
started on congestion events, or once the congestion
avoidance phase is started, after slow-start has
completed.
When a sender is application limited for an extended
amount of time and subsequently a larger volume of data
becomes ready for sending, Cubic recalculates cwnd
with a lingering cubic epoch. This recalculation
of the cwnd can induce a massive increase in cwnd,
causing a burst of data to be sent at line rate by
the sender.
This adds a flag to reset the cubic epoch once a
session transitions from app-limited to cwnd-limited
to prevent the above effect.
jhibbits [Wed, 10 Jun 2020 04:08:16 +0000 (04:08 +0000)]
powerpc/powernv: Don't use the vmem quantum cache for OPAL PCI MSI allocations
vmem quantum cache is only needed when doing a lot of concurrent allocations,
which doesn't happen when allocating MSIs. This wastes memory for the cache
zones. Avoid this waste and don't use the quantum cache.
rmacklem [Wed, 10 Jun 2020 02:51:39 +0000 (02:51 +0000)]
Add two functions that create M_EXTPG mbufs with anonymous pages.
These two functions are needed by nfs-over-tls, but could also be
useful for other purposes.
mb_alloc_ext_plus_pages() - Allocates a M_EXTPG mbuf and enough anonymous
pages to store "len" data bytes.
mb_mapped_to_unmapped() - Copies the data from a list of mapped (non-M_EXTPG)
mbufs into a list of M_EXTPG mbufs allocated with anonymous pages.
This is roughly the inverse of mb_unmapped_to_ext().
kevans [Wed, 10 Jun 2020 01:32:13 +0000 (01:32 +0000)]
execvPe: obviate the need for potentially large stack allocations
Some environments in which execvPe may be called have a limited amount of
stack available. Currently, it avoidably allocates a segment on the stack
large enough to hold PATH so that it may be mutated and use strsep() for
easy parsing. This logic is now rewritten to just operate on the immutable
string passed in and do the necessary math to extract individual paths,
since it will be copying out those segments to another buffer anyways and
piecing them together with the name for a full path.
Additional size is also needed for the stack in posix_spawnp(), because it
may need to push all of argv to the stack and rebuild the command with sh in
front of it. We'll make sure it's properly aligned for the new thread, but
future work should likely make rfork_thread a little easier to use by
ensuring proper alignment.
Some trivial cleanup has been done with a couple of error writes, moving
strings into char arrays for use with the less fragile sizeof().
Reported by: Andrew Gierth <andrew_tao173.riddles.org.uk>
Reviewed by: jilles, kib, Andrew Gierth
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D25038
kevans [Wed, 10 Jun 2020 01:30:37 +0000 (01:30 +0000)]
execvp: fix up the ENOEXEC fallback
If execve fails with ENOEXEC, execvp is expected to rebuild the command
with /bin/sh instead and try again.
The previous version did this, but overlooked two details:
argv[0] can conceivably be NULL, in which case memp would never get
terminated. We must allocate no less than three * sizeof(char *) so we can
properly terminate at all times. For the non-NULL argv standard case, we
count all the non-NULL elements and actually skip the first argument, so we
end up capturing the NULL terminator in our bcopy().
The second detail is that the spec is actually worded such that we should
have been preserving argv[0] as passed to execvp:
"[...] executed command shall be as if the process invoked the sh utility
using execl() as follows:
where <shell path> is an unspecified pathname for the sh utility, file is
the process image file, and for execvp(), where arg0, arg1, and so on
correspond to the values passed to execvp() in argv[0], argv[1], and so on."
So we make this change at this time as well, while we're already touching
it. We decidedly can't preserve a NULL argv[0] as this would be incredibly,
incredibly fragile, so we retain our legacy behavior of using "sh" for
argv[] in this specific instance.
Some light tests are added to try and detect some components of handling the
ENOEXEC fallback; posix_spawnp_enoexec_fallback_null_argv0 is likely not
100% reliable, but it at least won't raise false-alarms and it did result in
useful failures with pre-change libc on my machine.
This is a secondary change in D25038.
Reported by: Andrew Gierth <andrew_tao173.riddles.org.uk>
Reviewed by: jilles, kib, Andrew Gierth
MFC after: 1 week
jhb [Tue, 9 Jun 2020 22:26:07 +0000 (22:26 +0000)]
Add a crypto capability flag for accelerated software drivers.
Use this in GELI to print out a different message when accelerated
software such as AESNI is used vs plain software crypto.
While here, simplify the logic in GELI a bit for determing which type
of crypto driver was chosen the first time by examining the
capabilities of the matched driver after a single call to
crypto_newsession rather than making separate calls with different
flags.
jhibbits [Tue, 9 Jun 2020 21:59:13 +0000 (21:59 +0000)]
powerpc/pmap: Fix wired memory leak in booke64 page directories
Properly handle reference counts in the 64-bit pmap page directories.
Otherwise all page table pages would leak due to over-referencing. This
would cause a quick enter to swap on a desktop system (AmigaOne X5000) when
quitting and rerunning applications, or just building world.
Add an INVARIANTS check to validate no leakage at pmap release time.
rscheff [Tue, 9 Jun 2020 21:07:58 +0000 (21:07 +0000)]
Prevent TCP Cubic to abruptly increase cwnd after slow-start
Introducing flags to track the initial Wmax dragging and exit
from slow-start in TCP Cubic. This prevents sudden jumps in the
caluclated cwnd by cubic, especially when the flow is application
limited during slow start (cwnd can not grow as fast as expected).
The downside is that cubic may remain slightly longer in the
concave region before starting the convex region beyond Wmax again.
andreast [Tue, 9 Jun 2020 20:27:35 +0000 (20:27 +0000)]
Fix boot of wandquad after DTS update
In the recent dts sync the name of the aips-bus@ changed to bus@. Reflect
this change and add an additional OF_finddevice in fix_fdt_interrupt_data()
and in fix_fdt_iomuxc_data() with bus@ only. Iow, keep the old naming for
compatibility.
dougm [Tue, 9 Jun 2020 20:19:11 +0000 (20:19 +0000)]
To reduce the size of an rb_node, drop the color field. Set the least
significant bit in the pointer to the node from its parent to indicate
that the node is red. Have the tree rotation macros leave the
old-parent/new-child node red and the new-parent/old-child node black.
This change makes RB_LEFT and RB_RIGHT no longer assignable, and
RB_COLOR no longer defined. Any code that modifies the tree or
examines a node color would have to be modified after this change.
vmaffione [Tue, 9 Jun 2020 19:15:43 +0000 (19:15 +0000)]
iflib: netmap: honor netmap_irx_irq return values
In the receive interrupt routine, always call netmap_rx_irq().
The latter function will return != NM_IRQ_PASS if netmap is not
active on that specific receive queue, so that the driver can go
on with iflib_rxeof(). Note that netmap supports partial opening,
where only a subset of the RX or TX rings can be open in netmap mode.
Checking the IFCAP_NETMAP flag is not enough to make sure that the
queue is indeed in netmap mode.
Moreover, in case netmap_rx_irq() returns NM_IRQ_RESCHED, it means
that netmap expects the driver to call netmap_rx_irq() again as soon
as possible. Currently, this may happen when the device is attached
to a VALE switch.
kevans [Tue, 9 Jun 2020 17:17:43 +0000 (17:17 +0000)]
libusb: improve compatibility
Specifically, add LIBUSB_CLASS_PHYSICAL and the libusb_has_capability API.
Descriptions and functionality for these derived from the
documentation at [0]. The current set of capabilities are all supported by
libusb.
These were detected as missing after updating net/freerdp to 2.1.1, which
attempted to use both.
jhb [Tue, 9 Jun 2020 16:43:23 +0000 (16:43 +0000)]
Refactor ptrace() ABI compatibility.
Add a freebsd32_ptrace() and move as many freebsd32 shims as possible
to freebsd32_ptrace(). Aside from register sets, freebsd32 passes
pointers to native structures to kern_ptrace() and converts to/from
native/32-bit structure formats in freebsd32_ptrace() outside of
kern_ptrace().
[PATCH 3/3] WPS UPnP: Handle HTTP initiation failures for events more
properly
While it is appropriate to try to retransmit the event to another
callback URL on a failure to initiate the HTTP client connection, there
is no point in trying the exact same operation multiple times in a row.
Replve the event_retry() calls with event_addr_failure() for these cases
to avoid busy loops trying to repeat the same failing operation.
These potential busy loops would go through eloop callbacks, so the
process is not completely stuck on handling them, but unnecessary CPU
would be used to process the continues retries that will keep failing
for the same reason.
Obtained from: https://w1.fi/security/2020-1/\
0003-WPS-UPnP-Handle-HTTP-initiation-failures-for-events-.patch
MFC after: 3 days
Security: VU#339275 and CVE-2020-12695
[PATCH 2/3] WPS UPnP: Fix event message generation using a long URL path
More than about 700 character URL ended up overflowing the wpabuf used
for building the event notification and this resulted in the wpabuf
buffer overflow checks terminating the hostapd process. Fix this by
allocating the buffer to be large enough to contain the full URL path.
However, since that around 700 character limit has been the practical
limit for more than ten years, start explicitly enforcing that as the
limit or the callback URLs since any longer ones had not worked before
and there is no need to enable them now either.
Obtained from: https://w1.fi/security/2020-1/\
0002-WPS-UPnP-Fix-event-message-generation-using-a-long-U.patch
MFC after: 3 days
Security: VU#339275 and CVE-2020-12695
[PATCH 1/3] WPS UPnP: Do not allow event subscriptions with URLs to
other networks
The UPnP Device Architecture 2.0 specification errata ("UDA errata
16-04-2020.docx") addresses a problem with notifications being allowed
to go out to other domains by disallowing such cases. Do such filtering
for the notification callback URLs to avoid undesired connections to
external networks based on subscriptions that any device in the local
network could request when WPS support for external registrars is
enabled (the upnp_iface parameter in hostapd configuration).
Obtained from: https://w1.fi/security/2020-1/\
0001-WPS-UPnP-Do-not-allow-event-subscriptions-with-URLs-.patch
MFC after: 3 days
Security: VU#339275 and CVE-2020-12695
rmacklem [Tue, 9 Jun 2020 05:01:23 +0000 (05:01 +0000)]
Fix a bug where XU_NGROUPS + 1 groups might be copied.
r361780 fixed the code so that it would only remove the duplicate when
it actually existed. However, that might have resulted in XU_NGROUPS + 1
groups being copied, running off the end of the array. This patch fixes
the problem.
Spotted during code inspection for other mountd changes.
markj [Mon, 8 Jun 2020 22:29:52 +0000 (22:29 +0000)]
Stop computing a "sharedram" value when emulating Linux sysinfo(2).
The previous code was computing an incorrect value in a very expensive
manner. "sharedram" is supposed to be the amount of memory used by
named swap objects, which on FreeBSD basically corresponds to memory
usage by shared memory objects (including, for example, GEM objects) and
tmpfs. We currently have no cheap way to count such pages. The
previous code tried to determine the number of copy-on-write pages
shared between processes.
Just replace the computed value with 0. illumos reportedly does the
same thing. Linux itself did not populate this field until a 2014
commit, "mm: export NR_SHMEM via sysinfo(2) / si_meminfo() interfaces".
jrtc27 [Mon, 8 Jun 2020 21:51:36 +0000 (21:51 +0000)]
virtio: Support non-legacy network device and queue
The non-legacy interface always defines num_buffers in the header,
regardless of whether VIRTIO_NET_F_MRG_RXBUF, just leaving it unused. We
also need to ensure our virtqueue doesn't filter out VIRTIO_F_VERSION_1
during negotiation, as it supports non-legacy transports just fine. This
fixes network packet transmission on TinyEMU.
jrtc27 [Mon, 8 Jun 2020 21:49:42 +0000 (21:49 +0000)]
virtio_mmio: Negotiate the upper half of the feature bits too
The feature bits are exposed as a 32-bit register with 2 banks, so we
should negotiate both halves. Notably, VIRTIO_F_VERSION_1 is in the
upper half, and will be used in an upcoming commit.
The PCI bus driver also has this bug, but the legacy BAR layout did not
include selector registers and is rather different from the modern
layout, so it remains solely as legacy.
Add ICL_NOCOPY flag to icl_pdu_append_data(), specifying that the method
can just reference the data buffer instead of immediately copying it.
Extend the offload KPI with optional PDU queue method, allowing to specify
completion callback, called when all the data referenced by above has been
transferred and won't be accessed any more (the buffers can be freed).
Implement the above functionality in software iSCSI driver using mbufs
with external storage and reference counter. Note that some NICs (ixl(4))
may keep the mbuf in TX queue for a long time, so CTL has to be ready.
Add optional method to struct ctl_scsiio for buffer reference counting.
Implement it for CTL block backend, allowing to delay free of the struct
ctl_be_block_io and memory it references as needed. In first reincarnation
of the patch I tried to delay whole I/O as it is done for FibreChannel,
that was cleaner, but due to the above callback delays I had to rewrite
it this way to not leave LUN referenced potentially for hours or more.
All together on sequential read from ZFS ARC this saves about 30% of CPU
time and memory bandwidth by avoiding one of 3 memory copies (the other
two are from ZFS ARC to DMU cache and then from DMU cache to CTL buffers).
On tests with 2x Xeon Silver 4114 this allows to reach full line rate of
100GigE NIC. Tests with Gold CPUs and two 100GigE NICs are stil TBD,
but expectations to saturate them are pretty high. ;)
Discussed with: Chelsio
Sponsored by: iXsystems, Inc.
gonzo [Mon, 8 Jun 2020 20:28:32 +0000 (20:28 +0000)]
Add VHDX support to mkimg(1)
VHDX is the successor of Microsoft's VHD file format. It increases
maximum capacity of the virtual drive to 64TB and introduces features
to better handle power/system failures.
VHDX is the required format for 2nd generation Hyper-V VMs.
jrtc27 [Mon, 8 Jun 2020 17:57:21 +0000 (17:57 +0000)]
riscv: Use SBI shutdown call to implement RB_POWEROFF
Currently we only call sbi_shutdown in cpu_reset, which means we reach
"Please press any key to reboot." even when RB_POWEROFF is set, and only
once the user presses a key do we then shutdown. Instead, register a
shutdown_final event handler and make an SBI shutdown call if
RB_POWEROFF is set.
emaste [Mon, 8 Jun 2020 16:11:44 +0000 (16:11 +0000)]
crashinfo: stop looking for gdb in /usr/bin/gdb
As of r359457 we removed the GDB_LIBEXEC option, always installing in-tree
gdb into /usr/libexec/. Thus, there is now no need for crashinfo to include
/usr/bin/gdb in the list of pathnames to check when looking for gdb.
rrs [Mon, 8 Jun 2020 11:48:07 +0000 (11:48 +0000)]
An important statistic in determining if a server process (or client) is being delayed
is to know the time to first byte in and time to first byte out. Currently we
have no way to know these all we have is t_starttime. That (t_starttime) tells us
what time the 3 way handshake completed. We don't know when the first
request came in or how quickly we responded. Nor from a client perspective
do we know how long from when we sent out the first byte before the
server responded.
This small change adds the ability to track the TTFB's. This will show up in
BB logging which then can be pulled for later analysis. Note that currently
the tracking is via the ticks variable of all three variables. This provides
a very rough estimate (hz=1000 its 1ms). A follow-on set of work will be
to change all three of these values into something with a much finer resolution
(either microseconds or nanoseconds), though we may want to make the resolution
configurable so that on lower powered machines we could still use the much
cheaper ticks variable.
Sponsored by: Netflix Inc.
Differential Revision: https://reviews.freebsd.org/D24902
arichardson [Mon, 8 Jun 2020 08:52:02 +0000 (08:52 +0000)]
RISC-V: Check that the DTB doesn't overlap with kernel
This can happen with very large kernels (e.g. ones embedding a root
filesystem). The DTB written by OpenSBI/BBL is quite small so this is
unlikely to hit important data, but if it does this can result in very
confusing and hard-to-debug crashes. Add a KASSERT() and a verbose print
to catch this problem with debug kernels.
While this will not print any output by default if it fails (that would
depend on EARLY_PRINTF), at least the kernel now halts reliably instead
of randomly crashing.
arichardson [Mon, 8 Jun 2020 08:51:52 +0000 (08:51 +0000)]
RISC-V: handle DTB aligned to less than 2MB
By default OpenSBI and BBL will pass the DTB at a 2MB-aligned address.
However, by default there are no 2MB aligned regions between the SBI and
the kernel, so we have to choose a 2MB aligned region after the kernel.
OpenSBI defaults to placing the DTB 32MB after the start of the kernel but
this is not sufficient for a kernel with a large MFS embedded.
We could increase this offset to a larger number (e.g. 64/128/256) but that
imposes restrictions on the minimum RAM size.
Another solution would be to place the DTB between OpenSBI and the kernel
at 1MB alignment, but current locore.S code assumes 2MB alignment.
With this change I can now boot on QEMU with an OpenSBI configured to
store the DTB at an offset of 1MB.
See also https://github.com/riscv/opensbi/issues/169
jhibbits [Mon, 8 Jun 2020 02:28:00 +0000 (02:28 +0000)]
powerpc/powernv: Don't configure disabled CPUs
If the POWER firmware detects a bad CPU core, it will "GUARD" it out,
marking it disabled. Any attempt to spin up a bad CPU will trigger a panic
later on when waiting for threads on said core to wake up. Support limping
along on fewer cores instead.
cem [Mon, 8 Jun 2020 00:46:19 +0000 (00:46 +0000)]
x86 boot.8: Remove obsolescent non-loader x86 boot documentation
x86 boot uses loader(8) and the boot2-direct-to-kernel process is not
supported. Remove the documentation, which doesn't document a working
process and leads to confusion.
tuexen [Sun, 7 Jun 2020 14:39:20 +0000 (14:39 +0000)]
Retire SCTP_SO_LOCK_TESTING.
This was intended to test the locking used in the MacOS X kernel on a
FreeBSD system, to make use of WITNESS and other debugging infrastructure.
This hasn't been used for ages, to take it out to reduce the #ifdef
complexity.
projects / FreeBSD / FreeBSD.git / log