manu [Thu, 17 May 2018 16:21:12 +0000 (16:21 +0000)]
release: arm: Format FAT partition as FAT16
r332674 raised the size of the FAT partition from 2MB to 41MB for some
boards. But we format them in FAT12 and this size appears to be to big
for FAT12 and some SoC bootrom cannot cope with that.
Format the msdosfs partition as FAT16,
trasz [Thu, 17 May 2018 15:19:29 +0000 (15:19 +0000)]
Fix off-by-one in usb_decode_str_desc(). Previously it would decode
one character too many. Note that this function is only used to decode
string descriptors generated by the kernel itself.
Reviewed by: hselasky@
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
sbruno [Thu, 17 May 2018 14:55:41 +0000 (14:55 +0000)]
Retire vxge(4).
This driver was merged to HEAD one week prior to Exar publicly announcing they
had left the Ethernet market. It is not known to be used and has various code
quality issues spotted by Brooks and Hiren. Retire it in preparation for
FreeBSD 12.0.
manu [Thu, 17 May 2018 14:51:22 +0000 (14:51 +0000)]
aw_spi: Fix some silly clock mistake
The module uses the mod clock and not the ahb one.
We need to set the mod clock to twice the speed requested as the smallest
divider in the controller is 2.
The clock test function weren't calculating the register value best on the
best div but on the max one.
The cdr2 test function was using the cdr1 formula.
dim [Thu, 17 May 2018 14:38:58 +0000 (14:38 +0000)]
Pull in r322325 from upstream llvm trunk (by Matthias Braun):
PeepholeOpt cleanup/refactor; NFC
- Less unnecessary use of `auto`
- Add early `using RegSubRegPair(AndIdx) =` to avoid countless
`TargetInstrInfo::` qualifications.
- Use references instead of pointers where possible.
- Remove unused parameters.
- Rewrite the CopyRewriter class hierarchy:
- Pull out uncoalescable copy rewriting functionality into
PeepholeOptimizer class.
- Use an abstract base class to make it clear that rewriters are
independent.
- Remove unnecessary \brief in doxygen comments.
- Remove unused constructor and method from ValueTracker.
- Replace UseAdvancedTracking of ValueTracker with DisableAdvCopyOpt
use.
Even though upstream marked this as "No Functional Change", it does
contain some functional changes, and these fix a compiler hang for one
particular source file in the devel/godot port.
emaste [Thu, 17 May 2018 14:04:59 +0000 (14:04 +0000)]
Add driver for Microchip LAN78xx USB3-GigE controller
This driver supports two Microchip USB-Ethernet controllers:
LAN7800 USB 3.1 to 10/100/1000 Mbps Ethernet
LAN7515 USB 2 to 10/100/1000 Mbps Ethernet with built-in USB hub
The LAN7515 is the Ethernet controller on the Raspberry Pi 3B+.
At present there is no datasheet for the LAN7515, but it is effectively
a USB 2 hub combined with a LAN7800 controller. A comprehensive LAN7800
datasheet is at http://www.microchip.com/wwwproducts/en/LAN7800.
This driver is based on the structure of the smsc(4) driver which
supports Microchip/SMSC's LAN95xx family. (Microchip acquired SMSC
in May 2012.) The Linux lan78xx driver served as a reference for some
functionality and registers.
The 'muge' driver name comes from "Microchip USB Gigabit Ethernet".
I made some style adjustments and minor edits to Arshan's submission.
It will be connected to the build after additional review and testing.
Thanks to Microchip for providing a number of Evaluation Boards (EVBs)
for development and testing.
Submitted by: Arshan Khanifar
Reviewed by: hselasky (earlier)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D15168
manu [Thu, 17 May 2018 10:19:52 +0000 (10:19 +0000)]
allwinner: Add h3 spi driver
This driver is compatible with H3/H5/A64.
Test was done on the OrangePi-PC2 board (H5 based), which have a mx25l1606e
spi flash on it, by writing u-boot image, reading it and booting from the spi.
There is still room for improvement especially on reading using the controller
automatic burst which will avoid us to write dummy data to the TX FIFO.
DMA is also not supported as we currently don't support the DMA controller on
those SoCs
Only add a kernel module for it.
avg [Thu, 17 May 2018 10:16:20 +0000 (10:16 +0000)]
fix a problem with bad performance after wakeup caused by r333321
This change reverts a "while here" part of r333321 that moved clearing
of suspended_cpus to an earlier place.
Apparently, there can be a problem when modifying (shared) memory before
restoring proper cache attributes. So, to be safe, move the clearing to
the old place.
Many thanks to Johannes Lundberg for bisecting the changes to that
particular commit and then bisecting the commit to the particular
change.
Reported by: many
Debugged by: Johannes Lundberg <johalun0@gmail.com>
MFC after: 1 week
X-MFC with: r333321
markj [Thu, 17 May 2018 04:08:57 +0000 (04:08 +0000)]
Fix netdump configuration when VIMAGE is enabled.
We need to set the current vnet before iterating over the global
interface list. Because the dump device may only be set from the host,
only proceed with configuration if the thread belongs to the default
vnet. [1]
Also fix a resource leak that occurs if the priv_check() in set_dumper()
fails.
lstewart [Thu, 17 May 2018 02:46:27 +0000 (02:46 +0000)]
Plug a memory leak and potential NULL-pointer dereference introduced in r331214.
Each TCP connection that uses the system default cc_newreno(4) congestion
control algorithm module leaks a "struct newreno" (8 bytes of memory) at
connection initialisation time. The NULL-pointer dereference is only germane
when using the ABE feature, which is disabled by default.
While at it:
- Defer the allocation of memory until it is actually needed given that ABE is
optional and disabled by default.
- Document the ENOMEM errno in getsockopt(2)/setsockopt(2).
- Document ENOMEM and ENOBUFS in tcp(4) as being synonymous given that they are
used interchangeably throughout the code.
- Fix a few other nits also accidentally omitted from the original patch.
np [Thu, 17 May 2018 01:42:18 +0000 (01:42 +0000)]
cxgbe(4): Allocate offload Tx queues when a card has resources
provisioned for NIC_ETHOFLD and the kernel has option RATELIMIT.
It is possible to use the chip's offload queues for normal NIC Tx and
not just TOE Tx. The difference is that these queues support out of
order processing of work requests and have a per-"flowid" mechanism for
tracking credits between the driver and hardware. This allows Tx for
any number of flows bound to different rate limits to be submitted to a
single Tx queue and the work requests for slow flows won't cause HOL
blocking for the rest.
np [Thu, 17 May 2018 00:52:48 +0000 (00:52 +0000)]
cxgbe(4): Add NIC_ETHOFLD to the NIC capabilities allowed by the driver
by default.
This is the first of a series of commits that will add support for
RATELIMIT kernel option to the base if_cxgbe driver, for use with
ordinary NIC traffic "flows". RATELIMIT is already supported by t4_tom
for the fully-offloaded TCP connections that it handles.
mckusick [Wed, 16 May 2018 23:30:03 +0000 (23:30 +0000)]
Revert change made in base r171522
(https://svnweb.freebsd.org/base?view=revision&revision=304232)
converting clrbuf() (which clears the entire buffer) to vfs_bio_clrbuf()
(which clears only the new pages that have been added to the buffer).
Failure to properly remove pages from the buffer cache can make
pages that appear not to need clearing to actually have bad random
data in them. See for example base r304232
(https://svnweb.freebsd.org/base?view=revision&revision=304232)
which noted the need to set B_INVAL and B_NOCACHE as well as clear
the B_CACHE flag before calling brelse() to release the buffer.
Rather than trying to find all the incomplete brelse() calls, it
is simpler, though more slightly expensive, to simply clear the
entire buffer when it is newly allocated.
mmacy [Wed, 16 May 2018 22:29:20 +0000 (22:29 +0000)]
hwpmc: Implement per-thread counters for PMC sampling
This implements per-thread counters for PMC sampling. The thread
descriptors are stored in a list attached to the process descriptor.
These thread descriptors can store any per-thread information necessary
for current or future features. For the moment, they just store the counters
for sampling.
The thread descriptors are created when the process descriptor is created.
Additionally, thread descriptors are created or freed when threads
are started or stopped. Because the thread exit function is called in a
critical section, we can't directly free the thread descriptors. Hence,
they are freed to a cache, which is also used as a source of allocations
when needed for new threads.
shurd [Wed, 16 May 2018 21:03:22 +0000 (21:03 +0000)]
Work around lack of TX IRQs in iflib for netmap
When poll() is called via netmap, txsync is initially called,
and if there are no available buffers to reclaim, it waits for the driver
to notify of new buffers. Since the TX IRQ is generally not used in iflib
drivers, this ends up causing a timeout.
Work around this by having the reclaim DELAY(1) if it's initially unable
to reclaim anything, then schedule the tx task, which will spin by
continuously rescheduling itself until some buffers are reclaimed. In
general, the delay is enough to allow some buffers to be reclaimed, so
spinning is minimized.
np [Wed, 16 May 2018 17:55:16 +0000 (17:55 +0000)]
cxgbe(4): Fall back to a failsafe configuration built into the firmware
if an error is reported while pre-processing the configuration file that
the driver attempted to use.
Also, allow the user to explicitly use the built-in configuration with
hw.cxgbe.config_file="built-in"
MFC after: 2 days
Sponsored by: Chelsio Communications
dumbbell [Wed, 16 May 2018 10:08:50 +0000 (10:08 +0000)]
vt(4): Resume vt_timer() in vtterm_post_input() only
There is no need to try to resume it after each smaller operations
(putchar, cursor_position, copy, fill).
The resume function already checks if the timer is armed before doing
anything, but it uses an atomic cmpset which is expensive. And resuming
the timer at the end of input processing is enough.
While here, we also skip timer resume if the input is for another
windows than the currently displayed one. I.e. if `ttyv0` is currently
displayed, any changes to `ttyv1` shouldn't resume the timer (which
would refresh `ttyv0`).
By doing the same benchmark as r333669, I get:
* vt(4), before r333669: 1500 ms
* vt(4), with this patch: 760 ms
* syscons(4): 700 ms
The situation was even worse when the vtterm_copy() and vtterm_fill()
callbacks were involved.
The new callbacks are:
* struct terminal_class->tc_pre_input()
* struct terminal_class->tc_post_input()
They are called in teken_input(), surrounding the while() loop.
The goal is to improve input processing speed of vt(4). As a benchmark,
here is the time taken to write a text file of 360 000 lines (26 MiB) on
`ttyv0`:
* vt(4), unmodified: 1500 ms
* vt(4), with this patch: 1200 ms
* syscons(4): 700 ms
This is on a Haswell laptop with a GENERIC-NODEBUG kernel.
At the same time, the locking is changed in the vt_flush() function
which is responsible to draw the text on screen. So instead of
(indirectly) using VTBUF_LOCK() just to read and reset the dirty area
of the internal buffer, the lock is held for about the entire function,
including the drawing part.
The change is mostly visible while content is scrolling fast: before,
lines could appear garbled while scrolling because the internal buffer
was accessed without locks (once the scrolling was finished, the output
was correct). Now, the scrolling appears correct.
In the end, the locking model is closer to what syscons(4) does.
avg [Wed, 16 May 2018 06:52:08 +0000 (06:52 +0000)]
followup to r332730/r332752: set kdb_why to "trap" for fatal traps
This change updates arm, arm64 and mips achitectures. Additionally, it
removes redundant checks for kdb_active where it already results in
kdb_reenter() and adds kdb_reenter() calls where they were missing.
Some architectures check the return value of kdb_trap(), but some don't.
I haven't changed any of that.
Some trap handling routines have a return code. I am not sure if I
provided correct ones for returns after kdb_reenter(). kdb_reenter
should never return unless kdb_jmpbufp is NULL for some reason.
Only compile tested for all affected architectures. There can be bugs
resulting from my poor understanding of architecture specific details.
emaste [Wed, 16 May 2018 02:15:18 +0000 (02:15 +0000)]
Clarify that boot_mute / boot -m mutes kernel console only
Perhaps RB_MUTE could mute user startup (rc) output as well, but right
now it mutes only kernel console output, so make the documentation match
reality.
emaste [Wed, 16 May 2018 01:55:52 +0000 (01:55 +0000)]
intel-ucode-split: list platform ids based on processor_flags
The Intel CPU "Platform Id" is a 3-bit integer reported by a given MSR.
Intel microcode updates have an 8-bit field to indicate Platform Id
compatibility - one bit in the mask for each of the possible Platform Id
values. To simplify interpretation, report the Platform Id mask also as
a list.
emaste [Wed, 16 May 2018 01:33:48 +0000 (01:33 +0000)]
Force WITHOUT_FREEBSD_UPDATE when WITHOUT_PORTSNAP is set
freebsd-update depends on phttpget from portsnap. We could move phttpget
out of portsnap and build it as long as WITHOUT_FREEBSD_UPDATE and
WITHOUT_PORTSNAP are not both set, but for now just make the dependency
explicit.
PR: 228220
Reported by: Dries Michiels
Sponsored by: The FreeBSD Foundation
gallatin [Tue, 15 May 2018 23:55:38 +0000 (23:55 +0000)]
Unhook DEBUG_BUFRING from INVARIANTS
Some of the DEBUG_BUFRING checks are racy, and can lead to
spurious assertions when run under high load. Unhook these
from INVARIANTS until the author can fix or remove them.
imp [Tue, 15 May 2018 22:22:10 +0000 (22:22 +0000)]
Hold the reference count until the CCB is released
When a disk disappears and the periph is invalidated, any I/Os that
are pending with the controller can cause a crash when they
complete. Move to holding the softc reference count taken in dastart()
until the I/O is complete rather than only until xpt_action()
returns. (This approach was suggested by Ken Merry.) This extends
the method used in da to ada, nda, and mda.
emaste [Tue, 15 May 2018 21:51:29 +0000 (21:51 +0000)]
Add a tool to split Intel microcode into one file per Platform Id
Intel now releases microcode updates in files named after
<family>-<model>-<stepping>. In some cases a single file may include
microcode for multiple Platform Ids for the same family, model, and
stepping. Our current microcode update tooling (/usr/sbin/cpucontrol)
only processes the first microcode update in the file.
This tool splits combined files into individual files with one microcode
update each, named as
<family>-<model>-<stepping>.<platform_id_mask>.
Adding this to tools/ for experimentation and testing. In the future
we'll want to have cpucontrol or other tooling work directly with the
Intel-provided microcode files.
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D15433
imp [Tue, 15 May 2018 21:25:35 +0000 (21:25 +0000)]
Hold the reference count until the CCB is released
When a disk disappears and the periph is invalidated, any I/Os that
are pending with the controller can cause a crash when they
complete. Move to holding the softc reference count taken in dastart()
until the I/O is complete rather than only until xpt_action()
returns. (This approach was suggested by Ken Merry.)
marius [Tue, 15 May 2018 21:15:09 +0000 (21:15 +0000)]
- If present, take advantage of the R/W cache of eMMC revision 1.5 and
later devices. These caches work akin to the ones found in HDDs/SSDs
that ada(4)/da(4) also enable if existent, but likewise increase the
likelihood of data loss in case of a sudden power outage etc. On the
other hand, write performance is up to twice as high for e. g. 1 GiB
files depending on the actual chip and transfer mode employed.
For maximum data integrity, the usage of eMMC caches can be disabled
via the hw.mmcsd.cache tunable.
- Get rid of the NOP mmcsd_open().
rmacklem [Tue, 15 May 2018 20:28:50 +0000 (20:28 +0000)]
End grace for the NFSv4 server if all mounts do ReclaimComplete.
The NFSv4 protocol requires that the server only allow reclaim of state
and not issue any new open/lock state for a grace period after booting.
The NFSv4.0 protocol required this grace period to be greater than the
lease duration (over 2minutes). For NFSv4.1, the client tells the server
that it has done reclaiming state by doing a ReclaimComplete operation.
If all NFSv4 clients are NFSv4.1, the grace period can end once all the
clients have done ReclaimComplete, shortening the time period considerably.
This patch does this. If there are any NFSv4.0 mounts, the grace period
will still be over 2minutes.
This change is only an optimization and does not affect correct operation.
antoine [Tue, 15 May 2018 17:20:58 +0000 (17:20 +0000)]
vmmdev: return EFAULT when trying to read beyond VM system memory max address
Currently, when using dd(1) to take a VM memory image, the capture never ends,
reading zeroes when it's beyond VM system memory max address.
Return EFAULT when trying to read beyond VM system memory max address.
avg [Tue, 15 May 2018 16:56:30 +0000 (16:56 +0000)]
calibrate lapic timer in native_lapic_setup
The idea is to calibrate the LAPIC timer just once and only on boot,
given that [at present] the timer constants are global and shared
between all processors.
My primary motivation is to fix a panic that can happen when dynamically
switching to lapic timer. The panic is caused by a recursion on
et_hw_mtx when printing the calibration results to console. See the
review for the details of the panic.
Also, the code should become slightly simpler and easier to read. The
previous code was racy too. Multiple processors could start calibrating
the global constants concurrently, although that seems to have been
benign.
shurd [Tue, 15 May 2018 16:54:41 +0000 (16:54 +0000)]
Check that ifma_protospec != NULL in inm_lookup
If ifma_protospec is NULL when inm_lookup() is called, there
is a dereference in a NULL struct pointer. This ensures that struct is
not NULL before comparing the address.
andrew [Tue, 15 May 2018 16:44:35 +0000 (16:44 +0000)]
Increase the number of pages we allocate in the arm64 early boot. We are
already close to the limit so increasing the kernel size may cause it to
fail to boot when it runs past the end of allocated memory.
brooks [Tue, 15 May 2018 16:24:58 +0000 (16:24 +0000)]
Allow freebsd32 __sysctl(2) to return ENOMEM.
This is required by programs like sockstat that read variably sized
sysctls such as kern.file. The normal path has no such restriction and
the restriction was added without comment along with initial support for
freebsd32 in 2002 (r100384).
sbruno [Tue, 15 May 2018 13:30:59 +0000 (13:30 +0000)]
igb(4):
I210 restore functionality if pxeboot rom is enabled on this device.
r333345 attempted to determine if this code was needed or it was some kind
of work around for a problem. Turns out, its definitely a work around for
hardware locking and synchronization that manifests itself if the option
Rom is enabled and is selected as a boot device (there was a PXE attempt).
avg [Tue, 15 May 2018 13:27:29 +0000 (13:27 +0000)]
Fix 'zpool create -t <tempname>'
Creating a pool with a temporary name fails when we also specify custom
dataset properties: this is because we mistakenly call
zfs_set_prop_nvlist() on the "real" pool name which, as expected,
cannot be found because the SPA is present in the namespace with the
temporary name.
Fix this by specifying the correct pool name when setting the dataset
properties.
araujo [Tue, 15 May 2018 05:55:29 +0000 (05:55 +0000)]
vq_getchain() can return -1 if some descriptor(s) are invalid and prints
a diagnostic message. So we do a sanity checking on the return value
of vq_getchain().
np [Tue, 15 May 2018 04:24:38 +0000 (04:24 +0000)]
cxgbe(4): Filtering related features and fixes.
- Driver support for hardware NAT.
- Driver support for swapmac action.
- Validate a request to create a hashfilter against the filter mask.
- Add a hashfilter config file for T5.
marius [Mon, 14 May 2018 21:46:06 +0000 (21:46 +0000)]
The broken DDR52 support of Intel Bay Trail eMMC controllers rumored
in the commit log of r321385 has been confirmed via the public VLI54
erratum. Thus, stop advertising DDR52 for these controllers.
Note that this change should hardly make a difference in practice as
eMMC chips from the same era as these SoCs most likely support HS200
at least, probably even up to HS400ES.
shurd [Mon, 14 May 2018 20:06:49 +0000 (20:06 +0000)]
Replace rmlock with epoch in lagg
Use the new epoch based reclamation API. Now the hot paths will not
block at all, and the sx lock is used for the softc data. This fixes LORs
reported where the rwlock was obtained when the sxlock was held.
jhb [Mon, 14 May 2018 17:27:53 +0000 (17:27 +0000)]
Make the common interrupt entry point labels local labels.
Kernel debuggers depend on symbol names to find stack frames with a
trapframe rather than a normal stack frame. The labels used for the
shared interrupt entry point for the PTI and non-PTI cases did not
match the existing patterns confusing debuggers. Add the '.L' prefix
to mark these symbols as local so they are not visible in the symbol
table.
nwhitehorn [Mon, 14 May 2018 04:00:52 +0000 (04:00 +0000)]
Final fix for alignment issues with the page table first patched with
r333273 and partially reverted with r333594.
Older CPUs implement addition of offsets into the page table by a
bitwise OR rather than actual addition, which only works if the table is
aligned at a multiple of its own size (they also require it to be aligned
at a multiple of 256KB). Newer ones do not have that requirement, but it
hardly matters to enforce it anyway.
The original code was failing on newer systems with huge amounts of RAM
(> 512 GB), in which the page table was 4 GB in size. Because the
bootstrap memory allocator took its alignment parameter as an int, this
turned into a 0, removing any alignment constraint at all and making
the MMU fail. The first round of this patch (r333273) fixed this case by
aligning it at 256 KB, which broke older CPUs. Fix this instead by widening
the alignment parameter.
mmacy [Mon, 14 May 2018 00:14:00 +0000 (00:14 +0000)]
epoch(9): allow sx locks to be held across epoch_wait()
The INVARIANTS checks in epoch_wait() were intended to
prevent the block handler from returning with locks held.
What it in fact did was preventing anything except Giant
from being held across it. Check that the number of locks
held has not changed instead.
rmacklem [Sun, 13 May 2018 23:38:01 +0000 (23:38 +0000)]
Fix the eir_server_scope reply argument for NFSv4.1 ExchangeID.
In the reply to an ExchangeID operation, the NFSv4.1 server returns a
"scope" value (eir_server_scope). If this value is the same, it indicates
that two servers share state, which is never the case for FreeBSD servers.
As such, the value needs to be unique and it was without this patch.
However, I just found out that it is not supposed to change when the
server reboots and without this patch, it did change.
This patch fixes eir_server_scope so that it does not change when the
server is rebooted.
The only affect not having this patch has is that Linux clients don't
reclaim opens and locks after a server reboot, which meant they lost
any byte range locks held before the server rebooted.
It only affects NFSv4.1 mounts and the FreeBSD NFSv4.1 client was not
affected by this bug.
mmacy [Sun, 13 May 2018 23:24:48 +0000 (23:24 +0000)]
epoch(9): cleanups, additional debug checks, and add global_epoch
- GC the _nopreempt routines
- to really benefit we'd need a separate routine
- they're not currently in use
- they complicate the API for no benefit at this time
- check that we're actually in a epoch section at exit
projects / FreeBSD / FreeBSD.git / log