Add ata(4) ability to limit initial ATA mode for devices via device hints.
After boot this mode can be changed with atacontrol/camcontrol as usual.
It works for both legacy and ATA_CAM wrapper mode.
This fixes a crash in SCTP. It was possible to have a
large number of packets queued to a crashing process.
In a specific case you may get 2 ABORT's back (from
say two packets in flight). If the aborts happened to
be processed at the same time its possible to have
one free the association while the other is trying
to report all the outbound packets. When this occured
it could lead to a crash.
Import the Statistical Information For TCP Research (SIFTR) kernel module into
FreeBSD. SIFTR logs a range of statistics on active TCP connections to a log
file, providing the ability to make highly granular measurements of TCP
connection state. The tool is aimed at system administrators, developers and
researchers alike. Please take it for a spin and test it out - the man page
should have all the information required to get you going.
Many thanks go to the Cisco University Research Program Fund at Community
Foundation Silicon Valley and the FreeBSD Foundation. Their support of our work
at the Centre for Advanced Internet Architectures, Swinburne University of
Technology is greatly appreciated.
Sponsored by: Cisco URP, FreeBSD Foundation
Reviewed by: dwmalone, gnn, rpaulo
Tested by: Many on freebsd-current@ and elsewhere over the years
MFC after: 1 month
sh: Remove comment that the comma operator is missing in arithmetic
expansion.
The comma operator is not listed in POSIX.1-2008 XCU 1.1.2.1 Arithmetic
Precision and Operations (referenced by XCU 2.6.4 Arithmetic Expansion) and
is therefore not required.
Push down the acquisition of the page queues lock into
vm_pageout_page_stats(). In particular, avoid acquiring the page
queues lock unless iterating over the active queue.
Use vm_page_prev() instead of vm_page_lookup() in the implementation of
vm_fault()'s automatic delete-behind heuristic.
vm_page_prev() is typically faster.
Remove save/restore of PageMask in tlb.c functions introduced in r209243.
If we save/restore the PageMask, the value set by the bootloader will
persist, and will cause problems later in TLB exception handler.
This caused a crash in AR71xx boards.
Also fixes the EntryHi mask in pte.h
Reported by: Luiz Otavio O Souza <lists.br@gmail.com>
Tested by: Luiz Otavio O Souza <lists.br@gmail.com>
Fix a bug that WILL cause a panic. Basically
a read-lock is being called to check the vtag-timewait cache.
Then in two cases (where a vtag is bad i.e. in the time-wait
state) the write-unlock is called NOT the read-unlock. Under
conditions where lots of associations are coming and going
this will cause the system to panic at some point.
- Introduce IEEE80211_KEY_NOREPLAY, a per-key flag to ignore replay
violations.
- Use SIOCGIFMEDIA to determine VAP's opmode, cache it and set
IEEE80211_KEY_NOREPLAY for AHDEMO and IBSS.
des [Thu, 1 Jul 2010 17:44:33 +0000 (17:44 +0000)]
If the A flag is supplied, http_request() will attempt the request only
once, even if authentication is required, instead of retrying with the
proper credentials. Fix this by bumping the countdown if the origin or
proxy server requests authentication so that the initial unauthenticated
request does not count as an attempt.
Simplify the calculation of s_scale by rewriting the FP expression to
use uintmax_t instead of float and thereby eliminating the need for
a non-FP version.
jfv [Wed, 30 Jun 2010 21:05:51 +0000 (21:05 +0000)]
OK, I was a bit sleep this morning and checked in
the core changes but left out the shared code, lol.
Well, and a couple fixes to the core... hopefully
this will all be complete now.
jh [Wed, 30 Jun 2010 18:34:45 +0000 (18:34 +0000)]
- Don't assign the return value from read(2) to a variable of type
int.
- Use errx(3) instead of err(3) to print the error message on short
reads in readlabel(). errno won't be set on short reads which can
easily occur here due to the fixed size read request.
jfv [Wed, 30 Jun 2010 17:26:47 +0000 (17:26 +0000)]
SR-IOV support added to igb
What this provides is support for the 'virtual function'
interface that a FreeBSD VM may be assigned from a host
like KVM on Linux, or newer versions of Xen with such
support.
When the guest is set up with the capability, a special
limited function 82576 PCI device is present in its virtual
PCI space, so with this driver installed in the guest that
device will be detected and function nearly like the bare
metal, as it were.
The interface is only allowed a single queue in this configuration
however initial performance tests have looked very good.
alc [Wed, 30 Jun 2010 17:20:33 +0000 (17:20 +0000)]
Simplify entry to vm_pageout_clean(). Expect the page to be locked.
Previously, the caller unlocked the page, and vm_pageout_clean()
immediately reacquired the page lock. Also, assert rather than test
that the page is neither busy nor held. Since vm_pageout_clean() is
called with the object and page locked, the page can't have changed
state since the caller verified that the page is neither busy nor
held.
alc [Wed, 30 Jun 2010 04:52:42 +0000 (04:52 +0000)]
Improve bufdone_finish()'s handling of the bogus page. Specifically, if
one or more mappings to the bogus page must be replaced, call pmap_qenter()
just once. Previously, pmap_qenter() was called for each mapping to the
bogus page.
marcel [Wed, 30 Jun 2010 01:40:25 +0000 (01:40 +0000)]
On powerpc, calculate s_scale using the non-FP version previously
specific to hp300. Since FreeBSD does not support hp300, hp300 has
been removed from the condition altogether.
The FP version broke profiling on powerpc due to invalid results.
Casting to double instead of float resolved the issue, but with
Book-E not having a FP unit, the non-FP version looked preferrable.
Note that even on AIM hardware the FP version yielded an invalid
value for s_scale, so the problem is most likely with the compiler
or with the expression itself.
jfv [Wed, 30 Jun 2010 01:01:06 +0000 (01:01 +0000)]
Add a new sysctl option, this will allow one to
limit the advertised speed of an SFP+ to 1G, effectively
"forcing" link at that lower speed. It is off by default
and is enabled by sysctl dev.ix.0.force_gig=1, 0 will
set it back to the norm.
jilles [Tue, 29 Jun 2010 22:37:45 +0000 (22:37 +0000)]
sh: Forget about terminated background processes sooner.
Unless $! has been referenced for a particular job or $! still contains that
job's pid, forget about it after it has terminated. If $! has been
referenced, remember the job until the wait builtin has reported its
completion (either with the pid as parameter or without parameters).
In interactive mode, jobs are forgotten after termination has been reported,
which happens before primary prompts and through the jobs builtin. Even
then, though, remember a job if $! has been referenced.
This is similar to what is suggested by POSIX and should fix most memory
leaks (which also tend to cause sh to use more CPU time) with long running
scripts that start background jobs.
Caveats:
* Repeatedly referencing $! without ever doing 'wait', like
while :; do foo & echo started foo: $!; sleep 60; done
will still use a lot of memory and CPU time in the long run.
* The jobs and jobid builtins do not cause a job to be remembered for longer
like expanding $! does.
ken [Tue, 29 Jun 2010 22:07:53 +0000 (22:07 +0000)]
Change the mpt driver to allow larger I/O sizes.
The mpt driver previously didn't report a 'maxio' size to CAM, and so the
da(4) driver limited I/O sizes to DFLTPHYS (64K) by default. The number
of scatter gather segments allowed, as reported to busdma, was
(128K / PAGE_SIZE) + 1, or 33 on architectures with 4K pages.
Change things around so that we wait until we've determined how many
segments the adapter can support before creating the busdma tag used for
buffers, so we can potentially support more S/G segments and therefore
larger I/O sizes.
Also, fix some things that were broken about the module unload path. It
still gets hung up inside CAM, though.
mpt.c: Move some busdma initialization calls in here, and call
them just after we've gotten the IOCFacts, and know how
many S/G segments this adapter can support.
mpt.h: Get rid of MPT_MAXPHYS, it is no longer used.
Add max_cam_seg_cnt, which is used to report our maximum
I/O size up to CAM.
mpt_cam.c: Use max_cam_seg_cnt to report our maximum I/O size to CAM.
Fix the locking in mpt_cam_detach().
mpt_pci.c: Pull some busdma initialization and teardown out and put
it in mpt.c. We now delay it until we know many scatter
gather segments the adapter can support, and therefore
how to setup our busdma tags.
mpt_raid.c: Make sure we wake up the right wait channel to get the
raid thread to wake up when we're trying to shut it down.
weongyo [Tue, 29 Jun 2010 21:56:42 +0000 (21:56 +0000)]
Initializes the ratectl for a node when the state is changed to RUN.
This prevents a kernel fault by dividing with zero because the initial
rate was 0 and didn't be initialized.
Tested by: Warren Block <wblock at wonkity.com>
MFC after: 3 days
weongyo [Tue, 29 Jun 2010 21:52:40 +0000 (21:52 +0000)]
Fixes NULL pointer reference that it's occurred when the state is
changed to RUN because ic->ic_newassoc isn't set anywhere now. In the
previous bwi_newassoc() is used to initialize AMRR rate routines.
Tested by: Warren Block <wblock at wonkity.com>
MFC after: 3 days
jhb [Tue, 29 Jun 2010 20:41:52 +0000 (20:41 +0000)]
Tweak the in-kernel API for sending signals to threads:
- Rename tdsignal() to tdsendsignal() and make it private to kern_sig.c.
- Add tdsignal() and tdksignal() routines that mirror psignal() and
pksignal() except that they accept a thread as an argument instead of
a process. They send a signal to a specific thread rather than to an
individual process.
glebius [Tue, 29 Jun 2010 16:57:30 +0000 (16:57 +0000)]
After processing the O_SKIPTO opcode our cmd points to the next rule, and
"match" processing at the end of inner loop would look ahead into the next
rule, which is incorrect. Particularly, in the case when the next rule
started with F_NOT opcode it was skipped blindly.
To fix this, exit the inner loop with the continue operator forcibly and
explicitly.
kib [Tue, 29 Jun 2010 14:31:49 +0000 (14:31 +0000)]
Revert r209578:
Use C99 initializers for the struct sysent generated by MAKE_SYSENT().
C++ does not have designator-initializer facility of C99, not using this
in the header makes us friendly to C++ kernel modules, whoever wants
such schism.
imp [Tue, 29 Jun 2010 03:52:12 +0000 (03:52 +0000)]
Expand system into my_system, and add the necessary tidyness that we
need. Close the pidfile. Then close all descriptors >= 3 to avoid
information leakage to children.
This solves the problem of not being able to restart devd when you
have, for example, a dhclient forked to configure your network...
kib [Mon, 28 Jun 2010 18:12:42 +0000 (18:12 +0000)]
Despite system call deregistration drains the threads executing System V
shm syscalls, and initial check for the number of allocated segments
in the module deinitialization code, the following might happen:
after the check for active segment, while waiting for threads to
leave some other syscall, shmget(2) is called. Then, we can end
up with the shared segment that cannot be detached since sysvshm
module is unloaded.
Prevent the leak by rechecking and disclaiming a reference to the vm
object owned by sysvshm module, that might have grown during the drain.
kib [Mon, 28 Jun 2010 18:06:46 +0000 (18:06 +0000)]
Count number of threads that enter and leave dynamically registered
syscalls. On the dynamic syscall deregistration, wait until all
threads leave the syscall code. This somewhat increases the safety
of the loadable modules unloading.
gavin [Mon, 28 Jun 2010 12:04:55 +0000 (12:04 +0000)]
Various changes to make locate compilable with WARNS=6. Note that there
is still one issue on FreeBSD/arm (signed vs unsigned char) which prevents
actually bumping this to WARNS=6 - I'm still considering the correct
solution to this issue.
gavin [Mon, 28 Jun 2010 12:00:20 +0000 (12:00 +0000)]
Make WARNS=6 safe, mainly by casting to intmax_t and printing with %ju
where needed. Also, fix bad indentation on lines already affected by the
above changes.
nwhitehorn [Mon, 28 Jun 2010 01:40:56 +0000 (01:40 +0000)]
Revert r209544. It papers over a binutils bug, and is not even a reliable
fix for it.
The bug occurs when using the --as-needed flag to ld in the presence of
synthetic linker-generated symbols that reference symbols defined in
linked-to shared libraries with versioned symbols. When the only symbols
used from a library fall into this category, ld will drop the DT_NEEDED
entry for it, but retain the versioning information. This bug is best
fixed/hacked around in binutils, not in rtld.
gavin [Sun, 27 Jun 2010 23:11:35 +0000 (23:11 +0000)]
Make the second example command more closely match the demo output, and as
a side effect more clearly show the change in command lines between the
first and second example invocations.
imp [Sun, 27 Jun 2010 17:14:04 +0000 (17:14 +0000)]
Properly inherit variables from src/usr.sbin/Makefile.inc for
subdirectories of pc-sysinstall. Back out explicit setting in
pc-sysinstall/pc-sysinstall/Makefile.
gavin [Sun, 27 Jun 2010 14:21:08 +0000 (14:21 +0000)]
Fix transfer statistics in the "send file" case - The conditional used
to print the stats were using an uninitialised variable. [1]
Fix trasnfer statistics in the "receive file" case - the statistics struct
was being cleared both before and after the initial connect to the remote
server. As a result, the printed time and calculated bandwidth covers
the time to connect ad well as the time to transfer the file. This may
not be ideal, but now at least matches the "send file" case.
Found by: clang static analyser [1]
Reviewed by: imp
cperciva [Sun, 27 Jun 2010 02:30:19 +0000 (02:30 +0000)]
Note that internal_underscores should be used in identifier names rather
than camelCase or TitleCase.
According to grep and my checked-out source tree, we're currently at 3733379 internal_underscores, 93024 camelCases, and 80831 TitleCases;
so this commit is merely documenting existing practice.
nwhitehorn [Sat, 26 Jun 2010 22:04:52 +0000 (22:04 +0000)]
Ignore versioned dependencies on shared objects to which we do not link.
This fixes an error with files like this created by GNU ld under certain
circumstances.
pjd [Sat, 26 Jun 2010 21:44:05 +0000 (21:44 +0000)]
Just like in case of setgroups(2), for getgroups(2) also advice including
sys/param.h instead of sys/types.h so we get NGROUPS_MAX and NGROUPS
definitions.
tuexen [Sat, 26 Jun 2010 19:26:20 +0000 (19:26 +0000)]
* Do not dereference a NULL pointer when calling an SCTP send syscall
not providing a destination address and using ktrace.
* Do not copy out kernel memory when providing sinfo for sctp_recvmsg().
Both bug where reported by Valentin Nechayev.
The first bug results in a kernel panic.
MFC after: 3 days.
rpaulo [Fri, 25 Jun 2010 15:32:46 +0000 (15:32 +0000)]
Import the acpi_aibs(4) driver written by Constantine A. Murenin.
It has more features than acpi_aiboost(4) and it will eventually replace
acpi_aiboost(4).
Submitted by: Constantine A. Murenin <cnst at FreeBSD.org>
Reviewed by: freebsd-acpi, imp
MFC after: 1 month
imp [Thu, 24 Jun 2010 22:21:47 +0000 (22:21 +0000)]
Bring in Kris Moore's pc-sysinstall shell script from PC-BSD. This
shell script is the back end logic necessary for an installer. It
contains both query routines to allow a front-end installer to present
reasonable choices to the user and also action routines which allow
the front end installer to put a FreeBSD distribution onto a disk. It
supports installing onto the usual suspects, as well as advanced
features like Mirroring, ZFS, Encryprion and GPT labels.
While this is only the back-end of the installer, it can do unattended
scripted installations. In PC-BSD's world view, all installations are
scripted and all the front-end does is write the script. As such, it
is useful in its own right.
This has been extensively tested over the past several releases of
PC-BSD. However, differences between that environment and FreeBSD
suggest there will be a period of shake-out while those differences
are discovered and corrected.
A text-based front-end is in the works. For the GUI-based front-end,
you can use the PC-BSD distribution.
Kris' BSDcan paper on pc-sysinstall is linked off his talk on the
BSDcan site:
http://www.bsdcan.org/2010/schedule/events/173.en.html
The man page is written by Josh Paetzel, and I wrote the Makefiles for
the FreeBSD integration. Kris wrote the rest.
This represents version r7010 in the PC-BSD repo.
http://svn.pcbsd.org/pcbsd/current/pc-sysinstall
imp [Thu, 24 Jun 2010 16:28:52 +0000 (16:28 +0000)]
Merge from TBEMD:
Rather than having arch specific code in Makefile.inc1, generalize so
that we can control the settings of different options on a per
architecutre basis.
jchandra [Thu, 24 Jun 2010 08:08:43 +0000 (08:08 +0000)]
Merge jmallett@'s n64 work into HEAD - changeset 7
Initial support for n32 and n64 ABIs from
http://svn.freebsd.org/base/user/jmallett/octeon
Changes are:
- syscall, exception and trap support for n32/n64 ABIs
- 64-bit address space defines
- _jmp_buf for n32/n64
- casts between registers and ptr/int updated to work on n32/n64