Avoid a race betweem freeing LDT and context switches.
cpu_switch.S uses curproc->p_md.md_ldt value as the flag indicating
presence of the process LDT. The flag is checked and then ldt segment
descriptor is copied into the CPU' GDT slot.
Disallow context switches around clearing of the curproc LDT state by
performing the cleanup in critical section. Ensure that the md_ldt
flag is cleared before md_ldt_sd descriptor content is destroyed by
inserting fence between the operations.
We depend on the x86 memory model strong ordering guarantees, in
particular, that cpu_switch.S observes the writes to md_ldt and
md_ldt_sd in the expected order.
Discussed with: bde
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Andriy Gapon [Thu, 5 Oct 2017 12:38:26 +0000 (12:38 +0000)]
fix the misleading log facility used in devd/zfs.conf
In general, the "kern" facility is reserved for the kernel use only.
If a program specifies that facility, then it is silently converted
to "user" facility.
So, using logger -p kern.xxx was both misleading and non-specific.
Thus, change the facility to local7, so that users can create
more adequate syslogd configurations.
While local0..local7 are documented as being for local use we already
have several examples in the tree where they are used because none of
the named facilities really fits.
Andriy Gapon [Thu, 5 Oct 2017 12:32:14 +0000 (12:32 +0000)]
sysctl-s in a module should be accessible only when the module is initialized
A sysctl can have a custom handler that may access data that is initialized
via SYSINIT(9) or via a module event handler (also invoked via SYSINIT).
Thus, it is not safe to allow access to the module's sysctl-s until
the initialization is performed. Likewise, we should not allow access
to teh sysctl-s after the module is uninitialized.
The latter is easy to achieve by properly ordering linker_file_unregister_sysctls
and linker_file_sysuninit.
The former is not as easy for two reasons:
- the initialization may depend on tunables which get set when sysctl-s are
registered, so we need to set the tunables before running sysinit-s
- the initialization may try to dynamically add more sysctl-s under statically
defined sysctl nodes
So, this change splits the sysctl setup into two phases. In the first phase
the sysctl-s are registered as before but they are disabled and hidden from
consumers. In the second phase, done after sysinit-s, normal access to the
sysctl-s is enabled.
The change should affect only dynamic module loading and unloading after
the system boot-up. Nothing changes for sysctl-s compiled into the kernel
and sysctl-s in preloaded modules.
Provide consistent snapshot of the requested descriptors by preventing
other threads from modifying LDT while we fetch the data, lock dt_lock
around the read. Copy the data into intermediate buffer, which is
copied out after the lock is dropped.
Use guaranteed atomic (aligned volatile) reads of the descriptors to
use same-size atomic as CPU update to set A bit in the descriptor type
field.
Improve overflow checking for the descriptors range calculations and
remove unneeded casts.
Reviewed by: bde
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Andriy Gapon [Thu, 5 Oct 2017 12:25:18 +0000 (12:25 +0000)]
remove heuristic error detection from ddi_strto*()
Zero, <TYPE>_MIN and <TYPE>_MAX values can result from valid conversions.
They don't necessarily imply any error.
Since we do not have any reliable error signaling from libkern's strto*(),
it's better to always assume success rather than to report an error when
there is none.
Compilers are allowed to combine plain reads into group operations,
e.g. 64bit element copies of one array into another can be
legitimately optimized back to a memcpy() call, which r323772 tried to
prevent.
Qualify accesses to LDT descriptors with volatile dereference to
ensure that each write indeed occurs. After that, our usual claim of
native-size aligned writes being atomic applies.
This is equivalent to atomic_store(memory_order_relaxed) C11 accesses,
but our machine/atomic.h does not provide corresponding primitive.
Noted and reviewed by: bde
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
On amd64, mark the set_user_ldt() function as static.
On i386, the function is used from the context switch code and needs
to be accessible externally. Amd64 MD context switch does not lock an
LDT spinlock and inlines switching in assembly.
Discussed with: bde
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
This makes the LDT to use only one page with default settings,
avoiding the need to find contigous 2 pages in KVA. It seems that
most users are fine even with 512 segments.
Discussed with: bde
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Navdeep Parhar [Thu, 5 Oct 2017 07:18:16 +0000 (07:18 +0000)]
cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues
separately from NIC rx queues instead of using the same parameters for
both types of queues.
Add sanity checks in ql_hw_send() qla_send() to ensure that empty slots
in Tx Ring map to empty slot in Tx_buf array before Transmits. If the
checks fail further Transmission on that Tx Ring is prevented.
Rick Macklem [Wed, 4 Oct 2017 22:55:30 +0000 (22:55 +0000)]
Add a few definitions for the Flex File Layout.
This patch adds a few definitions for the Flex File Layout.
Until a future commit adds Flex File layout support, these new fields
are not used.
This patch should not affect the "pnfs" option for File Layout.
Warner Losh [Wed, 4 Oct 2017 14:41:45 +0000 (14:41 +0000)]
'private' isn't a PNP string field, so instead used the reserved '#'
name for this field (it might even be possible to just drop it
entirely, since it will be ignored either way).
Make sure the timer belonging to the delayed work in the LinuxKPI
gets drained before invoking the work function. Else the timer
mutex may still be in use which can lead to use-after-free situations,
because the work function might free the work structure before returning.
Cy Schubert [Wed, 4 Oct 2017 03:39:54 +0000 (03:39 +0000)]
When building multiple kernels using KERNCONF, non-existent KERNCONF
files will produce an error and buildkernel will fail. Previously missing
KERNCONF files silently failed giving no indication as to why, only to
subsequently discover during installkernel that the desired kernel was
never built in the first place.
Cy Schubert [Wed, 4 Oct 2017 03:24:16 +0000 (03:24 +0000)]
When building multiple kernels using KERNCONF, non-existent KERNCONF
files will produce an error and buildkernel will fail. Previously missing
KERNCONF files silently failed giving no indication as to why, only to
subsequently discover during installkernel that the desired kernel was
never built in the first place.
Brooks Davis [Tue, 3 Oct 2017 22:57:19 +0000 (22:57 +0000)]
Remove an unneeded and incorrect memset().
On Variant I TLS architectures (aarch64, arm, mips, powerpc, and riscv)
the __libc_allocate_tls function allocates thread local storage memory
with calloc(). It then copies initialization data over the portions with
non-zero initial values. Before this change it would then pointlessly
zero the already zeroed remainder of the storage. Unfortunately the
calculation was wrong and it would zero TLS_TCB_SIZE (2*sizeof(void *))
additional bytes.
In practice, this overflow only matters if the TLS segment is sized such
that calloc() allocates a less than TLS_TCB_SIZE extra memory. Even
then, the likely result will be zeroing part of the next bucket. This
coupled with the impact being confined to Tier II platforms means there
will be no security advisory for this issue.
Make procstat(1) recognize process descriptors, so that it shows
"P" instead of "?" in "procstat -af" output. Note that there are
still a few more DTYPE_* kinds we don't decode yet.
Conrad Meyer [Tue, 3 Oct 2017 00:53:11 +0000 (00:53 +0000)]
Correct sense of crypt(3) NULL checks in init(8) and lock(1)
In r231994, an attempt was made to fix crypt(3) failure returns (NULL).
However, instead of treating crypt(3) failure as authentication failure,
some of the changes treated crypt(3) failure as authentication success.
This is wrong.
r324225 fixed this for ppp, which also inspired this review. The other
changes in the 231994 revision were audited for correctness and look ok.
Gleb Smirnoff [Mon, 2 Oct 2017 23:29:56 +0000 (23:29 +0000)]
Hide struct socket and struct unpcb from the userland.
Violators may define _WANT_SOCKET and _WANT_UNPCB respectively and
are not guaranteed for stability of the structures. The violators
list is the the usual one: libprocstat(3) and netstat(1) internally
and lsof in ports.
In struct xunpcb remove the inclusion of kernel structure and add
a bunch of spare fields. The xsocket already has socket not included,
but add there spares as well. Embed xsockbuf into xsocket.
Sort declarations in sys/socketvar.h to separate kernel only from
userland available ones.
Conrad Meyer [Mon, 2 Oct 2017 23:14:29 +0000 (23:14 +0000)]
ppp(8): Fix various bugs in NOPAM section of auth_CheckPasswd
* pw is not initialized before use
* success is returned if crypt(3) errors
These bugs were introduced in r231994, which attempted to adopt DragonflyBSD f4a9869feb646aafe72de6e5d61051a023a02676. The original author of the
Dragonfly change also noticed these mistakes and filed the PR.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Toomas Soome <tsoome@me.com>
Reviewed by: Igor Kozhukhov <igor@dilos.org>
Reviewed by: Andrew Stormont <andyjstormont@gmail.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Yuri Pankov <yuri.pankov@nexenta.com>
https://www.illumos.org/issues/3871
GCC 4.5.3 on Gentoo Linux did not like a few of the changes made in the issue
3604 patch. It printed an error and a couple of warnings:
../../cmd/zdb/zdb.c: In function 'dump_bpobj':
../../cmd/zdb/zdb.c:1257:3: error: 'for' loop initial declarations are only
allowed in C99 mode
../../cmd/zdb/zdb.c:1257:3: note: use option -std=c99 or -std=gnu99 to compile
your code
../../cmd/zdb/zdb.c: In function 'dump_deadlist':
../../cmd/zdb/zdb.c:1323:8: warning: too many arguments for format
../../cmd/zdb/zdb.c:1323:8: warning: too many arguments for format
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Serapheim Dimitropoulos <serapheim@delphix.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Richard Yao <ryao@gentoo.org>
https://www.illumos.org/issues/6866
Need this for #6865.
To be generally more scripting-friendly, overload this issue with adding '-q'
option which should skip printing any label information.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Yuri Pankov <yuri.pankov@nexenta.com>
https://www.illumos.org/issues/7280
zdb is very handy for diagnosing problems with a pool in a safe and
quick way. When a pool is in a bad shape, we often want to disable some
fail-safes, or adjust some tunables in order to open them. In the
kernel, this is done by changing public variables in mdb. The goal of
this feature is to add the same capability to zdb and ztest, so that
they can change libzpool tuneables from the command line.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Pavel Zakharov <pavel.zakharov@delphix.com>
Michael Zhilin [Mon, 2 Oct 2017 20:33:16 +0000 (20:33 +0000)]
[libthr] revert change of visibility of _thread_keytable to unbreak debugger
Fix regression by r318539. The sysutils/pstack uses library libthread_db to
read information about threads state. The function pt_ta_new makes lookup of
several key symbols including _thread_keytable. But r318539 mades this field
static. It causes silent ignore of libthr library by pstack and as result
sysutils/pstack doesn't output any thread information.
Emmanuel Vadot [Mon, 2 Oct 2017 19:17:09 +0000 (19:17 +0000)]
Allwinner H3 CCU: Fix build on ARM64
ccu_h3.c is also used on ARM64 as it provides clocks for the H5 SoC.
Since ARM64 doesn't have sys/gun/dts/include in it's include path, use
the full name for the sun8i-h3-ccu.h include.
Michael Tuexen [Mon, 2 Oct 2017 18:25:30 +0000 (18:25 +0000)]
Fix a bug which avoided that rules for matching port numbers for SCTP
packets where actually matched.
While there, make clean in the man-page that SCTP port numbers are
supported in rules.
Eugene Grosbein [Mon, 2 Oct 2017 16:33:04 +0000 (16:33 +0000)]
rsh: introduce new option -N disabling shutdown of socket sending path.
This prevents premature disconnection of rsh session with protocol
implementation confused by "end-of-file" condition for standard
input stream. For example, modern Cisco IOS (15.x) versions
can be managed with "rsh -N" cron jobs having /dev/null as stdin.
Emmanuel Vadot [Mon, 2 Oct 2017 16:21:20 +0000 (16:21 +0000)]
Allwinner A31 ccu: Use clock/reset IDs from dt-bindings
Do not redefines resets and clocks ID which are already in the
dt-bindings include directory. Those files are under dual licenced
under GPL2/MIT so use them directly.
Emmanuel Vadot [Mon, 2 Oct 2017 16:12:06 +0000 (16:12 +0000)]
Allwinner A64 ccu: Use clock/reset IDs from dt-bindings
Do not redefines resets and clocks ID which are already in the
dt-bindings include directory. Those files are under dual licenced
under GPL2/MIT so use them directly.
Emmanuel Vadot [Mon, 2 Oct 2017 15:48:39 +0000 (15:48 +0000)]
Allwinner H3 ccu: Use clock/reset IDs from dt-bindings
Do not redefines resets and clocks ID which are already in the
dt-bindings include directory. Those files are under dual licence
GPL2/MIT so use them directly.
Allan Jude [Mon, 2 Oct 2017 14:19:31 +0000 (14:19 +0000)]
bsdinstall(8) hardening menu: Utilize new kern.randompid=1 behaviour
Enabling the PID randomization option in bsdinstall(8)'s hardening menu
now randomizes the effective value of kern.randompid on each boot.
Previous behaviour:
When kern.randompid was enabled via the the bsdinstall(8) hardening menu,
a random value was generated and placed in the systems /etc/sysctl.conf as
kern.randompid=value
This makes the value of kern.randompid static across reboots.
New behaviour:
When kern.randompid is enabled via the bsdinstall(8) hardening menu, the
line kern.randompid=1 is placed in the systems /etc/sysctl.conf.
This takes advantage of a new kernel feature and makes the value of
kern.randompid be randomized by the kernel on each reboot.
Submitted by: Marie Helene Kvello-Aune <marieheleneka@gmail.com>
Reviewed by: des
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D12433
https://www.illumos.org/issues/8600
ZFS channel programs should be able to create snapshots.
In addition to the base snapshot functionality, this will likely entail adding
extra logic to handle edge cases which were formerly not possible, such as
creating then destroying a snapshot in the same transaction sync.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: Brad Lewis <brad.lewis@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Chris Williamson <chris.williamson@delphix.com>
https://www.illumos.org/issues/8592
ZFS channel programs should be able to perform a rollback. This logic will
probably look pretty similar to zfs.sync.destroy().
Reviewed by: Chris Williamson <chris.williamson@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Brad Lewis <brad.lewis@delphix.com>
https://www.illumos.org/issues/8604
Every time we want to unmount a snapshot (happens during snapshot deletion or
renaming) we unnecessarily iterate through all the mountpoints in the VFS layer
(see zfs_get_vfs).
Ideally we would just put a hold on the snapshot and access its respective VFS
resource directly.
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Andy Stormont <astormont@racktopsystems.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Serapheim Dimitropoulos <serapheim@delphix.com>
FreeBSD note: I added a FreeBSD specific function getzfsvfs_ref() which
is like getzfsvfs() but returns a filesystem referenced, not busied.
We want a busied filesystem in most cases, because we access its private
data and, thus, we need to prevent the filesystem from being unmounted
and its private data destroyed. But in some cases we can either get
away with just a referenced filesystem or we must not busy the
filesystem. Unmounting the filesystem is one of such cases.
Alan Cox [Mon, 2 Oct 2017 07:14:32 +0000 (07:14 +0000)]
When mdstart_swap() accesses a page that is already in the active queue,
mark the page as referenced rather than calling vm_page_activate(). This
allows the page's act_count to grow beyond ACT_INIT and better reflect
its usage. (See also r324146, which modified a function used by tmpfs,
uiomove_object_page(), to behave in the same way.)
Ian Lepore [Mon, 2 Oct 2017 02:58:28 +0000 (02:58 +0000)]
Define a single instance of ahci_devclass and reference it from all the
attachment code for various SOCs and busses. Remove all the static and
should-have-been-static and named-differently instances of it.
This should eliminate the recently-grown build warnings about multiple
definitions when building arm kernels.
Ian Lepore [Mon, 2 Oct 2017 01:03:18 +0000 (01:03 +0000)]
Enhance the interrupt capabilities of ti_pruss driver.
The existing ti_pruss driver for the PRUSS Hardware provided by the AM335x
ARM CPU has basic interrupt capabilities. This updated driver provides some
more options:
- Sysctl based configuration for the interrupts (for some examples, see the
test plan in the phabricator review cited below).
- A device file (/dev/pruss0.irqN) for each enabled interrupt. This file
can be read and the device blocks if no irq has happened or returns an
uint64_t timestamp based on nanouptime().
- Each interrupt device file provides kqueue-based event notification,
blocking read(), or select().
Submitted by: Manuel Stuhn <freebsdnewbie@freenet.de>
Differential Revision: https://reviews.freebsd.org/D11959
Ian Lepore [Mon, 2 Oct 2017 00:49:33 +0000 (00:49 +0000)]
Allow Raspberry Pi platform and drivers to be configured with upstream DTBs.
- Added more compatibility strings to drivers not yet converted
- Added new RPI platform code compatibility string to match the ones used
upstream
- Adapted RPI and RPI2 DTS to match the new platform code compatibility
string
The goal is to use the upstream DTBs as a replacement for our custom one.
This is now possible with these changes.
Additionally, as the RPI firmware automatically chooses the right DTB for
us, this would allow to have one common armv6 kernel for RPI0 and RPI1
(BCM2835-based), and one common armv7 kernel for RPI2 v1.1 (BCM2836-based),
and RPI2 v1.2 / RPI3 (BCM2837-based).
Patrick Kelsey [Sun, 1 Oct 2017 23:37:17 +0000 (23:37 +0000)]
The soisconnected() call removed from syncache_socket() in r307966 was
not extraneous in the TCP Fast Open (TFO) passive-open case. In the
TFO passive-open case, syncache_socket() is being called during
processing of a TFO SYN bearing a valid cookie, and a call to
soisconnected() is required in order to allow the application to
immediately consume any data delivered in the SYN and to have a chance
to generate response data to accompany the SYN-ACK. The removal of
this call to soisconnected() effectively converted all TFO passive
opens to having the same RTT cost as a standard 3WHS.
This commit adds a call to soisconnected() to syncache_tfo_expand() so
that it is only in the TFO passive-open path, thereby restoring TFO
passve-open RTT performance and preserving the non-TFO connection-rate
performance gains realized by r307966.
Julien Charbon [Sun, 1 Oct 2017 21:20:28 +0000 (21:20 +0000)]
Fix an infinite loop in tcp_tw_2msl_scan() when an INP_TIMEWAIT inp has
been destroyed before its tcptw with INVARIANTS undefined.
This is a symmetric change of r307551:
A INP_TIMEWAIT inp should not be destroyed before its tcptw, and INVARIANTS
will catch this case. If INVARIANTS is undefined it will emit a log(LOG_ERR)
and avoid a hard to debug infinite loop in tcp_tw_2msl_scan().
Andrew Turner [Sun, 1 Oct 2017 19:52:47 +0000 (19:52 +0000)]
To prepare for adding EFI runtime services support on arm64 move the
machine independent parts of the existing code to a new file that can be
shared between amd64 and arm64.
https://www.illumos.org/issues/8605
zfs.exists() in channel programs doesn't return any result, and should have a
man page entry.
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Chris Williamson <chris.williamson@delphix.com>
Ian Lepore [Sun, 1 Oct 2017 16:48:36 +0000 (16:48 +0000)]
Work around bcm283x silicon bugs to make i2c repeat-start work for the most
common case where it's needed -- a write followed by a read to the same slave.
The i2c controller in this chip only performs complete transfers, it does
not provide control over start/repeat-start/stop operations on the bus.
Thus, we have gotten a full stop/start sequence rather than a repeat-start
when doing a typical i2c slave access of "write address, read data". Some
i2c slave devices require a repeat-start to work correctly.
These changes cause the controller to do a repeat-start by pre-staging the
read parameters in the controller registers immediate after the controller
has latched the values for the initial write operation, but before any
bytes are actually written. With the values pre-staged, when the write
portion of the transfer completes, the state machine in the silicon sees
a new start operation already staged and that causes it to perform a
repeat-start. The key to tricking the buggy hardware into doing this is
to avoid prefilling any output data in the transmit FIFO so that it is
possible to catch the silicon in the state where transmit values are
latched but the transmit isn't completed yet.
Reviewed by: Steve Gonczi <steve.gonczi@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Yuri Pankov <yuripv@gmx.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Approved by: Dan McDonald <danmcd@joyent.com>
Author: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Steve Gonczi <steve.gonczi@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Yuri Pankov <yuripv@gmx.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Approved by: Dan McDonald <danmcd@joyent.com>
Author: Pavel Zakharov <pavel.zakharov@delphix.com>
https://www.illumos.org/issues/7431
ZFS channel programs (ZCP) adds support for performing compound ZFS
administrative actions via Lua scripts in a sandboxed environment (with time
and memory limits).
This initial commit includes both base support for running ZCP scripts, and a
small initial library of API calls which support getting properties and
listing, destroying, and promoting datasets.
Testing: in addition to the included unit tests, channel programs have been in
use at Delphix for several months for batch destroying filesystems. The
dsl_destroy_snaps_nvl() call has also been replaced with
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Approved by: Garrett D'Amore <garrett@damore.org>
Author: Chris Williamson <chris.williamson@delphix.com>
https://www.illumos.org/issues/8552
In the LUA interpreter used by "zfs program", the lua format() function
accidentally includes support for '%f' and friends, which can cause compilation
problems when building on platforms that don't support floating-point math in
the kernel (e.g. sparc). Support for '%f' friends (%f %e %E %g %G) should be
removed, since there's no way to supply a floating-point value anyway (all
numbers in ZFS LUA are int64_t's).
Reviewed by: Yuri Pankov <yuripv@gmx.com>
Reviewed by: Igor Kozhukhov <igor@dilos.org>
Approved by: Dan McDonald <danmcd@joyent.com>
Author: Matthew Ahrens <mahrens@delphix.com>
https://www.illumos.org/issues/8590
In dsl_destroy_snapshots_nvl(), "snaps_normalized" is not freed after it is
added to "arg".
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Steve Gonczi <steve.gonczi@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Dan McDonald <danmcd@joyent.com>
Author: Matthew Ahrens <mahrens@delphix.com>
FreeBSD notes:
- zfs-program.8 manual page is taken almost as is from the vendor repository,
no FreeBSD-ification done
- fixed multiple instances of NULL being used where an integer is expected
- replaced ETIME and ECHRNG with ETIMEDOUT and EDOM respectively
This commit adds a modified version of Lua 5.2.4 under
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/lua, mirroring the
upstream. See README.zfs in that directory for the description of Lua
customizations.
See zfs-program.8 on how to use the new feature.