Rick Macklem [Sun, 8 May 2016 20:10:22 +0000 (20:10 +0000)]
Make "-S" a default option for mountd.
After a discussion on freebsd-fs@ there seemed to be a consensus that
the "-S" option for mountd should become the default.
Since the only known issue w.r.t. using "-S" was fixed by r299201,
this commit adds "-S" to the default mountd_flags.
Adrian Chadd [Sun, 8 May 2016 19:14:05 +0000 (19:14 +0000)]
[bhnd] Initial bhnd(4) SPROM/NVRAM support.
This adds support for the NVRAM handling and the basic SPROM
hardware used on siba(4) and bcma(4) devices, including:
* SPROM directly attached to the PCI core, accessible via PCI configuration
space.
* SPROM attached to later ChipCommon cores.
* SPROM variables vended from the parent SoC bus (e.g. via a directly-attached
flash device).
Additional improvements to the NVRAM/SPROM interface will
be required, but this changeset stands alone as working
checkpoint.
Svatopluk Kraus [Sun, 8 May 2016 08:57:50 +0000 (08:57 +0000)]
INTRNG - update gpio pin capabilities according to r299166.
Note that the updated comment is valid only for INTRNG. This should not
be a problem as not INTRNG code is left in place for debugging reasons
only and should not be used anymore. It's anticipated that this old
code will be removed soon.
Rick Macklem [Sat, 7 May 2016 22:45:08 +0000 (22:45 +0000)]
Don't increment srvrpccnt[] for the NFSv4.1 operations.
When support for NFSv4.1 was added to the NFS server, it broke
the server rpc count stats, since newnfsstats.srvrpccnt[] doesn't
have entries for the new NFSv4.1 operations.
Without this patch, the code was incrementing bogus entries in
newnfsstats for the new NFSv4.1 operations.
This patch is an interim fix. The nfsstats structure needs to be
updated and that will come in a future commit.
Mark Johnston [Sat, 7 May 2016 03:41:29 +0000 (03:41 +0000)]
Clean up callers of nd6_prelist_add().
nd6_prelist_add() sets *newp if and only if it is successful, so there's no
need for code that handles the case where the return value is 0 and
*newp == NULL. Fix some style bugs in nd6_prelist_add() while here.
Rewrite the main loop of the "sed s/..." command, shortening it by ten
lines and simplifying it by removing the switch statement implementing
/g, /1, and /2 separately and repetitively.
This will be needed to bring a fix from OpenBSD later.
John Baldwin [Sat, 7 May 2016 00:33:35 +0000 (00:33 +0000)]
Use DDP to implement zerocopy TCP receive with aio_read().
Chelsio's TCP offload engine supports direct DMA of received TCP payload
into wired user buffers. This feature is known as Direct-Data Placement.
However, to scale well the adapter needs to prepare buffers for DDP
before data arrives. aio_read() is more amenable to this requirement than
read() as applications often call read() only after data is available in
the socket buffer.
When DDP is enabled, TOE sockets use the recently added pru_aio_queue
protocol hook to claim aio_read(2) requests instead of letting them use
the default AIO socket logic. The DDP feature supports scheduling DMA
to two buffers at a time so that the second buffer is ready for use
after the first buffer is filled. The aio/DDP code optimizes the case
of an application ping-ponging between two buffers (similar to the
zero-copy bpf(4) code) by keeping the two most recently used AIO buffers
wired. If a buffer is reused, the aio/DDP code is able to reuse the
vm_page_t array as well as page pod mappings (a kind of MMU mapping the
Chelsio NIC uses to describe user buffers). The generation of the
vmspace of the calling process is used in conjunction with the user
buffer's address and length to determine if a user buffer matches a
previously used buffer. If an application queues a buffer for AIO that
does not match a previously used buffer then the least recently used
buffer is unwired before the new buffer is wired. This ensures that no
more than two user buffers per socket are ever wired.
Note that this feature is best suited to applications sending a steady
stream of data vs short bursts of traffic.
John Baldwin [Fri, 6 May 2016 23:46:35 +0000 (23:46 +0000)]
Restore name=value format of PCI location strings.
When devctl was added, the location string for PCI devices was changed to
use the PCI "selector" that pciconf and devctl accept. However, devd
assumes that location strings are formatted as a list of name=value pairs.
As a result, devd is no longer parsing any of the values out of PCI
device events. Restore the previous format of the PCI location strings
to restore the location and slot keywords in case any devd scripts are
using this. Add the "selector" as a new 'dbsf' location variable.
Reviewed by: imp
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D6253
Rick Macklem [Fri, 6 May 2016 23:26:17 +0000 (23:26 +0000)]
Give mountd -S priority over outstanding RPC requests when suspending the nfsd.
It was reported via email that under certain heavy RPC loads
long delays before the exports would be updated was observed
when using "mountd -S". This patch reverses the priority between
the exclusive lock request to suspend the nfsd threads and the
shared lock request for performing RPCs.
As such, when mountd attempts to suspend the nfsd threads, it
gets priority over outstanding RPC requests to do this.
I suspect that the case reported was an artificial test load,
but this patch did fix the problem for the reporter.
Reported and Tested by: josephlai@qnap.com
MFC after: 2 weeks
Ed Maste [Fri, 6 May 2016 21:19:28 +0000 (21:19 +0000)]
Add nid_namelen bounds check to nfssvc system call
This is only allowed by root and only used by the nfs daemon, which
should not provide an incorrect value. However, it's still good
practice to validate data provided by userland.
Svatopluk Kraus [Fri, 6 May 2016 20:55:14 +0000 (20:55 +0000)]
INTRNG - use gpio interrupt modes definitions added in r298738 and
implement also GPIO_INTR_EDGE_BOTH mode. All reasonable interrupt
modes are supported now.
Sean Bruno [Fri, 6 May 2016 17:00:45 +0000 (17:00 +0000)]
Since igb_detach() cleans up all the data structures that will be
free'd by the functions following its call, we can simply return instead
of crashing and burning in the event of igb_detach() failing.
Roger Pau Monné [Fri, 6 May 2016 16:44:46 +0000 (16:44 +0000)]
xen/privcmd: fix integer truncation in IOCTL_PRIVCMD_MMAPBATCH
The size field in the XENMEM_add_to_physmap_range is an uint16_t, and the
privcmd driver was doing an implicit truncation of an int into an uint16_t
when filling the hypercall parameters.
Fix this by adding a loop and making sure privcmd splits ioctl request into
2^16 chunks when issuing the hypercalls.
Reported and tested by: Marcin Cieslak <saper@saper.info>
Sponsored by: Citrix Systems R&D
Although usually small, values produced by nitems() are unsigned.
Unsign inxdeing variables related to nitems() macros to avoid
signed vs. unsigned comparisons.
Although usually small, values produced by nitems() are unsigned.
By unsigning the corresponding indexes we avoid signed vs unsigned
comparisons. This may have some effect on performance, although given the
small sizes the effect will not be perceivable and it makes the code
clearer.
Although usually small, values produced by nitems() are unsigned.
By unsigning the corresponding indexes we avoid signed vs unsigned
comparisons. This may have some effect on performance, although given the
small sizes the effect will not be perceivable, and it makes the code
clearer.
Respect the style of the changed files: one uses u_int while the other
uses "unsigned int".
Svatopluk Kraus [Fri, 6 May 2016 08:56:46 +0000 (08:56 +0000)]
INTRNG - use gpio interrupt modes definitions added in r298738 and
implement also GPIO_INTR_EDGE_BOTH mode. All reasonable interrupt
modes are supported now.
Svatopluk Kraus [Fri, 6 May 2016 08:54:00 +0000 (08:54 +0000)]
Set correct size to the size member of struct intr_map_data when
initialized. As the size member is not used at the present,
it did not break anything.
Interesting fixes: 3adaa2e Fix _Unwind_Exception cleanup functions 286776c Check exception cleanup function ptr before calling edda626 Correct exception specifications on new and delete operators
John Baldwin [Thu, 5 May 2016 22:26:23 +0000 (22:26 +0000)]
Native PCI-express HotPlug support.
PCI-express HotPlug support is implemented via bits in the slot
registers of the PCI-express capability of the downstream port along
with an interrupt that triggers when bits in the slot status register
change.
This is implemented for FreeBSD by adding HotPlug support to the
PCI-PCI bridge driver which attaches to the virtual PCI-PCI bridges
representing downstream ports on HotPlug slots. The PCI-PCI bridge
driver registers an interrupt handler to receive HotPlug events. It
also uses the slot registers to determine the current HotPlug state
and drive an internal HotPlug state machine. For simplicty of
implementation, the PCI-PCI bridge device detaches and deletes the
child PCI device when a card is removed from a slot and creates and
attaches a PCI child device when a card is inserted into the slot.
The PCI-PCI bridge driver provides a bus_child_present which claims
that child devices are present on HotPlug-capable slots only when a
card is inserted. Rather than requiring a timeout in the RC for
config accesses to not-present children, the pcib_read/write_config
methods fail all requests when a card is not present (or not yet
ready).
These changes include support for various optional HotPlug
capabilities such as a power controller, mechanical latch,
electro-mechanical interlock, indicators, and an attention button.
It also includes support for devices which require waiting for
command completion events before initiating a subsequent HotPlug
command. However, it has only been tested on ExpressCard systems
which support surprise removal and have none of these optional
capabilities.
PCI-express HotPlug support is conditional on the PCI_HP option
which is enabled by default on arm64, x86, and powerpc.
Ed Maste [Thu, 5 May 2016 21:20:09 +0000 (21:20 +0000)]
Limit Options.inc generation to desired targets
As mentioned in the Makefile there's an "atrocious" hack to generate a
different version of Options.inc.h, depending on the library being
built.
Remove the catch-all else case and limit it to specific libraries, so
that we don't accidentally use the Options.inc.h from clangdriver if a
future libary also uses Options.inc.h.
Reviewed by: dim
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D6209
Rename find_name_tlv_type() to ipfw_find_name_tlv_type() and make it
global. Use it in ip_fw_table.c instead of find_name_tlv() to reduce
duplicated code.
John Baldwin [Thu, 5 May 2016 15:43:26 +0000 (15:43 +0000)]
Fix <sys/_bitset.h> and <sys/_cpuset.h> to not require <sys/param.h>.
- Hardcode '8' instead of NBBY in _BITSET_BITS.
- Define a private version of 'howmany' for use in __bitset_words().
- While here, move a few more things out of _bitset.h and _cpuset.h to
bitset.h and cpuset.h, respectively. The only things left in
_bitset.h and _cpuset.h are the bits needed to define a bitset
structure.