Alexey Dokuchaev [Wed, 31 May 2017 03:44:31 +0000 (03:44 +0000)]
- Add a simple example to uname(1) manual page to show how the hardware
platform (returned by -m) can be different from the machine's processor
architecture (-p)
- Document that make(1) sets universal MACHINE and MACHINE_ARCH variables
based on these values
Ed Maste [Tue, 30 May 2017 15:51:48 +0000 (15:51 +0000)]
add a rescue/sh sanity check before installworld on the running system
FreeBSD does not guarantee kernel forward compatibility (that is,
running a newer userland on an older kernel). The documented upgrade
procedure specifies that installkernel should be performed, followed by
a reboot and then installworld. As a sanity check when installing onto
the running system (DESTDIR is / or unset), attempt to run "sh echo OK"
using rescue from the objdir. If rescue fails (e.g., because the system
has not been rebooted and the "old" kernel lacks a system call required
by the to-be-installed world), abort the installation.
This should avoid ino64 foot-shooting when the proper upgrade procedure
is not followed.
Reviewed by: allanjude, gjb, kib
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D10987
Fix an unnecessary/incorrect check in the PKTOPT_EXTHDRCPY macro.
This macro allocates memory and, if malloc does not return NULL, copies
data into the new memory. However, it doesn't just check whether malloc
returns NULL. It also checks whether we called malloc with M_NOWAIT. That
is not necessary.
While it may be that malloc() will only return NULL when the M_NOWAIT flag
is set, we don't need to check for this when checking malloc's return
value. Further, in this case, the check was not completely accurate,
because it checked for flags == M_NOWAIT, rather than treating it as a bit
field and checking for (flags & M_NOWAIT).
Fix two places in the ICMP6 code where we could dereference a NULL pointer
in the icmp6_input() function.
When processing an ICMP6_ECHO_REQUEST, if IP6_EXTHDR_GET fails, it will
set nicmp6 and n to NULL. Therefore, we should condition our modification
to nicmp6 on n being not NULL.
And, when processing an ICMP6_WRUREQUEST in the (mode != FQDN) case, if
m_dup_pkthdr() fails, the code will set n to NULL. However, the very next
line dereferences n. Therefore, when m_dup_pkthdr() fails, we should
discontinue further processing and follow the same path as when m_gethdr()
fails.
Enforce the limit on ICMP messages before doing work to formulate the
response.
Delete an unneeded rate limit for UDP under IPv6. Because ICMP6
messages have their own rate limit, it is unnecessary to apply a
second rate limit to UDP messages.
Zbigniew Bodek [Tue, 30 May 2017 11:58:51 +0000 (11:58 +0000)]
Move ENA's hw stats updating routine to separate task
Initially, stats were being updated each time OS was requesting for
the first statistic.
To read statistics from hw, condvar was used. cv_timedwait cannot be
called when unsleepable lock is held, and this happens when FreeBSD
is requesting statistic.
Seperate task is reading statistics from NIC each 1 second.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10926
Zbigniew Bodek [Tue, 30 May 2017 11:55:02 +0000 (11:55 +0000)]
Add locks before each ena_up and ena_down
Lock only ena_up and ena_down calls in ioctl handler, instead of whole
ioctl. Locking ioctl with sx lock that is sleepable, is not allowed in
some cases, e.g. when multicast options are being changed.
Additional locking was added in deatch function to prevent race condition
with ioctl function.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10924
Zbigniew Bodek [Tue, 30 May 2017 11:53:18 +0000 (11:53 +0000)]
Add mbuf defragmentation to the ENA driver
When mbuf chain is too long and device cannot handle that number
of segments in DMA transaction, mbuf chain will be defragmented.
Initially, driver was dropping all mbuf chains that were exceeding
supported number of segments.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10923
Both relative and absolute multitouch modes are supported.
To enable psm(4) evdev support one should:
1. Add `device evdev` and `options EVDEV_SUPPORT` to kernel config file
2. Add hw.psm.elantech_support=1 or hw.psm.synaptics_support=1 to
/boot/loader.conf for activation of absolute mode on touchpads
3. Add kern.evdev.rcpt_mask=12 to /etc/sysctl.conf to enable psm event
sourcing and disable sysmouse
Enji Cooper [Mon, 29 May 2017 18:45:10 +0000 (18:45 +0000)]
fma_test: mute a warning about unreachable code on amd64 by restructuring
the #ifdef block to only handle the rest of the logic in the loop in the
#else case.
Reviewed by: emaste, jonathan (previous version)
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D10826
Ed Maste [Mon, 29 May 2017 13:10:01 +0000 (13:10 +0000)]
bsdgrep: bump version number and add Kyle Evans copyright
The following changes have been made over the last couple of months:
Features:
- With bsdgrep -r, the working directory is implied if no directory is
specified
- bsdgrep will now behave as bsdgrep -r does when it's named rgrep
- bsdgrep now understands -z/--null-data to use \0 as EOL
- GNU regex compatibility is now indicated with a "GNU compatible" in
the version string
Fixes:
- --mmap no longer hangs when coming across an EOF without an
accompanying EOL
- -o/--color matching generally improved, now produces earliest /
longest matches
- Context output now more closely aligns with GNU grep
- Zero-length matches no longer exhibit broken behavior
- Every output line now honors -b/-H/-n flags
Tests have been added for previous regressions as well as other
previously untested behaviors.
Various other fixes have been commited, and refactoring for further /
later improvements has taken place.
(The original submission changed the version string to 2.5.2, but I
decided to use 2.6.0 to reflect the addition of new features.)
Emmanuel Vadot [Mon, 29 May 2017 12:51:02 +0000 (12:51 +0000)]
mkimg: Correct an off by one error in the PMBR size
The PMBR last sector should be number of sector - 1 (As stated in UEFI Spec
2.6 page 118 table 17).
This fixes warning printed by linux tools like parted or fdisk.
Disable IPsec debugging code by default when IPSEC_DEBUG kernel option
is not specified.
Due to the long call chain IPsec code can produce the kernel stack
exhaustion on the i386 architecture. The debugging code usually is not
used, but it requires a lot of stack space to keep buffers for strings
formatting. This patch conditionally defines macros to disable building
of IPsec debugging code.
IPsec currently has two sysctl variables to configure debug output:
* net.key.debug variable is used to enable debug output for PF_KEY
protocol. Such debug messages are produced by KEYDBG() macro and
usually they can be interesting for developers.
* net.inet.ipsec.debug variable is used to enable debug output for
DPRINTF() macro and ipseclog() function. DPRINTF() macro usually
is used for development debugging. ipseclog() function is used for
debugging by administrator.
The patch disables KEYDBG() and DPRINTF() macros, and formatting buffers
declarations when IPSEC_DEBUG is not present in kernel config. This reduces
stack requirement for up to several hundreds of bytes.
The net.inet.ipsec.debug variable still can be used to enable ipseclog()
messages by administrator.
PR: 219476
Reported by: eugen
No objection from: #network
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D10869
Wojciech Macek [Mon, 29 May 2017 09:22:53 +0000 (09:22 +0000)]
Introduce Genesys GL3224 quirks
The Genesys chip is failing when issueing READ_CAP(16) command.
Force a quirk to disable it and use READ_CAP(10) instead.
Also, depending on used firmware, GL3224 can be recognized
either as 'storage device' or 'mass storage class' -
enable both variants in scsi_quirk_table.
Submitted by: Wojciech Macek <wma@semihalf.com>
Konrad Adamczyk <ka@semihalf.com>
Obtained from: Semihalf
Sponsored by: Stormshield
Reviewed by: mav
Differential revision: https://reviews.freebsd.org/D10902
Adrian Chadd [Mon, 29 May 2017 07:30:07 +0000 (07:30 +0000)]
[ar71xx] [ar724x] update to work
* add EARLY_PRINTF for debugging
* update module list to be much larger
* add random, otherwise well, stuff doesn't work.
* IPFIREWALL_DEFAULT_TO_ACCEPT
Tested:
* AP93 (AR7240 + AR9280)
TODO:
* rename to std.AR724X
* unify the built module list between all of the mips24k/mips74k atheros config files -
now that the HAL, hwpmc, USB, etc are per-chip/per-arch modules it is easy to just
compile them all and only include the ones you care about.
Adrian Chadd [Mon, 29 May 2017 07:27:08 +0000 (07:27 +0000)]
Update AP93 support to the new world order.
* Map change: create a combined kernel+rootfs image. The instructions I'll post
on the wiki (which will be for a very outdated dev board, but at least will
explain the what/why for posterity) will include how to reset the boot command.
Andriy Gapon [Mon, 29 May 2017 06:30:34 +0000 (06:30 +0000)]
zfs_lookup: fix bogus arguments to lookup of "snapshot" directory
When a parent directory lookup is done at the root of a snapshot mounted
under .zfs/snapshot directory, we need to look up that directory in
the parent filesystem. We achieve that by doing a VOP_LOOKUP operation
on a .zfs vnode with "snapshot" as a target name. But previously we
also passed ISDOTDOT flag to the lookup and, because of that, the lookup
actually returned the parent of the .zfs vnode, that is, a root vnode of
the parent filesystem.
rtwn: fix connection problems with 'options RTWN_WITHOUT_UCODE'
sc_set_media_status() callback may involve some generic code in addition to
firmware-specific part (e.g., link status register setup for RTL8188E);
so, remove 'RTWN_WITHOUT_UCODE' ifdefs around it.
Tested with RTL8188CUS, RTL8188EU and RTL8821AU, STA mode.
Dmitry Chagin [Sun, 28 May 2017 08:46:57 +0000 (08:46 +0000)]
In r246085 some bits that are MI movied out into headers in compat/linux,
but I missed that when I commited x86_64 Linuxulator. So remove the duplicates.
Michal Meloun [Sun, 28 May 2017 06:13:38 +0000 (06:13 +0000)]
Implement sincos, sincosf, and sincosl.
The primary benefit of these functions is that argument
reduction is done once instead of twice in independent
calls to sin() and cos().
* lib/msun/Makefile:
. Add s_sincos[fl].c to the build.
. Add sincos.3 documentation.
. Add appropriate MLINKS.
* lib/msun/Symbol.map:
. Expose sincos[fl] symbols in dynamic libm.so.
* lib/msun/man/sincos.3:
. Documentation for sincos[fl].
* lib/msun/src/k_sincos.h:
. Kernel for sincos() function. This merges the individual kernels
for sin() and cos(). The merger offered an opportunity to re-arrange
the individual kernels for better performance.
* lib/msun/src/k_sincosf.h:
. Kernel for sincosf() function. This merges the individual kernels
for sinf() and cosf(). The merger offered an opportunity to re-arrange
the individual kernels for better performance.
* lib/msun/src/k_sincosl.h:
. Kernel for sincosl() function. This merges the individual kernels
for sinl() and cosl(). The merger offered an opportunity to re-arrange
the individual kernels for better performance.
* lib/msun/src/math.h:
. Add prototytpes for sincos[fl]().
* lib/msun/src/math_private.h:
. Add RETURNV macros. This is needed to reset fpsetprec on I386
hardware for a function with type void.
* lib/msun/src/s_sincos.c:
. Implementation of sincos() where sin() and cos() were merged into
one routine and possibly re-arranged for better performance.
* lib/msun/src/s_sincosf.c:
. Implementation of sincosf() where sinf() and cosf() were merged into
one routine and possibly re-arranged for better performance.
* lib/msun/src/s_sincosl.c:
. Implementation of sincosl() where sinl() and cosl() were merged into
one routine and possibly re-arranged for better performance.
PR: 215977, 218300
Submitted by: Steven G. Kargl <sgk@troutmask.apl.washington.edu>
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D10765
Eric van Gyzen [Sun, 28 May 2017 00:45:28 +0000 (00:45 +0000)]
Fix INSTALL_AS_USER with external nsswitch databases
The INSTALL_AS_USER option tells "install" to use the current
user name as the owner of the installed file. The "install"
command executed by the build is statically linked, so it does not
load nsswitch modules, such as nss_ldap.so, so it fails when
the user is only defined in such a database.
Fix it to use the current UID instead of user name. This works
for all users. I expect it is also slightly more efficient.