Glen Barber [Thu, 7 May 2015 00:27:28 +0000 (00:27 +0000)]
In release.sh, create the /dev directory within the chroot
before attempting to mount(8) devfs. Also, create the
.OBJDIR for the 'release' target, so files end up in the
correct location.
In tools/arm.subr, fix the target device when creating the
gpart partition scheme.
Glen Barber [Wed, 6 May 2015 19:58:12 +0000 (19:58 +0000)]
Add tools/arm.subr to contain common subroutines used for
building arm images. This is similar to tools/vmimage.subr
used for building virtual machine disk images. By default,
only arm_create_disk() and arm_install_base() contain real
functionality here, and arm_install_uboot() must be overridden
in the arm/KERNEL.conf file.
In release.sh, make create_arm_armv6_build_release() do
something now.
In arm/BEAGLEBONE.conf, set IMAGE_SIZE, PART_SCHEME, FAT_SIZE,
FAT_TYPE, and MD_ARGS, as well as make arm_install_uboot()
functional.
Parts of this were taken from disecting a previous BEAGLEBONE
image, and other parts obtained from Crochet sources.
Glen Barber [Wed, 6 May 2015 14:59:16 +0000 (14:59 +0000)]
Move where the configuration file is sourced if '-c'
is specified. If the configuration file does not exist,
proceed with the default options instead of exiting.
Glen Barber [Wed, 6 May 2015 14:35:43 +0000 (14:35 +0000)]
Add documentation for newly-added functions.
While here, move CHROOT_* and RELEASE_* variables from
env_setup() to env_check() since they may change if
a release.conf file is used.
Glen Barber [Wed, 6 May 2015 14:21:51 +0000 (14:21 +0000)]
Add the following functions to release.sh to organize and make
clear the workflow:
- env_setup()
- env_check()
- chroot_setup()
- extra_chroot_setup()
- chroot_build_target()
- chroot_build_release()
There should be no functional changes at this point.
Kashyap D Desai [Wed, 6 May 2015 10:44:08 +0000 (10:44 +0000)]
Bug fixes found internally as detailed below:
1. While disabling interrupt the FW disables interrupts for only 16 vectors.
In case of Invader which supports 96 MSI-x vectors, some spurious interrupts
may come on other vectors even after interrupt disable. So, driver uses a flag
and ignores the spurious interrupts.
2. Reply queue depth is made double the number of commands supported by FW.
3. Misplaced interrupt enable code is now moved down in the OCR path.
4. Updated error handling code in OCR path.
5. Removed un-necessary print.
Kashyap D Desai [Wed, 6 May 2015 10:43:19 +0000 (10:43 +0000)]
Driver calls mrsas_complete_cmd() to call mrsas_wakeup() for each MFI frame that was
issued through the ioctl() interface prior to the kill adapter. This ensures
userspace ioctl() system calls issued just before a kill adapter don't get stuck in
wait state and IOCTLs are returned to application.
Kashyap D Desai [Wed, 6 May 2015 10:42:44 +0000 (10:42 +0000)]
In OCR(Online Controller Reset) path, driver sets adapter state to
MEGASAS_HBA_OPERATIONAL before getting new RAID map.
There will be a small window where IO will come from OS with old RAID map.
This patch will update adapter state to MEGASAS_HBA_OPERATIONAL,
only after driver has new RAID map to avoid any IOs getting build using old RAID map.
Neel Natu [Wed, 6 May 2015 05:40:20 +0000 (05:40 +0000)]
Do a proper emulation of guest writes to MSR_EFER.
- Must-Be-Zero bits cannot be set.
- EFER_LME and EFER_LMA should respect the long mode consistency checks.
- EFER_NXE, EFER_FFXSR, EFER_TCE can be set if allowed by CPUID capabilities.
- Flag an error if guest tries to set EFER_LMSLE since bhyve doesn't enforce
segment limits in 64-bit mode.
Glen Barber [Tue, 5 May 2015 21:08:50 +0000 (21:08 +0000)]
Fix building BEAGLEBONE images with Crochet using the
sysutils/u-boot-beaglebone port:
- In arm/BEAGLEBONE.conf, set EMBEDDEDPORTS to the
sysutils/u-boot-beaglebone port.
- In arm/release.sh, remove BEAGLEBONE from setting WANT_UBOOT
- In tools/arm/crochet-BEAGLEBONE.conf, override the
beaglebone_check_uboot(), and set BEAGLEBONE_UBOOT to
/tmp/external/u-boot-beaglebone, and create symlinks to the
u-boot files in /usr/local/share/u-boot-beaglebone and the
uEnv.txt file in crochet/board/Beaglebone/files.
Glen Barber [Tue, 5 May 2015 16:28:04 +0000 (16:28 +0000)]
Add initial support for building RPI2 images.
In release.sh, allow overriding buildenv_setup() before
the handoff to arm/release.sh.
Copy arm/RPI-B.conf -> arm/RPI2.conf, set UBOOT_PORT and
the correct KERNEL, and add the buildenv_setup() override
to install the sysutils/u-boot-rpi2 port/package.
Copy tools/arm/crochet-RPI-B.conf -> tools/arm/crochet-RPI2.conf,
and set the correct entries for the RaspberryPi2 board.
Thanks to: loos@
Sponsored by: The FreeBSD Foundation
Ian Lepore [Tue, 5 May 2015 16:09:25 +0000 (16:09 +0000)]
Create std.arm and std.armv6 config files and include the right one from
each of the existing kernel configs. This gives a place to put config
that applies to the entire arch.
Add the ARM_NEW_PMAP option to std.armv6. This is working well in early
testing and it's time for wide exposure, but it's still nice to be able
to fall back to the old implementation for testing when a problem comes
along. Eventually the option and the old implementation will go away.
The opportunity now exists to move a whole lot of boilerplate from all the
arm kernel config files into std.arm*, but that's a commit for another day.
Julian Elischer [Tue, 5 May 2015 14:52:33 +0000 (14:52 +0000)]
Tweak seekdir, telldir and readdir so that when htere are deletes going on,
as seek to teh last location saved will still work. This is needed for Samba
to be able to correctly handle delete requests from windows. This does not
completely fix seekdir when deletes are present but fixes the worst of the
problems. The real solution must involve some changes to the API for eh VFS
and getdirentries(2).
Jilles Tjoelker [Tue, 5 May 2015 13:23:03 +0000 (13:23 +0000)]
cp: Remove fts sorting.
In an attempt to improve performance, cp reordered directories first
(although the comment says directories last). This is not effective with new
UFS layout policies.
The sorting reorders multiple arguments passed to cp, which may be
undesirable.
Additionally, the comparison function does not induce a total order. Per
POSIX, this causes undefined behaviour in qsort().
NetBSD removed the sorting in 2009.
On filesystems that return directory entries in hash/btree order, sorting by
d_fileno before statting improves performance on large directories. However,
this can only be implemented in fts(3).
Andriy Gapon [Tue, 5 May 2015 11:01:06 +0000 (11:01 +0000)]
zfs: do not hold an extra reference on a root vnode while a filesystem is mounted
At present zfs_domount() acquires a reference on the filesystem's root vnode
and that reference is kept until zfs_umount.
The latter calls vflush(rootrefs = 1) to dispose of the extra reference.
There is no explanation of why that reference is kept - what problem it
solves or what behavior it improves.
Also, that logic is FreeBSD specific.
There is one real problem with that reference, though.
zfs recv -F may receive a full, non-incremental stream to a mounted filesystem.
In that case the received root object is likely to have a different z_gen
attribute value. Because of that, zfs_rezget will leave the previous root znode
and vnode disassociated from the actual object (z_sa_hdl == NULL).
Thus, future calls to VFS_ROOT() -> zfs_root() will produce a new vnode-znode
pair, while the old one will be kept alive by the outstanding reference.
So, the outstanding reference will not actually be for the new root vnode
(or, more precisely, vnodes - because a root vnode may be recycled and a newer
one can be created).
As a result, when vflush(rootrefs = 1) s called there will be two problems:
- a leaked reference on the old root vnode preventing a graceful unmount
- insufficient references on the actual root vnode leading to a crash upon
access to the vnode after it is destroyed by vgone() + vdrop()
The second issue will actually override the first one.
Andrew Turner [Tue, 5 May 2015 10:35:29 +0000 (10:35 +0000)]
Copy new attribute types when linking. bfd will copy attributes as needed,
however it will fail to output them if the type is not set correctly. This
can happen when it finds an attribute it hasn't seen before, for example
when building shared objects it will use the attributes from crti.o, hwever
this file has no attributes set.
Add apple-boot, apple-hfs and apple-ufs aliases to MBR scheme.
Sort DOSPTYP_* entries in diskmbr.h by value.
Document these scheme-specific types in gpart(8).
Peter Wemm [Tue, 5 May 2015 05:14:12 +0000 (05:14 +0000)]
Fix an error in r281551, part of the getfsstat() / kern_getfsstat()
rework. The number of entries was supposed to be returned to the user,
not used as a scratch variable.
This broke RELENG_4 jails starting up on current systems.
Warner Losh [Tue, 5 May 2015 04:13:48 +0000 (04:13 +0000)]
When dealing with the TI12XX family of parts, we sometimes need to
initialize the MFUNC registers. Our old test of assuming that if this
register is set at all is not quite right. Many scenarios (including
the power-on defaults for chips w/o EEPROMs) land us in trouble. The
MFUNC0 pin should be set to signal #INTA and the MFUNC1 pin should be
set to signal #INTB of multi-socketed devices. Since my memory recalls
issues with blindly clearing the upper bytes of this register, perform
the heuristic only when both MFUNC0 and 1 are clear. We won't work
well using these pins for GPIO, and the serial interrupts won't save
us because we go out of our way to generally disable them. They are
needed to support legacy drivers for 16-bit PC Cards that are
hard-wired to specific IRQ values. Since FreeBSD never had any of
these, we configure the more reliable direct signaling. This was just
one small piece of that which had been left out back in the day.