pjd [Sun, 29 Aug 2010 21:39:49 +0000 (21:39 +0000)]
- Add hook_fini() which should be called after fork() from the main hastd
process, once it start to use hooks.
- Add hook_check_one() in case the caller expects different child processes
and once it can recognize it, it will pass pid and status to hook_check_one().
MFC after: 2 weeks
Obtained from: Wheel Systems Sp. z o.o. http://www.wheelsystems.com
pjd [Sun, 29 Aug 2010 20:18:06 +0000 (20:18 +0000)]
Fix 'zfs allow' (maybe not only) returning:
cannot access dataset system/usr/home: Operation not supported
by including libzfs_impl.h. What libzfs_impl.h does is to redefine ioctl() to
be compatible with OpenSolaris. More specifically OpenSolaris returns ENOMEM
when buffer is too small and sets field zc_nvlist_dst_size to the size that
will be big enough for the data. In FreeBSD case ioctl() doesn't copy data
structure back in case of a failure. We work-around it in kernel and libzfs by
returning 0 from ioctl() and always checking if zc_nvlist_dst_size hasn't
changed. For this work-around to work in pyzfs we need this compatible ioctl()
which is implemented in libzfs_impl.h.
tuexen [Sun, 29 Aug 2010 18:50:30 +0000 (18:50 +0000)]
Fix the the SCTP_WITH_NO_CSUM option when used in combination with
interface supporting CRC offload. While at it, make use of the
feature that the loopback interface provides CRC offloading.
brian [Sun, 29 Aug 2010 11:56:56 +0000 (11:56 +0000)]
Correct an out-by-one error when earlying out ustar filenames that
are too long. Filenames escaping this test are caught later on,
so the bug doesn't cause any breakage.
Document the correct ustar limitations in pax. As I have no access
to the IEEE 1003.2 spec, I can only assume that the limitations
imposed are in fact correct.
Add regression tests for the filename limitations imposed by pax.
jchandra [Sun, 29 Aug 2010 05:39:21 +0000 (05:39 +0000)]
Apply MIPS pmap clean up patch from alc@ (with minor change to KASSERT):
PMAP_DIAGNOSTIC was eliminated from amd64/i386, and, in fact, the
non-MIPS parts of the kernel, several years ago. Any of the interesting
checks were turned into KASSERT()s. Basically, the motivation was that
lots of people run with INVARIANTS but no one runs with DIAGNOSTIC.
panic strings needn't and shouldn't have a terminating newline.
Finally, there is one functional change. The sched_pin() in
pmap_remove_pages() is an artifact of the way we temporarily map page
table pages on i386. (The mappings are processor private. We don't do
a system-wide shootdown.) It isn't needed by MIPS.
rmacklem [Sat, 28 Aug 2010 23:50:09 +0000 (23:50 +0000)]
Add acquisition of a reference count on nfsv4root_lock to the
nfsd_recalldelegation() function, since this function is called
by nfsd threads when they are handling NFSv2 or NFSv3 RPCs, where
no reference count would have been acquired.
rmacklem [Sat, 28 Aug 2010 21:41:18 +0000 (21:41 +0000)]
The timer routine in the experimental NFS server did not acquire
the correct mutex when checking nfsv4root_lock. Although this
could be fixed by adding mutex lock/unlock calls, zack.kirsch at
isilon.com suggested a better fix that uses a non-blocking
acquisition of a reference count on nfsv4root_lock. This fix
allows the weird NFSLOCKSTATE(); NFSUNLOCKSTATE(); synchronization
to be deleted. This patch applies this fix.
Tested by: zack.kirsch at isilon.com
MFC after: 2 weeks
jchandra [Sat, 28 Aug 2010 19:02:51 +0000 (19:02 +0000)]
New driver nlge for XLR/XLS Network Accelerator. This will support the XGMAC
and XAUI 10G interfaces in addition RGMII/SGMII 1G interfaces. This driver
is work in progress.
board.c and board.h expanded to include more info.
Only one of rge and nlge can be enabled at a time, rge will be deprecated
when nlge stabilizes.
Submitted by: Sriram Gorti <srgorti at netlogicmicro com>
tuexen [Sat, 28 Aug 2010 17:59:51 +0000 (17:59 +0000)]
Fix the switching on/off of CMT using sysctl and socket option.
Fix the switching on/off of PF and NR-SACKs using sysctl.
Add minor improvement in handling malloc failures.
Improve the address checks when sending.
kib [Sat, 28 Aug 2010 17:42:08 +0000 (17:42 +0000)]
For some file types, select code registers two selfd structures. E.g.,
for socket, when specified POLLIN|POLLOUT in events, you would have one
selfd registered for receiving socket buffer, and one for sending. Now,
if both events are not ready to fire at the time of the initial scan,
but are simultaneously ready after the sleep, pollrescan() would iterate
over the pollfd struct twice. Since both times revents is not zero,
returned value would be off by one.
Fix this by recalculating the return value in pollout().
mm [Sat, 28 Aug 2010 09:24:11 +0000 (09:24 +0000)]
Import changes from OpenSolaris that provide
- better ACL caching and speedup of ACL permission checks
- faster handling of stat()
- lowered mutex contention in the read/writer lock (rrwlock)
- several related bugfixes
Detailed information (OpenSolaris onnv changesets and Bug IDs):
9749:105f407a2680 6802734 Support for Access Based Enumeration (not used on FreeBSD) 6844861 inconsistent xattr readdir behavior with too-small buffer
9866:ddc5f1d8eb4e 6848431 zfs with rstchown=0 or file_chown_self privilege allows user to "take" ownership
9981:b4907297e740 6775100 stat() performance on files on zfs should be improved 6827779 rrwlock is overly protective of its counters
10143:d2d432dfe597 6857433 memory leaks found at: zfs_acl_alloc/zfs_acl_node_alloc 6860318 truncate() on zfsroot succeeds when file has a component of its path set without access permission
10232:f37b85f7e03e 6865875 zfs sometimes incorrectly giving search access to a dir
10250:b179ceb34b62 6867395 zpool_upgrade_007_pos testcase panic'd with BAD TRAP: type=e (#pf Page fault)
10269:2788675568fd 6868276 zfs_rezget() can be hazardous when znode has a cached ACL
pjd [Sat, 28 Aug 2010 08:57:15 +0000 (08:57 +0000)]
There is a bug in vfs_allocate_syncvnode() failure handling in mount code.
Actually it is hard to properly handle such a failure, especially in MNT_UPDATE
case. The only reason for the vfs_allocate_syncvnode() function to fail is
getnewvnode() failure. Fortunately it is impossible for current implementation
of getnewvnode() to fail, so we can assert this and make
vfs_allocate_syncvnode() void. This in turn free us from handling its failures
in the mount code.
pjd [Sat, 28 Aug 2010 08:30:20 +0000 (08:30 +0000)]
Correct offset conversion to little endian. It was implemented in version 2,
but because of a bug it was a no-op, so we were still using offsets in native
byte order for the host. Do it properly this time, bump version to 4 and set
the G_ELI_FLAG_NATIVE_BYTE_ORDER flag when version is under 4.
rpaulo [Sat, 28 Aug 2010 08:03:29 +0000 (08:03 +0000)]
Register an interrupt vector for DTrace return probes. There is some
code missing in lapic to make sure that we don't overwrite this entry,
but this will be done on a sequent commit.
mav [Sat, 28 Aug 2010 07:24:45 +0000 (07:24 +0000)]
MFata(4):
Add Intel Cougar Point PCH SATA Controller DeviceIDs. Correct some existing
entries for Intel Ibex Peak (5 Series/3400 Series) PCH SATA controllers.
yongari [Sat, 28 Aug 2010 00:34:22 +0000 (00:34 +0000)]
Do not allocate multicast array memory in multicast filter
configuration function. For failed memory allocations, em(4)/lem(4)
called panic(9) which is not acceptable on production box.
igb(4)/ixgb(4)/ix(4) allocated the required memory in stack which
consumed 768 bytes of stack memory which looks too big.
To address these issues, allocate multicast array memory in device
attach time and make multicast configuration success under any
conditions. This change also removes the excessive use of memory in
stack.
yongari [Sat, 28 Aug 2010 00:16:49 +0000 (00:16 +0000)]
If em(4) failed to allocate RX buffers, do not call panic(9).
Just showing some buffer allocation error is more appropriate
action for drivers. This should fix occasional panic reported on
em(4) when driver encountered resource shortage.
jchandra [Fri, 27 Aug 2010 19:53:57 +0000 (19:53 +0000)]
Revamp XLR interrupt handling, the previous scheme does not work well on
SMP.
We used to route all PIC based interrupts to cpu 0, and used the per-CPU
interrupt mask to enable/disable interrupts. But the interrupt threads can
run on any cpu on SMP, and the interrupt thread will re-enable the interrupts
on the CPU it runs on when it is done, and not on cpu0 where the PIC will
still send interrupts to.
The fix is move the disable/enable for PIC based interrupts to PIC, we will
ack on PIC only when the interrupt thread is done, and we do not use the
per-CPU interrupt mask.
The changes also introduce a way for subsystems to add a function that
will be called to clear the interrupt on the subsystem. Currently This is
used by the PCI/PCIe for doing additional work during the interrupt
handling.
pjd [Fri, 27 Aug 2010 14:38:12 +0000 (14:38 +0000)]
- Run hooks in background - don't block waiting for them to finish.
- Keep all hooks we're running in a global list, so we can report when
they finish and also report when they are running for too long.
MFC after: 2 weeks
Obtained from: Wheel Systems Sp. z o.o. http://www.wheelsystems.com
jh [Fri, 27 Aug 2010 11:08:11 +0000 (11:08 +0000)]
Don't attempt to write label with GEOM_BSD based method if the class is
not available. This improves error reporting when bsdlabel(8) is unable
to open a device for writing. If GEOM_BSD was unavailable, only a rather
obscure error message "Class not found" was printed.
pjd [Thu, 26 Aug 2010 23:41:40 +0000 (23:41 +0000)]
- When VFS_VGET() is not supported, switch to VOP_LOOKUP().
- We are fine by only share-locking the vnode.
- Remove assertion that doesn't hold for ZFS where we cross mount points
boundaries by going into .zfs/snapshot/<name>/.
pjd [Thu, 26 Aug 2010 23:33:04 +0000 (23:33 +0000)]
- Check the result of malloc(M_NOWAIT) in replay_alloc(). The caller
(replay_alloc()) knows how to handle replay_alloc() failure.
- Eliminate 'freed_one' variable, it is not needed - when no entry is found
rce will be NULL.
- Add locking assertions where we expect a rc_lock to be held.
imp [Thu, 26 Aug 2010 15:49:52 +0000 (15:49 +0000)]
Make sure TARGET_ABI is defined. TARGET_ABI will die a horrible death
after we get all of TBEMD merged back into head, and make mips64 imply
n64, so don't bother to make this 100% pretty. You'll have to settle
for only 64% pretty.
jkim [Wed, 25 Aug 2010 22:09:02 +0000 (22:09 +0000)]
Add an experimental feature to shadow video BIOS. Long ago, this trick was
supported by many BIOSes to improve performance of VESA BIOS calls for real
mode OSes but it is not our intention here. However, this may help some
platforms where the video ROMs are inaccessible after suspend, for example.
Note it may consume up to 64K bytes of contiguous memory depending on video
controller model when it is enabled. This feature can be disabled by
setting zero to 'debug.vesa.shadow_rom' loader tunable via loader(8) or
loader.conf(5). The default is 1 (enabled), for now.
projects / FreeBSD / FreeBSD.git / log