indent(1): Remove dead code relating to unix-style comments.
The original indent(1) described unix-style comments as similar to box
comments, except the first non-blank character on each line is lined up
with the '*' of the "/*" which appears on a line by itself.
The code has been turned off for ages and -sc/-nsc make it even
less relevant.
The current implementation uses non-temporal writes. This turns out to
be detrimental to performance if the page is used shortly after, which
is the typical case with page faults.
ed [Sun, 31 Jul 2016 08:05:15 +0000 (08:05 +0000)]
Fix up setgrent(3) to have a POSIX-compliant prototype.
Just like with freelocale(3), I haven't been able to find any piece of
code that actually makes use of this function's return value, both in
base and in ports. The reason for this is that FreeBSD seems to be the
only operating system to have such a prototype. This is why I'm deciding
to not use symbol versioning for this.
It does seem that the pw(8) utility depends on the function's typing and
already had a switch in place to toggle between the FreeBSD and POSIX
variant of this function. Clean this up by always expecting the POSIX
variant.
There is also a single port that has a couple of local declarations of
setgrent(3) that need to be patched up. This is in the process of being
fixed.
indent(1): Bail out if there's no more space on the parser stack.
Also increase the stack size still keeping a conservative value of 256.
This is based on a similar changes done for PostgreSQL which instead
uses a stack size of 1000.
Differential Revision: https://reviews.freebsd.org/D6966 (Partial)
Submitted by: Piotr Stefaniak (with changes)
This fixes a very visible issue that may be hidden by some indent.pro
settings as in the example from FreeBSD's /usr/share.
From Piotr's log:
____
To prevent losing tabs from indentation in declarations, FreeBSD indent's
r125624 added code for the most common case when it's an identifier that
is indented, but didn't do anything with the original code that did the
same for any other cases. The other cases are: lparens (function pointer
declaration), asterisks (pointer declaration), stray semicolons, and
commas leading identifiers instead of trailing them.
Use the code added in r125624 (and improved in later commits) to write a
new function indent_declaration() and use it in all places that meant to
indent declarations. In order to indent only once per line, reuse existing
ps.dumped_decl_indent variable that was only used when formatting for
troff (-troff) until now.
____
Both C99 and POSIX directly prohibits any standard function to set errno
to 0. Breaking this rule in 2001 NetBSD hack was imported which attempts
to workaround very limited glob() return codes amount. Use POSIX-compatible
workaround now with E2BIG which can't comes from other functions used
instead of prohibited 0.
parse() is the boot loader's interp_parse.c is too naive about quotes
both single and double quotes were allowed to be mixed, and single
quotes did not follow the usual semantics (re variable expansion).
The old code did not check for terminating quotes
This update implements:
* distinguishing single and double quote
* variable expansion will not be done inside single quote protected area
* will preserve inner quote for values like "value 'some list'"
* ending quote check.
this diff does not implement ending quote order check, it shouldn't
be too hard, needs some improvements on parser state machine.
PR: 204602
Submitted by: Toomas Soome <tsoome@me.com>
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D6000
Rework r303074 case 4. Don't immediatelly skip directory entries which
cause MAXPATHLEN exceeded. Process them first through gl_errfunc() and
GLOB_ERR.
This is used by libdtrace to determine the data model of target processes.
This allows for the creation of pid provider probes in 32-bit processes on
amd64.
librtld_db: Use the auxv to figure out where to look up loader symbols.
Previously, librtld_db just hardcoded /libexec/ld-elf.so, which isn't
correct for processes that aren't using the native ABI. With this change,
librtld_db can be used to inspect non-native processes; in particular,
dtrace -c now works for 32-bit executables on amd64.
indent(1): Attempt to preserve some consistent style.
Remove the excessive braces from r303485 and align the comments to the
right as done in the rest of the code. This is not nice but there is no
clear way to make it nice (and KNF).
- Remove null open/close methods.
- Don't set d_flags to 0 explicitly.
- Remove t5_cdevsw as the .d_name member isn't really used and doesn't
warrant a separate cdevsw just for the name.
- Use ENOTTY as the error value for an unknown ioctl request.
- Use make_dev_s() to close race with setting si_drv1.
libblacklist: Do not use %m for logging, use strerror(errno)
The blacklist library can accept a function to use for logging,
defaulting to vsyslog(), if no function is specified. Make the
blacklist library use strerror(errno) explicitly, instead of %m,
so that the passed in function does not need to support the
syslog specific placeholder.
This matches a change already submitted and accepted upstream.
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
I believe it never worked correctly for more the one queue even in Linux.
This fixes case when one of consumer drivers is not loaded on one side,
but its queues still announced as ready if something else brought link up.
sdp: Use the PCB as the rx completion handler argument.
The generic socket may be detached from the PCB before the completion
queue is drained and destroyed, so this change closes a race condition
in connection teardown.
- Use correct lock in aio_cancel_sync when dequeueing job.
- Add _locked variants of aio_set/clear_cancel_function and use those
to avoid lock recursion when adding and removing fsync jobs to the
per-process sync queue.
- While here, add a basic test for aio_fsync().
Add a loader tunable (hw.pci.enable_pcie_hp) to disable PCI-e HotPlug.
Some systems and/or devices (such as riser cards) do not include a
non-compliant implementation of PCI-e HotPlug that can result in devices
not being attached (e.g. the HotPlug code might assume that a card is
being unplugged and will power the slot off and detach it). This
tunable can be set to 0 to disable support for PCI-e HotPlug ignoring
the incorrect HotPlug state on these slots.
ed [Fri, 29 Jul 2016 17:18:47 +0000 (17:18 +0000)]
Change the return type of freelocale(3) to void.
Our version of this function currently returns an integer indicating
failure or success, whereas POSIX specifies that this function has no
return value. It returns void. Patch up the header, sources and man page
to use the right type. While there, use the opportunity to simplify the
body of this function.
Theoretically speaking, this change breaks the ABI of this function.
That said, I have yet to find any code that makes use of freelocale()'s
return value. I couldn't find any of it in the base system, nor did an
exp-run reveal any breakage caused by this change.
Once more refactor KPI between ntb_transport(4) and if_ntb(4)..
New design allows to attach multiple consumers to ntb_transport(4) instance.
Previous design obtained from Linux theoretically allowed that, but was not
practically usable (Linux also has only one consumer driver now).
xen-intr: fix removal of event channels during resume
Event channel handlers cannot be removed during resume because there might
be an interrupt thread running on a CPU currently blocked in the
cpususpend_handler, which prevents the call to intr_remove_handler from
finishing and completely freezes the system during resume. r291022 tried to
fix this by allowing recursion in intr_remove_handler, but that's clearly
not enough.
Instead don't remove the handlers at the interrupt resume phase, and let
each driver remove the handler by itself during resume. In order to do this,
change the opaque event channel handler cookie to use the global interrupt
vector instead of the event channel port. The event channel port cannot be
used because after resume all event channels are reset, and the port numbers
can change.
Sponsored by: Citrix Systems R&D
MFC after: 5 days
indent(1): Removed whitespace shouldn't be considered in column calculations.
This piece of code removed tabs and space characters from after colons
that follow labels by decrementing the e_lab (end of label) "pointer"
which is later used to calculate the width of the string that fprintf()
puts into "output". But pad_output() gets the length from the actual
string, so it miscalculated what the current column is.
Fixed by putting a string terminator at the e_lab "pointer".
Differential Revision: https://reviews.freebsd.org/D6966
(Partial)
Obtained from: Piotr Stefaniak
xen-netfront: fix trying to send packets with disconnected netfront
In certain circumstances xn_txq_mq_start might be called with num_queues ==
0 during the resume phase after a migration, which can trigger a KASSERT.
Fix this by making sure the carrier is on before trying to transmit, or else
return that the queues are full.
Just as a note, I haven't been able to reproduce this crash on my test
systems, but I still think it's possible and worth fixing.
Reported by: Karl Pielorz <kpielorz_lst@tdx.co.uk>
Sponsored by: Citrix Systems R&D
MFC after: 5 days
Reviewed by: Wei Liu <wei.liu2@citrix.com>
Differential revision: https://reviews.freebsd.org/D7349
ed [Fri, 29 Jul 2016 16:25:09 +0000 (16:25 +0000)]
Mention that basename(3) and dirname(3) will change in the future.
Update the existing manual pages for basename(3) and dirname(3) to
mention that in future versions of FreeBSD, these functions will no
longer use internal buffers for storing the results.
indent(1): Fix breakage caused by single comment following "else".
indent(1) simply wasn't taught that "else" may be followed by a comment
without any opening brace anywhere on the line, so it was very confused
in such cases.
Differential Revision: https://reviews.freebsd.org/D6966 (Partial)
Obtained from: Piotr Stefaniak