Kyle Evans [Wed, 3 Mar 2021 03:38:37 +0000 (21:38 -0600)]
init: use explicit_bzero() for clearing passwords
This is a nop in practice, because it cannot be proven that this
particular bzero() is not significant. Make it explicit anyways, rather
than relying on an implementation detail of how the password is
collected.
Discussed with: Andrew Gierth <andrew tao146 riddles org uk>
ipf_proxy_check() returns -1 for an error and 0 or 1 for success.
ipf_proxy_check()'s callers check for error and if the return code
is 0, they change it to 1 prior to returning to their callers. Simply
by returning -1 or 1 we reduce complexity and cycles burned changing
0 to 1.
The computed IPOIB_CM_RX_SG is too small. It doesn't account for fallback
to mbuf clusters when jumbo frames are not available and it also doesn't
account for the packet header and trailer mbuf.
This causes a memory overwrite situation when IPOIB_CM is configured.
While at it add a kernel assert to ensure the mapping array is not overwritten.
Kristof Provost [Mon, 15 Mar 2021 13:10:55 +0000 (14:10 +0100)]
pf tests: pfsync bulk update test
Test that pfsync works as expected with bulk updates. That is, create
some state before setting up the second firewall. Let that firewall
request a bulk update so it can catch up, and check that it got the
state which was created before it enable pfsync.
Caleb St. John [Fri, 26 Mar 2021 18:00:14 +0000 (14:00 -0400)]
rpc.lockd: Unconditionally close fds as daemon
When lockd is configured with a debug level of > 0 and foreground == 0,
the process is daemonized with a truth noclose argument to daemon().
This doesn't seem to be the desired behavior because that prevents
stdout and stderr from being closed, however, stdout and stderr aren't
used anywhere else. Furthermore, the man pages state that with a higher
debug level it will use the syslog facilities to do so.
Submitted by: Caleb St. John
Discussed with: rmacklem
MFC after: 3 days
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D29415
Caleb St. John [Wed, 24 Mar 2021 20:33:41 +0000 (16:33 -0400)]
align nfsdumpstate column output
There are scenarios where an NFS client will mount an NFSv4 export
without specifying a callback address.
When running nfsdumpstate under this circumstance, the column output is
shifted incorrectly which places the "ClientID" value underneath the
"Clientaddr" column.
This diff is a small cosmetic change that prints a blank in the
"Clientaddr" column and ensures the data for the columns are aligned
appropriately.
Submitted by: Caleb St. John
Reviewed by: sef (previous version)
MFC after: 3 days
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D18958
Wei Hu [Fri, 12 Mar 2021 04:35:16 +0000 (04:35 +0000)]
Hyper-V: hn: Enable vSwitch RSC support in hn netvsc driver
Receive Segment Coalescing (RSC) in the vSwitch is a feature available in
Windows Server 2019 hosts and later. It reduces the per packet processing
overhead by coalescing multiple TCP segments when possible. This happens
mostly when TCP traffics are among different guests on same host.
This patch adds netvsc driver support for this feature.
The patch also updates NVS version to 6.1 as needed for RSC
enablement.
MFC after: 2 weeks
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D29075
Wei Hu [Wed, 24 Feb 2021 05:07:46 +0000 (05:07 +0000)]
Hyper-V: hn: Store host hash value in flowid
When rx packet contains hash value sent from host, store it in
the mbuf's flowid field so when the same mbuf is on the tx path,
the hash value can be used by the host to determine the outgoing
network queue.
Mark Johnston [Thu, 25 Mar 2021 21:55:20 +0000 (17:55 -0400)]
accept_filter: Fix filter parameter handling
For filters which implement accf_create, the setsockopt(2) handler
caches the filter name in the socket, but it also incorrectly frees the
buffer containing the copy, leaving a dangling pointer. Note that no
accept filters provided in the base system are susceptible to this, as
they don't implement accf_create.
Reported by: Alexey Kulaev <alex.qart@gmail.com>
Discussed with: emaste
Security: kernel use-after-free
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Rick Macklem [Tue, 9 Mar 2021 00:08:02 +0000 (16:08 -0800)]
mountd(8): generate a syslog message when the "V4:" line is missing
Daniel reported that NFSv4 mounts were not working despite having
set "nfsv4_server_enable=YES" in /etc/rc.conf. Mountd was logging a
message that there was no /etc/exports file.
He noted that creating a /etc/exports file with a "V4:" line in it
was needed make NFSv4 mounts work.
At least one "V4:" line in one of the exports(5) file(s) is needed to
make NFSv4 mounts work. This patch fixes mountd.c so that it logs a
message indicting that there is no "V4:" line in any exports(5)
file when NFSv4 mounts are enabled.
To avoid this message being generated erroneously, /etc/rc.d/mountd
is updated to make sure vfs.nfsd.server_max_nfsvers is properly set
before mountd(8) is started.
Mark Johnston [Sun, 21 Mar 2021 18:18:10 +0000 (14:18 -0400)]
rtsold: Fix validation of RDNSS options
The header specifies the size of the option in multiples of eight bytes.
The option consists of an eight-byte header followed by one or more IPv6
addresses, so the option is invalid if the size is not equal to 1+2n for
some n>0. Check this.
The bug can cause random stack data to be formatted as an IPv6 address
and passed to resolvconf(8), but a host able to trigger the bug may also
specify arbitrary addresses this way.
Reported by: Q C <cq674350529@gmail.com>
Sponsored by: The FreeBSD Foundation
wpa: import fix for P2P provision discovery processing vulnerability
Latest version available from: https://w1.fi/security/2021-1/
Vulnerability
A vulnerability was discovered in how wpa_supplicant processes P2P
(Wi-Fi Direct) provision discovery requests. Under a corner case
condition, an invalid Provision Discovery Request frame could end up
reaching a state where the oldest peer entry needs to be removed. With
a suitably constructed invalid frame, this could result in use
(read+write) of freed memory. This can result in an attacker within
radio range of the device running P2P discovery being able to cause
unexpected behavior, including termination of the wpa_supplicant process
and potentially code execution.
Vulnerable versions/configurations
wpa_supplicant v1.0-v2.9 with CONFIG_P2P build option enabled
An attacker (or a system controlled by the attacker) needs to be within
radio range of the vulnerable system to send a set of suitably
constructed management frames that trigger the corner case to be reached
in the management of the P2P peer table.
Alexander Motin [Wed, 17 Mar 2021 14:30:40 +0000 (10:30 -0400)]
nvme: Replace potentially long DELAY() with pause().
In some cases like broken hardware nvme(4) may wait minutes for
controller response before timeout. Doing so in a tight spin loop
made whole system unresponsive.
- Call vm_object_reference() before vm_map_lookup_done().
- Use vm_mmap_to_errno() to convert vm_map_* return values to errno.
- Fix memory leak of e->obj.
Kristof Provost [Thu, 11 Mar 2021 10:37:05 +0000 (11:37 +0100)]
pf: pool/kpool conversion code
stuct pf_pool and struct pf_kpool are different. We should not simply
bcopy() them.
Happily it turns out that their differences were all pointers, and the
userspace provided pointers were overwritten by the kernel, so this did
actually work correctly, but we should fix it anyway.
MFC 6eb60f5b7f7d:
Use the word "LinuxKPI" instead of "Linux compatibility", to not confuse with
user-space Linux compatibility support. No functional change.
Stefan Eßer [Sun, 27 Dec 2020 20:53:09 +0000 (21:53 +0100)]
bc: Upgrade to version 3.2.4
This update changes the behavior of "-e" or "-f" in BC_ENV_ARGS:
Use of these options on the command line makes bc exit after executing
the given commands. These options will not cause bc to exit when
passed via the environment (but EOF in STDIN or -e or -f on the
command line will make bc exit as before).
The same applies to DC_ENV_ARGS with regard to the dc program.
Make length(0) and length(0.0) return 1 for compatibility with GNU bc
and the traditional FreeBSD bc.
Fix a potential division by zero error in a non-standard (extended)
math library function.
shu [Wed, 3 Feb 2021 16:51:45 +0000 (16:51 +0000)]
linux: make timerfd_settime(2) set expirations count to zero
On Linux, read(2) from a timerfd file descriptor returns an unsigned
8-byte integer (uint64_t) containing the number of expirations
that have occurred, if the timer has already expired one or more
times since its settings were last modified using timerfd_settime(),
or since the last successful read(2). That's to say, once we do
a read or call timerfd_settime(), timer fd's expiration count should
be zero. Some Linux applications create timerfd and add it to epoll
with LT mode, when event comes, they do timerfd_settime instead
of read to stop event source from trigger. On FreeBSD,
timerfd_settime(2) didn't set the count to zero, which caused high
CPU utilization.
Gordon Bergling [Sat, 13 Mar 2021 18:28:26 +0000 (19:28 +0100)]
find(1): Refine the HISTORY within the manual page.
A simple find command appeared in Version 1 AT&T UNIX and was removed in
Version 3 AT&T UNIX. It was rewritten for Version 5 AT&T UNIX and later
be enhanced for the Programmer's Workbench (PWB). These changes were
later incorporated in AT&T UNIX v7.
Kristof Provost [Wed, 10 Mar 2021 21:56:11 +0000 (22:56 +0100)]
pf: Fully remove interrupt events on vnet cleanup
swi_remove() removes the software interrupt handler but does not remove
the associated interrupt event.
This is visible when creating and remove a vnet jail in `procstat -t
12`.
We can remove it manually with intr_event_destroy().
Kristof Provost [Wed, 3 Mar 2021 10:06:49 +0000 (11:06 +0100)]
altq: Increase maximum number of CBQ and HFSC classes
In some configurations we need more classes than ALTQ supports by
default. Increase the maximum number of classes we allow.
This will only cost us a comparatively trivial amount of memory, so
there's little reason not to do so.
If ever we find we want even more we may want to consider turning these
defines into a tunable, but for now do the easy thing.
netmap: fix memory leak in NETMAP_REQ_PORT_INFO_GET
The netmap_ioctl() function has a reference counting bug in case of
NETMAP_REQ_PORT_INFO_GET command. When `hdr->nr_name[0] == '\0'`,
the function does not decrease the refcount of "nmd", which is
increased by netmap_mem_find(), causing a refcount leak.
Reported by: Xiyu Yang <sherllyyang00@gmail.com>
Submitted by: Carl Smith <carl.smith@alliedtelesis.co.nz>
MFC after: 3 days
PR: 254311
Mitchell Horne [Wed, 10 Mar 2021 14:57:12 +0000 (10:57 -0400)]
ns8250: don't drop IER_TXRDY on bus_grab/ungrab
It has been observed that some systems are often unable to resume from
ddb after entering with debug.kdb.enter=1. Checking the status further
shows the terminal is blocked waiting in tty_drain(), but it never makes
progress in clearing the output queue, because sc->sc_txbusy is high.
I noticed that when entering polling mode for the debugger, IER_TXRDY is
set in the failure case. Since this bit is never tracked by the softc,
it will not be restored by ns8250_bus_ungrab(). This creates a race in
which a TX interrupt can be lost, creating the hang described above.
Ensuring that this bit is restored is enough to prevent this, and resume
from ddb as expected.
The solution is to track this bit in the sc->ier field, for the same
lifetime that TX interrupts are enabled.
PR: 223917, 240122
Sponsored by: The FreeBSD Foundation
Juraj Lutter [Sun, 28 Feb 2021 22:07:14 +0000 (23:07 +0100)]
newsyslog(8): Implement a new 'E' flag to not rotate empty log files
Based on an idea from dvl's coworker, László DANIELISZ, implement
a new flag, 'E', that prevents newsyslog(8) from rotating the empty
log files. This 'E' flag ist mostly usable in conjunction with 'B'
flag that instructs newsyslog(8) to not insert an informational
message into the log file after rotation, keeping it still empty.
Rick Macklem [Tue, 2 Mar 2021 22:18:23 +0000 (14:18 -0800)]
nfsclient: Fix ReadDS/WriteDS/CommitDS nfsstats RPC counts for a NFSv3 DS
During a recent virtual NFSv4 testing event, a bug in the FreeBSD client
was detected when doing I/O DS operations on a Flexible File Layout pNFS
server. For an NFSv3 DS, the Read/Write/Commit nfsstats were incremented
instead of the ReadDS/WriteDS/CommitDS counts.
This patch fixes this.
Only the RPC counts reported by nfsstat(1) were affected by this bug,
the I/O operations were performed correctly.
Rick Macklem [Mon, 1 Mar 2021 20:49:32 +0000 (12:49 -0800)]
nfsclient: Fix the stripe unit size for a File Layout pNFS layout
During a recent virtual NFSv4 testing event, a bug in the FreeBSD client
was detected when doing a File Layout pNFS DS I/O operation.
The size of the I/O operation was smaller than expected.
The I/O size is specified as a stripe unit size in bits 6->31 of nflh_util
in the layout. I had misinterpreted RFC5661 and had shifted the value
right by 6 bits. The correct interpretation is to use the value as
presented (it is always an exact multiple of 64), clearing bits 0->5.
This patch fixes this.
Without the patch, I/O through the DSs work, but the I/O size is 1/64th
of what is optimal.
Rick Macklem [Sun, 28 Feb 2021 22:53:54 +0000 (14:53 -0800)]
nfsclient: add nfs node locking around uses of n_direofoffset
During code inspection I noticed that the n_direofoffset field
of the NFS node was being manipulated without any lock being
held to make it SMP safe.
This patch adds locking of the NFS node's mutex around
handling of n_direofoffset to make it SMP safe.
I have not seen any failure that could be attributed to n_direofoffset
being manipulated concurrently by multiple processors, but I think this
is possible, since directories are read with shared vnode
locking, plus locks only on individual buffer cache blocks.
However, there have been as yet unexplained issues w.r.t reading
large directories over NFS that could have conceivably been caused
by concurrent manipulation of n_direofoffset.
Rick Macklem [Sun, 28 Feb 2021 22:15:32 +0000 (14:15 -0800)]
nfsclient: add checks for a server returning the current directory
Commit 3fe2c68ba20f dealt with a panic in cache_enter_time() where
the vnode referred to the directory argument.
It would also be possible to get these panics if a broken
NFS server were to return the directory as an new object being
created within the directory or in a Lookup reply.
This patch adds checks to avoid the panics and logs
messages to indicate that the server is broken for the
file object creation cases.
Rick Macklem [Sun, 28 Feb 2021 01:54:05 +0000 (17:54 -0800)]
nfsclient: fix panic in cache_enter_time()
Juraj Lutter (otis@) reported a panic "dvp != vp not true" in
cache_enter_time() called from the NFS client's nfsrpc_readdirplus()
function.
This is specific to an NFSv3 mount with the "rdirplus" mount
option. Unlike NFSv4, NFSv3 replies to ReaddirPlus
includes entries for the current directory.
This trivial patch avoids doing a cache_enter_time()
call for the current directory to avoid the panic.
Wei Hu [Thu, 15 Oct 2020 11:44:28 +0000 (11:44 +0000)]
Hyper-V: hn: Relinquish cpu in HN_LOCK to avoid deadlock
The try lock loop in HN_LOCK put the thread spinning on cpu if the lock
is not available. It is possible to cause deadlock if the thread holding
the lock is sleeping. Relinquish the cpu to work around this problem even
it doesn't completely solve the issue. The priority inversion could cause
the livelock no matter how less likely it could happen. A more complete
solution may be needed in the future.
Wei Hu [Thu, 15 Oct 2020 05:57:20 +0000 (05:57 +0000)]
Hyper-V: pcib: Check revoke status during device attach
It is possible that the vmbus pcib channel is revoked during attach path.
The attach path could be waiting for response from host and this response will never
arrive since the channel has already been revoked from host point of view. Check
this situation during wait complete and return failed if this happens.
Wei Hu [Mon, 31 Aug 2020 09:05:45 +0000 (09:05 +0000)]
Hyper-V: storvsc: Enhance srb_status code handling.
In hv_storvsc_io_request() when coring, prevent changing of the send channel
from the base channel to another one. storvsc_poll always probes on the base
channel.
Based upon conversations with Microsoft, changed the handling of srb_status
codes. Most we should never get, others yes. All are treated as retry-able
except for two. We should not get these statuses, but if we ever do, the I/O
state is not known.
Wei Hu [Thu, 30 Jul 2020 07:26:11 +0000 (07:26 +0000)]
Prevent framebuffer mmio space from being allocated to other devices on HyperV.
On Gen2 VMs, Hyper-V provides mmio space for framebuffer.
This mmio address range is not useable for other PCI devices.
Currently only efifb driver is using this range without reserving
it from system.
Therefore, vmbus driver reserves it before any other PCI device
drivers start to request mmio addresses.
Alexander Motin [Thu, 28 Jan 2021 20:53:49 +0000 (15:53 -0500)]
Make software iSCSI more configurable.
Move software iSCSI tunables/sysctls into kern.icl.soft subtree.
Replace several hardcoded length constants there with variables.
While there, stretch the limits to better match Linux' open-iscsi
and our own initiator with new MAXPHYS of 1MB. Our CTL target is
also optimized for up to 1MB I/Os, so there is also a match now.
For Windows 10 and VMware 6.7 initiators at default settings it
should make no change, since previous limits were sufficient there.
Tests of QD1 1MB writes from FreeBSD over 10GigE link show throughput
increase by 29% on idle connection and 132% with concurrent QD8 reads.
Alexander Motin [Wed, 3 Mar 2021 20:21:26 +0000 (15:21 -0500)]
Move ic_check_send_space clear to the actual check.
It closes tiny race when the flag could be set between being cleared
and the space is checked, that would create us some more work. The
flag setting is protected by both locks, so we can clear it in either
place, but in between both locks are dropped.
I think it allowed to avoid some TX thread wakeups while the socket
buffer is full. But add there another options if ic_check_send_space
is set, which means socket just reported that new space appeared, so
it may have sense to pull more data from ic_to_send for better TX
coalescing.
Alexander Motin [Sat, 27 Feb 2021 15:14:05 +0000 (10:14 -0500)]
Micro-optimize OOA queue processing.
- Move ctl_get_cmd_entry() calls from every OOA traversal to when
the requests first inserted, storing seridx in struct ctl_scsiio.
- Move some checks out of the loop in ctl_check_ooa().
- Replace checks for errors that can not happen with asserts.
- Transpose ctl_serialize_table, so that any OOA traversal accessed
only one row (cache line). Compact it from enum to uint8_t.
- Optimize static branch predictions in hottest places.
Due to O(n) nature on deep LUN queues this can be the hottest code
path in CTL, and additional 20% of IOPS I see in some 4KB I/O tests
are good to have in reserve. About 50% of CPU time here according
to the profiles is now spent in two memory accesses per traversed
request in OOA.
Alexander Motin [Sun, 21 Feb 2021 21:45:14 +0000 (16:45 -0500)]
Refactor CTL datamove KPI.
- Make frontends call unified CTL core method ctl_datamove_done()
to report move completion. It allows to reduce code duplication
in differerent backends by accounting DMA time in common code.
- Add to ctl_datamove_done() and be_move_done() callback samethr
argument, reporting whether the callback is called in the same
context as ctl_datamove(). It allows for some cases like iSCSI
write with immediate data or camsim frontend write save one context
switch, since we know that the context is sleepable.
- Remove data_move_done() methods from struct ctl_backend_driver,
unused since forever.
Alexander Motin [Fri, 19 Feb 2021 20:42:57 +0000 (15:42 -0500)]
Microoptimize CTL I/O queues.
Switch OOA queue from TAILQ to LIST and change its direction, so that
we traverse it forward, not backward. There is only one place where
we really need other direction, and it is not critical.
Use STAILQ_REMOVE_HEAD() instead of STAILQ_REMOVE() in backends.
Replace few impossible conditions with assertions.
Alexander Motin [Fri, 19 Feb 2021 03:07:32 +0000 (22:07 -0500)]
Save context switch per I/O for iSCSI and IOCTL frontends.
Introduce new CTL core KPI ctl_run(), preprocessing I/Os in the caller
context instead of scheduling another thread just for that. This call
may sleep, that is not acceptable for some frontends like the original
CAM/FC one, but iSCSI already has separate sleepable per-connection RX
threads, and another thread scheduling is mostly just a waste of time.
IOCTL frontend actually waits for the I/O completion in the caller
thread, so the use of another thread for this has even less sense.
With this change I can measure ~5% IOPS improvement on 4KB iSCSI I/Os
to ZFS.
Dimitry Andric [Wed, 10 Mar 2021 21:31:40 +0000 (22:31 +0100)]
Partially revert libcxxrt changes to avoid _Unwind_Exception change
After the recent cherry-picking of libcxxrt commits 0ee0dbfb0d26 and d2b3fadf2db5, users reported that editors/libreoffice packages from the
official package builders did not start anymore. It turns out that the
combination of these commits subtly changes the ABI, requiring all
applications that depend on internal details of struct _Unwind_Exception
(available via unwind-arm.h and unwind-itanium.h) to be recompiled.
However, the FreeBSD package builders always use -RELEASE jails, so
these still use the old declaration of struct _Unwind_Exception, which
is not entirely compatible. In particular, LibreOffice uses this struct
in its internal "uno bridge" component, where it attempts to setup its
own exception handling mechanism.
To fix this incompatibility, go back to the old declarations of struct
_Unwind_Exception, and restore the __LP64__ specific workaround we had
in place before (which was to cope with yet another, older ABI bug).
Effectively, this reverts upstream libcxxrt commits 88bdf6b290da
("Specify double-word alignment for ARM unwind") and b96169641f79
("Updated Itanium unwind"), and reapplies our commit 3c4fd2463bb2
("libcxxrt: add padding in __cxa_allocate_* to fix alignment").
Gleb Smirnoff [Tue, 8 Dec 2020 16:46:00 +0000 (16:46 +0000)]
The list of ports in configuration path shall be protected by locks,
epoch shall be used only for fast path. Thus use LAGG_XLOCK() in
lagg_[un]register_vlan. This fixes sleeping in epoch panic.
Dimitry Andric [Tue, 23 Feb 2021 20:03:32 +0000 (21:03 +0100)]
Build lib/msun tests with compiler builtins disabled
This forces the compiler to emit calls to libm functions, instead of
possibly substituting pre-calculated results at compile time, which
should help to actually test those functions.
We could just use a C implementation using __builtin_fabs(), but using
this assembly version guarantees that there is no additional prolog/epilog
code. Additionally, clang generates worse code for masking off the top bit
than GCC: https://bugs.llvm.org/show_bug.cgi?id=49377.
This fixes the RISCV64 softfloat world build after cf97d2a1dab8. That commit
added -fno-builtin to the msun tests which resulted in the first references to
fabs (previously the compiler inlined all calls).
Reviewed By: dim
Reported by: mjg
Differential Revision: https://reviews.freebsd.org/D28994
Alexander Motin [Sat, 6 Mar 2021 03:39:52 +0000 (22:39 -0500)]
Do not exit ctl_be_block_worker() prematurely.
Return while there are any I/Os in a queue may result in them stuck
indefinitely, since there is only one taskqueue task for all of them.
I think I've reproduced this by switching ha_role to secondary under
heavy load.
Brandon Bergren [Fri, 13 Nov 2020 16:49:41 +0000 (16:49 +0000)]
[PowerPC] Allow traversal of oversize OF properties.
In standards such as LoPAPR, property names in excess of the usual 31
characters exist.
This breaks property traversal.
While in IEEE 1275-1994, nextprop is defined explicitly to work with a
32-byte region of memory, using a larger buffer should be fine. There is
actually no way to pass a buffer length to the nextprop call in the OF
client interface, so SLOF actually just blindly overflows the buffer.
So we have to defensively make the buffer larger, to avoid memory
corruption when reading out long properties on live OF systems.
Note also that on real-mode OF, things are pretty tight because we are
allocating against a static bounce buffer in low memory, so we can't just
use a huge buffer to work around this without it being wasteful of our
limited amount of 32-bit physical memory.
This allows a patched ofwdump to operate properly on SLOF (i.e. pseries)
systems, as well as any other PowerPC systems with overlength properties.
Brandon Bergren [Mon, 1 Mar 2021 02:35:53 +0000 (20:35 -0600)]
[PowerPC64] Fix multiple issues in fpsetmask().
Building R exposed a problem in fpsetmask() whereby we were not properly
clamping the provided mask to the valid range.
R initilizes the mask by calling fpsetmask(~0) on FreeBSD. Since we
recently enabled precise exceptions, this was causing an immediate
SIGFPE because we were attempting to set invalid bits in the fpscr.
Properly limit the range of bits that can be set via fpsetmask().
While here, use the correct fp_except_t type instead of fp_rnd_t.
Reported by: pkubaj (in IRC)
Sponsored by: Tag1 Consulting, Inc.
Jung-uk Kim [Wed, 3 Mar 2021 23:10:00 +0000 (18:10 -0500)]
libkvm: Plug couple of memory leaks and check possible calloc(3) failure
First, r204494 introduced dpcpu_off in struct __kvm and it was allocated
from _kvm_dpcpu_init() but it was not free(3)'ed from kvm_close(3).
Second, r291406 introduced kvm_nlist2(3) and converted kvm_nlist(3) to
use the new function but it did not free the temporary buffer.
Also, check possible calloc(3) failure while I am in the neighborhood.
projects / FreeBSD / FreeBSD.git / log