glebius [Sat, 23 Feb 2019 06:03:18 +0000 (06:03 +0000)]
Support struct ip_mreqn as argument for IP_ADD_MEMBERSHIP. Legacy support
for struct ip_mreq remains in place.
The struct ip_mreqn is Linux extension to classic BSD multicast API. It
has extra field allowing to specify the interface index explicitly. In
Linux it used as argument for IP_MULTICAST_IF and IP_ADD_MEMBERSHIP.
FreeBSD kernel also declares this structure and supports it as argument
to IP_MULTICAST_IF since r170613. So, we have structure declared but
not fully supported, this confused third party application configure
scripts.
Code handling IP_ADD_MEMBERSHIP was mixed together with code for
IP_ADD_SOURCE_MEMBERSHIP. Bringing legacy and new structure support
into the mess would made the "argument switcharoo" intolerable, so
code was separated into its own switch case clause.
bwidawsk [Fri, 22 Feb 2019 19:54:28 +0000 (19:54 +0000)]
nvdimm: Simple namespace support
Add support for simple NVDIMM v1.2 namespaces from the UEFI
version 2.7 specification. The combination of NVDIMM regions and
labels can lead to a wide variety of namespace layouts. Here we
support a simple subset of namespaces where each NVDIMM SPA range
is composed of a single region per member dimm.
Submitted by: D Scott Phillips <d.scott.phillips@intel.com>
Discussed with: kib
MFC after: 1 week
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D18736
bwidawsk [Fri, 22 Feb 2019 19:54:24 +0000 (19:54 +0000)]
nvdimm: Read NVDIMM namespace labels
When attaching to NVDIMM devices, read and verify the namespace
labels from the special namespace label storage area. A later
change will expose NVDIMM namespaces derived from this label data.
Submitted by: D Scott Phillips <d.scott.phillips@intel.com>
Discussed with: kib
MFC after: 1 week
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D18735
bwidawsk [Fri, 22 Feb 2019 19:54:21 +0000 (19:54 +0000)]
nvdimm: split spa dev into a separate entity
Separate code for exposing a device backed by a system physical
address range away from the NVDIMM spa code. This will allow a
future patch to add support for NVDIMM namespaces while using the
same device code.
Submitted by: D Scott Phillips <d.scott.phillips@intel.com>
Reviewed by: bwidawsk
MFC after: 1 week
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D18736
dab [Fri, 22 Feb 2019 18:43:27 +0000 (18:43 +0000)]
CID 1332000: Logically dead code in sys/dev/pms/RefTisa/tisa/sassata/sas/ini/itdio.c
A pointer is first tested for NULL. If non-NULL, another pointer is
set equal to the first. The second pointer is then checked for NULL
and an error path taken if so. This second test and the associated
path is dead code as the pointer value, having just been checked for
NULL, cannot be NULL at this point. Remove the dead code.
dab [Fri, 22 Feb 2019 15:31:50 +0000 (15:31 +0000)]
Fix several Coverity-detected issues in newsyslog.
- CID 1394815, CID 1305673: Dereference before null check - memory was
allocated and the allocation checked for NULL with a call to errx()
if it failed. Code below that was guaranteed that the pointer was
non-NULL, but there was another check for NULL at the exit of the
function (after the memory had already been referenced). Eliminate
the useless NULL check.
- CID 1007452: Resource leak - Storage intended to be allocated and
returned to the caller was never freed. This was the result of a
regression in the function signature introduced in r208648 (2010)
(thanks for that find, @cem!). Fixed by altering the function
signature and passing the allocated memory to the caller as
intended. This also fixes PR158794.
- CID 1008620: Logically dead code in newsyslog.c - This was a direct
result of CID 1007452. Since the memory allocated as described there
was not returned to the caller, a subsequent check for the memory
having been allocated was dead code. Returning the memory
re-animates the code that is the subject of this CID.
- CID 1006131: Unused value - in parsing a configuration file, a
pointer to the end of the last field was saved, but not used after
that. Rewrite to use the pointer value. This could have been fixed
by avoiding the assignment altogether, but this solutions more
closely follows the pattern used in the preceding code.
imp [Fri, 22 Feb 2019 15:15:36 +0000 (15:15 +0000)]
Rework logpage extensibility.
Move from using a linker set to a constructor function that's
called. This simplifies the code and is slightly more obvious. We now
keep a list of page decoders rather than having an array we managed
before. Commands will move to something similar in the future.
dab [Fri, 22 Feb 2019 14:59:40 +0000 (14:59 +0000)]
Revert r344389 & r343906 - Fix Coverity errors in newsyslog
It was pointed out that a couple of the "memory leak" CIDs that I
fixed were arguably Coverity errors rather than errors in the
newsyslog code and the cure was worse than the disease. Revert both
changes. The first change, which included fixes for other Coverity
errors, will be re-worked to omit the troublesome changes and then
re-committed with the remaining fixes.
bde [Fri, 22 Feb 2019 11:52:40 +0000 (11:52 +0000)]
Quick fix for building LINT on i386. A fix is needed on all arches and
this one should also work on amd64 and sparc64.
LINT was broken in r312910 with the removal of pc98 support, by changing
the pathname in UKBD_DFLT_KEYBAP from a removed pc98 file to a nonexistent
file.
There are many bugs nearby. Some are:
- the error is not properly detected and handled by make(1), because
kbdcontrol(8) exits with status 0 after failing to find the keymap file
- UKBD_DFLT_KEYBAP is supposed to be MI, and is in MI NOTES to try enforce
this, but 5 out of 8 arches don't support it
- LINT seems to have been broken by this in only 7 out of 8 arches. mips
breaks test coverage instead, by killing this option in its MD NOTES.
arm kills ukbd but that is not enough to configure an unsupported option
used only by ukbd.
bde [Fri, 22 Feb 2019 06:41:47 +0000 (06:41 +0000)]
Connect the restored dumb and sc terminal emulators to the kernel build.
Add or fix options to control static and dynamic configuration. Keep
the default of scteken, but default to statically configuring all available
emulators (now 3 instead of 1).
The dumb emulator is almost usable. libedit and libreadline handle
dumb terminals perfectly for at least shell history. less(1) works
as well as possible except on exit. But curses programs make messes.
The dumb emulator has strange color support, with 2 dumb colors for
normal output but fancy colorization for the cursor, mouse pointer and
(with a non-dumb initial emulator) for low-level console output.
Using the sc emulator instead of the default of scteken fixes at least
the following bugs:
- NUL is a printing character in cons25 but not in teken
- teken doesn't support fixed colors for "reverse" video.
- The best versions of sc are about 10 times faster than scteken (for
printing to the frame buffer). This version is only about 5 times
faster.
Fix configuration features:
- make SC_DFLT_TERM (for setting the initial emulator) a normal option.
Add configuration features:
- negative options SC_NO_TERM_* for omitting emulators in the static config.
Modules for emulators might work, but I don't know of any
- vidcontrol -e shows the available emulators
- vidcontrol -E <emulator> sets the active emulator.
markj [Thu, 21 Feb 2019 22:54:17 +0000 (22:54 +0000)]
Fix a tracepoint lookup race in fasttrap_pid_probe().
fasttrap hooks the userspace breakpoint handler; the hook looks up the
breakpoint address in a hash table of tracepoints. It is possible for
the tracepoint to be removed by a different thread in between the
breakpoint trap and the hash table lookup, in which case SIGTRAP gets
delivered to the target process. Fix the problem by adding a
per-process generation counter that gets incremented when a tracepoint
belonging to that process is removed. Then, when a lookup fails, the
trapping instruction is restarted if the thread's counter doesn't match
that of the process.
Reviewed by: cem
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D19273
sef [Thu, 21 Feb 2019 22:49:39 +0000 (22:49 +0000)]
Fix the usage error I introduced in r344192.
Specifically, I put the new option line in the wrong place, and then fixed
up the rest without realizing it. This puts the usage statement back to
what it was, with an additional line for the new -V option.
markj [Thu, 21 Feb 2019 22:49:21 +0000 (22:49 +0000)]
Disconnect fasttrap from the 32-bit powerpc build.
An upcoming bug fix requires 64-bit atomics, which aren't implemented on
powerpc. The powerpc port of fasttrap is incomplete anyway and doesn't
get loaded by dtraceall.ko on powerpc because of a missing dependency;
it's presumed that it's effectively unused.
emaste [Thu, 21 Feb 2019 22:45:54 +0000 (22:45 +0000)]
scp: validate filenames provided by server against wildcard in client
OpenSSH-portable commits:
check in scp client that filenames sent during remote->local directory
copies satisfy the wildcard specified by the user.
This checking provides some protection against a malicious server
sending unexpected filenames, but it comes at a risk of rejecting wanted
files due to differences between client and server wildcard expansion rules.
For this reason, this also adds a new -T flag to disable the check.
reported by Harry Sintonen
fix approach suggested by markus@;
has been in snaps for ~1wk courtesy deraadt@
bde [Thu, 21 Feb 2019 19:19:30 +0000 (19:19 +0000)]
Fix the dumb and sc terminal emulators to compile and work.
First remove ifdefs of the unsupported option SC_DUMB_TERMINAL which
prevented building using both in the same kernel and broke regression
tests. This option will be replaced by per-emulator supported options.
The dumb emulator rotted with KSE in r83366, but usually compiled since
it is ifdefed to nothing unless SC_DUMB_TERMINAL is defined. The type
of an unused function parameter changed.
Both emulators rotted when 2 new methods were added while the emulators
were removed. Only null methods are needed, but null function pointers
give panics instead.
The wildcard in the default for the unsupported option SC_DFLT_TERM
never really worked. It tends to prefer the dumb emulator when multiple
emulators are configured. Change it to prefer scteken for compatibility.
Pull in r353378 from upstream lld trunk (by George Rimar):
[LLD][ELF] - Set DF_STATIC_TLS flag for X64 target
This is the same as D57749, but for x64 target.
"ELF Handling For Thread-Local Storage" p41 says
(https://www.akkadia.org/drepper/tls.pdf):
R_X86_64_GOTTPOFF relocation is used for IE TLS models.
Hence if linker sees this relocation we should add DF_STATIC_TLS flag.
This adds support to lld for the DF_STATIC_TLS flag in shared objects,
which signals to the dynamic linker that the shared object requires
static thread local storage.
See also: https://reviews.freebsd.org/D19072
MFC after: 1 week
bde [Thu, 21 Feb 2019 17:31:33 +0000 (17:31 +0000)]
Move scterm_teken.c from 6 MD files lists to the MI files list so that it
is easier to configure. It is MI, unlike some of the other syscons files
already in the MI list.
Move scvtb.c similarly. It is needed whenever sc is configured, and is
more MI than most of the files already in the MI list.
This only changes the combined list for arm64 and mips. These arches
already cannot build sc or even NOTES.
mav [Thu, 21 Feb 2019 16:47:36 +0000 (16:47 +0000)]
Fix few issues in ioat(4) driver.
- Do not explicitly count active descriptors. It allows hardware reset
to happen while device is still referenced, plus simplifies locking.
- Do not stop/start callout each time the queue becomes empty. Let it
run to completion and rearm if needed, that is much cheaper then to touch
it every time, plus also simplifies locking.
- Decouple submit and cleanup locks, making driver reentrant.
- Avoid memory mapped status register read on every interrupt.
- Improve locking during device attach/detach.
- Remove some no longer used variables.
Reviewed by: cem
MFC after: 1 week
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D19231
emaste [Thu, 21 Feb 2019 15:08:25 +0000 (15:08 +0000)]
svn: support building with WITH_PIE
Subversion builds and links against its own .a archives using local
rules, so did not benefit from with the WITH_PIE library support added
in r344179. Apply the same _pie suffix locally.
Reviewed by: cem
Differential Revision: https://reviews.freebsd.org/D19246
tuexen [Thu, 21 Feb 2019 10:35:32 +0000 (10:35 +0000)]
The receive buffer autoscaling for TCP is based on a linear growth, which
is acceptable in the congestion avoidance phase, but not during slow start.
The MTU is is also not taken into account.
Use a method instead, which is based on exponential growth working also in
slow start and being independent from the MTU.
This is joint work with rrs@.
Reviewed by: rrs@, Richard Scheffenegger
Sponsored by: Netflix, Inc.
Differential Revision: https://reviews.freebsd.org/D18375
tuexen [Thu, 21 Feb 2019 09:34:47 +0000 (09:34 +0000)]
This patch addresses an issue brought up by bz@ in D18968:
When TCP_REASS_LOGGING is defined, a NULL pointer dereference would happen,
if user data was received during the TCP handshake and BB logging is used.
A KASSERT is also added to detect tcp_reass() calls with illegal parameter
combinations.
Reported by: bz@
Reviewed by: rrs@
MFC after: 3 days
Sponsored by: Netflix, Inc.
Differential Revision: https://reviews.freebsd.org/D19254
cem [Thu, 21 Feb 2019 02:41:57 +0000 (02:41 +0000)]
fuse: Fix a regression introduced in r337165
On systems with non-default DFLTPHYS and/or MAXBSIZE, FUSE would attempt to
use a buf cache block size in excess of permitted size. This did not affect
most configurations, since DFLTPHYS and MAXBSIZE both default to 64kB.
The issue was discovered and reported using a custom kernel with a DFLTPHYS
of 512kB.
sef [Thu, 21 Feb 2019 01:30:37 +0000 (01:30 +0000)]
* Handle SIGPIPE in gssd
We've got some cases where the other end of gssd's AF_LOCAL socket gets
closed, resulting in an error (and SIGPIPE) when it tries to do I/O to it.
Closing without cleaning up means the next time nfsd starts up, it hangs,
unkillably; this allows gssd to handle that particular error.
* Limit the retry cound in gssd_syscall to 5.
The default is INT_MAX, which effectively means forever. And it's an
uninterruptable RPC call, so it will never stop.
dab [Wed, 20 Feb 2019 22:05:44 +0000 (22:05 +0000)]
Complete fix for CID 1007454, CID 1007453: Resource leak in newsyslog
The result of a strdup() was stored in a global variable and not freed
before program exit. This is a follow-up to r343906. That change
attempted to plug these resource leaks but managed to miss a code path
on which the leak still occurs. Plug the leak on that path, too.
tsoome [Wed, 20 Feb 2019 21:07:09 +0000 (21:07 +0000)]
loader: really fix cd9660 dirmatch
The cd9660_open() does pass whole path to dirmatch() and we need to
compare only the current path component, not full path.
Additinally, skip over duplicate / (if any) and check if the last component
in the path was meant to be directory (having trailing /). If it is in fact
a file, error out.
dim [Wed, 20 Feb 2019 21:06:11 +0000 (21:06 +0000)]
Pull in r354515 from upstream libc++ trunk:
Fix the build with gcc when `-Wredundant-decls` is passed
Summary:
gcc warns that `__throw_runtime_error` is declared both in
`<__locale>` and `<stdexcept>`, if `-Wredundant-decls` is passed on
the command line; this is the case with FreeBSD when ${WARNS} == 6.
Since `<__locale>` gets its first declaration via a transitive
include of `<stdexcept>`, and the second declaration is after the
first invocation of `__throw_runtime_error`, delete that second
declaration.
Signed-off-by: Enji Cooper <yaneurabeya@gmail.com>
Reviewers: kristina, MaskRay, EricWF, ldionne, ngie
dim [Wed, 20 Feb 2019 20:17:54 +0000 (20:17 +0000)]
Fix more AddressSanitizer violations in usr.bin/top
In line_update(), set lastcol correctly after moving to any non-zero
column, so the "overwrite old stuff" part does not attempt to address
negative offsets in the current line.
Rewrite setup_buffer() to always allocate at least 80 characters,
otherwise various calls to summary_format() will overwrite the end of
the buffers, if the screen width gets small enough.
avg [Wed, 20 Feb 2019 13:19:08 +0000 (13:19 +0000)]
fix userland illumos taskq code to pass relative timeout to cv_timedwait
Unlike illumos, FreeBSD cv_timedwait requires a relative timeout. That
applies both to the kernel illumos compatibility code and to the
userland "fake kernel" code.
kib [Wed, 20 Feb 2019 09:38:19 +0000 (09:38 +0000)]
Implement rangesets.
The data structure implements non-intersecting intervals over the [0,
UINT64_MAX] range, and supports fast insert, predicated clearing of
subrange, and lookup of an interval containing the specified address.
Internally it is a pctrie over the interval start addresses.
Implementation provides additional guarantees over the structure state
in case of memory allocation failures.
Reviewed by: markj
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D18893
bapt [Wed, 20 Feb 2019 06:40:52 +0000 (06:40 +0000)]
calendar: use iconv to respect the output encoding
calendar(1) can have input in various encoding, specifying
LANG=<locale_name> to enable calendar(1) to determine which one to use.
The problem is the content of the calendar itself is exposed as is making it
unreadable in many cases. For example french calendar which is encoded
ISO8859-1 is rendered badly in a fr_FR.UTF-8 environment.
Using iconv allows to solve this issue.
This will also allow to keep only 1 encoding in base for those files without
breaking user existing setup
Reported by: many
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D19221
ian [Wed, 20 Feb 2019 03:00:55 +0000 (03:00 +0000)]
Fix the handling of legacy-format devices in the u-boot loaderdev variable.
When I added support for the standard loader(8) disk0s2a: type formats,
the parsing of legacy format was broken because it also contains a colon,
but it comes before the slice and partition. That would cause disk_parsedev()
to return success with the slice and partition set to wildcard values.
This change examines the string first, and if it contains spaces, dots, or
a colon at any position other than the end, it must be a legacy-format
string and we don't even try to use disk_parsedev() on it.
cem [Wed, 20 Feb 2019 02:49:26 +0000 (02:49 +0000)]
Fuse: whitespace and style(9) cleanup
Take a pass through fixing some of the most egregious whitespace issues in
fs/fuse. Also fix some style(9) warts while here. Not 100% cleaned up, but
somewhat less painful to look at and edit.
bde [Wed, 20 Feb 2019 02:40:38 +0000 (02:40 +0000)]
Fix hangs in r341810 waiting for AP startup.
idle_td is dereferenced without thread-locking it to make its contents is
invariant, and was accessed without telling the compiler that its contents
is invariant. Some compilers optimized accesses to the supposedly invariant
contents by moving the critical checks for changes outside of the loop that
waits for changes. Fix this using atomic ops.
This bug only showed up for the following configuration: a Turion2
system, amd64 kernels, compiled by gcc, and SCHED_4BSD. clang fails
to do the optimization with all CFLAGS that I tried, because it doesn't
fully optimize the '__asm __volatile' for cpu_spinwait() although this
asm has no memory clobber. gcc only does the optimization with most
CFLAGS. I mostly used -Os with all compilers. i386 works because gcc
-m32 -Os only moves 1 or the 2 accesses outside of the loop.
Non-Turion2 systems and SCHED_ULE worked due to different timing (when
all APs start before the BP checks them outside of the loop).
bde [Wed, 20 Feb 2019 02:14:41 +0000 (02:14 +0000)]
Attempt to complete fixing programmable function keys for syscons.
The flag for the driver capability of supporting the fix is independent
of the flag for cons25 mode so that it can be managed independently, but
I forget to preserve it when resetting the terminal.
pjd [Tue, 19 Feb 2019 23:35:55 +0000 (23:35 +0000)]
The way ZFS searches for its vdevs is the following: first it looks for
a vdev that has the same name as the one stored in metadata and that has
all VDEV labels in place. If it cannot find a GEOM provider with the given
name and all VDEV labels it will scan all GEOM providers for the best match
(the most VDEV labels available), but here the name is ignored.
In case the ZFS pool is created, eg. using GPT partition label:
# zpool create tank /dev/gpt/tank
everything works, and on every import ZFS will pick /dev/gpt/tank and
not /dev/da0p4.
The problem occurs when da0p4 is extended and ZFS is unable to find all
VDEV labels in /dev/gpt/tank anymore (the VDEV labels stored at the end
of the partition are now somewhere else). In this case it will scan all
GEOM providers and will pick the first one with the best match, ie. da0p4.
Fix this problem by checking the VDEV/provider name even if we get the same
match. If the name is the same as the one we have in pool's metadata, prefer
this GEOM provider.
Reported by: oshogbo, Michal Mroz <m.mroz@fudosecurity.com>
Tested by: Michal Mroz <m.mroz@fudosecurity.com>
Obtained from: Fudo Security
ngie [Tue, 19 Feb 2019 22:19:31 +0000 (22:19 +0000)]
Make `server_cat(..)` handle short receives
In short, the prior code was far too simplistic when it came to calling recv(2)
and failed intermittently (or in the case of Jenkins, deterministically).
Handle short recv(2)s by checking the return code and incrementing the window
into the buffer by the number of received bytes. If the number of received
bytes <= 0, then bail out of the loop, and test the total number of received
bytes vs the expected number of bytes sent for equality, and base whether or
not the test passes/fails on that fact.
Remove the expected failure, now that the hdtr testcases deterministically pass
on my host after this change [1].
ed [Tue, 19 Feb 2019 21:58:23 +0000 (21:58 +0000)]
Place an upper bound on the number of iterations for REP.
Right now it's possible to invoke the REP escape sequence with a maximum
of tens of millions of iterations. In practice, there is never any need
to do this. Calling it more frequently than the number of cells in the
terminal hardly makes any sense. By placing a limit on it, we can
prevent users from exhausting resources in inside the terminal emulator.
As support for this escape sequence is not present in any of the stable
branches, there is no need to MFC.
markj [Tue, 19 Feb 2019 21:33:02 +0000 (21:33 +0000)]
Limit the number of entries allocated for a REPORT_ZONES command.
The DIOCGETZONE ioctl can be used to fetch the zone list of an SMR
drive, and the caller specifies the number of entries it wants to fetch.
Clamp the caller's request to a sane limit so that a user cannot attempt
large allocations. Callers already need to invoke the ioctl multiple
times to fetch the full list in general, so there's no harm in limiting
the number of entries returned.
Fix style while here.
admbug: 807
Reported by: Ilja Van Sprundel <ivansprundel@ioactive.com>
Reviewed by: asomers, ken
Tested by: ken
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D19249
markj [Tue, 19 Feb 2019 21:22:22 +0000 (21:22 +0000)]
Impose a limit on the number of GEOM_CTL arguments.
Otherwise a privileged user can trigger a memory allocation of
unbounded size, or an integer overflow in the subsequent
geom_alloc_copyin() call, leading to out-of-bounds accesses.
Hard-code a large limit to circumvent this problem.
admbug: 854
Reported by: Anonymous of the Shellphish Grill Team
Reviewed by: ae
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D19251
thj [Tue, 19 Feb 2019 19:57:55 +0000 (19:57 +0000)]
When dropping a fragment queue count the number of fragments in the queue
When dropping a fragment queue, account for the number of fragments in the
queue. This improves accounting between the number of fragments received and
the number of fragments dropped.
imp [Tue, 19 Feb 2019 19:37:02 +0000 (19:37 +0000)]
Remove the i915 and radeon drivers.
Per discussions on arch@ and elsewhere, the maintenance of this code
has moved to the drm-kmod and drm-legacy-kmod ports. Remove the i915
and radeon drivers from the tree.
imp [Tue, 19 Feb 2019 19:36:43 +0000 (19:36 +0000)]
Per discussions on arch@ and elsewhere, retire drm module / drives.
Retire the drm modules / drivers. These are now handled by the
drm-legacy-kmod port and/or the drm-kmod port. All future
development and maintanace will be handled there.
markj [Tue, 19 Feb 2019 15:46:43 +0000 (15:46 +0000)]
Move a racy assertion in filt_pipewrite().
EVFILT_WRITE knotes for pipes live on the knlist for the other end of the
pipe. Since they do not hold a reference on the corresponding file
structure, they may be removed from the knlist by pipeclose() while still
remaining active. In this case, there is no knlist lock acquired before
filt_pipewrite() is called, so the assertion fails.
Fix the problem by first checking whether that end of the pipe has been
closed. These checks are memory safe since the knote holds a reference
on one end of the pipe, and the pipe structure is not freed until both
ends are closed. The checks are not racy since PIPE_EOF is never cleared
after being set, and pipe_present is never set back to PIPE_ACTIVE after
pipeclose() has been called.
PR: 235640
Reported and tested by: pho
Reviewed by: kib
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D19224
trasz [Tue, 19 Feb 2019 12:45:37 +0000 (12:45 +0000)]
Work around the "nfscl: bad open cnt on server" assertion
that can happen when rerooting into NFSv4 rootfs with kernel
built with INVARIANTS.
I've talked to rmacklem@ (back in 2017), and while the root cause
is still unknown, the case guarded by assertion (nfscl_doclose()
being called from VOP_INACTIVE) is believed to be safe, and the
whole thing seems to run just fine.
projects / FreeBSD / FreeBSD.git / log