John Baldwin [Mon, 22 Apr 2013 15:51:06 +0000 (15:51 +0000)]
- Some BIOSes use an Extended IRQ resource descriptor in _PRS for a link
that uses non-ISA IRQs but use a plain IRQ resource in _CRS. However,
a non-ISA IRQ can't fit into a plain IRQ resource. If we encounter a
link like this, build the resource buffer from _PRS instead of _CRS.
- Set the correct size of the end tag in a resource buffer.
Tested by: Benjamin Lee <ben@b1c1l1.com>
MFC after: 2 weeks
Fix two bugs when setting up a plip interface. First, dhcp status was not
being properly cleared each iteration of the loop. Second, values weren't
properly quoted when sent to the editor function.
Adrian Chadd [Mon, 22 Apr 2013 05:52:18 +0000 (05:52 +0000)]
Convert over the etherswitch framework to use VLAN IDs per port, rather
than VLAN groups.
Some chips (eg this rtl8366rb) has a VLAN group per port - you first
define a set of VLANs in a vlan group, then you assign a VLAN group
to a port.
Other chips (eg the AR8xxx switch chips) have a VLAN ID array per
port - there's no group per se, just a list of vlans that can be
configured.
So for now, the switch API will use the latter and rely on drivers
doing the heavy lifting if one wishes to use the VLAN group method.
Maybe later on both can be supported.
PR: kern/177878
PR: kern/177873
Submitted by: Luiz Otavio O Souza <loos.br@gmail.com>
Reviewed by: ray
UI improvements. First, implement --default-item whenever and wherever
possible to save keystrokes. Second, overhaul startup/rcdelete for much
improved performance. Last, but not least, kill-off useage of --clear
and implement --keep-tite in harmony to minimize jarring transitions.
Also, fix local variable names where necessary while we're here with
other minor comment-enhancements/typo-corrections.
Add new flags `-d' (sets debug=1) and `-D file' (sets debugFile) and
improve debugging initialization. Also fixup USAGE statements while we're
here. Also, change initialization of main program to _not_ change working
directory, allowing the debugFile to be relative without confusion.
dup(2): Remove incorrect sentence about getdtablesize().
There are no getdtablesize() bounds on the file descriptor to be duplicated;
it only has to be open. If the RLIMIT_NOFILE rlimit was decreased after
opening the file descriptor, it may be greater than or equal to
getdtablesize() but still valid.
Ed Schouten [Sat, 20 Apr 2013 14:44:28 +0000 (14:44 +0000)]
Enable libcompiler-rt on MIPS.
Originally we disabled libcompiler-rt on MIPS and SPARC64, because of an
issue where __clzdi2 and __ctzdi2 would cause endless recursion. This
bug has been fixed in r230021 already, but for some reason we only
switched to libcompiler-rt on SPARC64 -- not MIPS.
This means we can finally use <stdatomic.h> on all our architectures.
- antarctica: AusAQ and ATAQ have been removed.
- Antarctica/Macquarie has been moved to australasia file and AU.
- Asia/Hebron, Palestine updated for 2013.
- Paraguay stays with DST for the whole year.
- antarctica: AusAQ and ATAQ have been removed.
- Antarctica/Macquarie has been moved to australasia file and AU.
- Asia/Hebron, Palestine updated for 2013.
- Paraguay stays with DST for the whole year.
Make use of newly added libprocstat(3) ability to extract procstat
info from a process core file.
So now one can run procstat(1) on a process core e.g. to get a list of
files opened by a process when it crashed:
root@lisa:/ # procstat -f /root/vi.core
PID COMM FD T V FLAGS REF OFFSET PRO NAME
658 vi text v r r-------- - - - /usr/bin/vi
658 vi ctty v c rw------- - - - /dev/pts/0
658 vi cwd v d r-------- - - - /root
658 vi root v d r-------- - - - /
658 vi 0 v c rw------- 11 3208 - /dev/pts/0
658 vi 1 v c rw------- 11 3208 - /dev/pts/0
658 vi 2 v c rw------- 11 3208 - /dev/pts/0
658 vi 3 v r r----n-l- 1 0 - /tmp/vi.0AYKz3Lps7
658 vi 4 v r rw------- 1 0 - /var/tmp/vi.recover/vi.GaGYsz
658 vi 5 v r rw------- 1 0 - -
Adrian Chadd [Fri, 19 Apr 2013 21:49:11 +0000 (21:49 +0000)]
Initialise the chainmask fields regardless of whether 11n support
is compiled in or not.
This fixes issues with people running -HEAD but who build modules
without doing a "make buildkernel KERNCONF=XXX", thus picking up
opt_*.h. The resulting module wouldn't have 11n enabled and the
chainmask configuration would just be plain wrong.
Update chio(1) and ch(4) to support reporting element designators.
This allows mapping a tape drive in a changer (as reported by
'chio status') to a sa(4) driver instance by comparing the
serial numbers.
The designators can be ASCII (which is printed out directly), binary
(which is printed in hex format) or UTF-8, which is printed in either
native UTF-8 format if the terminal can support it, or in %XX notation
for non-ASCII characters. Thanks to Hiroki Sato <hrs@> for the
explaining UTF-8 printing and example UTF-8 printing code.
chio.h: Modify the changer_element_status structure to add new
fields and definitions from the SMC3r16 spec.
Rename the original CHIOGSTATUS ioctl to OCHIOGTATUS and
define a new CHIOGSTATUS ioctl.
Clean up some tab/space issues.
chio.c: For the 'status' subcommand, print the designator field
if it is supplied by a device.
scsi_ch.h: Add new flags for DVCID and CURDATA to the READ
ELEMENT STATUS command structure.
Add a read_element_status_device_id structure
for the data fields in the new standard. Add new
unions, dt_or_obsolete and voltage_devid, to hold
and address data from either SCSI-2 or newer devices.
scsi_ch.c: Implement support for fetching device IDs with READ
ELEMENT STATUS data.
Add new arguments to scsi_read_element_status() to
allow the user to request the DVCID and CURDATA bits.
This isn't compiled into libcam (it's only an internal
kernel interface), so we don't need any special
handling for the API change.
If the user issues the new CHIOGSTATUS ioctl, copy all of
the available element status data out. If he issues the
OCHIOGSTATUS ioctl, we don't copy the new fields in the
structure.
Fix a bug in chopen() that would result in the peripheral
never getting unheld if chgetparams() failed.
Ed Schouten [Fri, 19 Apr 2013 19:45:00 +0000 (19:45 +0000)]
Add the Clang specific -Wmissing-variable-declarations to WARNS=6.
This compiler flag enforces that that people either mark variables
static or use an external declarations for the variable, similar to how
-Wmissing-prototypes works for functions.
Due to the fact that Yacc/Lex generate code that cannot trivially be
changed to not warn because of this (lots of yy* variables), add a
NO_WMISSING_VARIABLE_DECLARATIONS that can be used to turn off this
specific compiler warning.
Adrian Chadd [Fri, 19 Apr 2013 17:50:38 +0000 (17:50 +0000)]
Implement a very basic multi-PHY aware switch device.
This is intended to be used as a stop-gap for switch devices
which expose multiple ethernet PHYs but we don't have a driver
for - here, etherswitchcfg and the general switch configuration
API can be used to interface to said PHYs.
Submitted by: Luiz Otavio O Souza <loos.br@gmail.com>
sem: Restart the POSIX sem_* calls after signals with SA_RESTART set.
Programs often do not expect an [EINTR] return from sem_wait() and POSIX
only allows it if the signal was installed without SA_RESTART. The timeout
in sem_timedwait() is absolute so it can be restarted normally.
The umtx call can be invoked with a relative timeout and in that case
[ERESTART] must be changed to [EINTR]. However, libc does not do this.
The old POSIX semaphore implementation did this correctly (before r249566),
unlike the new umtx one.
It may be desirable to avoid [EINTR] completely, which matches the pthread
functions and is explicitly permitted by POSIX. However, the kernel must
return [EINTR] at least for signals with SA_RESTART clear, otherwise pthread
cancellation will not abort a semaphore wait. In this commit, only restore
the 8.x behaviour which is also permitted by POSIX.
Rick Macklem [Thu, 18 Apr 2013 23:20:16 +0000 (23:20 +0000)]
When an NFS unmount occurs, once vflush() writes the last dirty
buffer for the last vnode on the mount back to the server, it
returns. At that point, the code continues with the unmount,
including freeing up the nfs specific part of the mount structure.
It is possible that an nfsiod thread will try to check for an
empty I/O queue in the nfs specific part of the mount structure
after it has been free'd by the unmount. This patch avoids this problem by
setting the iodmount entries for the mount back to NULL while holding the
mutex in the unmount and checking the appropriate entry is non-NULL after
acquiring the mutex in the nfsiod thread.