emax [Tue, 6 Dec 2005 17:56:36 +0000 (17:56 +0000)]
Teach sdpd(8) to check peer's credentials before accepting request to
register, remove or change services in the local database. For now only
accept the request if the peer has effective user ID the same as 'root'
user ID.
marius [Tue, 6 Dec 2005 16:38:08 +0000 (16:38 +0000)]
Use <sys/ktr.h> directly in .S files instead of exporting the
KTR_* class macros via genassym.c. Together with sys/sys/ktr.h
rev. 1.34 this has the desired side-effect of providing a default
value for KTR_COMPILE. Thus this fixes warnings from -Wundef
regarding KTR_COMPILE not being defined for .S files.
marius [Tue, 6 Dec 2005 16:37:01 +0000 (16:37 +0000)]
Extend the scope of #ifndef LOCORE to also cover the prototype of
ktr_tracepoint() and the macros using it. This allows this header
to be included in .S files for obtaining the KTR_* class macros
directly and providing a default value for KTR_COMPILE in case it's
not specified in the kernel config file including defining it to 0
when not using 'options KTR' at all.
Drop _MACHINE_ARCH and _MACHINE defines (not to be confused with
MACHINE_ARCH and MACHINE). Their purpose was to be able to test
in cpp(1), but cpp(1) only understands integer type expressions.
Using such unsupported expressions introduced a number of subtle
bugs, which were discovered by compiling with -Wundef.
cpp(1) only understand integer arithmetical expressions, so
_MACHINE == i386 test always succeeds, even on non-i386 (both
sides of expressions become 0). Remove the comment since
_MACHINE and _MACHINE_ARCH are going away.
glebius [Tue, 6 Dec 2005 10:45:49 +0000 (10:45 +0000)]
Optimize parallel processing of ipfw(4) rulesets eliminating the locking
of the radix lookup tables. Since several rnh_lookup() can run in
parallel on the same table, we can piggyback on the shared locking
provided by ipfw(4).
However, the single entry cache in the ip_fw_table can't be used lockless,
so it is removed. This pessimizes two cases: processing of bursts of similar
packets and matching one packet against the same table several times during
one ipfw_chk() lookup. To optimize the processing of similar packet bursts
administrator should use stateful firewall. To optimize the second problem
a solution will be provided soon.
Details:
o Since we piggyback on the ipfw(4) locking, and the latter is per-chain,
the tables are moved from the global declaration to the
struct ip_fw_chain.
o The struct ip_fw_table is shrunk to one entry and thus vanished.
o All table manipulating functions are extended to accept the struct
ip_fw_chain * argument.
o All table modifing functions use IPFW_WLOCK_ASSERT().
davidxu [Tue, 6 Dec 2005 06:02:35 +0000 (06:02 +0000)]
o Add some pad fields into struct sigevent for future extension.
(suggested by alfred@)
o Reuse si_band field in struct __siginfo, add a mqd member which will
be used by mqueue.
o Add code SI_KERNEL to indicate a signal is queued by kernel.
yar [Tue, 6 Dec 2005 05:27:11 +0000 (05:27 +0000)]
Since rc.subr is a library of functions, it should not use exit
every now and then. It is up to the caller to choose a proper
action upon an error condition. Therefore, use return, not exit,
except for some special cases.
imp [Mon, 5 Dec 2005 23:30:28 +0000 (23:30 +0000)]
The Oxford 16C950 based CardBus Serial device that I was given some
time ago appears to be based not on the typical 1.8432MHz clock, or
the other more typical multiple of 8 of this (14.7456MHz), but instead
it appears to be 1/2 the PCI clock rate or 16.50000MHz. I'm not 100%
sure that this is right, but since I did the original entry, I'm going
to go ahead and modify it. With the 14.7456MHz value, I was getting
bits that were ~7.3us instead of ~8.6us like they are supposed to be.
My measuring gear for today is a stupid handheld scope with two
signficant digits. So I don't know if it is 33.000000/2 MHz or some
other value close to 16.5MHz, but 16.5MHz works well enough for me to
use a couple of different devices at 115200 baud, and is a nice even
multiple of a well known clock frequency...
scottl [Mon, 5 Dec 2005 23:25:59 +0000 (23:25 +0000)]
More review and adjustment for reality that should have happened 3 years
ago. Document the real behavior of bus_dma_tag_create, bus_dmamap_load,
and other functions. Also document their arguments and return values.
jhb [Mon, 5 Dec 2005 22:39:09 +0000 (22:39 +0000)]
Change the i386 code to pass the interrupt vector as a separate argument
rather than embedding it in the intrframe as if_vec. This reduces diffs
with amd64 somewhat.
- Remove cf_vec from clockframe (it wasn't used anyway) and stop pushing
dummy vector arguments for ipi_bitmap_handler() and lapic_handle_timer()
since clockframe == trapframe now.
- Fix ddb to handle stack traces across interrupt entry points that just
have a trapframe on their stack and not a trapframe + vector.
- Change intr_execute_handlers() to take a trapframe rather than an
intrframe pointer.
- Change lapic_handle_intr() and atpic_handle_intr() to take a vector and
trapframe rather than an intrframe.
- GC struct intrframe now that nothing uses it anymore.
- GC CLOCK_TO_TRAPFRAME() and INTR_TO_TRAPFRAME().
jhb [Mon, 5 Dec 2005 22:25:41 +0000 (22:25 +0000)]
- Move the code to deal with handling an IPI_STOP IPI out of
ipi_nmi_handler() and into a new cpustop_handler() function. Change
the Xcpustop IPI_STOP handler to call this function instead of
duplicating all the same logic in assembly.
- EOI the local APIC for the lapic timer interrupt in C rather than
assembly.
- Bump the lazypmap IPI counter if COUNT_IPIS is defined in C rather than
assembly.
jhb [Mon, 5 Dec 2005 22:11:44 +0000 (22:11 +0000)]
Don't panic if IRQ 13 doesn't exist. On some machines (see previous
commit to atpic.c) there may not be an IRQ 13. Instead, just keep going.
If the INT16 interface doesn't work then we will eventually panic anyway.
FWIW: We could probably just axe the support for IRQ 13 altogether at this
point. The only thing we'd lose support for are 486sx systems with
external 487 FPUs.
jhb [Mon, 5 Dec 2005 22:09:30 +0000 (22:09 +0000)]
Really slam the door on mixed mode now that we don't depend on it for a
working IRQ0 with APIC anymore. Previously, it was possible to have
some other ATPIC IRQS "leak" through in a few edge cases. For example, on
my x86 test machine, ACPI re-routes the SCI (IRQ 9) to intpin 13 on the
first I/O APIC. This leaves a hole for IRQ 13 (since the APIC doesn't
provide a source for IRQ 13 in that case) with the result that the ATPIC
IRQ13 source was registered instead. This changes the 8259A drivers to
only register their interrupt sources if none of the 16 ISA IRQs have an
interrupt source already installed.
jhb [Mon, 5 Dec 2005 21:44:47 +0000 (21:44 +0000)]
- Move PUSH_FRAME and POP_FRAME into machine/asmacros.h.
- Add a new SET_KERNEL_SREGS macro that sets up %ds and %es to point to
kernel data and %fs to point to per-CPU data and use the new macro
in several kernel entry points including trap and interrupt handlers.
- Convert the IPI_STOP handler Xcpustop to push a standard trap frame
rather than an application frame.
- Make the TRAP() macro private to exception.s since it is only used
there.
- Move the PCPU_*() macros in asmacros.h out of the middle of the
profiling macros.
jhb [Mon, 5 Dec 2005 20:49:45 +0000 (20:49 +0000)]
- Don't make the driver lock recursive, it shouldn't be recursively
acquired anywhere in the driver now.
- Axe the spin mutex used for the nve_oslock*() routines. The driver lock
already provides sufficient synchronization.
- Don't mess around with IFF_UP when the link state changes. IFF_UP is
an administrative flag, not a link status indicator.
jhb [Mon, 5 Dec 2005 20:45:24 +0000 (20:45 +0000)]
Tweak witness handling of lock object to shave 2 pointers off of each
lock object (and thus off of each mutex and sx lock):
- Rename the all_locks list to pending_locks and only put locks initialized
before SI_SUB_WITNESS on the list so that the SI_SUB_WITNESS can add them
to witness once it starts up.
- Now that pending_locks is only used during early startup, change it from
a TAILQ to an STAILQ. This removes a pointer from the STAILQ_ENTRY in
struct lock_object.
- Since the pending_locks list is only used during the single-threaded
early boot it no longer needs to be protected by a mutex, so remove
all_mtx.
- Since the lo_list member of struct lock_object is now only used during
early boot before witness is running, collapse lo_list and lo_witness
into a union. This shaves the second pointer off of struct lock_object.
- Axe lock_cur_cnt and lock_max_cnt.
With these changes, struct mtx shrinks from 36 to 28 bytes on 32-bit
platforms and from 72 to 56 bytes on 64-bit platforms. Note that this
commit will completely and utterly destroy the kernel ABI, so no MFC.
jhb [Mon, 5 Dec 2005 19:50:00 +0000 (19:50 +0000)]
If pci_link has been disabled via the acpi_disable tunable, then bail
immediately from acpi_pci_link_route_interrupt() since we aren't going
to have a valid pci_link device to talk to try to route interrupts. This
fixes a page fault if you disable just pci_link. Note that trying to use
ACPI without pci_link is probably not advised however.
MFC after: 1 week
Tested by: Eugene Grosbein eugen at kuzbass dot ru
avatar [Mon, 5 Dec 2005 19:05:06 +0000 (19:05 +0000)]
Recent nmount(2) adoption in mount_smbfs(8) did not flag the "long" option
since mount_smbfs(8) assumed long name mounting by default unless "-n long"
was explicitly specified.
Rather than supplying a "long" option in mount_smbfs(8), this commit brings
back the original behaviour by associating SMBFS_MOUNT_NO_LONG with the
"nolong" option. This should fix the broken long file names on smbfs people
observed recently.
Reported by: Vladimir Grebenschikov <vova at fbsd dot ru>
Reviewed by: phk
Tested by: Slawa Olhovchenkov <slw at zxy dot spb dot ru>
sos [Mon, 5 Dec 2005 17:33:57 +0000 (17:33 +0000)]
Add support for writing Intel MatrixRAID arrays.
Do a little better on handling volumes as well, however we cant create
multiple volumes from FreeBSD yet.
rwatson [Mon, 5 Dec 2005 13:04:00 +0000 (13:04 +0000)]
Add a simple KVM tool to dump the kernel state of UMA, including walking
the keg/zone lists, summarizing cache state, and walking bucket lists in
each zone. I seem to get inconsistent results on SMP, possibly due to
local header problems, but it seems to work quite well on UP. This tool
requires sufficient privilege to read /dev/mem (or a core dump), and is
for debugging purposes rather than administrative monitoring purposes
(use vmstat instead).
marius [Mon, 5 Dec 2005 12:32:20 +0000 (12:32 +0000)]
- Rev. 1.175 fixed compilation on sparc64 but also backed out zeroing of
the eaddr array (introduced in rev. 1.174) prior to writing to it. As
dc_read_eeprom() is told to write only 3 16-bit words to eaddr but eaddr
in fact is somewhat larger removal of the zeroing defeated the check
whether the MAC address is all zero as there can be some random garbage
in eaddr past the 3 words written to it and the check verifys all bits
in eaddr. Solve this by changing the check to verify only the 3 words
(happenning to be ETHER_ADDR_LEN bytes) written to eaddr.
- While here change the notation of "FCode" in a nearby comment to the
official way.
dougb [Mon, 5 Dec 2005 07:04:15 +0000 (07:04 +0000)]
Change how *.sh scripts are handled. If the script is in /etc/rc.d,
source it into the shell. If not, handle it in a subshell the same
way that "real" rc.d-style scripts are handled. This will dramatically
ease the "process local scripts in the base rcorder" transition.
Add *.bak to the list of files in */rc.d that we ignore.
davidxu [Mon, 5 Dec 2005 03:23:27 +0000 (03:23 +0000)]
Handle SIGEV_NONE, if notification is SIGEV_NONE, error status and
return status will be set, but no notification will be registered.
Increase hard limit of maxmsg to 100, so posixtestsuite ports can run.
stefanf [Sun, 4 Dec 2005 18:44:21 +0000 (18:44 +0000)]
Add the times builtin. It reports the user and system time for the shell
itself and its children. Instead of calling times() (as implied by POSIX) this
implementation directly calls getrusage() to get the times because this is more
convenient.
bde [Sun, 4 Dec 2005 13:52:46 +0000 (13:52 +0000)]
Fixed the approximation to pio4. pio4_hi must be pio2_hi/2 since it
shares its low half with pio2_hi. pio2_hi is rounded down although
rounding to nearest would be a tiny bit better, so pio4_hi must be
rounded down too. It was rounded to nearest, which happens to be
different in float precision but the same in double precision.
This fixes about 13.5 million errors of more than 1 ulp in asinf().
The largest error was 2.81 ulps on amd64 and 2.57 ulps on i386 -O1.
Now the largest error is 0.93 ulps on amd65 and 0.67 ulps on i386 -O1.
bde [Sun, 4 Dec 2005 12:30:44 +0000 (12:30 +0000)]
For log1pf(), fixed the approximations to sqrt(2), sqrt(2)-1 and
sqrt(2)/2-1. For log1p(), fixed the approximation to sqrt(2)/2-1.
The end result is to fix an error of 1.293 ulps in
log1pf(0.41421395540 (hex 0x3ed413da))
and an error of 1.783 ulps in
log1p(-0.292893409729003961761) (hex 0x12bec4 00000001)).
The former was the only error of > 1 ulp for log1pf() and the latter
is the only such error that I know of for log1p().
The approximations don't need to be very accurate, but the last 2 need
to be related to the first and be rounded up a little (even more than
1 ulp for sqrt(2)/2-1) for the following implementation-detail reason:
when the arg (x) is not between (the approximations to) sqrt(2)/2-1
and sqrt(2)-1, we commit to using a correction term, but we only
actually use it if 1+x is between sqrt(2)/2 and sqrt(2) according to
the first approximation. Thus we must ensure that
!(sqrt(2)/2-1 < x < sqrt(2)-1) implies !(sqrt(2)/2 < x+1 < sqrt(2)),
where all the sqrt(2)'s are really slightly different approximations
to sqrt(2) and some of the "<"'s are really "<="'s. This was not done.
In log1pf(), the last 2 approximations were rounded up by about 6 ulps
more than needed relative to a good approximation to sqrt(2), but the
actual approximation to sqrt(2) was off by 3 ulps. The approximation
to sqrt(2)-1 ended up being 4 ulps too small, so the algoritm was
broken in 4 cases. The result happened to be broken in 1 case. This
is fixed by using a natural approximation to sqrt(2) and derived
approximations for the others.
In logf(), all the approximations made sense, but the approximation
to sqrt(2)/2-1 was 2 ulps too small (a tiny amount, since we compare
with a granularity of 2**32 ulps), so the algorithm was broken in 2
cases. The result was broken in 1 case. This is fixed by rounding
up the approximation to sqrt(2)/2-1 by 2**32 ulps, so 2**32 cases are
now handled a little differently (still correctly according to my
assertion that the approximations don't need to be very accurate, but
this has not been checked).
There no longer seems to be this bug in gcc(1). Remove the
badly implemented workaround that caused a workaround to be
applied to all architectures, not only amd64.
stefanf [Sun, 4 Dec 2005 09:34:56 +0000 (09:34 +0000)]
Merge NetBSD's revision 1.27. This bug can be observed eg. when browsing
through the history in sh.
| Refresh bug reported by Julien Torres:
|
| going from:
| activate -verbose
| to:
| reset -activation
| results in:
| reset -activationverbose"
| instead of:
| reset -activation
|
| This is because we choose to insert "reset -" before the current line,
| and the delete "e -" and insert "ion" in the appropriate place. The
| cleareol code did not handle this case properly; we now cleareol to
| the maximum number of characters of the first difference, the second
| difference and the difference in line length.
bde [Sun, 4 Dec 2005 08:57:54 +0000 (08:57 +0000)]
Use the usual volatile hack to trick gcc into clipping any extra precision
on assignment.
Extra precision on i386's broke hi+lo decomposition in the usual way.
It caused all except 1 of the 62343 errors of more than 1 ulp for
log1pf() on i386's with gcc -O [-fno-float-store].
sam [Sun, 4 Dec 2005 04:50:27 +0000 (04:50 +0000)]
Adhoc mode fixups:
o plug memory leak in adhoc mode: on rx the sender may be the
current master so simply checking against ic_bss is not enough
to identify if the packet comes from an unknown sender; must
also check the mac address
o split neighbor node creation into two routines and fillin state
of nodes faked up on xmit when a beacon or probe response frame
is later received; this ensures important state like the rate set
and advertised capabilities are correct
philip [Sun, 4 Dec 2005 00:28:40 +0000 (00:28 +0000)]
Add "yet another" moused(8) hack: suspend handling mouse events when SIGUSR1
is caught. Can be assigned to a window manager shortcut to prevent accidents
with touchpads.
jhb [Sat, 3 Dec 2005 21:17:17 +0000 (21:17 +0000)]
Force any hardwire-routed interrupts to level trigger and active low
polarity. Some machines route PCI IRQs to an ISA IRQ but fail to include
an interrupt override entry to set the polarity and trigger of the given
ISA IRQ in their MADT table.
PR: usb/74989
Reported by: Julien Gabel jpeg at thilelli dot net
MFC after: 1 week
marius [Sat, 3 Dec 2005 19:52:20 +0000 (19:52 +0000)]
- Move the declaration of struct upa_ranges and the UPA_RANGE_* macros
from sys/sparc64/include/ofw_upa.h to sys/sparc64/pci/ofw_pci.h and
rename them to struct ofw_pci_ranges and OFW_PCI_RANGE_* respectively.
This ranges struct only applies to host-PCI bridges but no to other
bridges found on UPA. At the same time it applies to all host-PCI
bridges regardless of whether the interconnection bus is Fireplane/
Safari, JBus or UPA.
- While here rename the PCI_CS_* macros in sys/sparc64/pci/ofw_pci.h
to OFW_PCI_CS_* in order to be consistent and change this header to
use uintXX_t instead of u_intXX_t.