Rework atse_rx_cycles handling: count packets instead of fills, and use the
limit only when polling, not when in interrupt mode. Otherwise, we may
stop reading the FIFO midpacket and clear the event mask even though the
FIFO still has data to read, which could stall receive when a large packet
arrives. Add a comment about races in the Altera FIFO interface: we may
need to do a little more work to handle races than we are.
Experimentation suggests that the Altera Triple-Speed Ethernet documentation
is incorrect and bits in the event and interrupt-enable registers are not
irrationally rearranged relative to the status register.
Substantially rework interrupt handling in the atse(4) driver:
- Introduce a new macro ATSE_TX_PENDING() which checks whether there is
any pending data to transmit, either in an in-progress packet or in
the TX queue.
- Introduce new ATSE_RX_STATUS_READ() and ATSE_TX_STAUTS_WRITE() macros
that query the FIFO status registers rather than event registers,
offering level- rather than edge-triggered FIFO conditions.
- For RX, interrupt only on full/overflow/underflow; for TX, interrupt
only on empty/overflow/underflow.
- Add new ATSE_RX_INTR_READ() and ATSE_RX_INTR_WRITE() macros useful for
debugging interrupt behaviour.
- Add a debug.atse_intr_debug_enable sysctl that causes various pieces
of FIFO state to be printed out on each RX or TX interrupt. This is
disabled by default but good to turn on if the interface appears to
wedge. Also print debugging information when polling.
- In the watchdog handler, do receive, not just transmit, processing, to
ensure that the rx, not just tx, queue is being handled -- and, in
particular, will be drained such that interrupts can resume.
- Rework both atse_rx_intr() and atse_tx_intr() to eliminate many race
conditions, and add comments on why various things are in various
orders. Interactions between modifications to the event and interrupt
masks are quite subtle indeed, and we must actively check for a number
of races (e.g., event mask cleared; packet arrives; interrupts enabled).
We also now use the status registers rather than event registers for
FIFO status checks to avoid other races; we continue to use event
registers for underflow/overflow.
With this change, interrupt-driven operation of atse appears (for the
time being) robust.
Fix source address selection on unbound sockets in the presence of multiple
fibs. Use the mbuf's or the socket's fib instead of RT_ALL_FIBS. Fixes PR
187553. Also fixes netperf's UDP_STREAM test on a nondefault fib.
sys/netinet/ip_output.c
In ip_output, lookup the source address using the mbuf's fib instead
of RT_ALL_FIBS.
sys/netinet/in_pcb.c
in in_pcbladdr, lookup the source address using the socket's fib,
because we don't seem to have the mbuf fib. They should be the same,
though.
tests/sys/net/fibs_test.sh
Clear the expected failure on udp_dontroute.
Use a consistent type for the number of HMAC algorithms.
This fixes a bug which resulted in a warning on the userland
stack, when compiled on Windows.
Thanks to Peter Kasting from Google for reporting the issue and
provinding a potential fix.
Small cleanup which addresses a warning regaring the truncation
of a 64-bit entity to a 32-bit entity. This issue was reported by
Peter Kasting from Google.
FreeBSD-SA-14:19.tcp raised attention to the state of our stack
towards blind SYN/RST spoofed attack.
Originally our stack used in-window checks for incoming SYN/RST
as proposed by RFC793. Later, circa 2003 the RST attack was
mitigated using the technique described in P. Watson
"Slipping in the window" paper [1].
After that, the checks were only relaxed for the sake of
compatibility with some buggy TCP stacks. First, r192912
introduced the vulnerability, just fixed by aforementioned SA.
Second, r167310 had slightly relaxed the default RST checks,
instead of utilizing net.inet.tcp.insecure_rst sysctl.
In 2010 a new technique for mitigation of these attacks was
proposed in RFC5961 [2]. The idea is to send a "challenge ACK"
packet to the peer, to verify that packet arrived isn't spoofed.
If peer receives challenge ACK it should regenerate its RST or
SYN with correct sequence number. This should not only protect
against attacks, but also improve communication with broken
stacks, so authors of reverted r167310 and r192912 won't be
disappointed.
o Revert r167310.
o Implement "challenge ACK" protection as specificed in RFC5961
against RST attack. On by default.
- Carefully preserve r138098, which handles empty window edge
case, not described by the RFC.
- Update net.inet.tcp.insecure_rst description.
o Implement "challenge ACK" protection as specificed in RFC5961
against SYN attack. On by default.
- Provide net.inet.tcp.insecure_syn sysctl, to turn off
RFC5961 protection.
The changes were tested at Netflix. The tested box didn't show
any anomalies compared to control box, except slightly increased
number of TCP connection in LAST_ACK state.
Reviewed by: rrs
Sponsored by: Netflix
Sponsored by: Nginx, Inc.
Make a type conversion explicit. When compiling this code on
Windows as part of the SCTP userland stack, this fixes a
warning reported by Peter Kasting from Google.
Cache GELI passphrases entered at the console during the boot process,
in order to improve user-friendliness when a system has multiple disks
encrypted using the same passphrase.
When examining a new GELI provider, the most recently used passphrase
will be attempted before prompting for a passphrase; and whenever a
passphrase is entered, it is cached for later reference. When the root
disk is mounted, the cached passphrase is zeroed (triggered by the
"mountroot" event), in order to minimize the possibility of leakage
of passphrases. (After root is mounted, the "taste and prompt for
passphrases on the console" code path is disabled, so there is no
potential for a passphrase to be stored after the zeroing takes place.)
This behaviour can be disabled by setting kern.geom.eli.boot_passcache=0.
Reviewed by: pjd, dteske, allanjude
MFC after: 7 days
* Makefile:
. Hook e_lgammal[_r].c to the build.
. Create man page links for lgammal[-r].3.
* Symbol.map:
. Sort lgammal to its rightful place.
. Add FBSD_1.4 section for the new lgamal_r symbol.
* ld128/e_lgammal_r.c:
. 128-bit implementataion of lgammal_r().
* ld80/e_lgammal_r.c:
. Intel 80-bit format implementation of lgammal_r().
* src/e_lgamma.c:
. Expose lgammal as a weak reference to lgamma for platforms
where long double is mapped to double.
* src/e_lgamma_r.c:
. Use integer literal constants instead of real literal constants.
Let compiler(s) do the job of conversion to the appropriate type.
. Expose lgammal_r as a weak reference to lgamma_r for platforms
where long double is mapped to double.
* src/e_lgammaf_r.c:
. Fixed the Cygnus Support conversion of e_lgamma_r.c to float.
This includes the generation of new polynomial and rational
approximations with fewer terms. For each approximation, include
a comment on an estimate of the accuracy over the relevant domain.
. Use integer literal constants instead of real literal constants.
Let compiler(s) do the job of conversion to the appropriate type.
This allows the removal of several explicit casts of double values
to float.
* src/e_lgammal.c:
. Wrapper for lgammal() about lgammal_r().
adrian [Mon, 15 Sep 2014 21:09:19 +0000 (21:09 +0000)]
Disable flow-director support until it's been debugged and verified.
The flowdirector feature shares on-chip memory with other things
such as the RX buffers. In theory it should be configured in a way
that doesn't interfere with the rest of operation. In practice,
the RX buffer calculation didn't take the flow-director allocation
into account and there'd be overlap. This lead to various garbage
frames being received containing what looks like internal NIC state.
What _I_ saw was traffic ending up in the wrong RX queues.
If I was doing a UDP traffic test with only one NIC ring receiving
traffic, everything is fine. If I fired up a second UDP stream
which came in on another ring, there'd be a few percent of traffic
from both rings ending up in the wrong ring. Ie, the RSS hash would
indicate it was supposed to come in ring X, but it'd come in ring Y.
However, when the allocation was fixed up, the developers at Verisign
still saw traffic stalls.
The flowdirector feature ends up fiddling with the NIC to do various
attempts at load balancing connections by populating flow table rules
based on sampled traffic. It's likely that all of that has to be
carefully reviewed and made less "magic".
So for now the flow director feature is disabled (which fixes both
what I was seeing and what they were seeing) until it's all much
more debugged and verified.
Tested:
* (me) 82599EB 2x10G NIC, RSS UDP testing.
* (verisign) not sure on the NIC (but likely 82599), 100k-200k/sec TCP
transaction tests.
Submitted by: Marc De La Gueronniere <mdelagueronniere@verisign.com>
MFC after: 1 week
Sponsored by: Verisign, Inc.
Add stricter checking of some mmap() arguments:
- Fail with EINVAL if an invalid protection mask is passed to mmap().
- Fail with EINVAL if an unknown flag is passed to mmap().
- Fail with EINVAL if both MAP_PRIVATE and MAP_SHARED are passed to mmap().
- Require one of either MAP_PRIVATE or MAP_SHARED for non-anonymous
mappings.
xen: don't set suspend/resume methods for the PIRQ PIC
The suspend/resume of event channels is already handled by the xen_intr_pic.
If those methods are set on the PIRQ PIC they are just called twice, which
breaks proper resume. This fix restores migration of FreeBSD guests to a
working state.
Provide the unique implementation for the VOP_GETPAGES() method used
by ffs and ext2fs. Remove duplicated call to vm_page_zero_invalid(),
done by VOP and by vm_pager_getpages(). Use vm_pager_free_nonreq().
Reviewed by: alc (previous version)
Sponsored by: The FreeBSD Foundation
MFC after: 6 weeks (after r271596)
ian [Sun, 14 Sep 2014 23:48:18 +0000 (23:48 +0000)]
Use gic_decode_fdt() rather than a local routine to parse fdt interrupt
properties. Move fdt_pic_table and fdt_fixup_table into imx6_machdep.c,
which means imx6 doesn't need imx_common.c anymore.
Add couple memory barries to serialize tdq_cpu_idle and tdq_load accesses.
This change fixes transient performance drops in some of my benchmarks,
vanishing as soon as I am trying to collect any stats from the scheduler.
It looks like reordered access to those variables sometimes caused loss of
IPI_PREEMPT, that delayed thread execution until some later interrupt.
Fix PowerPC backtraces. Since kernel and user have completely separate address
spaces, rather than a split address, we actually can't check for being within
the kernel's address range. Instead, do what other backtraces do, and use
trapexit()/asttrapexit() as the stack sentinel.
ian [Sun, 14 Sep 2014 21:21:03 +0000 (21:21 +0000)]
Add a common routine for parsing FDT data describing an ARM GIC interrupt.
In the fdt data we've written for ourselves, the interrupt properties
for GIC interrupts have just been a bare interrupt number. In standard
data that conforms to the published bindings, GIC interrupt properties
contain 3-tuples that describe the interrupt as shared vs private, the
interrupt number within the shared/private address space, and configuration
info such as level vs edge triggered.
The new gic_decode_fdt() function parses both types of data, based on the
#interrupt-cells property. Previously, each platform implemented a decode
routine and put a pointer to it into fdt_pic_table. Now they can just
list this function in their table instead if they use arm/gic.c.
dim [Sun, 14 Sep 2014 18:50:38 +0000 (18:50 +0000)]
Pull in r217410 from upstream llvm trunk (by Bob Wilson):
Set trunc store action to Expand for all X86 targets.
When compiling without SSE2, isTruncStoreLegal(F64, F32) would return
Legal, whereas with SSE2 it would return Expand. And since the Target
doesn't seem to actually handle a truncstore for double -> float, it
would just output a store of a full double in the space for a float
hence overwriting other bits on the stack.
Patch by Luqman Aden!
This should fix clang -O0 on i386 assigning garbage to floats, in
certain scenarios.
Avoid an exclusive acquisition of the object lock on the expected execution
path through the NFS clients' getpages functions.
Introduce vm_pager_free_nonreq(). This function can be used to eliminate
code that is duplicated in many getpages functions. Also, in contrast to
the code that currently appears in those getpages functions,
vm_pager_free_nonreq() avoids acquiring an exclusive object lock in one
case.
ian [Sun, 14 Sep 2014 17:47:04 +0000 (17:47 +0000)]
Add compat strings for all the flavors of GIC this driver should support.
Also allow the driver to attach to ofwbus as well as simplebus, some FDT
data puts the root interrupt controller on the root bus.
ian [Sun, 14 Sep 2014 17:36:57 +0000 (17:36 +0000)]
Fix an undefined variable that was accidentally not causing an error.
The code had references to both intr_offset and intr_parent variable names
as referring to the parent interrupt node. The intr_parent variable
wasn't actually defined anywhere, but the only references to it were as
an argument to a macro that didn't use that argument in expansion, so
the undefined variable accidentally didn't cause an error.
The intr_parent name makes more sense in context, so change all occurrances
of intr_offset to intr_parent.
devq_openings counter lost its meaning after allocation queues has gone.
held counter is still meaningful, but problematic to update due to separate
locking of CCB allocation and queuing.
To fix that replace devq_openings counter with allocated counter. held is
now calculated on request as difference between number of allocated, queued
and active CCBs.
Fix mis-spelling of bits and types names in the vnode_pager_putpages().
The changes should not modify the generated code.
The pager->pgo_putpages() method takes int flags as its fourth
argument, while vnode_pager_putpages() used boolean_t (which is
typedef'ed to int). The flags are from VM_PAGER_* namespace, while
vnode_pager_putpages() passed TRUE and OBJPC_SYNC to VOP_PUTPAGES(),
which both are numerically equal to VM_PAGER_PUT_SYNC.
Noted and reviewed by: alc (previous version)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
kan [Sun, 14 Sep 2014 00:02:37 +0000 (00:02 +0000)]
Add delay to Octeon MDIO access routines.
Prevent saturattion of the bus by constant polling which in
extreme cases can cause interface lockup. This makes FreeBSD
match similar case in the executive.
Rename the choices in the partitioning methods dialog to reflect current
reality. In particular, draw a connection between the auto ZFS script and
the auto UFS one, since they fulfill similar functions. I'm not sure the
auto ZFS code is actually experimental anymore, so it might be worth
changing that label still.
Make the default choice for the chroot shell at the end be "No". This allows
just pressing enter repeatedly to successfully install a reasonable system.
When asked to find a hole, the DMU sees that there are no holes in the
object, and returns ESRCH. The ZPL interprets this as "no holes before
the end of the file", and therefore inserts the "virtual hole" at the
end of the file. Because DMU and ZPL have different ideas of where the
end of an object/file is, we will end up returning the end of file,
which is generally larger, instead of returning the end of object.
The fix is to handle the "virtual hole" in the DMU. If no hole is found,
the DMU will return a hole at the end of the file, rather than an error.
Illumos issue:
5139 SEEK_HOLE failed to report a hole at end of file
ian [Sat, 13 Sep 2014 17:38:26 +0000 (17:38 +0000)]
Make inclusion of fdt clock support conditional on fdt_clock, not just fdt.
There are plenty of platforms that use fdt without needing the overhead of
the new clock support routines.
Add a new tunable/sysctl, vfs.zfs.free_max_blocks, which can be used to
limit how many blocks can be free'ed before a new transaction group is
created. The default is no limit (infinite), but we should probably have
a lower default, e.g. 100,000.
With this limit, we can guard against the case where ZFS could run out of
memory when destroying large numbers of blocks in a single transaction
group, as the entire DDT needs to be brought into memory.
Illumos issue:
5138 add tunable for maximum number of blocks freed in one txg
projects / FreeBSD / FreeBSD.git / log