cxgbe(4): Completely ignore all top level interrupts that are not enabled.
The driver used to log any non-zero cause and when running with a single
line interrupt it would spam the console/logs with reports of interrupts
that are of no interest to anyone.
Provide protection against starvation of the ll/sc loops when accessing userpace.
Casueword(9) on ll/sc architectures must be prepared for userspace
constantly modifying the same cache line as containing the CAS word,
and not loop infinitely. Otherwise, rogue userspace livelocks the
kernel.
To fix the issue, change casueword(9) interface to return new value 1
indicating that either comparision or store failed, instead of relying
on the oldval == *oldvalp comparison. The primitive no longer retries
the operation if it failed spuriously. Modify callers of
casueword(9), all in kern_umtx.c, to handle retries, and react to
stops and requests to terminate between retries.
On x86, despite cmpxchg should not return spurious failures, we can
take advantage of the new interface and just return PSL.ZF.
Reviewed by: andrew (arm64, previous version), markj
Tested by: pho
Reported by: https://xenbits.xen.org/xsa/advisory-295.txt
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D20772
Scott Long [Fri, 12 Jul 2019 18:37:56 +0000 (18:37 +0000)]
Tie the name limit of a VM to SPECNAMELEN from devfs instead of a
hard-coded value. Don't allocate space for it from the kernel stack.
Account for prefix, suffix, and separator space in the name. This
takes the effective length up to 229 bytes on 13-current, and 37 bytes
on 12-stable. 37 bytes is enough to hold a full GUID string.
Correctly truncate the rule in case when it has several action opcodes.
It is possible, that opcode at the ACTION_PTR() location is not real
action, but action modificator like "log", "tag" etc. In this case we
need to check for each opcode in the loop to find O_EXTERNAL_ACTION.
Warner Losh [Fri, 12 Jul 2019 06:19:25 +0000 (06:19 +0000)]
Retire the -DRELEASE_CRUNCH define.
The RELEASE_CRUNCH ifdefs save about 100 bytes of text space. The
complexity is not worth it as they eliminate error messages.
Left the RELEASE_CRUNCH ifdef to eliminate a lot of stuff in place.
That saves an interesting amount of space and change some behaviors,
so absent a more detailed analysis, maintain the status quo.
Warner Losh [Fri, 12 Jul 2019 05:35:45 +0000 (05:35 +0000)]
Retire support for -DMINIMALISTIC
We've not used this in years since we retired sysinstall, and it
hasn't compiled in at least a year. A full camcontrol is only 180k, so
making it smaller is not as important as it once was.
Warner Losh [Fri, 12 Jul 2019 05:19:06 +0000 (05:19 +0000)]
There is no SMALLER define anymore here
Stop defining SMALLER. Since we replaced cpio with libarchive version,
there's no options to make it smaller. Also, the comment about the
FreeBSD installer is obsolete. Remove them both.
Warner Losh [Fri, 12 Jul 2019 04:44:50 +0000 (04:44 +0000)]
Remove unused defines since r147075
When the OpenBSD dhclient was brought in 14 years ago, we stopped
supporting building a reduced sized dhclient, yet retained the options
here. Also, the OpenBSD dhclient doesn't need lint defined, so it can
go too.
Move the new ipf_pcksum6() function from ip_fil_freebsd.c to fil.c.
The reason for this is that ipftest(8), which still works on FreeBSD-11,
fails to link to it, breaking stable/11 builds.
ipftest(8) was broken (segfault) sometime during the FreeBSD-12 cycle.
glebius@ suggested we disable building it until I can get around to
fixing it. Hence this was not caught in -current.
The intention is to fix ipftest(8) as it is used by the netbsd-tests
(imported by ngie@ many moons ago) for regression testing.
Summary:
efi loader does not work with static network parameters. It always uses
BOOTP/DHCP and also uses RARP as a fallback. Problems with DHCP servers can
cause the loader to fail to populate network parameters.
Submitted by: Siddharth Tuli <siddharthtuli_gmail.com>
Reviewed by: imp
Sponsored by: Juniper Networks, Inc.
Differential Revision: https://reviews.freebsd.org/D20811
Doug Moore [Thu, 11 Jul 2019 20:52:39 +0000 (20:52 +0000)]
Address problems in blist_alloc introduced in r349777. The swap block allocator could become corrupted
if a retry to allocate swap space, after a larger allocation attempt failed, allocated a smaller set of free blocks
that ended on a 32- or 64-block boundary.
Add tests to detect this kind of failure-to-extend-at-boundary and prevent the associated accounting screwup.
Ensure that mds_handler always points to a valid method.
Depending on system configuration, version, and architecture,
mds_handler might be dereferenced from doreti before
hw_mds_recalculate_boot() initialized it. Statically assign void
method to cover all cases.
Reported by: "Schuendehuette, Matthias (LDA IT PLM)" <matthias.schuendehuette@siemens.com>
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
Warner Losh [Thu, 11 Jul 2019 06:22:15 +0000 (06:22 +0000)]
More fully implement the state machine.
When a command is finished running, we must transition it from INQUEUE
to busy state. We were failing to do that, so we hit a panic when the
commands were freed. This only affects mpr, mps already did simmilar
things. Now both the polling and interrupt paths properly set BUSY as
appropriate.
powerpc: Only worry about the lower 32 bits of SP in a 32-bit process
Summary:
Running a 32-bit process on a 64-bit POWER CPU may still use all 64-bits
in calculations, while ignoring the upper 32 bits for addressing
storage. It so happens that some processes end up with r1 (SP) having
bit 31 set in some cases (33-bit address). Writing out to this 33-bit
address obviosly fails. Since the CPU ignores the upper bits, we should
as well.
sendsig() and cpu_fetch_syscall_args() appear to be the only functions
that actually rely on userspace register values for copy in/out, and
cpu_fetch_syscall_args() doesn't seem to be bitten in practice yet.
Alan Cox [Thu, 11 Jul 2019 02:43:23 +0000 (02:43 +0000)]
According to Section D5.10.3 "Maintenance requirements on changing System
register values" of the architecture manual, an isb instruction should be
executed after updating ttbr0_el1 and before invalidating the TLB. The
lack of this instruction in pmap_activate() appears to be the reason why
andrew@ and I have observed an unexpected TLB entry for an invalid PTE on
entry to pmap_enter_quick_locked(). Thus, we should now be able to revert
the workaround committed in r349442.
ipfilter commands, in this case ipf(8), passes its operations and rules
via an ioctl interface. Rules can be added or removed and stats and
counters can be zeroed out. As the ipfilter interprets these
instructions or operations they are stored in an integer called
addrem (add/remove). 1 is add, 2 is remove, and 3 is clear stats and
counters. Much of this is not documented. This commit documents these
operations by replacing simple integers with a self documenting
enum along with a few basic comments.
Warner Losh [Wed, 10 Jul 2019 22:23:59 +0000 (22:23 +0000)]
Enforce a 4GB DMA boundary on isci(4)
This device cannot cross a 4GB boundary with DMA. Removing the
boundary in r346386 resulted in low frequency memory corruption on
machines with isci(4) controllers.
Randall Stewart [Wed, 10 Jul 2019 20:40:39 +0000 (20:40 +0000)]
This commit updates rack to what is basically being used at NF as
well as sets in some of the groundwork for committing BBR. The
hpts system is updated as well as some other needed utilities
for the entrance of BBR. This is actually part 1 of 3 more
needed commits which will finally complete with BBRv1 being
added as a new tcp stack.
Sponsored by: Netflix Inc.
Differential Revision: https://reviews.freebsd.org/D20834
Ian Lepore [Wed, 10 Jul 2019 14:34:52 +0000 (14:34 +0000)]
De-pollute arm's sysarch.h.
Instead of including stdint.h for uintptr_t, include sys/_types.h and use
__types for everything that isn't a native C keyword type.
Remove the #include of cdefs.h. It appears after the include of armreg.h
which has a precondition of cdefs.h being included before it, so everyone
including sysarch.h is already including cdefs.h. (When armv5 support
goes away, there will be no need include armreg.h here either.)
Unfortunately, the unprefixed struct member names "addr" and "len" cannot
be changed, because 3rd-party software is relying on them (libcompiler_rt
is one known consumer).
Let linuxulator mprotect mask unsupported bits before calling kern_mprotect.
After r349240 kern_mprotect returns EINVAL for unsupported bits in the prot
argument. Linux rtld uses PROT_GROWSDOWN and PROT_GROWS_UP when marking the
stack executable. Mask these bits like kern_mprotect used to do. For other
unsupported bits EINVAL is returned like Linux does.
Apply a workaround to be able to build clang 8.0.0 headers with clang
3.4.1, which is still in the stable/10 branch.
It looks like clang 3.4.1 implements static_asserts by instantiating a
temporary static object, and if those are in an anonymous union, it
results in "error: anonymous union can only contain non-static data
members".
To work around this implementation limitation, move the static_asserts
in question out of the anonymous unions.
This should make building the latest stable/11 from stable/10 possible
again.
Reported by: Mike Tancsa <mike@sentex.net>
MFC after: 3 days
Alan Cox [Tue, 9 Jul 2019 20:28:53 +0000 (20:28 +0000)]
Introduce pmap_clear(), which zeroes a page table entry, and use it, instead
of pmap_load_clear(), in places where we don't care about the page table
entry's prior contents.
Eliminate an unnecessary pmap_load() from pmap_remove_all(). Instead, use
the value returned by the pmap_load_clear() on the very next line. (In the
future, when we support "hardware dirty bit management", using the value
from the pmap_load() rather than the pmap_load_clear() would have actually
been an error because the dirty bit could potentially change between the
pmap_load() and the pmap_load_clear().)
A KASSERT() in pmap_enter(), which originated in the amd64 pmap, was meant
to check the value returned by the pmap_load_clear() on the previous line.
However, we were ignoring the value returned by the pmap_load_clear(), and
so the KASSERT() was not serving its intended purpose. Use the value
returned by the pmap_load_clear() in the KASSERT().
Ian Lepore [Mon, 8 Jul 2019 20:26:56 +0000 (20:26 +0000)]
Restore the ability for i2c slave devices to do IO from their probe method.
r348164 added code to iicbus_request_bus/iicbus_release_bus to automatically
call device_busy()/device_unbusy() as part of aquiring exclusive use of the
bus (so modules can't be unloaded while the bus is exclusively owned and/or
IO is in progress). That broke the ability to do i2c IO from a slave device
probe method, because the slave isn't attached yet, so calling device_busy()
triggers a sanity-check panic for trying to busy a non-attached device.
Now we check whether the device status is < DS_ATTACHING, and if so we busy
the iicbus rather than the slave device. I think this leaves a small window
where a module could be unloaded while probing is in progress. But I think
that's true of all devices, and probably should be fixed by introducing a
DS_PROBING state for devices, and handling that at various points in the
newbus code.
Warner Losh [Mon, 8 Jul 2019 20:20:01 +0000 (20:20 +0000)]
Fix bugs in recovery path and improve cm tracking
Eliminate the TIMEDOUT state. This state really conveyed two different
concepts: I timed out during recovery (and my command got put on the
recovery queue), and I timed out diring discovery (which doesn't).
Separate those two concepts into two flags. Use the TIMEDOUT flag to
fail requests as timed out. Use the on queue flag to remove them from
the queue.
In mps_intr_locked for MPI2_RPY_DESCRIPT_FLAGS_ADDRESS_REPLY message
type, when completing commands, ignore the ones that are not in state
INQUEUE. They were already completed as part of the recovery
process. When we complete them twice, we wind up with entries on the
free queue that are marked as busy, trigging asserts.
Reviewed by: scottl (earlier version, just for mpr)
Differential Revision: https://reviews.freebsd.org/D20785
Mark Johnston [Mon, 8 Jul 2019 19:46:20 +0000 (19:46 +0000)]
Merge the vm_page hold and wire mechanisms.
The hold_count and wire_count fields of struct vm_page are separate
reference counters with similar semantics. The remaining essential
differences are that holds are not counted as a reference with respect
to LRU, and holds have an implicit free-on-last unhold semantic whereas
vm_page_unwire() callers must explicitly determine whether to free the
page once the last reference to the page is released.
This change removes the KPIs which directly manipulate hold_count.
Functions such as vm_fault_quick_hold_pages() now return wired pages
instead. Since r328977 the overhead of maintaining LRU for wired pages
is lower, and in many cases vm_fault_quick_hold_pages() callers would
swap holds for wirings on the returned pages anyway, so with this change
we remove a number of page lock acquisitions.
No functional change is intended. __FreeBSD_version is bumped.
Warner Losh [Mon, 8 Jul 2019 19:38:49 +0000 (19:38 +0000)]
Work around devices which return all zeros for reads of existing MSI-X
table VCTRL registers.
Unconditionally program the MSI-X vector control Mask field for MSI-X
table entries without regarud for Mask's previous value. Some devices
return all zeros on reads of the VCTRL registers, which would cause us
to skip disabling interrupts. This fixes the Samsung SM961/PM961 SSDs
which are return zero starting from offset 0x3084 within the memory
region specified by BAR0, even when they are active MSI-X vectors.
The Illumos kernel writes these unconditionally to 0 or 1. However,
section 6.8.2.9 of the PCI Local Bus 3.0 spec (dated Feb 3, 2004)
states for bits 31::01:
After reset, the state of these bits must be 0. However, for
potential future use, software must preserve the value of
these reserved bits when modifying the value of other Vector
Control bits. If software modifies the value of these reserved
bits, the result is undefined."
so we always set or clear the Mask bit, but otherwise preserves the
old value.
PR: https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=211713
Reviewed By: imp, jhb
Submitted by: Ka Ho Ng
MFC After: 1 week
Differential Revision: https://reviews.freebsd.org/D20873
Minor code cleanup of USB ACPI code after r349161.
While at it fix an invalid memory access issue when attaching external
USB HUBs, which are not mapped by ACPI, due to missing status check
when calling AcpiGetObjectInfo() from acpi_usb_hub_port_probe_cb().
Mark Johnston [Mon, 8 Jul 2019 19:02:40 +0000 (19:02 +0000)]
Elide the vm_reserv_free_page() call when PG_PCPU_CACHE is set.
Pages with PG_PCPU_CACHE set cannot have been allocated from a
reservation, so as an optimization, skip the call to
vm_reserv_free_page() in this case. Otherwise, the access of
the corresponding reservation structure often results in a cache
miss.
Eric van Gyzen [Mon, 8 Jul 2019 13:46:26 +0000 (13:46 +0000)]
Ignore kern.vt.splash_cpu without graphics
When the system has no graphical console, such as bhyve in common
configurations, ignore kern.vt.splash_cpu, instead of panicking
on INVARIANTS kernels.
Although PPC SLB code doesn't handle allocation failures,
which are rare, in most places it asserts that the pointer
returned by uma_zalloc() is not NULL, making it easier to
identify the failure and avoiding an invalid pointer dereference.
This change simply adds a missing KASSERT in SLB code.
Ian Lepore [Sun, 7 Jul 2019 17:15:45 +0000 (17:15 +0000)]
Eliminate spurious periodic.daily error message for rotating accounting log.
In 2011, r218961 removed local code for rotating logs in favor of using the
rotate_log command in etc/rc.d/accounting. If the accounting service is
activated then subsequently de-activated in rc.conf but still remains active
in periodic.conf, then you get an error message every day in the periodic
jobs about being unable to rotate the logs.
With this change to use "onerotate_log", the log rotation will happen the
first time periodic daily runs after accounting was disabled but periodic
accounting was left enabled. After that happens once, the /var/account/acct
will no longer exist, which results in a different path through the periodic
code and no more error messages will appear (unless daily_show_badconfig is
set, in which case the admin will be told that periodic security processing
is enabled but the accounting file is not present).
This is only a partial fix for the problems reported in PR 202203.
Bhyve can currently emulate two virtual NICs, namely virtio-net and e1000,
and connect to the host network through two backends, namely tap and netmap.
However, there is no interface between virtual NIC functionalities and
backend functionalities. As a result, the backend code is duplicated between
the two virtual NIC implementations and also within the same virtual NIC.
Also, e1000 cannot currently use netmap as a backend.
This patch introduces a network backend API between virtio-net/e1000 and
tap/netmap, to improve code reuse and add missing functionalities.
Virtual NICs and backends can negotiate virtio-net features, such as checksum
offload and TSO. If the backend supports the features, it will propagate this
information to the guest, so that the latter can make use of them. Currently,
only netmap VALE ports support the features, but support should be added to
tap in the future.
Add additional check for 'blocks per group' and 'fragments per group' superblock fields.
These fields will not be equal only in case if bigalloc filesystem feature is turned on.
This feature is not supported for now.
Reported by: Christopher Krah, Thomas Barabosch, and Jan-Niclas Hilgert of Fraunhofer FKIE
Reported as: FS-27-EXT2-12: Denial of Service in openat-0 (vm_fault_hold/ext2_clusteracct)
The ext2fs fragments are different from ufs fragments.
In case of ext2fs the fragment should be equal or more then block size.
The values more than block size are used only in case of bigalloc feature, which is does not supported for now.
Reported by: Christopher Krah, Thomas Barabosch, and Jan-Niclas Hilgert of Fraunhofer FKIE
Reported as: FS-22-EXT2-9: Denial of service in ftruncate-0 (ext2_balloc)
Reported by: Christopher Krah, Thomas Barabosch, and Jan-Niclas Hilgert of Fraunhofer FKIE
Reported as: FS-11-EXT2-6: Denial Of Service in write-1 (ext2_balloc)
Alan Cox [Sun, 7 Jul 2019 06:06:48 +0000 (06:06 +0000)]
Three changes to pmap_enter():
1. Use _pmap_alloc_l3() instead of pmap_alloc_l3() in order to handle the
possibility that a superpage mapping for "va" was created while we slept.
(This is derived from the amd64 version.)
2. Eliminate code for allocating kernel page table pages. Kernel page
table pages are preallocated by pmap_growkernel().
3. Eliminate duplicated unlock operations when KERN_RESOURCE_SHORTAGE is
returned.
Take part of the text from POSIX 2018 edition and describe the
atomicity requirements for read and write syscalls. See p1003.1-2018,
Vol.2, 2.9.7 Threads interaction with Regular File Operations.
Reviewed by: asomers
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
Differential revision: https://reviews.freebsd.org/D20867
Upgrade our copies of clang, llvm, lld, lldb, compiler-rt, libc++,
libunwind and openmp to the upstream release_80 branch r364487
(effectively, 8.0.1 rc3). The 8.0.1 release will most likely
have no further changes.