Adrian Chadd [Wed, 8 Feb 2017 06:50:59 +0000 (06:50 +0000)]
[iwm] Use iwm_mvm_scan_stop_wait to properly abort scans.
* Add IWM_FLAG_SCAN_RUNNING to sc->sc_flags to track whether the firmware
is currently running a scan, in order to decide wheter iwm_scan_end
needs to abort a running scan.
* In iwm_scan_end, if the scan is still running, we now abort it, in order
to keep the firmware scanning state in sync.
* Try to make things a bit simpler, by reacting on the
IWM_SCAN_OFFLOAD_COMPLETE and IWM_SCAN_COMPLETE_UMAC notifications,
instead of IWM_SCAN_ITERATION_COMPLETE and
IWM_SCAN_ITERATION_COMPLETE_UMAC. This should be fine since we always
only tell the firmware to do a single scan iteration anyway.
John Baldwin [Tue, 7 Feb 2017 20:34:03 +0000 (20:34 +0000)]
Copy the e_machine and e_flags fields from the binary into an ELF core dump.
In the kernel, cache the machine and flags fields from ELF header to use in
the ELF header of a core dump. For gcore, the copy these fields over from
the ELF header in the binary.
This matters for platforms which encode ABI information in the flags field
(such as o32 vs n32 on MIPS).
Enji Cooper [Tue, 7 Feb 2017 19:47:04 +0000 (19:47 +0000)]
Remove placeholder compat header for stdio.h
In the end, dealing with fparseln was more bikeshed worthy than I
anticipated, and polling stdio.h with libutil.h caused me more
grief than necessary. Keeping the compat header around for no
reason other than include_next'ing the stdio.h header in FreeBSD
makes no sense.
Enji Cooper [Tue, 7 Feb 2017 19:42:41 +0000 (19:42 +0000)]
Improve libnetbsd compatibility with NetBSD
This change is being made to diff reduce/reduce duplication in
contrib/netbsd-tests and to facilitate further porting of software from
NetBSD
Add the following headers:
- sys/event.h:
-- sys/types.h is required for kqueue on FreeBSD, but not NetBSD.
- sys/types.h:
-- NBBY is defined in sys/param.h on FreeBSD, not sys/types.h like on NetBSD.
Pull in sys/param.h to have parity with NetBSD.
- sys/wait.h:
-- Define wrusage as __wrusage for parity with NetBSD typedef.
- glob.h
-- Define __gl_stat_t as "struct stat" for parity with NetBSD typedef.
- pthread.h:
-- Pull in pthread_np.h for _np functions defined separately on FreeBSD.
Improve compatibility with NetBSD in the following headers:
- sha1.h:
-- define SHA1_CTX as SHA_CTX
-- define SHA1Final as SHA1_Final
- sha2.h:
-- #include sha384 to pick up all of the SHA 384 bit macros and definitions.
- util.h:
-- Add sys/types.h to util.h to pollute the header for types used in
flags_to_string and string_to_flags (u_long) as NetBSD doesn't require them
for the functions.
Eric van Gyzen [Tue, 7 Feb 2017 18:57:57 +0000 (18:57 +0000)]
Fix garbage IP addresses in UDP log_in_vain messages
If multiple threads emit a UDP log_in_vain message concurrently,
the IP addresses could be garbage due to concurrent usage of a
single string buffer inside inet_ntoa(). Use inet_ntoa_r() with
two stack buffers instead.
Reported by: Mark Martinec <Mark.Martinec+freebsd@ijs.si>
MFC after: 3 days
Relnotes: yes
Sponsored by: Dell EMC
Enji Cooper [Tue, 7 Feb 2017 18:57:52 +0000 (18:57 +0000)]
Expect the t_precision long double checks to fail on FreeBSD/i386
There are some potential issues with the test (as brd@ has pointed out
elsewhere) with precision, etc not being set before the test, but as
always, more research is required.
Enji Cooper [Tue, 7 Feb 2017 18:37:46 +0000 (18:37 +0000)]
Apply r274475's to expr.oxout.tab.c to fix the test on FreeBSD
YYINT on FreeBSD is int, not short
I'll work with the upstream maintainer or come up with a build
method of modifying their definitions on install instead of
having to modify tests to match our forked YYINT definition.
Mateusz Guzik [Tue, 7 Feb 2017 14:49:36 +0000 (14:49 +0000)]
locks: change backoff to exponential
Previous implementation would use a random factor to spread readers and
reduce chances of starvation. This visibly reduces effectiveness of the
mechanism.
Switch to the more traditional exponential variant. Try to limit starvation
by imposing an upper limit of spins after which spinning is half of what
other threads get. Note the mechanism is turned off by default.
Enji Cooper [Tue, 7 Feb 2017 05:39:00 +0000 (05:39 +0000)]
Expect :int_within_limits to fail when ptrdiff_t/*intmax_t differ in base type
The %t{d,u} (ptrdiff_t) tests fail for the following reasons:
- ptrdiff_t is by definition int32_t on !LP64 architectures and int64_t on
LP64 architectures.
- intmax_t is by definition fixed to int64_t on all architectures.
- Some of the code in lib/libc/stdio/... is promoting ptrdiff_t to *intmax_t
when parsing/representing the value.
Enji Cooper [Tue, 7 Feb 2017 04:25:21 +0000 (04:25 +0000)]
Wrap strcmp/wcscmp calls with ATF_CHECK_MSG and drop atf_tc_fail use
The reasoning here was the same as what was done in r313376:
- Gather as many results as possible instead of failing early and
not testing the rest of the cases.
- Simplify logic when checking test inputs vs outputs and printing
test result.
Enji Cooper [Tue, 7 Feb 2017 03:46:48 +0000 (03:46 +0000)]
Fix :hexadecimal_floating_point on i386
Don't exclude i386 from LDBL_MANT_DIG == 64; it works properly in
that case.
While here, replace strcmp + atf_tc_fail with ATF_CHECK_MSG for 2
reasons:
- Gather as many results as possible instead of failing early and
not testing the rest of the cases.
- Simplify logic when checking test inputs vs outputs and printing
test result.
Enji Cooper [Tue, 7 Feb 2017 02:57:11 +0000 (02:57 +0000)]
Expect :hsearch_r_nonexistent to fail on FreeBSD
The docs and the behavior mismatch; as noted in the bug, the behavior
for hsearch_r matches Linux, whereas the docs seem to match NetBSD
requirements wise.
Enji Cooper [Tue, 7 Feb 2017 02:32:49 +0000 (02:32 +0000)]
hcreate(3): fix the ERRORS section and bump .Dd
- Add missing comma between functions that trigger ENOMEM error.
- Fix the description for ESRCH. The action that triggers this error is
FIND, not SEARCH (SEARCH does not exist).
Add kern_vm_mmap2(), kern_vm_mprotect(), kern_vm_msync(), kern_vm_munlock(),
kern_vm_munmap(), and kern_vm_madvise(), and use them in various compats
instead of their sys_*() counterparts.
Make root_mount_hold() work after boot. This is important for two
reasons. First is rerooting into USB-mounted device that happens
to be not yet enumerated. The second is when mounting with (non-root)
filesystem on USB device on a hub that's enumerated later than the root
mount: the rc scripts explicitly mount for the root mount holds to be
released, but each USB bus takes the hold asynchronously, and if that
happens after root mount, it would just get ignored.
In r290196 the root mount hold mechanism was changed to make it not wait
for mount hold release if the root device already exists. So, unless your
rootdev is not on USB - ie in the usual case - the root mount won't wait
for USB. However, the old behaviour was sometimes used as "wait until USB
is fully enumerated", and r290196 broke that.
This commit adds vfs.root_mount_always_wait tunable, to force the kernel
to always wait for root mount holds, even if the root is already there.
Toomas Soome [Mon, 6 Feb 2017 18:29:43 +0000 (18:29 +0000)]
loader: biosdisk fix for 2+TB disks
This fix is implementing partition based boundary check for
disk IO and updates disk mediasize (if needed), based on information
from partition table.
As it appeared, the signed int based approach still has corner cases,
and the wrapover based behavior is non-standard.
The idea for this fix is based on two assumptions:
The bug about media size is hitting large (2+TB) disks, lesser disks
hopefully, are not affected.
Large disks are using GPT (which does include information about disk size).
Since our concern is about boot support and boot disks are partitioned,
implementing partition boundaries based IO verification should make the
media size issues mostly disappear.
However, for large disk case, we do have the disk size available from GPT table.
If non-GPT cases will appear, we still can make approximate calculation about
disk size based on defined partition(s), however, this is not the objective
of this patch, and can be added later if there is any need.
This patch does implement disk media size adjustment (if needed) in bd_open(),
and boundary check in bd_realstrategy().
Navdeep Parhar [Mon, 6 Feb 2017 17:48:25 +0000 (17:48 +0000)]
cxgbe/t4_tom: Fix CLIP entry refcounting on the passive side. Every
IPv6 connection being handled by the TOE should have a reference on its
CLIP entry.
On arm64 use atomics. Then, both arm and arm64 do not need a critical
section around update. Replace all cpus loop by CPU_FOREACH().
This brings arm and arm64 counter(9) implementation closer to current
amd64, but being more RISC-y, arm* version cannot avoid atomics.
Reported by: Alexandre Martins <alexandre.martins@stormshield.eu>
Reviewed by: andrew
Tested by: Alexandre Martins, andrew
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
identify_arm_cpu() in sys/arm/arm/identcpu-v4.c incorrectly uses a
u_int8_t variable to store the result of cpu_get_control().
It should really use a u_int variable, the same way as done for cpu_ident()
in the same function, as both cpuid and control registers are 32-bit..
This issue causes users of identcpu-v4 to incorrectly report things such as
icache status (bit 12 in cpu control register) and basically anything
defined in bits above bit 7 :-)
Reviewed by: manu
Sponsored by: Smartcom - Bulgaria AD
Differential Revision: https://reviews.freebsd.org/D9460
Andrew Turner [Mon, 6 Feb 2017 13:08:48 +0000 (13:08 +0000)]
Only allow the pic type to be either a PIC or MSI type. All interrupt
controller drivers handle either MSI/MSI-X interrupts, or regular
interrupts, as such enforce this in the interrupt handling framework.
If a later driver was to handle both it would need to create one of each.
This will allow future changes to allow the xref space to overlap, but
refer to different drivers.
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
X-Differential Revision: https://reviews.freebsd.org/D8616
Mateusz Guzik [Mon, 6 Feb 2017 09:40:14 +0000 (09:40 +0000)]
locks: fix recursion support after recent changes
When a relevant lockstat probe is enabled the fallback primitive is called with
a constant signifying a free lock. This works fine for typical cases but breaks
with recursion, since it checks if the passed value is that of the executing
thread.
Toomas Soome [Mon, 6 Feb 2017 08:58:40 +0000 (08:58 +0000)]
loader: bcache read ahead block count should take account the large sectors
The loader bcache is implementing simple read-ahead to boost the cache.
The bcache is built based on 512B block sizes, and the read ahead is attempting
to read number of cache blocks, based on amount of the free bcache space.
However, there are devices using larger sector sizes than 512B, most obviously
the CD media is based on 2k sectors. This means the read-ahead can not be just
random number of blocks, but we should use value suitable also for use with
larger sectors, as for example, with CD devices, we should read multiple of 2KB.
Since the sector size from disk interface is not too reliable, i guess we can
just use "good enough" value, so the implementation is rounding down the read
ahead block count to be multiple of 16.
This means we have covered sector sizes to 8k.
In addition, the update does implement the end of cache marker, to help to
detect the possible memory corruption - I have not seen it happening so far,
but it does not hurt to have the detection mechanism in place.
o Almost all IPsec releated code was moved into sys/netipsec.
o New kernel modules added: ipsec.ko and tcpmd5.ko. New kernel
option IPSEC_SUPPORT added. It enables support for loading
and unloading of ipsec.ko and tcpmd5.ko kernel modules.
o IPSEC_NAT_T option was removed. Now NAT-T support is enabled by
default. The UDP_ENCAP_ESPINUDP_NON_IKE encapsulation type
support was removed. Added TCP/UDP checksum handling for
inbound packets that were decapsulated by transport mode SAs.
setkey(8) modified to show run-time NAT-T configuration of SA.
o New network pseudo interface if_ipsec(4) added. For now it is
build as part of ipsec.ko module (or with IPSEC kernel).
It implements IPsec virtual tunnels to create route-based VPNs.
o The network stack now invokes IPsec functions using special
methods. The only one header file <netipsec/ipsec_support.h>
should be included to declare all the needed things to work
with IPsec.
o All IPsec protocols handlers (ESP/AH/IPCOMP protosw) were removed.
Now these protocols are handled directly via IPsec methods.
o TCP_SIGNATURE support was reworked to be more close to RFC.
o PF_KEY SADB was reworked:
- now all security associations stored in the single SPI namespace,
and all SAs MUST have unique SPI.
- several hash tables added to speed up lookups in SADB.
- SADB now uses rmlock to protect access, and concurrent threads
can do SA lookups in the same time.
- many PF_KEY message handlers were reworked to reflect changes
in SADB.
- SADB_UPDATE message was extended to support new PF_KEY headers:
SADB_X_EXT_NEW_ADDRESS_SRC and SADB_X_EXT_NEW_ADDRESS_DST. They
can be used by IKE daemon to change SA addresses.
o ipsecrequest and secpolicy structures were cardinally changed to
avoid locking protection for ipsecrequest. Now we support
only limited number (4) of bundled SAs, but they are supported
for both INET and INET6.
o INPCB security policy cache was introduced. Each PCB now caches
used security policies to avoid SP lookup for each packet.
o For inbound security policies added the mode, when the kernel does
check for full history of applied IPsec transforms.
o References counting rules for security policies and security
associations were changed. The proper SA locking added into xform
code.
o xform code was also changed. Now it is possible to unregister xforms.
tdb_xxx structures were changed and renamed to reflect changes in
SADB/SPDB, and changed rules for locking and refcounting.
Toomas Soome [Mon, 6 Feb 2017 08:26:45 +0000 (08:26 +0000)]
loader: Implement disk_ioctl() to support DIOCGSECTORSIZE and DIOCGMEDIASIZE.
Need interface to extract information about disk abstraction,
to read disk or partition size depending on the provided argument
and adjust disk size based on information in partition table.
The disk handle from disk_open() has d_offset field to point to
partition start. So we can use this fact to return either whole disk
size or partition size. For this we only need to record partition size
we get from disk_open() anyhow.
In addition, this will also make it possible to adjust the disk media size
based on information from partition table. The problem with disk size is
about some BIOS systems reporting bogus disk size for 2+TB disks, but
since such disks are using GPT partitioning, and GPT does have information
about disk size (alternate LBA + 1), we can use this fact to record disk
size based on partition table.
This patch does exactly this: implements DIOCGSECTORSIZE and DIOCGMEDIASIZE
ioctl, and DIOCGMEDIASIZE will report either disk media size or partition size.
Adds ptable_getsize() call to read partition size in bytes from ptable pointer.
Updates disk_open() to use ptable_getsize() to update mediasize value.
Implements GPT detection function to update ptable size (used by
ptable_getsize()) according to alternate lba (which is location of backup copy
of GPT header table).
Warner Losh [Mon, 6 Feb 2017 06:15:38 +0000 (06:15 +0000)]
o Add mkimg to the cross tools, and use the TMPPATH as PATH to pick up
mkimg for building on systems like FreeBSD 11.0 that don't have my
-a changes.
o Set NANO_ROOT and NANO_ALTROOT for std-* since their values don't
change when we set NANO_SLICE*.
Navdeep Parhar [Mon, 6 Feb 2017 05:19:29 +0000 (05:19 +0000)]
cxgbe(4): Allow tunables that control the number of queues to be set to
'-n' to tell the driver to create _up to_ 'n' queues if enough cores are
available. For example, setting hw.cxgbe.nrxq10g="-32" will result in
16 queues if the system has 16 cores, 32 if it has 32.
There is no change in the default number of queues of any type.
Adrian Chadd [Mon, 6 Feb 2017 05:03:41 +0000 (05:03 +0000)]
[iwm] Sync valid_tx_ant and valid_rx_ant mask handling with iwlwifi.
* This fixes the phy_cfg field sent in the iwm_send_phy_cfg_cmd()
command, which wasn't taking into account the valid_rx_ant and
valid_tx_ant masks from nvm_data before.
Ian Lepore [Sun, 5 Feb 2017 15:45:31 +0000 (15:45 +0000)]
Add tsw_busy support to usb_serial (ucom).
The tty layer uses tsw_busy to poll for busy/idle status of the transmitter
hardware during close() and tcdrain(). The ucom layer defines ULSR_TXRDY and
ULSR_TSRE bits for the line status register; when both are set, the
transmitter is idle. Not all chip drivers maintain those bits in the sc_lsr
field, and if the bits never get set the transmitter will always appear
busy, causing hangs in tcdrain().
These changes add a new sc_flag bit, UCOM_FLAG_LSRTXIDLE. When this flag is
set, ucom_busy() uses the lsr bits to return busy vs. idle state, otherwise
it always returns idle (which is effectively what happened before this
change because tsw_busy wasn't implemented).
For the uftdi chip driver, these changes stop masking out the tx idle bits
when processing the status register (because now they're useful), and it
calls ucom_use_lsr_txbits() to indicate the bits are maintained by the
driver and can be used by ucom_busy().