bz [Thu, 27 Nov 2008 13:19:42 +0000 (13:19 +0000)]
Replace most INP_CHECK_SOCKAF() uses checking if it is an
IPv6 socket by comparing a constant inp vflag.
This is expected to help to reduce extra locking.
bz [Thu, 27 Nov 2008 12:04:35 +0000 (12:04 +0000)]
Merge in6_pcbfree() into in_pcbfree() which after the previous
IPsec change in r185366 only differed in two additonal IPv6 lines.
Rather than splattering conditional code everywhere add the v6
check centrally at this single place.
Reviewed by: rwatson (as part of a larger changset)
MFC after: 6 weeks (*)
(*) possibly need to leave a stub wrapper in 7 to keep the symbol.
kib [Thu, 27 Nov 2008 11:27:59 +0000 (11:27 +0000)]
Add two rtld exported symbols, _rtld_atfork_pre and _rtld_atfork_post.
Threading library calls _pre before the fork, allowing the rtld to
lock itself to ensure that other threads of the process are out of
dynamic linker. _post releases the locks.
This allows the rtld to have consistent state in the child. Although
child may legitimately call only async-safe functions, the call may
need plt relocation resolution, and this requires working rtld.
Reported and debugging help by: rink
Reviewed by: kan, davidxu
MFC after: 1 month (anyway, not before 7.1 is out)
bz [Thu, 27 Nov 2008 10:43:08 +0000 (10:43 +0000)]
Unify ipsec[46]_delete_pcbpolicy in ipsec_delete_pcbpolicy.
Ignoring different names because of macros (in6pcb, in6p_sp) and
inp vs. in6p variable name both functions were entirely identical.
Reviewed by: rwatson (as part of a larger changeset)
MFC after: 6 weeks (*)
(*) possibly need to leave a stub wrappers in 7 to keep the symbols.
jkoshy [Thu, 27 Nov 2008 09:00:47 +0000 (09:00 +0000)]
- Add support for PMCs in Intel CPUs of Family 6, model 0xE (Core Solo
and Core Duo), models 0xF (Core2), model 0x17 (Core2Extreme) and
model 0x1C (Atom).
In these CPUs, the actual numbers, kinds and widths of PMCs present
need to queried at run time. Support for specific "architectural"
events also needs to be queried at run time.
Model 0xE CPUs support programmable PMCs, subsequent CPUs
additionally support "fixed-function" counters.
- Use event names that are close to vendor documentation, taking in
account that:
- events with identical semantics on two or more CPUs in this family
can have differing names in vendor documentation,
- identical vendor event names may map to differing events across
CPUs,
- each type of CPU supports a different subset of measurable
events.
Fixed-function and programmable counters both use the same vendor
names for events. The use of a class name prefix ("iaf-" or
"iap-" respectively) permits these to be distinguished.
- In libpmc, refactor pmc_name_of_event() into a public interface
and an internal helper function, for use by log handling code.
- Minor code tweaks: staticize a global, freshen a few comments.
kientzle [Thu, 27 Nov 2008 05:49:52 +0000 (05:49 +0000)]
After visiting a subdirectory, we use chdir("..") or
fchdir() to return back to the parent. If those fail,
we're just dead in the water. Add a new error value
TREE_ERROR_FATAL to indicate that directory traversal
cannot continue. Have write.c honor that by exiting
immediately.
kientzle [Thu, 27 Nov 2008 05:14:36 +0000 (05:14 +0000)]
If we're unable to chdir() to a directory that we know exists,
that should result in a non-zero return value.
In particular, this should address the issue that David Wolfskill
ran into with a somewhat flaky NFS mount resulting in a damaged
archive even though tar returned success.
jfv [Thu, 27 Nov 2008 02:18:43 +0000 (02:18 +0000)]
Thanks to the reminder from Ganbold, small fix in the RX failure
path for an infinite loop. Problem originally noticed in ixgbe
by Jeff Roberson and fixed there. Thanks to everyone involved.
yongari [Thu, 27 Nov 2008 01:57:23 +0000 (01:57 +0000)]
Add basic WOL support for 82550/82551/82558 and 82559 based
controllers. ICH based controllers are treated as 82559. 82557,
earlier revision of 82558 and 82559ER have no WOL capability.
o WOL support requires help of a firmware so add check whether
hardware is capable of handling magic frames by reading EEPROM.
o Enable accepting WOL frames only when hardware is about to
suspend or shutdown. Previously fxp(4) used to allow receipt of
magic frame under normal operation mode which could cause
hardware hang if magic frame is received by hardware. Datasheet
clearly states driver should not allow WOL frames under normal
operation mode.
o Disable WOL frame reception in device attach so have fxp(4)
immunize against system hang which can be triggered by magic
packets when the hardware is not in fully initialized state.
o Don't reset all hardware configuration data in fxp_stop()
otherwise important configuration data is lost and this would
reset WOL configuration to default state which in turn cause
hardware hang on receipt of magic frames. To fix the issue,
preserve hardware configuration data by issuing a selective
reset.
o Explicitly disable interrupts after issuing selective reset as
reset may unmask interrupts.
jfv [Wed, 26 Nov 2008 23:57:23 +0000 (23:57 +0000)]
This delta is primarily a fix for es2lan devices that
will sometimes fail to initialize problem due to a lock
contention with management hardware. However, in order to
deliver that fix it was necessary to take a shared code
update as a whole, and this required scattered changes in
the core code to be compatible.
The em driver now has VLAN HW support added as the igb
driver had previously.
jfv [Wed, 26 Nov 2008 23:41:18 +0000 (23:41 +0000)]
Updated ixgbe driver - version 1.6.2
-This version has header split, and as a result a number of
aspects of the code have been improved/simplified.
- Interrupt handling refined for performance
- Many small bugs fixed along the way
zec [Wed, 26 Nov 2008 22:32:07 +0000 (22:32 +0000)]
Merge more of currently non-functional (i.e. resolving to
whitespace) macros from p4/vimage branch.
Do a better job at enclosing all instantiations of globals
scheduled for virtualization in #ifdef VIMAGE_GLOBALS blocks.
De-virtualize and mark as const saorder_state_alive and
saorder_state_any arrays from ipsec code, given that they are never
updated at runtime, so virtualizing them would be pointless.
Reviewed by: bz, julian
Approved by: julian (mentor)
Obtained from: //depot/projects/vimage-commit2/...
X-MFC after: never
Sponsored by: NLnet Foundation, The FreeBSD Foundation
attilio [Wed, 26 Nov 2008 21:44:57 +0000 (21:44 +0000)]
Import an initial revision of the pmcannotate tool.
For further explanations please check this e-mail on freebsd-arch@:
http://lists.freebsd.org/pipermail/freebsd-arch/2008-November/008698.html
luigi [Wed, 26 Nov 2008 21:38:43 +0000 (21:38 +0000)]
Fix a typo in previous commit: must call "putn" to print a crlf,
instead of "puts" which prints whatever is at %si, followed by a CRLF.
It was not noticed during tests because at that point %si points
to a partition entry whose first byte is 0x80, which is both a
terminator for the string and a non printable character.
luigi [Wed, 26 Nov 2008 21:05:03 +0000 (21:05 +0000)]
Create a fake geometry (16 heads, 64 sectors) when dealing with
a plain file and a geometry is not explicitly supplied through
command line or disktab entry.
This way you can a FAT image on a file as simply as this:
luigi [Wed, 26 Nov 2008 18:01:21 +0000 (18:01 +0000)]
Pass the pointer to the selected partition in %si to the next stage
boot code. The bug was introduced in rev.1.13, and went unnoticed
because FreeBSD's boot1 does not use it, but other systems might.
(I have been struggling for almost a full day trying to figure out
why a syslinux'ed partition would not boot when started with the
FreeBSD /boot/boot0, only to realize that the bug was ours!)
The space for the two extra bytes (push %si and pop %si) is reclaimed
by removing an extra CRLF that is printed before booting.
The bug is not a major one but if there is time it might be a good
thing to merge it into the upcoming releases.
n_hibma [Wed, 26 Nov 2008 17:16:54 +0000 (17:16 +0000)]
- Add the device ID for the HP HS2300 MC8775 clone (michael)
- Bugfix: Don't excede static number of ports allowed when iterating
over endpoints within an interface.
- u3g_speeds contains speeds in baud, not bytes per second, so divide
the buffer size by 10.
sobomax [Wed, 26 Nov 2008 09:46:35 +0000 (09:46 +0000)]
Add Pentium D cores into the list that can't handle 12.5% and 25%
throttle. My SMP kernel hangs when one of those is selected by
powerd. Errata AA21 here:
yongari [Wed, 26 Nov 2008 07:36:17 +0000 (07:36 +0000)]
Implement TSO for 82550/82551 controllers.
o Configure controller to use dynamic TBD as TSO requires that
operation mode.
o Add a dummy TBD to tx_cb_u as TSO can access one more TBD in TSO
operation.
o Increase a DMA segment size to 4096 to hold a full IP segment
with link layer header.
o Unlike other TSO capable controllers, 82550/82551 does not
modify the first IP packet in TSO operation so driver should
create an IP packet with proper header. Subsequent IP packets
are generated from the header information in the first IP packet
header. Likewise pseudo checksum also should be computed by
driver for the first packet.
o TSO requires one more TBD to hold total TCP payload. To make
code simple for TSO/non-TSO case, increase the index of the
first available TBD array.
o Remove KASSERT that checks the size of a DMA segment should be
less than or equal to MCLBYTES as it's no longer valid in TSO.
o Tx threshold and number of TBDs field is used to store MSS in
TSO. So don't set the Tx threshold in TSO case.
yongari [Wed, 26 Nov 2008 06:36:53 +0000 (06:36 +0000)]
Implement Rx checksum offload for 82559 or later controllers.
82559 or later controllers added simple checksum calculation logic
in RU. For backward compatibility the computed checksum is appended
at the end of the data posted to Rx buffer. This type of simple
checksum calculation support had been used on several vendors such
as Sun HME/GEM, SysKonnect GENESIS and Marvell Yukon controllers.
Because this type of checksum offload support requires parsing of
received frame and pseudo checksum calculation with software
routine it still consumes more CPU cycles than that of full-fledged
checksum offload controller. But it's still better than software
checksum calculation.
yongari [Wed, 26 Nov 2008 05:51:49 +0000 (05:51 +0000)]
o Introduce a new function, fxp_new_rfabuf which allocates a new
Rx buffer and loads DMA map. Also add a function
fxp_discard_rfabuf that handles reusing Rx buffer/DMA map. With
this change fxp_add_rfabuf just handles appending a new RFA to
existing chain.
o Initialize mbuf length in fxp_new_rfabuf.
o Don't reset rnr and have fxp(4) handle received frames even if
it couldn't allocate new Rx buffer. This will make fxp(4) reload
updated RFA under rnr case. The rnr would still be reset to 0 if
polling is active and fxp(4) processed number of allowed Rx
events.
o Update if_iqdrops if fxp(4) couldn't allocate Rx buffer.
Previously fxp(4) used to try to reuse Rx buffer when new buffer
allocation is failed. But fxp(4) didn't take into account loaded
DMA map such that the same DMA map was loaded again without
unloading the map. There is no reason to unload the loaded map and
reload the same map again, just reusing the map is enough. I
believe the spare DMA map in softc was introduced to implement this
behaviour. Also fxp(4) used to stop Rx processing if once Rx buffer
allocation or DMA map load fails which in turn resulted in losing
incoming frames under heavy network load. With this change fxp(4)
should survive from resource shortage condition.
attilio [Tue, 25 Nov 2008 23:24:29 +0000 (23:24 +0000)]
Add the -m option to pmcstat.
This option prints the list of sampled PCs along with the function name,
the start and end addresses of this where their live within.
Reviewed by: jkoshy
Tested by: gnn
Sponsored by: Nokia
trasz [Tue, 25 Nov 2008 23:05:46 +0000 (23:05 +0000)]
MFp4: We don't support TX_CREATE_ACL_ATTR nor TX_MKDIR_ACL_ATTR; code found
in zfs_replay.c will panic if it encounters transactions of this type.
Make sure we don't put these into the ZIL.
lulf [Tue, 25 Nov 2008 20:28:33 +0000 (20:28 +0000)]
- Fix a potential NULL pointer reference. Note that this should not happen in
practice, but it is a good programming practice and allows the kernel to not
depend on userland correctness.
- While there, make sizeof usage match the rest of the code.
lulf [Tue, 25 Nov 2008 19:13:58 +0000 (19:13 +0000)]
- Fix a potential NULL pointer reference. Note that this cannot happen in
practice, but it is a good programming practice nontheless and it allows the
kernel to not depend on userland correctness.
Found with: Coverity Prevent(tm)
CID: 655-659, 664-667
imp [Tue, 25 Nov 2008 19:05:46 +0000 (19:05 +0000)]
Convert BWCT and HL200 over to new board mechanism as well. The
TSC4370 config file wasn't committed to this tree, so I don't know if
my changes will work on it or not.
imp [Tue, 25 Nov 2008 18:40:40 +0000 (18:40 +0000)]
Start to make it easier to add AT91RM9200 based boards:
o Copy kb920x_machdep.c to at91_machdep.c
o Move board_init to new board_kb920x.c
o rename ramsize to at91_ramsize and make it accessible to board_* files.
o Delete files.kb920x. We can do this selection with the new boards.
o Add a stub for the tsc4370 board init, which will be added in
a future commit.
o Add new 'devices' at91_board_kb920x and at91_board_tsc4370. More are
needed and will be added in future commits.
marcus [Tue, 25 Nov 2008 15:36:15 +0000 (15:36 +0000)]
Move vn_fullpath1() outside of FILEDESC locking. This is being done in
advance of teaching vn_fullpath1() how to query file systems for
vnode-to-name mappings when cache lookups fail.
Thanks to kib for guidance and patience on this process.
scottl [Tue, 25 Nov 2008 07:17:11 +0000 (07:17 +0000)]
Big update to the iSCSI initiator code. Highlights include IPv6 support,
many bugs fixes, many more performance improvements.
Submitted by: Danny Braniss
M sbin/iscontrol/iscsi.conf.5
M sbin/iscontrol/iscontrol.8
M sbin/iscontrol/iscontrol.h
M sbin/iscontrol/config.c
M sbin/iscontrol/fsm.c
M sbin/iscontrol/login.c
M sbin/iscontrol/pdu.c
M sbin/iscontrol/misc.c
M sbin/iscontrol/auth_subr.c
M sbin/iscontrol/iscontrol.c
M sys/dev/iscsi/initiator/isc_cam.c
M sys/dev/iscsi/initiator/iscsi.h
M sys/dev/iscsi/initiator/isc_soc.c
M sys/dev/iscsi/initiator/iscsi_subr.c
M sys/dev/iscsi/initiator/iscsivar.h
M sys/dev/iscsi/initiator/isc_subr.c
M sys/dev/iscsi/initiator/iscsi.c
M sys/dev/iscsi/initiator/isc_sm.c
yongari [Tue, 25 Nov 2008 04:16:16 +0000 (04:16 +0000)]
- Allow fxp_encap() enqueue failed transmissions and set
IFF_DRV_OACTIVE to note resource shortage to upper stack.
- Don't count number of mbuf chains. Default 32 DMA segments for a
frame is enough for most cases. If bus_dmamap_mbuf_sg fails use
m_collapse(9) to collapse the mbuf chain instead of relying on
expensive m_defrag(9).
- Move bpf handling to fxp_start_body() which is supposed to be
more appropriate place.
- Always arm watchdog timer whenever a new Tx request is made.
Previously fxp(4) used to arm watchdog timer only when
FXP_CXINT_THRESH-th Tx request is made. Because fxp(4) does not
rely on Tx interrupt to reclaim transmitted mbufs it's better to
arm watchdog timer to detect potential lockups.
- Add more aggresive Tx buffer reclaiming in fxp_start_body to make
room for new Tx requests. Since fxp(4) does not request Tx
completion interrupt for every frames it's necessary to clean
TXCBs in advance to saturate link.
- Make fxp(4) try to start more packets transmitting regardless of
interrupt type in fxp_intr_body.
weongyo [Tue, 25 Nov 2008 02:19:02 +0000 (02:19 +0000)]
- improve AL2230 RF handling when the device type is zd1211. After this
patch the RX/TX performance becomes about 17~18 Mbps comparing with
the previous whose values were RX 7~8Mbps and TX 13~14Mbps.
- improve AL2230 RF handling in zd1211b
- support AL2230S RF that PV2000 is renamed to AL2230S
- use register ZYD_CR244, ZYD_CR243, ZYD_CR242 when the driver writes
values on RF. This routine is more faster than the original one
- use private TX lock to avoid LOR at zyd_raw_xmit()
- increase TX slots from 1 to 5
- needs to set the channel at IEEE80211_S_AUTH not IEEE80211_S_RUN
- detailed error handling. In previous the next command was sent to the
device even if there was errors
- setting ZYD_MAC_RX_THRESHOLD value should be different between 1211
and 1211b
- only try to stop the device at zyd_init_locked() if the device is
UPed
- do not use MTX_RECURSE
- do not try to grap Giant lock when the channel is changing
- move the device initialization routines from zyd_attach to zyd_init to
give a device full-reset chance to the driver.
- code cleanup at zyd_raw_xmit()
- simplify zyd_attach() routines
- resort functions and clean up variables
- DPRINTF style change.
- style(9)
yongari [Tue, 25 Nov 2008 02:05:01 +0000 (02:05 +0000)]
Move unarming watchdog timer and pending multicast configuration
check to fxp_txeof(). While I'm here unarm watchdog timer only if
there are no pending queued Tx requests.
Previously the watchdog timer was unarmed whenever Tx interrupt is
raised. This could be resulted in hiding root cause of watchdog
timeouts.
yongari [Tue, 25 Nov 2008 01:33:16 +0000 (01:33 +0000)]
Fix Tx/Rx checksum offload ioctl handling and make Rx handler honor
checksum offload configuration. Now checksum offload can be
controlled by ifconfig(8).
While I'm here add an additional check for interface capabilities
before applying user's request.
imp [Tue, 25 Nov 2008 00:13:26 +0000 (00:13 +0000)]
Tweak the disclaimer section of the license to match COPYRIGHT, for
better or worse. Ok'd by folks that have additional copyrights to the
files in cases where there's joint authorship.
sam [Mon, 24 Nov 2008 01:31:10 +0000 (01:31 +0000)]
nuke special handling of RXORN interrupt; the hal marks the FATAL
bit in the interrupt status when RXORN is hit and the chip requires
a reset so our special handling was causing useless resets
scf [Sun, 23 Nov 2008 23:26:12 +0000 (23:26 +0000)]
Fixed style issues with variable ordering and naming, spacing and
parentheses.
Fixed alignment issue in gr_dup() in its assignment of gr_mem using a
struct to force alignment without performing alignment mathematics. This
was noticed recently with libutil was built with WARNS=6 on platform such
as sparc64.
Added checks to gr_dup(), gr_equal() and gr_make() to prevent segfaults
when examining struct group's with the struct members pointing to NULL's.
dwmalone [Sun, 23 Nov 2008 21:05:22 +0000 (21:05 +0000)]
It's possible that the dump device has gone away after it was
configured, change the message to let people know this is a
possibility. I've slightly changed the message from the one
submitted by Pekka to keep the printf on one line.
dwmalone [Sun, 23 Nov 2008 21:01:28 +0000 (21:01 +0000)]
Make the new CCEQ macro a little more like the old one - first do
the comparison between c and val and then compare val to _POSIX_VDISABLE.
This avoids comparing c (which is usually of type char) to
_POSIX_VDISABLE (which has value 0xff and may not be representable
as a char).