gavin [Tue, 16 Feb 2010 22:53:18 +0000 (22:53 +0000)]
Implement the rename query, for when a file with the same name as the one
about to be extracted already exists. The question, and interpretation
of the response is deliberately compatible with Info-Zip.
This change was originally obtained from NetBSD, but has three changes:
- better compatibility with Info-Zip in the handling of ^D
- Use getdelim() rather than getline()
- bug fix: != changed to == in the "file rename" code
I suspect the latter is also a bug in NetBSD, but I can't easily confirm
this.
marius [Tue, 16 Feb 2010 20:00:21 +0000 (20:00 +0000)]
Factor out the code shared between NFS client and server into its own
module. With r203732 it became apparent that creating the sysctl nodes
twice causes at least a warning, however the whole code shouldn't be
present twice in the first place.
marcel [Tue, 16 Feb 2010 06:47:00 +0000 (06:47 +0000)]
Unbreak ia64: tls_model("initial-exec") is invalid, because it assumes
the static TLS model, which is fundamentally different from the dynamic
TLS model. The consequence was data corruption. Limit the attribute to
i386 and amd64.
marcel [Tue, 16 Feb 2010 02:48:11 +0000 (02:48 +0000)]
Improve TLS variant I:
o Use obj->tlsinitsize to determine whether there's initialized data.
o If obj->tlssize > obj->tlsinitsize, then bzero uninitialized data.
o Don't exclude variant I from the work-around in free_tls_offset().
weongyo [Tue, 16 Feb 2010 01:44:14 +0000 (01:44 +0000)]
adds bwn(4) driver for supporting Broadcom BCM43xx chipsets.
o uses v4 firmware instead of v3. A port will be committed to create
the bwn firmware module.
o supports B/G and LP(low power) PHYs.
o supports 32 / 64 bits DMA operations.
o tested on big / little endian machines so should work on all
architectures.
It'd not connected to the build until the firmware port is committed.
marcel [Sun, 14 Feb 2010 16:56:24 +0000 (16:56 +0000)]
Some code churn:
o Eliminate IA64_PHYS_TO_RR6 and change all places where the macro is used
by calling either bus_space_map() or pmap_mapdev().
o Implement bus_space_map() in terms of pmap_mapdev() and implement
bus_space_unmap() in terms of pmap_unmapdev().
o Have ia64_pib hold the uncached virtual address of the processor interrupt
block throughout the kernel's life and access the elements of the PIB
through this structure pointer.
This is a non-functional change with the exception of using ia64_ld1() and
ia64_st8() to write to the PIB. We were still using assignments, for which
the compiler generates semaphore reads -- which cause undefined behaviour
for uncacheable memory. Note also that the memory barriers in ipi_send() are
critical for proper functioning.
With all the mapping of uncached memory done by pmap_mapdev(), we can keep
track of the translations and wire them in the CPU. This then eliminates
the need to reserve a whole region for uncached I/O and it eliminates
translation traps for device I/O accesses.
rpaulo [Sun, 14 Feb 2010 16:26:32 +0000 (16:26 +0000)]
Revert part of the 9285 support because it breaks the 9280 support. I'll
try to do the 9285 support without interfering with any other chipset
revisions support.
luigi [Sun, 14 Feb 2010 15:51:36 +0000 (15:51 +0000)]
a minimal set of changes to adapt to the utmp->utmpx changes.
lastlog still not implemented, i am hoping that Ed or someone
has some idea on how to fix this, but it is really not important.
kib [Sun, 14 Feb 2010 12:31:28 +0000 (12:31 +0000)]
Rename fields to match better the msdosfs headers. This work is still
incomplete as some info doesn't really belong to the structs where it is
defined.
Submitted by: Pedro F. Giffuni <giffunip tutopia com>
Reviewed by: bde
MFC after: 2 weeks
mav [Sun, 14 Feb 2010 12:30:35 +0000 (12:30 +0000)]
MFp4:
With FBS enabled, we have no idea what command caused timeout.
Implement same logic as in siis(4) - wait for other commands
complete or timeout and then give some more time.
kib [Sun, 14 Feb 2010 12:30:30 +0000 (12:30 +0000)]
Bug fixes from NetBSD
- fix sign-compare issues.
- ANSIfy a couple of functions.
- Remove more duplicate #includes.
- Memory leak found by Coverity on NetBSD.
Submitted by: Pedro F. Giffuni <giffunip tutopia com>
Reviewed by: bde
MFC after: 2 weeks
kib [Sun, 14 Feb 2010 12:25:03 +0000 (12:25 +0000)]
Some cleanups from NetBSD:
- C99 initializers.
- Change the default volume label from "NO NAME" to "NO_NAME".
- Set OEM String to "BSD4.4 " following the unnamed spacing convention
in that other OS that suggests "MSWIN4.1"
Also, David Naylor's changes for Clang, mostly changing the signess
of constants.
Submitted by: Pedro F. Giffuni <giffunip tutopia com>
Clang fixes by: David Naylor <naylor.b.david gmail com>
Reviewed by: bde (with some disagreement about Clang issues)
MFC after: 2 weeks
ed [Sun, 14 Feb 2010 12:00:42 +0000 (12:00 +0000)]
Make <sys/timeb.h> work without including <sys/types.h>.
According to the last POSIX specification that contained <sys/timeb.h>,
this header should also typedef time_t properly. Also add a proper
comment to the final #endif.
rmacklem [Sun, 14 Feb 2010 00:18:32 +0000 (00:18 +0000)]
Change the default value for vfs.newnfs.enable_locallocks to 0 for
the experimental NFS server, since local locking is known to be
broken and the patch to fix it is still a work in progress.
rmacklem [Sat, 13 Feb 2010 23:56:19 +0000 (23:56 +0000)]
This fixes the experimental NFS server so that it won't crash in the
caching code for IPv6 by fixing a typo that used the incorrect variable.
It also fixes the indentation of the statement above it.
Reported by: simon AT comsys.ntu-kpi.kiev.ua
MFC after: 5 days
marius [Sat, 13 Feb 2010 19:05:34 +0000 (19:05 +0000)]
Add ssm(4), which serves as a glue device allowing devices beneath the
scalable shared memory node, which is used in large UltraSPARC III based
machines to group snooping-coherency domains together, like schizo(4) to
be treated like nexus(4) children.
marius [Sat, 13 Feb 2010 18:51:49 +0000 (18:51 +0000)]
- Add the 'cmp' and 'core' pseudo-busses which are used to group CPU cores
to the exclusion lists as the CPU nodes aren't handled as regular devices
either. Also add the pseudo-devices found in Sun Fire V1280.
- Allow nexus_attach() and nexus_alloc_resource() to be used by drivers
derived from nexus(4) for subordinate busses.
- Don't add the zero-sized memory resources of glue devices to the resource
lists.
marius [Sat, 13 Feb 2010 16:52:33 +0000 (16:52 +0000)]
- Search the whole OFW device tree instead of only the children of the
root nexus device for the CPUs as starting with UltraSPARC IV the 'cpu'
nodes hang off of from 'cmp' (chip multi-threading processor) or 'core'
or combinations thereof. Also in large UltraSPARC III based machines
the 'cpu' nodes hang off of 'ssm' (scalable shared memory) nodes which
group snooping-coherency domains together instead of directly from the
nexus.
It would be great if we could use newbus to deal with the different ways
the 'cpu' devices can hang off of pseudo ones but unfortunately both
cpu_mp_setmaxid() and sparc64_init() have to work prior to regular device
probing.
- Add support for UltraSPARC IV and IV+ CPUs. Due to the fact that these
are multi-core each CPU has two Fireplane config registers and thus the
module/target ID has to be determined differently so the one specific
to a certain core is used. Similarly, starting with UltraSPARC IV the
individual cores use a different property in the OFW device tree to
indicate the CPU/core ID as it no longer is in coincidence with the
shared slot/socket ID.
This involves changing the MD KTR code to not directly read the UPA
module ID either. We use the MID stored in the per-CPU data instead of
calling cpu_get_mid() as a replacement in order prevent clobbering any
registers as side-effect in the assembler version. This requires CATR()
invocations from mp_startup() prior to mapping the per-CPU pages to be
removed though.
While at it additionally distinguish between CPUs with Fireplane and
JBus interconnects as these also use slightly different sizes for the
JBus/agent/module/target IDs.
- Make sparc64_shutdown_final() static as it's not used outside of
machdep.c.
gavin [Sat, 13 Feb 2010 16:22:08 +0000 (16:22 +0000)]
When growing a UFS1 filesystem, we need to initialise all inodes in any new
cylinder groups that are created. When the filesystem is first created,
newfs always initialises the first two blocks of inodes, and then in the
UFS1 case will also initialise the remaining inode blocks. The changes in
growfs.c 1.23 broke the initialisation of all inodes, seemingly based on
this implementation detail in newfs(8). The result was that instead of
initialising all inodes, we would actually end up initialising all but the
first two blocks of inodes. If the filesystem was grown into empty
(all-zeros) space then the resulting filesystem was fine, however when
grown onto non-zeroed space the filesystem produced would appear to have
massive corruption on the first fsck after growing.
A test case for this problem can be found in the PR audit trail.
Fix this by once again initialising all inodes in the UFS1 case.
mlaier [Sat, 13 Feb 2010 16:04:58 +0000 (16:04 +0000)]
Fix drbr and altq interaction:
- introduce drbr_needs_enqueue that returns whether the interface/br needs
an enqueue operation: returns true if altq is enabled or there are
already packets in the ring (as we need to maintain packet order)
- update all drbr consumers
- fix drbr_flush
- avoid using the driver queue (IFQ_DRV_*) in the altq case as the
multiqueue consumer does not provide enough protection, serialize altq
interaction with the main queue lock
- make drbr_dequeue_cond work with altq
marius [Sat, 13 Feb 2010 15:36:33 +0000 (15:36 +0000)]
- At least the trap table of the Sun Fire V1280 firmware apparently has
no cleanwindows handler so just remove trying to trigger it from _start
and the AP trampoline code as that leads to a crash there. This should
be okay as leaking data from the OFW via the CPU registers on start of
the kernel should be no real concern.
- Make the comments of _start and the AP trampoline code regarding the
initializations they perform match each other and reality.
- Make the comments of the AP trampoline code regarding iTLB accesses
refer to the right macro.
marius [Sat, 13 Feb 2010 14:40:42 +0000 (14:40 +0000)]
Use the SUNW,{d,i}tlb-load methods for entering locked TLB entries like
OpenBSD and OpenSolaris do instead of fiddling with the MMUs ourselves.
Unlike direct access the firmware methods don't automatically use the
next free (?) TLB slot, instead the slot to be used has to be specified.
We allocate the TLB slots for the kernel top-down as OpenSolaris suggests
that the firmware will always allocate the ones for its own use bottom-up.
Besides being simpler, according to OpenBSD using the firmware methods is
required to allow booting on Sun Fire E10K with multi-systemboard domains.
marius [Sat, 13 Feb 2010 14:13:39 +0000 (14:13 +0000)]
- Assert that HEAPSZ is a multiple of PAGE_SIZE as at least the firmware
of Sun Fire V1280 doesn't round up the size itself but instead lets
claiming of non page-sized amounts of memory fail.
- Change parameters and variables related to the TLB slots to unsigned
which is more appropriate.
- Search the whole OFW device tree instead of only the children of the
root nexus device for the BSP as starting with UltraSPARC IV the 'cpu'
nodes hang off of from 'cmp' (chip multi-threading processor) or 'core'
or combinations thereof. Also in large UltraSPARC III based machines
the 'cpu' nodes hang off of 'ssm' (scalable shared memory) nodes which
group snooping-coherency domains together instead of directly from the
nexus.
- Add support for UltraSPARC IV and IV+ BSPs. Due to the fact that these
are multi-core each CPU has two Fireplane config registers and thus the
module/target ID has to be determined differently so the one specific
to a certain core is used. Similarly, starting with UltraSPARC IV the
individual cores use a different property in the OFW device tree to
indicate the CPU/core ID as it no longer is in coincidence with the
shared slot/socket ID.
While at it additionally distinguish between CPUs with Fireplane and
JBus interconnects as these also use slightly different sizes for the
JBus/agent/module/target IDs.
- Check the return value of init_heap(). This requires moving it after
cons_probe() so we can panic when appropriate. This should be fine as
the PowerPC OFW loader uses that order for quite some time now.
kib [Sat, 13 Feb 2010 12:41:07 +0000 (12:41 +0000)]
- Add idempotency guards so the structures can be used in other utilities.
- Update bpb structs with reserved fields.
- In direntry struct join deName with deExtension. Although a
fix was attempted in the past, these fields were being overflowed,
Now this is consistent with the spec, and we can now share the
WinChksum code with NetBSD.
Submitted by: Pedro F. Giffuni <giffunip tutopia com>
Mostly obtained from: NetBSD
Reviewed by: bde
MFC after: 2 weeks
trasz [Sat, 13 Feb 2010 12:03:03 +0000 (12:03 +0000)]
Remove list of locking primitives, which is kind of redundant, move
information about witness(9) to the section about interactions, and
expand 'contexts' table.
avg [Sat, 13 Feb 2010 11:47:04 +0000 (11:47 +0000)]
kgdb: initialize n_type field of nlist entry for kvm_nlist call
kvm_nlist skips lookup for entries that have n_type != N_UNDF.
N_UNDF happens to be zero, so n_type typically has a correct
value by accident, but not always.
Note: jhb has a patch that replaces kvm_nlist use with direct
gdb parsing.
kib [Sat, 13 Feb 2010 10:34:50 +0000 (10:34 +0000)]
When ffs_realloccg() failed to allocate bigger fragment and, because
pending blocks are scheduled for removal, goes to retry the (re)allocation,
clear the bp pointer. It might happen that meantime free space is really
exhausted and we are entering nospace: label without bread()ing buffer,
causing stale bp value to be brelse()d again.
Tested by: pho
(Producing a scenario to reliably reproduce the
race appeared to be much harder then fixing the bug)
MFC after: 1 week