Bring ioctlname() in line with all the other *name() functions, which
actually print the name (or the numeric value, if they can't figure out
the correct name) instead of just returning a pointer to it. Also, since
ioctl numbers are not and probably never will be unique, drop support for
using a switch statement instead of an if/else chain.
Setting up TLS block for the main thread must be done after the
relocations are processed, since tls initialization section might be
itself subject for relocations. Only set up of the block is postponed,
the tls block offsets are allocated before relocation processing, since
TLS-related relocations may need offsets ready.
Reported by: ale
PR: threads/161344
Reviewed by: kan
MFC after: 1 week
Marius Strobl [Sat, 8 Oct 2011 12:33:10 +0000 (12:33 +0000)]
- Follow the lead of dcphy(4) and pnphy(4) and move the reminder of the PHY
drivers that only ever attach to a particular MAC driver, i.e. inphy(4),
ruephy(4) and xlphy(4), to the directory where the respective MAC driver
lives and only compile it into the kernel when the latter is also there,
also removing it from miibus.ko and moving it into the module of the
respective MAC driver.
- While at it, rename exphy.c, which comes from NetBSD where the MAC driver
it corresponds to also is named ex(4) instead of xl(4) but that in FreeBSD
actually identifies itself as xlphy(4), and its function names accordingly
for consistency.
- Additionally while at it, fix some minor style issues like whitespace
in the register headers and add multi-inclusion protection to inphyreg.h.
I appreciate the logic behind using a (void) cast to indicate that the
return value is intentionally ignored, but frankly, all it does is
get in the way of the code.
Also fix a few other incorrect casts, such as (void *)malloc(foo) and
passing signed values to %x.
1) Some of the #defines or enums for which we auto-generate naming
functions may be wider than int, so use intmax_t throughout. Also
add missing casts in printf() calls.
2) Clean up some of the auto-generated code to improve readability.
3) Auto-generate kdump_subr.h. Note that this requires a semi-ugly hack
in the Makefile to make sure it is generated before make(1) tries to
build kdump.c, or preprocess it for 'make depend'.
Stanislav Sedov [Sat, 8 Oct 2011 00:01:17 +0000 (00:01 +0000)]
- Add a couple of more sed subsitutions needed to get the correct
libtool.m4. With these fixes libtool will correctly indentify the
system as ELF (and not a.out).
- While here, change the substitutions so they're still correctly
match freebsd1.x, freebsd2.x etc.
Pyun YongHyeon [Sat, 8 Oct 2011 00:00:54 +0000 (00:00 +0000)]
BCE_MISC_ID register of BCM5716 returns the same id of BCM5709 so
remove explicit checks for BCM5716.
The BCM5709 and BCM5716 chips are virtually indistinguishable by
software except for the PCI device ID. The two chips differ in
that BCM5709 supports TCP/IP and iSCSI offload in Windows while
the BCM5716 doesn't.
While I'm here remove now unused definition of BCE_CHIP_NUM_5716
and BCE_CHIP_ID_5716_C0.
Qing Li [Fri, 7 Oct 2011 22:22:19 +0000 (22:22 +0000)]
Do not try removing an ARP entry associated with a given interface
address if that interface does not support ARP. Otherwise the
system will generate error messages unnecessarily due to the missing
entry.
PR: kern/159602
Submitted by: pluknet
MFC after: 3 days
Marius Strobl [Fri, 7 Oct 2011 21:23:42 +0000 (21:23 +0000)]
Sync with ahc(4)/ahd(4)/sym(4) etc:
Zero any sense not transferred by the device as the SCSI specification
mandates that any untransferred data should be assumed to be zero.
Qing Li [Fri, 7 Oct 2011 18:01:34 +0000 (18:01 +0000)]
Remove the reference held on the loopback route when the interface
address is being deleted. Only the last reference holder deletes the
loopback route. All other delete operations just clear the IFA_RTSELF
flag.
PR: kern/159601
Submitted by: pluknet
Reviewed by: discussed on net@
MFC after: 3 days
Andre Oppermann [Fri, 7 Oct 2011 16:39:03 +0000 (16:39 +0000)]
Prevent TCP sessions from stalling indefinitely in reassembly
when reaching the zone limit of reassembly queue entries.
When the zone limit was reached not even the missing segment
that would complete the sequence space could be processed
preventing the TCP session forever from making any further
progress.
Solve this deadlock by using a temporary on-stack queue entry
for the missing segment followed by an immediate dequeue again
by delivering the contiguous sequence space to the socket.
Add logging under net.inet.tcp.log_debug for reassembly queue
issues.
Reviewed by: lsteward (previous version)
Tested by: Steven Hartland <killing-at-multiplay.co.uk>
MFC after: 3 days
Andre Oppermann [Fri, 7 Oct 2011 13:43:01 +0000 (13:43 +0000)]
Add back the IP header length to the total packet length field on
raw IP sockets. It was deducted in ip_input() in preparation for
protocols interested only in the payload.
On raw sockets the IP header should be delivered as it at came in
from the network except for the byte order swaps in some fields.
This brings us in line with all other OS'es that provide raw
IP sockets.
Reported by: Matthew Cini Sarreo <mcins1-at-gmail.com>
MFC after: 3 days
Ed Schouten [Fri, 7 Oct 2011 12:21:50 +0000 (12:21 +0000)]
Tab should not blank cells.
It seems I was under the impression that a tab differs from a single
forward tabulation, namely that it blanks the underlying cells. This
seems not to be the case. They are identical.
This should fix applications like jove(1) that use tabs instead of
explicit cursor position setting.
As noted in kern/159780, printf() is not very jail-friendly, since it can't be easily monitored by jail management tools. This patch reports an error via log() instead, which, if nobody is watching the log file, still prints to the console.
Adrian Chadd [Fri, 7 Oct 2011 06:13:38 +0000 (06:13 +0000)]
Begin implementing correct MIPS24K sampling mode behaviour.
* Add the interrupt bit in the configuration register
* Correctly set the counter register for the sampling overflow
interrupt. The interrupt is asserted when bit 31 is set.
So set the overflow value at 0x80000000 and subtract the
programmed value as appropriate.
Work around some behavior of gpart that I absolutely do not understand in
order to make every operation of the partition editor fully revertable.
Under *no circumstances* will it any longer touch the disks until the user
presses Finish and confirms it.
Rick Macklem [Fri, 7 Oct 2011 01:15:04 +0000 (01:15 +0000)]
A crash reported on freebsd-fs@ on Sep. 23, 2011 under the subject
heading "kernel panics with RPCSEC_GSS" appears to be caused by a
corrupted tailq list for the client structure. Looking at the code, calls
to the function svc_rpc_gss_forget_client() were done in an SMP unsafe
manner, with the svc_rpc_gss_lock only being acquired in the function
and not before it. As such, when multiple threads called
svc_rpc_gss_forget_client() concurrently, it could try and remove the
same client structure from the tailq lists multiple times.
The patch fixes this by moving the critical code into a separate
function called svc_rpc_gss_forget_client_locked(), which must be
called with the lock held. For the one case where the caller would
have no interest in the lock, svc_rpc_gss_forget_client() was retained,
but a loop was added to check that the client structure is still in
the tailq lists before removing it, to make it safe for multiple
concurrent calls.
Tested by: clinton.adams at gmail.com (earlier version)
Reviewed by: zkirsch
MFC after: 3 days
Attilio Rao [Thu, 6 Oct 2011 14:29:38 +0000 (14:29 +0000)]
For the INP_TIMEWAIT case, there is no valid tcpcb object tied to the
inpcb object.
Skip the TCP_SIGNATURE check in that case as it is consistent with the
output path (no TCP_SIGNATURE for outcoming packets in TIMEWAIT state)
and also because for TIMEWAIT state the verify may be less effective.
Sponsored by: Sandvine Incorporated
Reported by: rwatson
No objections by: rwatson
MFC after: 3 days
Marius Strobl [Thu, 6 Oct 2011 11:48:13 +0000 (11:48 +0000)]
- Currently, sched_balance_pair() may cause a CPU to send an IPI_PREEMPT to
itself, which sparc64 hardware doesn't support. One way to solve this
would be to directly call sched_preempt() instead of issuing a self-IPI.
However, quoting jhb@:
"On the other hand, you can probably just skip the IPI entirely if we are
going to send it to the current CPU. Presumably, once this routine
finishes, the current CPU will exit softlock (or will do so "soon") and
will then pick the next thread to run based on the adjustments made in
this routine, so there's no need to IPI the CPU running this routine
anyway. I think this is the better solution. Right now what is probably
happening on other platforms is as soon as this routine finishes the CPU
processes its self-IPI and causes mi_switch() which will just switch back
to the softclock thread it is already running."
- With r226054 and the the above change in place, sparc64 now no longer is
incompatible with ULE and vice versa. However, powerpc/E500 still is.
Marius Strobl [Thu, 6 Oct 2011 11:01:31 +0000 (11:01 +0000)]
- Use atomic operations rather than sched_lock for safely assigning pm_active
and pc_pmap for SMP. This is key to allowing adding support for SCHED_ULE.
Thanks go to Peter Jeremy for additional testing.
- Add support for SCHED_ULE to cpu_switch().
Remove assertion against empty NFSv4 ACLs. An empty ACL is not exactly
valid - we don't allow for setting it on a file, for example - but it's
not something we should assert on.
For STABLE kernel, it changes nothing, because it's not compiled with
INVARIANTS. If it was, it would fix crashes. It also fixes an assert
in libc encountered with NFSv4 without nfsuserd(8) running.
Qing Li [Wed, 5 Oct 2011 16:27:11 +0000 (16:27 +0000)]
The IFA_RTSELF instead of the IFA_ROUTE flag should be checked to
determine if a loopback route should be installed for an interface
IPv6 address. Another condition is the address must not belong to a
looopback interface.
John Baldwin [Wed, 5 Oct 2011 16:03:47 +0000 (16:03 +0000)]
Ignore SRAT memory entries if the memory range does not overlap with an
existing phys_avail[] table. If a hw.physmem setting causes a memory
domain to not be present in phys_avail[], the SRAT table will now be
ignored rather than triggering a panic when a CPU in the missing domain
tries to allocate a page.
Gabor Kovesdan [Wed, 5 Oct 2011 09:56:43 +0000 (09:56 +0000)]
Update BSD grep to the latest development version. It has some code
backported that was written for the TRE integration project in Google
Summer of Code 2011. This is a temporary solution until the whole
regex library is not replaced so that BSD grep development can continue
and the backported code gets some review and testing. This change only
improves scalability slightly, there is no big performance boost yet
but several minor bugs have been found and fixed.
Approved by: delphij (mentor)
Sposored by: Google Summer of Code 2011
MFC after: 1 week
Remove bogus and wrong definition of BLKDEV_IOSIZE.
Wrong in that it must be guarded (it's configurable)
and bogus in that there's absolutely no rationale for
it not default to a page size like all other archs.
o Clean up some ID printfs, and put under bootverbose
o Remove redundant lookups of base address in cf_identify
o Fix some indenting issues
o Fix an identification bug that uses DRQ to checlk for ident block
returned. The correct spec is to look for BSY to be cleared.
Partially revert r224661:
octeon_ap_boot is not a bitmask. It holds the CPU Id of the
AP currently being started. As such there's no need to make
it a 64-bit integral and we're not limited to 64 CPUs.
Adrian Chadd [Tue, 4 Oct 2011 14:26:45 +0000 (14:26 +0000)]
Handle the situation where fixups_close() has been called but more fixups
are still available on the queue.
Without this, the fixups producer/consumer pipeline will artifically terminate
before all of the fixups have been processed, leading to incomplete updates
and generally quite unhappy users.
Add some improvements in the idle table callbacks:
- Replace instances of manual assembly instruction "hlt" call
with halt() function calling.
- In cpu_idle_mwait() avoid races in check to sched_runnable() using
the same pattern used in cpu_idle_hlt() with the 'hlt' instruction.
- Add comments explaining the logic behind the pattern used in
cpu_idle_hlt() and other idle callbacks.
Adrian Chadd [Tue, 4 Oct 2011 00:32:10 +0000 (00:32 +0000)]
Add an AR5416 aware version of the "current RSSI" function.
Pre-11n devices and AR5416 use AR_PHY(263) for current RX RSSI.
AR9130 and later have a fourth calibration register (for doing
ADC calibration) and thus the register has moved to AR_PHY(271).
This isn't currently used by any of the active code; I'm committing
this for completeness and in case any third party code attempts to
use it for legacy reasons.
Alexander Motin [Mon, 3 Oct 2011 21:19:15 +0000 (21:19 +0000)]
Revert r225875, r225877:
It is reported that on some chips (e.g. the 970MP) behavior of POW bit set
simultaneously with modifying other bits is undefined and may cause hangs.
The race should be handled in some other way, but for now just get back.
Add descriptor sense support to CAM, and honor sense residuals properly in
CAM.
Desriptor sense is a new sense data format that originated in SPC-3. Among
other things, it allows for an 8-byte info field, which is necessary to
pass back block numbers larger than 4 bytes.
This change adds a number of new functions to scsi_all.c (and therefore
libcam) that abstract out most access to sense data.
This includes a bump of CAM_VERSION, because the CCB ABI has changed.
Userland programs that use the CAM pass(4) driver will need to be
recompiled.
camcontrol.c: Change uses of scsi_extract_sense() to use
scsi_extract_sense_len().
Use scsi_get_sks() instead of accessing sense key specific
data directly.
scsi_modes: Update the control mode page to the latest version (SPC-4).
scsi_cmds.c,
scsi_target.c: Change references to struct scsi_sense_data to struct
scsi_sense_data_fixed. This should be changed to allow the
user to specify fixed or descriptor sense, and then use
scsi_set_sense_data() to build the sense data.
ps3cdrom.c: Use scsi_set_sense_data() instead of setting sense data
manually.
cam_periph.c: Use scsi_extract_sense_len() instead of using
scsi_extract_sense() or accessing sense data directly.
cam_ccb.h: Bump the CAM_VERSION from 0x15 to 0x16. The change of
struct scsi_sense_data from 32 to 252 bytes changes the
size of struct ccb_scsiio, but not the size of union ccb.
So the version must be bumped to prevent structure
mis-matches.
scsi_all.h: Lots of updated SCSI sense data and other structures.
Add function prototypes for the new sense data functions.
Take out the inline implementation of scsi_extract_sense().
It is now too large to put in a header file.
Add macros to calculate whether fields are present and
filled in fixed and descriptor sense data
scsi_all.c: In scsi_op_desc(), allow the user to pass in NULL inquiry
data, and we'll assume a direct access device in that case.
Changed the SCSI RESERVED sense key name and description
to COMPLETED, as it is now defined in the spec.
Change the error recovery action for a number of read errors
to prevent lots of retries when the drive has said that the
block isn't accessible. This speeds up reconstruction of
the block by any RAID software running on top of the drive
(e.g. ZFS).
In scsi_sense_desc(), allow for invalid sense key numbers.
This allows calling this routine without checking the input
values first.
Change scsi_error_action() to use scsi_extract_sense_len(),
and handle things when invalid asc/ascq values are
encountered.
Add a new routine, scsi_desc_iterate(), that will call the
supplied function for every descriptor in descriptor format
sense data.
Add scsi_set_sense_data(), and scsi_set_sense_data_va(),
which build descriptor and fixed format sense data. They
currently default to fixed format sense data.
Add a number of scsi_get_*() functions, which get different
types of sense data fields from either fixed or descriptor
format sense data, if the data is present.
Add a number of scsi_*_sbuf() functions, which print
formatted versions of various sense data fields. These
functions work for either fixed or descriptor sense.
Add a number of scsi_sense_*_sbuf() functions, which have a
standard calling interface and print the indicated field.
These functions take descriptors only.
Add scsi_sense_desc_sbuf(), which will print a formatted
version of the given sense descriptor.
Pull out a majority of the scsi_sense_sbuf() function and
put it into scsi_sense_only_sbuf(). This allows callers
that don't use struct ccb_scsiio to easily utilize the
printing routines. Revamp that function to handle
descriptor sense and use the new sense fetching and
printing routines.
Move scsi_extract_sense() into scsi_all.c, and implement it
in terms of the new function, scsi_extract_sense_len().
The _len() version takes a length (which should be the
sense length - residual) and can indicate which fields are
present and valid in the sense data.
Add a couple of new scsi_get_*() routines to get the sense
key, asc, and ascq only.
mly.c: Rename struct scsi_sense_data to struct
scsi_sense_data_fixed.
sbp_targ.c: Use the new sense fetching routines to get sense data
instead of accessing it directly.
sbp.c: Change the firewire/SCSI sense data transformation code to
use struct scsi_sense_data_fixed instead of struct
scsi_sense_data. This should be changed later to use
scsi_set_sense_data().
ciss.c: Calculate the sense residual properly. Use
scsi_get_sense_key() to fetch the sense key.
mps_sas.c,
mpt_cam.c: Set the sense residual properly.
iir.c: Use scsi_set_sense_data() instead of building sense data by
hand.
iscsi_subr.c: Use scsi_extract_sense_len() instead of grabbing sense data
directly.
umass.c: Use scsi_set_sense_data() to build sense data.
Grab the sense key using scsi_get_sense_key().
Calculate the sense residual properly.
isp_freebsd.h: Use scsi_get_*() routines to grab asc, ascq, and sense key
values.
Calculate and set the sense residual.
MFC after: 3 days
Sponsored by: Spectra Logic Corporation
Qing Li [Mon, 3 Oct 2011 19:51:18 +0000 (19:51 +0000)]
A system may have multiple physical interfaces, all of which are on the
same prefix. Since a single route entry is installed for the prefix
(without RADIX_MPATH), incoming packets on the interfaces that are not
associated with the prefix route may trigger an error message about
unable to allocation LLE entry, and fails L2. This patch makes sure a
valid route is present in the system, and allow the aforementioned
condition to exist and treats as valid.
projects / FreeBSD / FreeBSD.git / log