Enji Cooper [Fri, 13 Jan 2017 04:02:09 +0000 (04:02 +0000)]
Add testcase for exFAT that currently fails
Disk image obtained from:
http://www.cfreds.nist.gov/dfr-images/dfr-01-xfat.dd.bz2 -- was ripped off the
first GPT partition and verified to be a FAT-like partition with file(1)/hexdump.
Pedro F. Giffuni [Fri, 13 Jan 2017 01:39:19 +0000 (01:39 +0000)]
Remove __nonnull() attributes from x86 machine check architecture.
These are of the few cases where we use the GCC non-null attributes in
non-header code. As part of a review [1] of our use of such attributes we
are replacing such uses of the overly aggressive GCC attribute with clang's
_Nonnull attribute.
In this case the attributes serve little purpose as they just don't
enforce run time checks, If anything the attributes would cause NULL pointer
checks to be ignored but there are no such checks so only effect is
cosmetic.
The references appear to be left over from code development and likely
already fulfilled their purpose.
Ian Lepore [Thu, 12 Jan 2017 21:18:43 +0000 (21:18 +0000)]
Restructure the tty_drain loop so that device-busy is checked one more time
after tty_timedwait() returns an error only if the error is EWOULDBLOCK;
other errors cause an immediate return. This fixes the case of the tty
disappearing while in tty_drain().
Bruce M Simpson [Thu, 12 Jan 2017 16:30:27 +0000 (16:30 +0000)]
Allow uart(4) to use MSI interrupts on single-port PCI instances.
Do this here as puc(4) disallows single-port instances; at least
one multi-port PCIe UART chip (in this case, the ASIX MCS9922)
present separate PCI configuration space (functions) for each UART.
Tested using lrzsz and a null-modem cable. The ExpressCard/34
variants containing the MCS9922 should also use MSI with this change.
Maxim Sobolev [Thu, 12 Jan 2017 10:14:54 +0000 (10:14 +0000)]
Fix slight type mismatch between so_options defined in sys/socketvar.h
and tw_so_options defined here which is supposed to be a copy of the
former (short vs u_short respectively).
Switch tw_so_options to be "signed short" to match the type of the field
it's inherited from.
Conrad Meyer [Thu, 12 Jan 2017 06:58:31 +0000 (06:58 +0000)]
g_raid: Prevent tasters from attempting excessively large reads
Some g_raid tasters attempt metadata reads in multiples of the provider
sectorsize. Reads larger than MAXPHYS are invalid, so detect and abort
in such situations.
Ravi Pokala [Thu, 12 Jan 2017 06:38:03 +0000 (06:38 +0000)]
Remove writability requirement for single-mbuf, contiguous-range
m_pulldown()
m_pulldown() only needs to determine if a mbuf is writable if it is going to
copy data into the data region of an existing mbuf. It does this to create a
contiguous data region in a single mbuf from multiple mbufs in the chain. If
the requested memory region is already contiguous and nothing needs to
change, the mbuf does not need to be writeable.
Ian Lepore [Thu, 12 Jan 2017 00:48:06 +0000 (00:48 +0000)]
Rework tty_drain() to poll the hardware for completion, and restore
drain timeout handling to historical freebsd behavior.
The primary reason for these changes is the need to have tty_drain() call
ttydevsw_busy() at some reasonable sub-second rate, to poll hardware that
doesn't signal an interrupt when the transmit shift register becomes empty
(which includes virtually all USB serial hardware). Such hardware hangs
in a ttyout wait, because it never gets an opportunity to trigger a wakeup
from the sleep in tty_drain() by calling ttydisc_getc() again, after
handing the last of the buffered data to the hardware.
While researching the history of changes to tty_drain() I stumbled across
some email describing the historical BSD behavior of tcdrain() and close()
on serial ports, and the ability of comcontrol(1) to control timeout
behavior. Using that and some advice from Bruce Evans as a guide, I've
put together these changes to implement the hardware polling and restore
the historical timeout behaviors...
- tty_drain() now calls ttydevsw_busy() in a loop at 10 Hz to accomodate
hardware that requires polling for busy state.
- The "new historical" behavior for draining during close(2) is retained:
the drain timeout is "1 second without making any progress". When the
1-second timeout expires, if the count of bytes remaining in the tty
layer buffer is smaller than last time, the timeout is extended for
another second. Unfortunately, the same logic cannot be extended all
the way down to the hardware, because the interface to that layer is a
simple busy/not-busy indication.
- Due to the previous point, an application that needs a guarantee that
all data has been transmitted must use TIOCDRAIN/tcdrain(3) before
calling close(2).
- The historical behavior of honoring the drainwait setting for TIOCDRAIN
(used by tcdrain(3)) is restored.
- The historical kern.drainwait sysctl to control the global default
drainwait time is restored, but is now named kern.tty_drainwait.
- The historical default drainwait timeout of 300 seconds is restored.
- Handling of TIOCGDRAINWAIT and TIOCSDRAINWAIT ioctls is restored
(this also makes the comcontrol(1) drainwait verb work again).
- Manpages are updated to document these behaviors.
Bjoern A. Zeeb [Thu, 12 Jan 2017 00:01:02 +0000 (00:01 +0000)]
Get rid of a compiler warning which I saw too often.
Include netinet/in.h before ip_compat.t which will then check if
IPPROTO_IPIP is defined or not. Doing it the other way round,
ip_compat.h would not find it defined and netinet/in.h then
redefine it.
Navdeep Parhar [Wed, 11 Jan 2017 23:48:17 +0000 (23:48 +0000)]
cxgbe/tom: Add VIMAGE support to the TOE driver.
Active Open:
- Save the socket's vnet at the time of the active open (t4_connect) and
switch to it when processing the reply (do_act_open_rpl or
do_act_establish).
Passive Open:
- Save the listening socket's vnet in the driver's listen_ctx and switch
to it when processing incoming SYNs for the socket.
- Reject SYNs that arrive on an ifnet that's not in the same vnet as the
listening socket.
CLIP (Compressed Local IPv6) table:
- Add only those IPv6 addresses to the CLIP that are in a vnet
associated with one of the card's ifnets.
Misc:
- Set vnet from the toepcb when processing TCP state transitions.
- The kernel sets the vnet when calling the driver's output routine
so t4_push_frames runs in proper vnet context already. One exception
is when incoming credits trigger tx within the driver's ithread. Set
the vnet explicitly in do_fw4_ack for that case.
MFC after: 3 days
Sponsored by: Chelsio Communications
Pedro F. Giffuni [Wed, 11 Jan 2017 23:05:29 +0000 (23:05 +0000)]
rpcgen(1): Avoid unused variable warning on generated code.
Avoid "unused variable 'i'" warnings in generated .c files by only
emitting the "int i;" for non-opaque arrays. Opaque arrays use
xdr_opaque() rather than iterating over the array.
Colin Percival [Wed, 11 Jan 2017 22:50:57 +0000 (22:50 +0000)]
Remove obsolete path from fortune(6). This was inadvertantly left over
when fortune and other games moved from /usr/games to /usr/bin; I am
removing rather than correcting it since we normally do not mention in
the FILES section the paths to programs in /usr/bin/.
Dimitry Andric [Wed, 11 Jan 2017 20:00:24 +0000 (20:00 +0000)]
Use proper prototypes in struct boot_module_t
With clang 4.0.0, we are getting the following warnings about struct
boot_module_t in efi's boot_module.h:
In file included from sys/boot/efi/boot1/ufs_module.c:41:
sys/boot/efi/boot1/boot_module.h:67:14: error: this function declaration is not a prototype [-Werror,-Wstrict-prototypes]
void (*init)();
^
void
sys/boot/efi/boot1/boot_module.h:92:16: error: this function declaration is not a prototype [-Werror,-Wstrict-prototypes]
void (*status)();
^
void
sys/boot/efi/boot1/boot_module.h:95:24: error: this function declaration is not a prototype [-Werror,-Wstrict-prototypes]
dev_info_t *(*devices)();
^
void
3 errors generated.
Fix this by adding 'void' to the parameter lists. No functional change.
Dimitry Andric [Wed, 11 Jan 2017 19:59:27 +0000 (19:59 +0000)]
Make EFI_RESERVED_SERVICE a proper prototype
With clang 4.0.0, the EFI API header causes the following warning:
In file included from sys/boot/efi/loader/bootinfo.c:43:
In file included from sys/boot/efi/loader/../include/efi.h:52:
sys/boot/efi/include/efiapi.h:534:32: error: this function declaration is not a prototype [-Werror,-Wstrict-prototypes]
(EFIAPI *EFI_RESERVED_SERVICE) (
^
Dimitry Andric [Wed, 11 Jan 2017 18:47:00 +0000 (18:47 +0000)]
Don't include <errno.h> in reloc_elf.c, as it includes <stand.h> just
after it, which has a conflicting definition of errno. This leads to
the following warning with clang 4.0.0:
In file included from sys/boot/common/reloc_elf32.c:6:
In file included from sys/boot/common/reloc_elf.c:37:
/usr/obj/usr/src/tmp/usr/include/stand.h:155:12: error: this function declaration is not a prototype [-Werror,-Wstrict-prototypes]
extern int errno;
^
sys/sys/errno.h:46:26: note: expanded from macro 'errno'
#define errno (* __error())
^
[sdhci] Add ACPI platform support for SDHCI driver
- Create ACPI version of SDHCI attach/detach/accessors logic. Some
platforms (e.g. BayTrail-based Minnowboard) expose SDHCI devices
via ACPI, not PCI
- Add sdchi_acpi kernel module
Martin Matuska [Tue, 10 Jan 2017 21:59:35 +0000 (21:59 +0000)]
MFV r311899:
Sync libarchive with vendor.
Vendor bugfixes:
#691: Support for SCHILY.xattr extended attributes
#854: Spelling fixes
Multiple fixes in ACL code:
- prefer acl_set_fd_np() to acl_set_fd()
- if acl_set_fd_np() fails, do no fallback to acl_set_file()
- do not warn if trying to write ACLs to a filesystem without ACL support
- fix id handling in archive_acl_(from_to)_text*() for NFSv4 ACLs
Mark Johnston [Tue, 10 Jan 2017 21:41:28 +0000 (21:41 +0000)]
Do not set BIO_DONE if the BIO specifies a completion handler.
biowait() will otherwise race with completions of such BIOs. In-tree code
only calls biowait() on BIOs that do not specify a handler, so this change
should not have any functional impact.
Vendor changes:
#691: Support for SCHILY.xattr extended attributes
#854: Spelling fixes
Multiple fixes in ACL code:
- prefer acl_set_fd_np() to acl_set_fd()
- if acl_set_fd_np() fails, do no fallback to acl_set_file()
- do not warn if trying to write ACLs to a filesystem without ACL support
- fix id handling in archive_acl_(from_to)_text*() for NFSv4 ACLs
Pedro F. Giffuni [Tue, 10 Jan 2017 20:44:31 +0000 (20:44 +0000)]
Remove unused __gnu_inline() attribute.
This was meant to be used by a future FORTIFY_SOURCE implementation.
Probably for good, FORTIFY_SOURCE and this particular GCCism were never
well supported by clang or other compilers. Furthermore, the technology
has long since been replaced by either static checkers, sanitizers, or
even just the strong stack protector that was enabled by default.
Drop __gnu_inline to avoid cluttering the headers.
Alan Somers [Tue, 10 Jan 2017 20:43:32 +0000 (20:43 +0000)]
Fix memory leaks during "tail -r" of an irregular file
* Rewrite r_buf to use standard tail queues instead of a hand-rolled
circular linked list. Free dynamic allocations when done.
* Remove an optimization for the case where the file is a multiple of 128KB
in size and there is a scarcity of memory.
* Add ATF tests for "tail -r" and its variants.
Alan Somers [Tue, 10 Jan 2017 20:35:09 +0000 (20:35 +0000)]
ATFify the geom gate tests.
This ensures their cleanup routines will be run even if they should timeout.
tests/sys/geom/class/gate/ggate_test.sh
tests/sys/geom/class/gate/Makefile
Add an ATF test with three testcases, one for each TAP test. Use
ATF-style cleanup functions, and convert sleeps to polling loops.
ObsoleteFiles.inc
tests/sys/geom/class/gate/conf.sh
tests/sys/geom/class/gate/1_test.sh
tests/sys/geom/class/gate/2_test.sh
tests/sys/geom/class/gate/3_test.sh
Delete TAP test files
[efi] Fix .rel.data.* being erroneously merged into .data on ARM
Fix section pattern code to exclude .rel.data.* sections from being
merged into .data. Otherwise relocations in those sections are lost
in final binary
Reviewed by: andrew
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D9108
[efi] Fix off-by-one error in ARM .bss zeroing code in loader's _start
__bss_end should not be included in .bss zeroing code. Otherwise first 4
bytes of the section that follows .bss (in loader's case it's .sdata) are
overwritten by zero.
Reviewed by: andrew
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D9108
Fix acquisition of nested write compat rtld locks.
Obtaining compat rtld lock in write mode sets process signal mask to
block all signals. Previous mask is stored in the global variable
oldsigmask. If a lock is write-locked while another lock is already
write-locked, oldsigmask is overwritten by the total mask and on the
last unlock, all signals except traps appear to be blocked.
Fix this by counting the write-lock nested level, and only storing to
oldsigmask/restoring from it at the outermost level.
Masking signals disables involuntary preemption for libc_r, and there
could be no voluntary context switches in the locked code
(dl_iterate_phdr(3) keeps a lock around user callback, but it was
added long after libc_r was renounced). Due to this, remembering the
level in the global variable after the lock is obtained should be
safe, because no two libc_r threads can acquire different write locks
in parallel.
PR: 215826
Reported by: kami
Tested by: yamagi@yamagi.org (previous version)
To be reviewed by: kan
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Li-Wen Hsu [Tue, 10 Jan 2017 18:46:40 +0000 (18:46 +0000)]
Replace using of objdump with elfdump
In-tree objdump is too old to dump new ELF headers. But for example if we
use: `make CROSS_TOOLCHAIN=riscv64-gcc TARGET_ARCH=riscv64` and do not specify
CROSS_BINUTILS_PREFIX in env, embed_mfs.sh cannot find the correct objdump.
This patch just replaces using of objdump with elfdump to collect needed
information.
Later we may also put an ELFDUMP in CROSSENV and use it in embed_mfs.sh .
Navdeep Parhar [Tue, 10 Jan 2017 18:39:53 +0000 (18:39 +0000)]
The iw_cxgb and iw_cxgbe drivers should not use a FreeBSD device_t where
a linuxkpi style device is expected. If OFED/linuxkpi actually starts
using this field then we'll have to figure out whether to create fake
devices for these drivers or have linuxkpi deal with NULL device.
This mismatch was first reported as part of D6585.
Andrew Rybchenko [Tue, 10 Jan 2017 16:25:39 +0000 (16:25 +0000)]
sfxge(4): avoid unnecessary mbuf data prefetch
Unnecessary prefetch just loads HW prefetcher and displaces other
cache entries (which could be really useful).
If we parse mbuf for TSO early and use firmware-assisted TSO, we do not
expect mbuf data access when we compose firmware-assisted TSO (v1 or v2)
option descriptors. If packet header needs to be linearized or finally
FATSO cannot be used because of, for example, too big header, we do not
care about a bit more performance degradation because of prefetch
absence (it is better to optimize more common case).
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D9120