hiren [Thu, 28 Jan 2016 21:30:49 +0000 (21:30 +0000)]
MFC r294840
Persist timers TCPTV_PERSMIN and TCPTV_PERSMAX are hardcoded with 5 seconds and
60 seconds, respectively. Turn them into sysctls that can be tuned live. The
default values of 5 seconds and 60 seconds have been retained.
pfg [Thu, 28 Jan 2016 02:19:47 +0000 (02:19 +0000)]
MFC r294695:
ext2fs: passthrough any extra timestamps to the dinode struct.
In general we don't trust any of the extended timestamps unless the
EXT2F_ROCOMPAT_EXTRA_ISIZE feature is set. However, in the case where
we freshly allocated a new inode the information is valid and it is
better to pass it along instead of leaving the value undefined.
This should have no practical effect but should reduce the amount of
garbage if EXT2F_ROCOMPAT_EXTRA_ISIZE is set, like in cases where the
filesystem is converted from ext3 to ext4.
emaste [Thu, 28 Jan 2016 01:45:15 +0000 (01:45 +0000)]
MFC r294530: Add STB_GNU_UNIQUE symbol binding definition
Red Hat created STB_GNU_UNIQUE to handle certain special cases relating
to dynamically loading C++ DSOs[1].
We don't (currently) have support for STB_GNU_UNIQUE, but ought to
reserve the value in ELFNN_ST_BIND. This will also be used by an
upcoming ELF Tool Chain import.
jamie [Thu, 28 Jan 2016 00:41:07 +0000 (00:41 +0000)]
MFC r294749:
Allow the (old rc-style) exec_afterstart jail parameters to start numbering
at 0, like exec_prestart and the others do. Make param0 optional, i.e.
still look for param1.
jilles [Wed, 27 Jan 2016 22:56:04 +0000 (22:56 +0000)]
MFC r294565: sem: Don't free nameinfo that is still in list when open()
fails.
This bug could be reproduced easily by calling sem_open() with O_CREAT |
O_EXCL on a semaphore that is already open in the process. The struct
sem_nameinfo would be freed while still in sem_list and later calls to
sem_open() or sem_close() could access freed memory.
marius [Wed, 27 Jan 2016 22:50:04 +0000 (22:50 +0000)]
- Add an entry for the SIIG Cyber 2SP1 PCIe adapter, which is based
on an Oxford Semiconductor OX16PCI954 but uses only two ports and
a non-default clock rate. [1]
- Add entries for the more prominent members of the Digi International
Neo series, which are based on Exar PCI chips.
Tested by: Patrick Powell
- Mark some unused parameters as such.
- Fix style/whitespace
marius [Wed, 27 Jan 2016 22:48:04 +0000 (22:48 +0000)]
MFC: r294362, r294414, r294753
- Fix tty_drain() and, thus, TIOCDRAIN of the current tty(4) incarnation
to actually wait until the TX FIFOs of UARTs have be drained before
returning. This is done by bringing the equivalent of the TS_BUSY flag
found in the previous implementation back in an ABI-preserving way.
Reported and tested by: Patrick Powell
- Make the code consistent with itself style-wise and bring it closer
to style(9).
- Mark unused arguments as such.
- Make the ttystates table const.
marius [Wed, 27 Jan 2016 22:31:08 +0000 (22:31 +0000)]
Sync the e1000 drivers with what's in head as of r294327, modulo parts
that don't apply to stable/10 (driver API, if_inc_counter(), RSS changes
etc.) and modulo r287465 (which reportedly breaks igb(4)), i. e. assorted
fixes and improvements only:
o MFC r267385 (partial):
- Don't compare bus_dma map pointers for static DMA allocations against
NULL to determine if bus_dmamap_unload() or bus_dmamem_free() should be
called. Instead, check the associated bus and virtual addresses.
- Don't clear static DMA maps to NULL.
o MFC r284933:
Delete the refernce to VLAN handling being disabled by default. This is
no longer the case. [1]
o MFC r285639:
Add an adapter CORE lock in the DDB hook em_dump_queue to avoid WITNESS
panic in em_init_locked() while debugging.
o MFC r285879:
- Remove unused txd_saved.
- Intialize txd_upper, txd_lower and txd_used at declaration.
o MFC r286162:
Free mbufs when busdma loading fails.
o MFC r286829:
Add capability to disable CRC stripping as it breaks IPMI/BMC capabilities
on certain adatpers. [2]
o MFC r286831: [3]
- Increase EM_MAX_SCATTER to 64 such that the size of em_xmit()::
segs[EM_MAX_SCATTER] doesn't get overrun by things like NFS that can
and do shove more than 32 segs when being used with em(4) and TSO4.
- Update tso handling code in em_xmit() with update from jhb@
- Set if_hw_tsomax, if_hw_tsomaxsegcount and if_hw_tsomaxsegsize to
appropriate values.
- Define a TSO workaround "magic" number of 4 that is used to avoid an
alignment issue in hardware.
- Change a couple of integer values that were used as booleans to actual
bool types.
- Ensure that em_enable_intr() enables the appropriate mask of interrupts
and not just a hardcoded define of values.
o MFC r286832:
e1000/if_lem.c bump to 1.1.0
o MFC r286833:
Bump all copywrite dates to 2015.
o MFC r287112:
Style/whitespace cleanup in shared/common code.
o MFC r293331:
- Switch em(4) to the extended RX descriptor format.
- Split rxbuffer and txbuffer apart to support the new RX descriptor
format structures. Move rxbuffer manipulation to em_setup_rxdesc() to
unify the new behavior changes.
- Add a RSSKEYLEN macro for help in generating the RSSKEY data structures
in the card.
- Change em_receive_checksum() to process the new rxdescriptor format
status bit.
o MFC r293332:
Disable the reuse of checksum offload context descriptors in the case
of multiple queues in em(4). Document errata in the code.
o MFC r293854:
Given that em(4), lem(4) and igb(4) hardware doesn't require the
alignment guarantees provided by m_defrag(9), use m_collapse(9)
instead for performance reasons.
While at it, sanitize the statistics softc members, i. e. retire
unused ones and add SYSCTL nodes missing for actually used ones.
delphij [Wed, 27 Jan 2016 07:28:55 +0000 (07:28 +0000)]
MFC r294900:
Implement AT_SECURE properly.
AT_SECURE auxv entry has been added to the Linux 2.5 kernel to pass a
boolean flag indicating whether secure mode should be enabled. 1 means
that the program has changes its credentials during the execution.
Being exported AT_SECURE used by glibc issetugid() call.
sephe [Wed, 27 Jan 2016 05:19:05 +0000 (05:19 +0000)]
MFC r294557:
hyperv/stor: Verify returned inquiry data before further dispatching
Windows 10 and Window 2016 will return all zero inquiry data for
non-existing slots. If we dispatched them, then a lot of useless
(0 sized) disks would be created. So we verify the returned inquiry
data (valid type, non-empty vendor/product/revision etc.), before
further dispatching.
Minor white space cleanup and wording fix.
Submitted by: Hongjiang Zhang <honzhan microsoft com>
Reviewed by: adrian, sephe, Jun Su <junsu microsoft com>
Approved by: adrian (mentor)
Modified by: sephe
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D4928
r294548: Add scripts for watching common entry points.
r294549: Fix bad title on script (caused by copy/paste).
r294556: fbt -> syscall; fbt names changed to be sys_*
r294684: Bump copyright for change from fbt to syscall
asomers [Tue, 26 Jan 2016 20:45:41 +0000 (20:45 +0000)]
MFC r294347
Fix usr.bin.truncate.truncate_test.bad_truncate with ZFS /tmp.
The bad_truncate test sets the uimmutable flag to produce an error in
truncate, but that flag isn't supported by ZFS. If /tmp is on a ZFS
filesystem, the test will fail. Change it to use readonly permissions and
an unpriveleged user instead.
During vdev_geom_open, require that the vdev guids match the device's label
except during split, add, or create operations. This fixes a bug where the
wrong disk could be returned, and higher layers of ZFS would immediately
eject it again.
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/vdev_geom.c:
o When opening by GUID, require both the pool and vdev GUIDs to
match. While it is highly unlikely for two vdevs to have the same
vdev GUIDs, the ZFS storage pool allocator only guarantees they
are unique within a pool.
o Modify the open behavior to:
- If we are opening a vdev that hasn't previously been opened,
open by path without checking GUIDs.
- Otherwise, open by path and verify GUIDs.
- If that fails, search all geom providers for a device with
matching GUIDs.
- If that fails, return ENOENT.
After r292066, vdev_geom verifies both the vdev and pool guids of device
labels during open. However, spare and l2arc devices don't have pool guids,
so opening them by guid will fail (opening by path, when the pathname is
known, still succeeds). This change allows a vdev to be opened by guid if
the label contains no pool_guid, which is the case for inactive spares and
l2arc devices.
When a ZFS drive disappears, ZFS sends a resource.fs.zfs.removed event to
userland. A userland program like zfsd(8) can use that event, for example to
activate a hotspare. The current code contains a race condition: vdev_geom
will sent the sysevent _before_ spa.c would update the vdev's status,
causing userland processes to see pool state that does not reflect the
device removal. This change moves the sysevent to spa.c, closing the race.
smh [Mon, 25 Jan 2016 13:27:49 +0000 (13:27 +0000)]
MFC r293422 (partial):
Update generated EFI boot image templates.
This is a partial MFC as stable/10 only has EFI boot support for amd64,
and there are no plans to change this, so the other platform images
aren't included.
ian [Sun, 24 Jan 2016 22:17:05 +0000 (22:17 +0000)]
MFC r289477:
Fix a strange macro re-definition compile error. If the VM_MAXUSER_ADDRESS
value is defined as a config option the definition is emitted into
opt_global.h which is force-included into everything. In addition, the
symbol is emitted by the genassym mechanism, but that by its nature reduces
the value to a 0xnnnnnnnn number. When compiling a .S file you end up
with two different definitions of the macro (they evaluate to the same
number, but the text is different, upsetting the compiler).
ian [Sun, 24 Jan 2016 22:14:37 +0000 (22:14 +0000)]
MFC r293105:
Eliminate code for walking through the early static env data. This code
is called from a device attach routine, and thus cannot be called before
the cutover from static to dynamic kernel env.
ian [Sun, 24 Jan 2016 22:06:56 +0000 (22:06 +0000)]
MFC r294032:
Fix the handling of the "PDC write transfer length" erratum for at91. The
problem affects revision 1xx hardware as well as later versions. Also, the
recommended workaround is to set the PDC count register for a 12-byte
transfer when the actual size is less than that, but there is no need to
extend or zero-out the data buffer, because the blklen register contains
the real transfer size and only that many bytes will be transferred.
Also add a sysctl to turn debugging printfs on or off on the fly.
Use 64-bit math when finding a block of ram to hold the kernel. This fixes
a problem on 32-bit systems which have ram occupying the end of the physical
address space -- for example, a block of ram at 0x80000000 with a size of
0x80000000 was overflowing 32 bit math and ending up with a calculated size
of zero.
Use 64-bit math when processing the lists of physical and excluded memory
to generate the phys_avail and dump_avail arrays.
Work around problems that happen when there is ram at the end of the
physical address space.
Cast pointer through uintptr_t on the way to uint64_t to squelch a warning.
Reword the comment to better describe what I found while researching the
problem that led to this temporary workaround (and also so I can properly
cite the PR in the commit this time).
Cast using uintfptr_t and eliminate the cast to uint64_t which is uneeded
because rounding down cannot increase the number of bits needed to express
the result.
Go back to using uintptr_t, because code that actually compiles is
infinitely less buggy than code that is theoretically correct in some
alternate universe.
ian [Sun, 24 Jan 2016 21:04:06 +0000 (21:04 +0000)]
MFC r293045, r293046:
Make the 'env' directive described in config(5) work on all architectures,
providing compiled-in static environment data that is used instead of any
data passed in from a boot loader.
Previously 'env' worked only on i386 and arm xscale systems, because it
required the MD startup code to examine the global envmode variable and
decide whether to use static_env or an environment obtained from the boot
loader, and set the global kern_envp accordingly. Most startup code wasn't
doing so. Making things even more complex, some mips startup code uses an
alternate scheme that involves calling init_static_kenv() to pass an empty
buffer and its size, then uses a series of kern_setenv() calls to populate
that buffer.
Now all MD startup code calls init_static_kenv(), and that routine provides
a single point where envmode is checked and the decision is made whether to
use the compiled-in static_kenv or the values provided by the MD code.
The routine also continues to serve its original purpose for mips; if a
non-zero buffer size is passed the routine installs the empty buffer ready
to accept kern_setenv() values. Now if the size is zero, the provided buffer
full of existing env data is installed. A NULL pointer can be passed if the
boot loader provides no env data; this allows the static env to be installed
if envmode is set to do so.
Most of the work here is a near-mechanical change to call the init function
instead of directly setting kern_envp. A notable exception is in xen/pv.c;
that code was originally installing a buffer full of preformatted env data
along with its non-zero size (like mips code does), which would have allowed
kern_setenv() calls to wipe out the preformatted data. Now it passes a zero
for the size so that the buffer of data it installs is treated as
non-writeable.
Also, revert accidental change that snuck into r293045.
ian [Sun, 24 Jan 2016 20:15:52 +0000 (20:15 +0000)]
MFC r290647, r292523, r292891:
ARM: Improve robustness of locore_v6.S and fix errors.
- boot page table is not allocated in data section, so must be
cleared before use
- map only one section (1 MB) for SOCDEV mapping (*)
- DSB must be used for ensuring of finishing TLB operations
- Invalidate BTB when appropriate
Allow armv4/5 kernels to be loaded on any 2MB boundary, like armv6/7.
This eliminates the reliance on PHYSADDR and KERNPHYSADDR compile-time
symbols (except when the rom-copy code is enabled) by using the current
PC and the assumption that the entry-point routine is in the first 1MB
section of the text segment.
Other cleanups done:
- Reduce the initarm() stack size back to 2K. It got increased to
4 * 2K when this file was supporting multicore armv6, but that
support is now in locore-v6.S.
- When building the temporary startup page tables, map the entire
4GB address space as VA=PA before mapping the kernel at its loaded
location. This allows access to boot parameters stored somewhere
in ram by the bootloader, regardless of where that may be.
- When building the page table entry for supporting EARLY_PRINTF, map
the section as uncached unbuffered, since it is presumably device
registers.
Note that this restores the ability to use loader(8)/ubldr on armv4/5
kernels. That was broken in r283035, the point at which ubldr started
loading an arm kernel at any 2MB boundary.
Also note that after this, there is no reason to set KERNVIRTADDR to
anything other than 0xc0000000, and no need for PHYSADDR or KERNPHYSADDR
symbols at all.
Bring some of the recent locore-v4.S improvements into locore-V6...
- Map all 4GB as VA=PA so that args passed in from a bootloader can
be accessed regardless of where they are.
- Figure out the kernel load address by directly masking the PC rather
then by doing pc-relative math on the _start symbol.
- For EARLY_PRINTF support, map device memory as uncacheable (no-op for
ARM_NEW_PMAP because all TEX types resolve to uncacheable).
ian [Sun, 24 Jan 2016 19:41:31 +0000 (19:41 +0000)]
MFC r292752:
Enhance rc.d/netwait script to wait for late-attaching interfaces such as
USB NICs.
USB network hardware may not be enumerated and available when the rc.d
networking scripts run. Eventually the USB attachment completes and devd
events cause the network initialization to happen, but by then other rc.d
scripts have already failed, because services which depend on NETWORKING
(such as mountcritremote) may end up running before the network is actually
ready.
There is an existing netwait script, but because it is dependent on
NETWORKING it runs too late to prevent failure of some other rc
scripts. This change flips the order so that NETWORKING depends on netwait,
and netwait now depends on devd and routing (the former is needed to make
interfaces appear, and the latter is needed to run the ping tests in
netwait).
The netwait script used to be oriented primarily towards "as soon as any
host is reachable the network is fully functional", so you gave it a list of
IPs to try and you could optionally name an interface and it would wait for
carrier on that interface. That functionality still works the same, but now
you can provide a list of interfaces to wait for and it waits until each one
of them is available. The ping logic still completes as soon as the first IP
on the list responds.
These changes were submitted by Brenden Molloy <brendan+freebsd@bbqsrc.net>
in PR 205186, and lightly modified by me to allow a list of interfaces
instead of just one.
ian [Sun, 24 Jan 2016 19:34:05 +0000 (19:34 +0000)]
MFC r291149, r291367:
Update the imx5/imx6 cpu_reset() implementation based on a new understanding
of the SRS (software reset) bit in the watchdog control register. Despite
what the manual seems to imply, this bit DOES trigger an immediate reset, as
opposed to simply flagging the type of reset as software-triggered.
Rename sysctl node hw.imx6 to hw.imx. Move its definition to imx_machdep.c
so that code shared between imx5 and imx6 can work with OIDs under that node.
Add last_reset_status (integer) and last_reset_reason (string) OIDs that
provide info about the last chip reset (power-on, software reset, watchdog
timeout).
ian [Sun, 24 Jan 2016 19:21:53 +0000 (19:21 +0000)]
MFC r289618, r290316:
Fix printf format to allow for bus_size_t not being u_long on all platforms.
Fix an alignment check that is wrong in half the busdma implementations.
This will enable the elimination of a workaround in the USB driver that
artifically allocates buffers twice as big as they need to be (which
actually saves memory for very small buffers on the buggy platforms).
When deciding how to allocate a dma buffer, armv4, armv6, mips, and
x86/iommu all correctly check for the tag alignment <= maxsize as enabling
simple uma/malloc based allocation. Powerpc, sparc64, x86/bounce, and
arm64/bounce were all checking for alignment < maxsize; on those platforms
when alignment was equal to the max size it would fall back to page-based
allocators even for very small buffers.
This change makes all platforms use the <= check. It should be noted that
on all platforms other than arm[v6] and mips, this check is relying on
undocumented behavior in malloc(9) that if you allocate a block of a given
size it will be aligned to the next larger power-of-2 boundary. There is
nothing in the malloc(9) man page that makes that explicit promise (but the
busdma code has been relying on this behavior all along so I guess it works).
Arm and mips code uses the allocator in kern/subr_busdma_buffalloc.c, which
does explicitly implement this promise about size and alignment. Other
platforms probably should switch to the aligned allocator.
ian [Sun, 24 Jan 2016 18:54:55 +0000 (18:54 +0000)]
MFC r289727:
Add FDT compatibility to the icee driver.
The FDT bindings for eeprom parts don't include any metadata about the
device other than the part name encoded in the compatible property.
Instead, a driver is required to have a compiled-in table of information
about the various parts (page size, device capacity, addressing scheme). So
much for FDT being an abstract description of hardware characteristics, huh?
In addition to the FDT-specific changes, this also switches to using the
newer iicbus_transfer_excl() mechanism which holds bus ownership for the
duration of the transfer. Previously this code held the bus across all
the transfers needed to complete the user's IO request, which could be
up to 128KB of data which might occupy the bus for 10-20 seconds. Now the
bus will be released and re-aquired between every page-sized (8-256 byte)
transfer, making this driver a much nicer citizen on the i2c bus.
The hint-based configuration mechanism is still in place for non-FDT systems.
ian [Sun, 24 Jan 2016 18:54:11 +0000 (18:54 +0000)]
MFC r289726:
Add iicbus_transfer_excl(), a helper routine to do an i2c bus transaction
while holding exclusive ownership of the bus. This is the routine most
slave drivers should use unless they have a need to acquire and hold the
bus across a series of related operations that involves multiple transfers.
ian [Sun, 24 Jan 2016 18:50:37 +0000 (18:50 +0000)]
MFC r289704:
Fix parsing of I2C addresses properties in fdt data. I2C address is
represented in 7-bits format in DT files, but system expect it in 8-bit
format. Also, fix two drivers that locally hack around this bug.
This includes a direct-commit change to the beaglebone dts data in the
10-stable branch to adjust the i2c slave addresses directly. In -current
the equivelent change happened with a switch from homegrown to standard
fdt data.
ngie [Sun, 24 Jan 2016 06:19:49 +0000 (06:19 +0000)]
MFC r293073:
- Use attach_md instead of hardcoding md(4) provider unit numbers
- Implement a gmirror_test_cleanup function, which in turn calls
geom_test_cleanup to clean up all md(4) providers allocated in the test
run.
- Remove duplicate logic in test scripts for removing md(4) providers.
- Don't create files in /tmp (outside the kyua sandbox); use the current
directory instead
vangyzen [Sun, 24 Jan 2016 02:10:05 +0000 (02:10 +0000)]
MFC r293860
bsdinstall: Suggest the GPT+Active workaround on Dell T5810
The Dell Precision Tower 5810 fails to boot from GPT in Legacy/BIOS mode
without the Active flag in the Protective MBR. Suggest the workaround
during installation.
Since an increasing number of Dell systems exhibit this behavior,
I imagine all Dells past a certain date will do so. I would like
to suggest the workaround for all Dells with a BIOS date of, say,
2014 or later, but I would need to test a variety of systems before
committing such a change.
Relnotes: We should probably suggest using GPT+Active on "recent" Dells.
Sponsored by: Dell Inc.
ngie [Sat, 23 Jan 2016 21:04:34 +0000 (21:04 +0000)]
MFC r294125:
Test for EPROTOTYPE not EPROTONOSUPPORT
- `SOCK_RAW` is the implied supported type parameter for socket(2) per route(4)
- localsw in `sys/kern/uipc_usrreq.c` doesn't have an entry for `SOCK_RAW`, so
the prototype is invalid (this isn't explicitly documented anywhere I could
find)
ian [Sat, 23 Jan 2016 19:13:48 +0000 (19:13 +0000)]
MFC r294235:
Make PPS ASSERT/CLEAR events match the RS-232 signal levels as per RFC 2783.
Previously the polarity was for TTL levels, which are the reverse of RS-232.
Also add handling of the UART_PPS_INVERT_PULSE option bit in the sysctl
value, the same as was recently added to uart(4), so that people using TTL
level connections can request a logical inverting of the signal.
Use the named constants from the new dev/uart/uart_ppstypes.h for the pps
capture modes and option bits.
jhb [Sat, 23 Jan 2016 17:08:17 +0000 (17:08 +0000)]
MFC 294366:
Initialize vm_page_prot to VM_MEMATTR_DEFAULT instead of 0.
If a driver's Linux mmap callback passed vm_page_prot through unchanged,
then linux_dev_mmap_single() would try to apply whatever VM_MEMATTR_xxx
value 0 is to the mapping. On x86, VM_MEMATTR_DEFAULT is the PAT value
for write-back (WB) which is 6, while 0 maps to the PAT value for
uncacheable (UC). Thus, any mmap request that did not explicitly set
page_prot was tried to map memory as UC triggering the warning in
sg_pager_getpages().