Ed Maste [Sun, 7 Jun 2020 00:07:21 +0000 (00:07 +0000)]
Retire BINUTILS and BINUTILS_BOOTSTRAP options
As of r361857 all BINUTILS options are disabled by default - ports
have been changed to depend on binutils if they require GNU as, and
all base system assembly files have been switched to use Clang's
integrated assembler.
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Adrian Chadd [Sat, 6 Jun 2020 22:25:00 +0000 (22:25 +0000)]
[net80211] Flip on A-MPDU, A-MSDU, A-MPDU+A-MSDU and Fast frames options.
This updates the logic to allow:
* A-MPDU if available;
* A-MSDU if available and A-MPDU is off/NACKed;
* A-MPDU+A-MSDU if it's available and negotiated;
* Fast frames if the node is 11abg (and not HT/VHT.)
This allows for things to fail back to A-MSDU or fast frames
if A-MPDU isn't available rather than needing to be non-HT/non-VHT.
It also allows A-MPDU+A-MSDU to work if it's negotiated.
Tested:
* AR9380, STA + AP mode (A-MPDU, A-MSDU, FF, A-MPDU+A-MSDU)
* RT5350, STA mode (A-MSDU, FF)
* AR9170, STA mode (A-MSDU, FF)
Kirk McKusick [Sat, 6 Jun 2020 20:17:56 +0000 (20:17 +0000)]
Clear the IN_SIZEMOD and IN_IBLKDATA flags only when doing a
synchronous inode update.
The IN_SIZEMOD and IN_IBLKDATA flags indicate changes to the
file size and block pointer fields in the inode. When these
fields have been changed, the fsync() and fsyncdata() system
calls must write the inode to ensure their semantics that the
file is on stable store.
The IN_SIZEMOD and IN_IBLKDATA flags cannot be cleared until
a synchronous write of the inode is done. If they are cleared
on an asynchronous write, then the inode may not yet have been
written to the disk when an fsync() or fsyncdata() call is done.
Absent these flags, these calls would not know that they needed
to write the inode. Thus, these flags only can be cleared on
synchronous writes of the inode. Since the inode will be locked
for the duration of the I/O that writes it to disk, no fsync()
or fsyncdata() will be able to run before the on-disk inode
is complete.
Warner Losh [Sat, 6 Jun 2020 18:43:08 +0000 (18:43 +0000)]
Add a section on CAM architecture.
Add xref to all SIM devices we currently have (including a rough indication
which ones are likely to fail).
Update to include all the CAM options.
Fix a few igor nits while I'm here.
Warner Losh [Sat, 6 Jun 2020 06:21:20 +0000 (06:21 +0000)]
Document all the sysctl values for the nda devices. Include some minimal
documentation on namespace support for nda devices. Fix a few typos
and formatting nits to apease igor.
Warner Losh [Sat, 6 Jun 2020 06:21:15 +0000 (06:21 +0000)]
Add a tunable for the nvd symlink creation.
Some automation tries to detect if nvd or nda is in used, and the presence of
both confuses it. Provide a knob to turn off nvd alias creation
(kern.cam.nda.nvd_compat=0) for these situations. The default is the same:
create the nvd compat link.
Justin Hibbits [Sat, 6 Jun 2020 03:09:12 +0000 (03:09 +0000)]
powerpc: Use IFUNCs for copyin/copyout/etc
Summary:
Radix on AIM, and all of Book-E (currently), can do direct addressing of
user space, instead of needing to map user addresses into kernel space.
Take advantage of this to optimize the copy(9) functions for this
behavior, and avoid effectively NOP translations.
Test Plan: Tested on powerpcspe, powerpc64/booke, powerpc64/AIM
Justin Hibbits [Sat, 6 Jun 2020 02:40:52 +0000 (02:40 +0000)]
powerpc: Add a (CPU/runtime features) flags set to pcpu struct
Summary:
The point of this addition is to cache CPU behavior 'features', to avoid
having to recompute based on CPU, etc.
The first such use case is to avoid the unnecessary manipulation of the
SLBs (Segment Lookaside Buffers) when using the Radix pmap on POWER9.
Since we already get the PCPU pointer wherever we swap the SLB entries,
we can use a cached flag to check if it's necessary to perform the
operation anyway, and skip it when not.
Chuck Silvers [Sat, 6 Jun 2020 00:47:59 +0000 (00:47 +0000)]
Don't mark pages as valid if reading the contents from disk fails.
Instead, just skip marking pages valid if the read fails. Future
attempts to access such pages will notice that they are not marked valid
and try to read them from disk again.
Rick Macklem [Sat, 6 Jun 2020 00:40:02 +0000 (00:40 +0000)]
Fix mountd so that it will not lose SIGHUPs that indicate "reload exports".
Without this patch, if a SIGHUP is handled while the process is executing
get_exportlist(), that SIGHUP is essentially ignored because the got_sighup
variable is reset to 0 after get_exportlist().
This results in the exports file(s) not being reloaded until another SIGHUP
signal is sent to mountd.
This patch fixes this by resetting got_sighup to zero before the
get_exportlist() call while SIGHUP is blocked.
It also defines a delay time of 250msec before doing another exports reload
if there are RPC request(s) to process. This prevents repeated exports reloads
from delaying handling of RPC requests significantly.
That is, GNU as and Clang's integrated assembler use different multi-
byte NOPs for alignment (GNU as emits an 11 byte NOP + a 3 byte NOP,
while Clang IAS emits a 10 byte NOP + a 4 byte NOP).
Dependency cleanup hacks are not required, because we do not create
.depend files from GNU as.
Reviewed by: allanjude, arichardson, cem, tsoome
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D8434
Chuck Silvers [Sat, 6 Jun 2020 00:02:50 +0000 (00:02 +0000)]
Fix hang due to missing unbusy in sendfile when an async data I/O fails.
r359473 removed the page unbusy logic from sendfile_iodone() because when
vm_pager_get_pages_async() would return an error after failing to start
the async I/O (eg. because VOP_BMAP failed), sendfile_swapin() would also
unbusy the pages, and it was wrong to unbusy twice. However this breaks
the case where vm_pager_get_pages_async() succeeds in starting an async I/O
and the async I/O is what fails. In this case, sendfile_iodone() must
unbusy the pages, and because sendfile_iodone() doesn't know which case
it is in, sendfile_iodone() must always unbusy pages and relookup pages
which have been substituted with bogus_page, which in turn means that
sendfile_swapin() must never do unbusy or relookup for pages which have
been given to vm_pager_get_pages_async(), even if there is an error.
Conrad Meyer [Fri, 5 Jun 2020 16:12:21 +0000 (16:12 +0000)]
geom_label: Use provider aliasing to alias upstream geoms
For synthetic aliases (just pseudonyms inferred from metadata like GPT or
UFS labels, GPT UUIDs, etc), use the GEOM provider aliasing system to create
a symlink to the real device instead of creating an independent device.
This makes it more clear which labels and devices correspond, and we can
safely have multiple labels to a single device accessed at once.
The confusingly named geom_label on-disk construct continues to behave
identically to how it did before.
This requires teaching GEOM's provider aliasing about the possibility
that aliases might be added later in time, and GEOM's devfs interaction
layer not to worry about existing aliases during retaste.
Discussed with: imp
Relnotes: sure, if we don't end up reverting it
Differential Revision: https://reviews.freebsd.org/D24968
Alex Richardson [Fri, 5 Jun 2020 13:54:13 +0000 (13:54 +0000)]
Allow assembling skein_block_asm.s with clang
GNU as seems to allow macro arguments without the '\' but clang is more
strict in that regard.
This change makes the source code compatible with LLVM's but does not yet
change the build system or rename it to .S.
The new code assembles identically with GNU as 2.17.50.
Alex Richardson [Fri, 5 Jun 2020 08:46:55 +0000 (08:46 +0000)]
csu: Avoid additional nops in the MIPS INIT_CALL_SEQ macro
Since we had a .set reorder, the nop after the "jal" was being placed after
the delay slot, resulting in two nops.
While changing this code also guard the .set noreorder with .set push/pop
and use $zero as the cpsetup save register since we don't need to save $gp.
Alex Richardson [Fri, 5 Jun 2020 08:46:50 +0000 (08:46 +0000)]
Avoid using non-portable dd status=none flag
Copying the approach chosen in r309412. This fixes building the libc tests
on a macOS host since the macOS /bin/dd binary does not support status=none.
As there only seem to be two uses, this commit changes the two Makefiles.
If this becomes more common, we could also add a wrapper bootstrap script
that ignores status= and forwards the remaining args to the real dd.
Another alternative would be to remove the status flag and pipe stderr to
/dev/null, but them we lose error messages.
Ensure pci_channel_offline() actually queries the PCI register space,
and not only the software cache of that register. Else
pci_channel_offline() won't detect that the PCI device is gone when
using the LinuxKPI.
USB HID descriptors may push/pop the current state to allow
description of items residing in a so-called union. FreeBSD currently
only supports 4 such pop levels.
If the push level is not restored within the processing of the same
HID item, an invalid memory location may be used for subsequent HID
item processing.
Verify that the push level is always valid when processing HID items.
Reported by: Andy Nguyen (Google)
MFC after: 3 days
Sponsored by: Mellanox Technologies
Adrian Chadd [Fri, 5 Jun 2020 07:38:10 +0000 (07:38 +0000)]
[net80211] Add initial A-MSDU in A-MPDU negotation support.
This is hopefully a big no-op unless you're running some extra
patches to flip on A-MSDU options in a driver.
802.11n supports sending A-MSDU in A-MPDU. That lets you do things
like pack small frames into an A-MSDU and stuff /those/ into an A-MPDU.
It allows for much more efficient airtime because you're not
wasting time sending small frames - which is still a problem when
doing A-MPDU as there's still per-frame overhead and minimum A-MPDU
density requirements.
It, however, is optional for 802.11n. A lot of stuff doesn't advertise
it (but does it, just wait!); and I know that ath10k does it and my
ath(4) driver work supports it.
Now, 802.11ac makes A-MSDU in A-MPDU something that can happen more
frequently, because even though you can send very large A-MPDUs
(like 1 megabyte and larger) you still have the small frame problem.
So, 802.11ac NICs like ath10k and iwm will support A-MSDU in A-MPDU
out of the box if it's enabled - and you can negotiate it.
So, let's lay down the ground work to enable A-MSDU in A-MPDU.
This will allow hardware like iwn(4) and ath(4) which supports
software A-MSDU but hardware A-MPDU to be more efficient.
Drivers that support A-MSDU in A-MPDU will set TX/RX htcap flags.
Note this is separate from the software A-MSDU encap path; /that/
dictates whether net80211 is doing A-MSDU encapsulation or not.
These HTC flags control negotiation, NOT encapsulation.
Once this negotiation and driver bits are done, hardware like
rtwn(4), run(4), and others will be able to use A-MSDU even without
A-MPDU working; right now FF and A-MSDU aren't even attempted
if you're an 11n node. It's a small hold-over from the initial
A-MPDU work and I know how to fix it, but to flip it on properly
I need to be able to negotiate or ignore A-MSDU in A-MPDU.
Oh and the fun part - some 11ac APs I've tested will quite happily
decap A-MSDU in A-MPDU even though they don't negotiate it when
doing 802.11n. So hey, I know it works - I just want to properly
handle things. :-)
Adrian Chadd [Fri, 5 Jun 2020 06:21:23 +0000 (06:21 +0000)]
[net80211] Migrate short slot time configuration into per-vap and deferred taskqueue updates.
The 11b/11g ERP and slot time update handling are two things which weren't
migrated into the per-VAP state when Sam did the initial VAP work.
That makes sense for a lot of setups where net80211 is driving radio state
and the radio only cares about the shared state.
However, as noted by a now deleted comment, the ERP and slot time updates
aren't EXACTLY correct/accurate - they only take into account the most
RECENTLY created VAP, and the state updates when one creates/destroys
VAPs isn't exactly great.
So:
* track the short slot logic per VAP;
* whenever the slot time configuration changes, just push it into a deferred
task queue update so drivers don't have to serialise it themselves;
* if a driver registers a per-VAP slot time handler then it'll just get the
per VAP one;
* .. if a driver registers a global one then the legacy behaviour is maintained -
a single slot time is calculated and pushed out.
Note that the calculated slot time is better than the existing logic - if ANY
of the VAPs require long slot then it's disabled for all VAPs rather than
whatever the last configured VAP did.
Now, this isn't entirely complete - the rest of ERP tracking around short/long
slot capable station tracking needs to be converted into per-VAP, as well
as the preamble/barker flags. Luckily those also can be done in a similar
fashion - keep per-VAP counters/flags and unify them before doing the driver
update. I'll defer that work until later.
All the existing drivers can keep doing what they're doing with the global
slot time flags as that is maintained. One driver (iwi) used the per-VAP
flags instead of the ic flags, so now that driver will work properly.
This unblocks some ath10k porting work as the firmware takes the slot time
configuration per-VAP rather than globally, and some firmware handles
STA+AP and STA+STA (on same/different channels) configurations where
the firmware will switch slot time as appropriate.
Adrian Chadd [Fri, 5 Jun 2020 06:07:23 +0000 (06:07 +0000)]
[net80211] Add some TODOs around A-MSDU in A-MPDU negotiation.
net80211 currently doesn't negotiate A-MSDU in A-MPDU during ADDBA.
I've added the field in net80211 and this commit:
* Prints out the ADDBA field value during ADDBA;
* Adds some comments around where I need to follow up with some
negotiation logic.
Right now we don't have a driver flag anywhere which controls
whether A-MSDU in A-MPDU is allowed. I know it works (I have it
manually turned on at home on a couple test APs, heh!) but
I can't flip it on until we can negotiate it.
Tested:
* AR9380, STA/AP mode, printing out ADDBA requests
Adrian Chadd [Fri, 5 Jun 2020 04:24:34 +0000 (04:24 +0000)]
[iwn] Set default ampdu parameters.
These are from the linux iwlwifi driver ;the default use smaller
maximum AMPDUs (8k) and a much smaller density (none.) The latter
could cause stability issues.
Adrian Chadd [Fri, 5 Jun 2020 04:04:47 +0000 (04:04 +0000)]
[net80211] Add field definition for A-MSDU inside A-MPDU.
Now that I have A-MSDU and A-MPDU coexisting together, we need to actually
announce if (a) it's permitted and (b) figure out if we should use it
when transmitting.
This just adds the field; it doesn't yet include it in ADDBA exchanges.
Alexander Motin [Fri, 5 Jun 2020 02:21:46 +0000 (02:21 +0000)]
Limit AHCI to only one MSI if more is not needed.
My AMD Ryzen system has 4 AHCI controllers, each supporting 16 MSI vectors.
Since two of the controllers have only one SATA port, limit to single MSI
saves system 30 interrupt vectors for free.
It may be possible to also limit number of MSI vectors to 4 and 8 for the
other two controllers, but according to the AHCI specification after that
controllers may revert to only one vector, that would be a bigger loss to
risk.
Kirk McKusick [Fri, 5 Jun 2020 01:00:55 +0000 (01:00 +0000)]
Further evaluation of the POSIX spec for fdatasync() shows that it
requires that new data on growing files be accessible. Thus, the
the fsyncdata() system call must update the on-disk inode when the
size of the file has changed.
This commit adds another inode update flag, IN_SIZEMOD, that gets
set any time that the file size changes. If either the IN_IBLKDATA
or the IN_SIZEMOD flag is set when fdatasync() is called, the
associated inode is synchronously written to disk. We could have
overloaded the IN_IBLKDATA flag to also track size changes since
the only (current) use case for these flags are for fsyncdata(),
but it does seem useful for possible future uses to separately
track the file size changes and the inode block pointer changes.
Adrian Chadd [Fri, 5 Jun 2020 00:16:54 +0000 (00:16 +0000)]
[net80211] Add some more debugging during scanning
I'm trying to chase down more weird "I am not doing an incremental scan
when being asked" issues so these debugging statements help.
Notably, I've added more debugging around reasons why the scan is skipped -
eg because the cache is considered hot.
This should be a no-op unless you care about the debugging output!
Adrian Chadd [Fri, 5 Jun 2020 00:11:44 +0000 (00:11 +0000)]
[net80211] Send a probe request after IBSS node discovery
This sends a probe request after IBSS node discovery through
beacon frames. This allows things like HT and VHT capabilities
to be "negotiated" in adhoc mode.
It is .. kinda fire and pray - this isn't retried after discovery
so it's quite possible that nodes occasionally don't come up with
HT/VHT rate upgrades. At some point it may be a fun side project
to add support for retrying these probe requests/negotiations
after IBSS node discovery.
Mitchell Horne [Thu, 4 Jun 2020 20:48:57 +0000 (20:48 +0000)]
Document upgrade procedure in FREEBSD-upgrade
It was pointed out to me that this is the convention for documenting upgrade
instructions, rather than just leaving the instructions in the commit message.
It's possible these commands won't be used again before we transition to git,
but then at least they'll give a path forward for whoever touches this next.
FreeBSD DD utility has not had support for the O_DIRECT flag, which
is useful to bypass local caching, e.g. for unconditionally issuing
NFS IO requests during testing.
Eric Joyner [Thu, 4 Jun 2020 20:39:28 +0000 (20:39 +0000)]
em(4): Add support for Comet Lake Mobile Platform, update shared code
This change introduces Comet Lake Mobile Platform support in the e1000
driver along with shared code patches described below.
- Cast return value of e1000_ltr2ns() to higher type to avoid overflow
- Remove useless statement of assigning act_offset
- Add initialization of identification LED
- Fix flow control setup after connected standby:
After connected standby the driver blocks resets during
"AdapterStart" and skips flow control setup. This change adds
condition in e1000_setup_link_ich8lan() to always setup flow control
and to setup physical interface only when there is no need to block
resets.
John Baldwin [Thu, 4 Jun 2020 20:12:34 +0000 (20:12 +0000)]
Use separate output buffers for OCF requests in KTLS.
KTLS encryption requests for file-backed data such as from sendfile(2)
require the encrypted data to be stored in a separate buffer from the
unencrypted file input data. Previously the OCF backend for KTLS
manually copied the data from the input buffer to the output buffer
before queueing the crypto request. Now the OCF backend will use a
separate output buffer for such requests and avoid the copy. This
mostly helps when an async co-processor is used by saving CPU cycles
used on the copy.
Mitchell Horne [Thu, 4 Jun 2020 19:21:41 +0000 (19:21 +0000)]
Update edk2 headers to stable202005
We use these to compile libefivar. The particular motivation for this update is
the inclusion of the RISC-V machine definitions that allow us to build the
library on the platform. This support could easily have been submitted as a
small local diff, but the timing of the release coincided with this work, and
it has been over 3 years since these sources were initially imported.
Note that this comes with a license change from regular BSD 2-clause to the
BSD+Patent license. This has been approved by core@ for this particular
project [1].
As with the original import, we retain only the subset of headers that we
actually need to build libefivar. I adapted imp@'s process slightly for this
update:
# Generate list of the headers needed to build
cp -r ../vendor/edk2/dist/MdePkg/Include sys/contrib/edk2
cd lib/libefivar
make
pushd `make -V .OBJDIR`
cat .depend*.o | grep sys/contrib | cut -d' ' -f 3 |
sort -u | sed -e 's=/full/path/sys/contrib/edk2/==' > /tmp/xxx
popd
# Merge the needed files
cd ../../sys/contrib/edk2
svn revert -R .
for i in `cat /tmp/xxx`; do
svn merge -c VendorRevision svn+ssh://repo.freebsd.org/base/vendor/edk2/dist/MdePkg/$i $i
done
svn merge -c VendorRevision svn+ssh://repo.freebsd.org/base/vendor/edk2/dist/MdePkg/MdePkg.dec MdePkg.dec
Kyle Evans [Thu, 4 Jun 2020 18:17:25 +0000 (18:17 +0000)]
vfs: add restrictions to read(2) of a directory [2/2]
This commit adds the priv(9) that waters down the sysctl to make it only
allow read(2) of a dirfd by the system root. Jailed root is not allowed, but
jail policy and superuser policy will abstain from allowing/denying it so
that a MAC module can fully control the policy.
Such a MAC module has been written, and can be found at:
https://people.freebsd.org/~kevans/mac_read_dir-0.1.0.tar.gz
It is expected that the MAC module won't be needed by many, as most only
need to do such diagnostics that require this behavior as system root
anyways. Interested parties are welcome to grab the MAC module above and
create a port or locally integrate it, and with enough support it could see
introduction to base. As noted in mac_read_dir.c, it is released under the
BSD 2 clause license and allows the restrictions to be lifted for only
jailed root or for all unprivileged users.
Kyle Evans [Thu, 4 Jun 2020 18:09:55 +0000 (18:09 +0000)]
vfs: add restrictions to read(2) of a directory [1/2]
Historically, we've allowed read() of a directory and some filesystems will
accommodate (e.g. ufs/ffs, msdosfs). From the history department staffed by
Warner: <<EOF
pdp-7 unix seemed to allow reading directories, but they were weird, special
things there so I'm unsure (my pdp-7 assembler sucks).
1st Edition's sources are lost, mostly. The kernel allows it. The
reconstructed sources from 2nd or 3rd edition read it though.
V6 to V7 changed the filesystem format, and should have been a warning, but
reading directories weren't materially changed.
4.1b BSD introduced readdir because of UFS. UFS broke all directory reading
programs in 1983. ls, du, find, etc all had to be rewritten. readdir() and
friends were introduced here.
SysVr3 picked up readdir() in 1987 for the AT&T fork of Unix. SysVr4 updated
all the directory reading programs in 1988 because different filesystem
types were introduced.
In the 90s, these interfaces became completely ubiquitous as PDP-11s running
V7 faded from view and all the folks that initially started on V7 upgraded
to SysV. Linux never supported this (though I've not done the software
archeology to check) because it has always had a pathological diversity of
filesystems.
EOF
Disallowing read(2) on a directory has the side-effect of masking
application bugs from relying on other implementation's behavior
(e.g. Linux) of rejecting these with EISDIR across the board, but allowing
it has been a vector for at least one stack disclosure bug in the past[0].
By POSIX, this is implementation-defined whether read() handles directories
or not. Popular implementations have chosen to reject them, and this seems
sensible: the data you're reading from a directory is not structured in some
unified way across filesystem implementations like with readdir(2), so it is
impossible for applications to portably rely on this.
With this patch, we will reject most read(2) of a dirfd with EISDIR. Users
that know what they're doing can conscientiously set
bsd.security.allow_read_dir=1 to allow read(2) of directories, as it has
proven useful for debugging or recovery. A future commit will further limit
the sysctl to allow only the system root to read(2) directories, to make it
at least relatively safe to leave on for longer periods of time.
While we're adding logic pertaining to directory vnodes to vn_io_fault, an
additional assertion has also been added to ensure that we're not reaching
vn_io_fault with any write request on a directory vnode. Such request would
be a logical error in the kernel, and must be debugged rather than allowing
it to potentially silently error out.
Commented out shell aliases have been placed in root's chsrc/shrc to promote
awareness that grep may become noisy after this change, depending on your
usage.
A tentative MFC plan has been put together to try and make it as trivial as
possible to identify issues and collect reports; note that this will be
strongly re-evaluated. Tentatively, I will MFC this knob with the default as
it is in HEAD to improve our odds of actually getting reports. The future
priv(9) to further restrict the sysctl WILL NOT BE MERGED BACK, so the knob
will be a faithful reversion on stable/12. We will go into the merge
acknowledging that the sysctl default may be flipped back to restore
historical behavior at *any* point if it's warranted.
Conrad Meyer [Thu, 4 Jun 2020 16:04:19 +0000 (16:04 +0000)]
Restrict default /root permissions
Remove world-readability from the root directory. Sensitive information may be
stored in /root and we diverge here from normative administrative practice, as
well as installation defaults of other Unix-alikes. The wheel group is still
permitted to read the directory.
750 is no more restrictive than defaults for the rest of the open source
Unix-alike world. In particular, Ben Woods surveyed DragonFly, NetBSD,
OpenBSD, ArchLinux, CentOS, Debian, Fedora, Slackware, and Ubuntu. None have a
world-readable /root by default.
Eugene Grosbein [Thu, 4 Jun 2020 14:44:44 +0000 (14:44 +0000)]
ifconfig(8): make it possible to filter output by interface group.
Now options -g/-G allow to select/unselect interfaces by groups
in the "ifconfig -a" output just like already existing -d/-u.
Examples:
to exclude loopback from the list: ifconfig -a -G lo
to show vlan interfaces only: ifconfig -a -g vlan
to show tap interfaces that are up: ifconfig -aug tap
Arguments to -g/-G may be shell patterns and both may be specified.
Later options -g/-G override previous ones.
The rule 5 matches nothing without the fix if n>=32769.
With the fix, it works:
# telnet localhost 10001
Trying 127.0.0.1...
telnet: connect to address 127.0.0.1: Permission denied
telnet: Unable to connect to remote host
Andriy Gapon [Thu, 4 Jun 2020 13:18:21 +0000 (13:18 +0000)]
superio: do not assume that current LDN cannot change after config exit
That assumption should be true when superio(4) uses the hardware
exlusively. But it turns out to not hold on some real systems.
So, err on the side of correctness rather than performance.
Clear current_ldn in sio_conf_exit.
Andriy Gapon [Thu, 4 Jun 2020 13:06:49 +0000 (13:06 +0000)]
ifconfig.8: fix cpability and flag descriptions for list scan / sta
Some capability descriptions under list scan actually described flags.
Some capability descriptions were missing.
Some flag descriptions under list sta actually described capabilites.
Reviewed by: adrian
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D25014
UFS: write inode block for fdatasync(2) if pointers in inode where allocated
The fdatasync() description in POSIX specifies that
all I/O operations shall be completed as defined for synchronized I/O
data integrity completion.
and then the explanation of Synchronized I/O Data Integrity Completion says
The write is complete only when the data specified in the write
request is successfully transferred and all file system
information required to retrieve the data is successfully
transferred.
For UFS this means that all pointers must be on disk. Indirect
pointers already contribute to the list of dirty data blocks, so only
direct blocks and root pointers to indirect blocks, both of which
reside in the inode block, should be taken care of. In ffs_balloc(),
mark the inode with the new flag IN_IBLKDATA that specifies that
ffs_syncvnode(DATA_ONLY) needs a call to ffs_update() to flush the
inode block.
Reviewed by: mckusick
Discussed with: tmunro
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D25072
Rick Macklem [Thu, 4 Jun 2020 00:28:20 +0000 (00:28 +0000)]
Fix mountd to handle getgrouplist() not returning groups[0] == groups[1].
Prior to r174547, getgrouplist(3) always returned a groups list with
element 0 and 1 set to the basegid argument, so long as ngroups was > 1.
Post-r174547 this is not the case. r328304 disabled the deduplication that
removed the duplicate, but the duplicate still does not occur unless the
group for a user in the password database is also entered in the group
database.
This patch fixes mountd so that it handles the case where a user specified
with the -maproot or -mapall exports option has a getgrouplist(3) groups
list where groups[0] != groups[1].
Found while testing another mountd patch.
Adrian Chadd [Wed, 3 Jun 2020 22:30:44 +0000 (22:30 +0000)]
[run] Fix up tx/rx frame size.
This specifically fixes that TX frames are large enough now to hold a 3900 odd
byte AMSDU (the little ones); me flipping it on earlier messed up transmit!
Tested:
* if_run, STA mode, TX/RX TCP/UDP iperf. TCP is now back to normal and
correctly does ~ 3200 byte AMSDU/fast frames (2x1600ish byte MSDUs).
Adrian Chadd [Wed, 3 Jun 2020 20:25:02 +0000 (20:25 +0000)]
[otus] enable 802.11n for 2GHz and 5GHz.
This flips on basic 11n for 2GHz/5GHz station operation.
* It flips on HT20 and MCS rates;
* It enables A-MPDU decap - the payload format is a bit different;
* It does do some basic checks for HT40 but I haven't yet flipped on
HT40 support;
* It enables software A-MSDU transmit; I honestly don't want to make
A-MPDU TX work and there are apparently issues with QoS and A-MPDU TX.
So I totally am ignoring A-MPDU TX;
* MCS rate transmit is fine.
I haven't:
* A-MPDU TX, as I said above;
* made radiotap work fully;
* HT40;
* short-GI support;
* lots of other stuff that honestly no-one is likely to use.
But! Hey, this is another ye olde 11n USB NIC that now works pretty OK
in 11n rates. A-MPDU receive seems fine enough given it's a draft-n
device from before 2010.
Tested:
* Ye olde UB82 Test NIC (AR9170 + AR9104) - 2GHz/5GHz
Kyle Evans [Wed, 3 Jun 2020 18:29:32 +0000 (18:29 +0000)]
lualoader: drop the filename and word "LUA" from errors
The filename is nearly always wrong since it's /boot/lua/loader.lua, which
is not useful for diagnostics. The actual errmsg will include a lua filename
if this is relevant.
Dropping "LUA" while we're here because that's almost universally
irrelevant to whatever error follows, unless the error states that it's
actually a lua problem.
Both of these are minor nits that just detract from identifying the
pertinent information.
This change prevents a race that happens when rxsync dequeues
N-1 rx packets (with N being the size of the netmap rx ring).
In this situation, the loop exits without re-enabling the
rx interrupts, thus causing the VQ to stall.
projects / FreeBSD / FreeBSD.git / log