Implement the G_PART_DUMPCONF method for all 6 schemes. Also call
the method for the (indent == NULL) case (i.e. the kern.geom.conftxt
sysctl). The purpose is to extend the conftxt output with scheme-
specific fields which can be used by libdisk. In particular, have
the schemes dump the xs and xt fields, which contain the backward
compatible values for class type and partition type. This allows
libdisk to work with the legacy slicers as well as with gpart and
helps/promotes migration.
marius [Wed, 23 Apr 2008 20:04:38 +0000 (20:04 +0000)]
o Rename ic_eoi to ic_clear to emphasize the functions it points
don't send and EOI which works like on amd64/i386 and blocks all
interrupts on the relevant interrupt controller.
o Replace the post_filter and post_inthread hooks registered when
creating the interrupt events with just ic_clear as on sparc64 we
don't need to do any disable->EOI->enable dance to unblock all but
the relevant interrupt while running the filter or handler; just
not clearing the interrupt already has the same effect.
o Merge from amd64/i386:
- Split the intr_table_lock into an sx lock used for most things,
and a spin lock to protect intrcnt_index.
- Add support for binding interrupts to CPUs, including for the
bus_bind_intr(9) interface, a assign_cpu hook and initially
shuffling interrupts arround in a round-robin fashion.
Implement red-black trees without using parent pointers, and store the
color bit in the least significant bit of the right child pointer, in
order to reduce red-black tree linkage overhead by ~2X as compared to
sys/tree.h.
Use the new red-black tree implementation in malloc, which drops
memory usage by ~0.5 or ~1%, for 32- and 64-bit systems, respectively.
Add four utility functions related to struct grp processing modeled in-part
after similar calls related to struct pwd in libutil/pw_util.c:
- gr_equal()
Perform a deep comparison of two struct grp's. It does a thorough, yet
unoptimized comparison of all the members regardless of order.
- gr_make()
Create a string (see group(5)) from a struct grp.
- gr_dup()
Duplicate a struct grp. Returns a value that is a single contiguous
block of memory.
- gr_scan()
Create a struct grp from a string (as produced by gr_make()).
Differentiate in the tests against getenv() between an empty string and a
NULL by having the test program return *NULL* for NULL's (no existing
variable) instead of an empty string (variable with empty value).
Now that all platforms use genclock, shuffle things around slightly
for better structure.
Much of this is related to <sys/clock.h>, which should really have
been called <sys/calendar.h>, but unless and until we need the name,
the repocopy can wait.
In general the kernel does not know about minutes, hours, days,
timezones, daylight savings time, leap-years and such. All that
is theoretically a matter for userland only.
Parts of kernel code does however care: badly designed filesystems
store timestamps in local time and RTC chips almost universally
track time in a YY-MM-DD HH:MM:SS format, and sometimes in local
timezone instead of UTC. For this we have <sys/clock.h>
<sys/time.h> on the other hand, deals with time_t, timeval, timespec
and so on. These know only seconds and fractions thereof.
Move inittodr() and resettodr() prototypes to <sys/time.h>.
Retain the names as it is one of the few surviving PDP/VAX references.
Move startrtclock() to <machine/clock.h> on relevant platforms, it
is a MD call between machdep.c/clock.c. Remove references to it
elsewhere.
Remove a lot of unnecessary <sys/clock.h> includes.
Move the machdep.disable_rtc_set sysctl to subr_rtc.c where it belongs.
XXX: should be kern.disable_rtc_set really, it's not MD.
Fix a leak in the recent fixes for file descriptors > SHRT_MAX. In the
case of a file descriptor we can't handle, clear the FILE structure's flags
so it can be reused.
jeff [Tue, 22 Apr 2008 12:34:16 +0000 (12:34 +0000)]
- Use a local variable for i_ino in ufs_lookup. It is only used to
communicate between two parts of this one function. This was causing
problems with shared lookups as each would trash the ino value in the
inode.
- Remove the unused i_ino field from the inode structure.
marius [Mon, 21 Apr 2008 20:40:42 +0000 (20:40 +0000)]
* gthr-posix.h (__gthread_active_p): Use the Solaris implementation
for FreeBSD as well.
This is the fix for __gthread_active_p() returning false positives
which was committed as rev. 1.1.1.8.2.1 to RELENG_7 but now looped
back to the vendor branch via the GCC repository and relicensed to
be GPLv2 by me.
Thanks go to gerald@ for getting the fix approved upstream and for
committing to the GCC repository.
Change the default of ddb_enable to YES so we default to generating textdumps
on panic. This means you get a potentially useful dump even if your system
is running X when you panic.
Back-out previous revision. For now I can use _ddb() variants of stack(9) KPI,
as I use it for debugging only. Once someone will need it for more production
features, the change should be reconsider.
With IPv4 raw sockets, read lock rather than write lock the inpcb when
receiving or transmitting.
With IPv6 raw sockets, read lock rather than write lock the inpcb when
receiving. Unfortunately, IPv6 source address selection appears to
require a write lock on the inpcb for the time being.
On the AT91, we need to write on the EOI register after we handle an
interrupt. So, add a new function pointer, arm_post_filter, which defaults
to NULL, and which will be used as the post_filter arg for
intr_event_create(). Set it properly for the AT91, so that it boots again.
sam [Sun, 20 Apr 2008 20:35:46 +0000 (20:35 +0000)]
Multi-bss (aka vap) support for 802.11 devices.
Note this includes changes to all drivers and moves some device firmware
loading to use firmware(9) and a separate module (e.g. ral). Also there
no longer are separate wlan_scan* modules; this functionality is now
bundled into the wlan module.
Supported by: Hobnob and Marvell
Reviewed by: many
Obtained from: Atheros (some bits)
Revert to rev. 1.161 - switch back to optimized TCP options ordering.
A lot of testing has shown that the problem people were seeing was due
to invalid padding after the end of option list option, which was corrected
in tcp_output.c rev. 1.146.
Thanks to: anders@, s3raphi, Matt Reimer
Thanks to: Doug Hardie and Randy Rose, John Mayer, Susan Guzzardi
Special thanks to: dwhite@ and BitGravity
Discussed with: silby
MFC after: 1 day
Use role="merged" and arch="amd64,i386,..." attributes to mark a
paragraph as MFC'd or one for specific platforms. This should
make no content change with the rendered output.
antoine [Sun, 20 Apr 2008 16:17:44 +0000 (16:17 +0000)]
Move "1000baseT" from IFM_SUBTYPE_ETHERNET_DESCRIPTIONS to
IFM_SUBTYPE_ETHERNET_ALIASES: there is already "1000baseTX" in
IFM_SUBTYPE_ETHERNET_DESCRIPTIONS. This doesn't change ifconfig
behaviour.
Teach pf and ipfw to use read locks in inpcbs write than write locks
when reading credential data from sockets.
Teach pf to unlock the pcbinfo more quickly once it has acquired an
inpcb lock, as the inpcb lock is sufficient to protect the reference.
Assert locks, rather than read locks or write locks, on inpcbs in
subroutines--this is necessary as the inpcb may be passed down with a
write lock from the protocol, or may be passed down with a read lock
from the firewall lookup routine, and either is sufficient.
Fix no sound issues for ASUS W6F (ALC861) laptops (buggy BIOS config that
deserves its own internet memes). The trick is to force all available,
unused pins (that being advertised as "speaker") to behave as microphone
pins instead.
Delay the global registration of the struct ifnet in if_alloc() until after
we're certain the allocation will entierly succeed. This fixes a leak in a
fairly unlikely case.
peter [Sat, 19 Apr 2008 07:25:57 +0000 (07:25 +0000)]
Put in a real isa_irq_pending() stub in order to remove two lines of dmesg
noise from sio per unit. sio likes to probe if interrupts are configured
correctly by looking at the pending bits of the atpic in order to put a
non-fatal warning on the console. I think I'd rather read the pending
bits from the apics, but I'm not sure its worth the hassle.
move cxgb_lt2.[ch] from NIC to TOE
move most offload functionality from NIC to TOE
factor out all socket and inpcb direct access
factor out access to locking in incpb, pcbinfo, and sockbuf
Add the '-u name' option to the env command, which will completely unset
the given variable name (removing it from the environment, instead of
just setting it to a null value).
Next stage of stdio cleanup: Retire __sFILEX and merge the fields back into
__sFILE. This was supposed to be done in 6.0. Some notes:
- Where possible I restored the various lines to their pre-__sFILEX state.
- Retire INITEXTRA() and just initialize the wchar bits (orientation and
mbstate) explicitly instead. The various places that used INITEXTRA
didn't need the locking fields or _up initialized. (Some places needed
_up to exist and not be off the end of a NULL or garbage pointer, but
they didn't require it to be initialized to a specific value.)
- For now, stdio.h "knows" that pthread_t is a 'struct pthread *' to
avoid namespace pollution of including all the pthread types in stdio.h.
Once we remove all the inlines and make __sFILE private it can go back
to using pthread_t, etc.
- This does not remove any of the inlines currently and does not change
any of the public ABI of 'FILE'.
Change the timeout(9) usage in if_ndis to a callout(9) implementation,
as the former is becoming deprecated and exhibits some extraneous
Giant-locking. The new callout(9) is declared MPSAFE, so it may
improve concurrency.
Convert pcbinfo and inpcb mutexes to rwlocks, and modify macros to
explicitly select write locking for all use of the inpcb mutex.
Update some pcbinfo lock assertions to assert locked rather than
write-locked, although in practice almost all uses of the pcbinfo
rwlock main exclusive, and all instances of inpcb lock acquisition
are exclusive.
This change should introduce (ideally) little functional change.
However, it lays the groundwork for significantly increased
parallelism in the TCP/IP code.
Allow linker_search_symbol_name() to be called with KLD lock held.
The linker_search_symbol_name() function is used by stack_print()
and stack_print() can be called from kernel module unload method.