karels [Sat, 10 Mar 2018 00:10:47 +0000 (00:10 +0000)]
Change ps(1) output width to unlimited if not interactive
Apply patch submitted with PR 217159 to make ps use unlimited
width when not associated with a terminal (i.e., none of stdout, stdin,
or stderr is a tty). Update comments and man page correspondingly.
This change was requested to work around lack of -ww in scripts from
third-party packages, including Hadoop, and adds a small measure of
Linux compatibility. Hopefully few if any non-interactive scripts
depend on the old default of 79.
jhb [Fri, 9 Mar 2018 23:37:19 +0000 (23:37 +0000)]
Permit sysctl(8) to set an array of numeric values for a single node.
Most sysctl nodes only return a single value, but some nodes return an
array of values (e.g. kern.cp_time). sysctl(8) understand how to display
the values of a node that returns multiple values (it prints out each
numeric value separated by spaces). However, until now sysctl(8) has
only been able to set sysctl nodes to a single value. This change
allows sysctl to accept a new value for a numeric sysctl node that contains
multiple values separated by either spaces or commas. sysctl(8) parses
this list into an array of values and passes the array as the "new" value
to sysctl(2).
asomers [Fri, 9 Mar 2018 23:25:18 +0000 (23:25 +0000)]
tftpd: Flush files as soon as they are fully received
On an RRQ, tftpd doesn't exit as soon as it's finished receiving a file.
Instead, it waits five seconds just in case the client didn't receive the
server's last ACK and decides to resend the final DATA packet.
Unfortunately, this created a 5 second delay from when the client thinks
it's done sending the file, and when the file is available for other
processes.
Fix this bug by closing the file as soon as receipt is finished.
kevans [Fri, 9 Mar 2018 19:04:06 +0000 (19:04 +0000)]
lualoader: Cache kernel list
With autodetection turned on, hitting the filesystem everytime we need to
calculate choices for the kernel carousel is kind of slow. Cache once on the
first listing and reload it anytime the config is reloaded in case any of
the loader.conf(5) changes that affect this (kernel, kernels,
kernels_autodetect) have changed. This also picks up the case where we've
changed currdev and the autodetected kernels could change.
bdrewery [Fri, 9 Mar 2018 18:51:24 +0000 (18:51 +0000)]
LIB32: Avoid linking in unneeded (and invalid lib32) libz for libmagic build tool.
Usually this is just ignored:
/usr/bin/ld: skipping incompatible /scratch/obj/root/git/freebsd/amd64.amd64/obj-lib32/lib/libz/libz.so when searching for -lz
/usr/bin/ld: skipping incompatible /scratch/obj/root/git/freebsd/amd64.amd64/obj-lib32/lib/libz/libz.a when searching for -lz
However some combination of newer toolchains simply fail here instead:
/usr/bin/ld: error: /home/dstolfa/obj/home/dstolfa/cadets/amd64.amd64/obj-lib32/lib/libz/libz.so is incompatible with /usr/lib/crt1.o
Libz is not needed for mkmagic so just exclude it.
imp [Fri, 9 Mar 2018 17:54:14 +0000 (17:54 +0000)]
Remove K&R stuff: never use it in new code.
Remove how to format K&R stuff. The project hasn't been using it in
new code for a long time. It's so obsolete, we don't need a statement
to never use it. Add a statement requesting that comments about
parameters be preserved when converting to ASNI style, per Kirk.
asomers [Fri, 9 Mar 2018 15:30:20 +0000 (15:30 +0000)]
Add some functional tests for tftpd(8)
tftpd(8) is difficult to test in isolation due to its relationship with
inetd. Create a test program that mimics the behavior of tftp(1) and
inetd(8) and verifies tftpd's response in several different scenarios.
These test cases cover all of the basic TFTP protocol, but not the optional
parts.
hselasky [Fri, 9 Mar 2018 12:16:55 +0000 (12:16 +0000)]
Implement proper support for complete_all() in the LinuxKPI.
When complete_all() is called there might be multiple waiters. The
current implementation could only handle one waiter. Make sure the
completion is sticky when complete_all() is called to be compatible
with Linux.
Found by: Johannes Lundberg <johalun0@gmail.com>
MFC after: 1 week
Sponsored by: Mellanox Technologies
Sponsored by: Limelight Networks
avos [Fri, 9 Mar 2018 11:33:56 +0000 (11:33 +0000)]
net80211: wrap protection frame allocation into ieee80211_alloc_prot()
Move copy-pasted code for RTS/CTS frame allocation into net80211.
While here, add stat / debug message for allocation failures
(copied from run(4)) + return error here in bwn(4).
Reviewed by: adrian
Differential Revision: https://reviews.freebsd.org/D14628
andrew [Fri, 9 Mar 2018 10:34:44 +0000 (10:34 +0000)]
Use the correct address to write back to memory in the GICv3 ITS driver.
This seems to no be needed on supported hardware as they are cache-coherent,
however this may not be the case on all platforms.
sbruno [Fri, 9 Mar 2018 00:08:43 +0000 (00:08 +0000)]
Update tcp_lro with tested bugfixes from Netflix and LLNW:
rrs - Lets make the LRO code look for true dup-acks and window update acks
fly on through and combine.
rrs - Make the LRO engine a bit more aware of ack-only seq space. Lets not
have it incorrectly wipe out newer acks for older acks when we have
out-of-order acks (common in wifi environments).
jeggleston - LRO eating window updates
Based on all of the above I think we are RFC compliant doing it this way:
https://tools.ietf.org/html/rfc1122
section 4.2.2.16
"Note that TCP has a heuristic to select the latest window update despite
possible datagram reordering; as a result, it may ignore a window update with
a smaller window than previously offered if neither the sequence number nor the
acknowledgment number is increased."
Submitted by: Kevin Bowling <kevin.bowling@kev009.com>
Reviewed by: rstone gallatin
Sponsored by: NetFlix and Limelight Networks
Differential Revision: https://reviews.freebsd.org/D14540
cem [Thu, 8 Mar 2018 17:23:18 +0000 (17:23 +0000)]
ipfw(8): Fix endianness for Legacy and Ipv4 table hostname values
The lookup_host() helper subroutine emits a struct in_addr value in network
byte order via caller passed pointer. However, the table value is expected
to be stored in host byte order. On little-endian machines, this produced a
reversed endian table value for Legacy or IPv4 table types when the value
was a hostname (instead of a plain IP address).
Fix by using ntohl() on the output 32-bit address.
While here, avoid some aliasing violations by storing the lookup_host()
output in an intermediate object of the correct type.
PR: 226429
Reported by: bugs.freebsd.org AT mx.zzux.com (also: Tested by)
Security: ipfw hostname table rules could potentially not act as admin intended
Sponsored by: Dell EMC Isilon
hselasky [Thu, 8 Mar 2018 16:27:31 +0000 (16:27 +0000)]
Set correct SL in completion for RoCE in mlx5ib(4).
There is a difference when parsing a completion entry between Ethernet
and IB ports. When link layer is Ethernet the bits describe the type of
L3 header in the packet. In the case when link layer is Ethernet and VLAN
header is present the value of SL is equal to the 3 UP bits in the VLAN
header. If VLAN header is not present then the SL is undefined and consumer
of the completion should check if IB_WC_WITH_VLAN is set.
While that, this patch also fills the vlan_id field in the completion if
present.
hselasky [Thu, 8 Mar 2018 16:19:01 +0000 (16:19 +0000)]
Add call to setup firmware data dump structure during device load in
mlx5core.
Do not consider the inability to create a firmware dump fatal, but
inform about the situation and allow the driver to attach. The device
might not implement the needed VSC, or we might not know the layout of
the registers map. In either case, only firmware dump functionality is
limited, the network operations should be fine.
hselasky [Thu, 8 Mar 2018 15:53:04 +0000 (15:53 +0000)]
Fix mlx5en(4) driver to properly call m_defrag().
When the mlx5en(4) driver was converted to using BUSDMA(9) the call to
m_defrag() was moved after the part of the TX routine that strips the
header from the mbuf chain. Before it called m_defrag it first trimmed
off the now-empty mbufs from the start of the chain. This has the side
effect of also removing the head of the chain that has M_PKTHDR set.
m_defrag() will not defrag a chain that does not have M_PKTHDR set,
thus it was effectively never defragging the mbuf chains.
As it turns out, trimming the mbufs in this fashion is unnecessary since
the call to bus_dmamap_load_mbuf_sg doesn't map empty mbufs anyway, so
remove it.
hselasky [Thu, 8 Mar 2018 15:47:17 +0000 (15:47 +0000)]
Use vport rather than physical-port MTU in mlx5en(4).
Set and report vport MTU rather than physical MTU,
The driver will set both vport and physical port mtu
and will rely on the query of vport mtu.
SRIOV VFs have to report their MTU to their vport manager (PF),
and this will allow them to work with any MTU they need
without failing the request.
Also for some cases where the PF is not a port owner, PF can
work with MTU less than the physical port mtu if set physical
port mtu didn't take effect.
hselasky [Thu, 8 Mar 2018 15:43:41 +0000 (15:43 +0000)]
Use the device unit number for naming the ifnet interface in mlx5en(4).
Currently the ifnet interface is named mceX, where X is a monotonically
incremented value. If the device is reset due to a fatal error, then the
interface name will change. Using the device unit number will keep the
naming consistent across the reset logic.
hselasky [Thu, 8 Mar 2018 15:21:56 +0000 (15:21 +0000)]
Add kernel and userspace code to dump the firmware state of supported
ConnectX-4/5 devices in mlx5core.
The dump is obtained by reading a predefined register map from the
non-destructive crspace, accessible by the vendor-specific PCIe
capability (VSC). The dump is stored in preallocated kernel memory and
managed by the mlx5tool(8), which communicates with the driver using a
character device node.
The utility allows to store the dump in format
<address> <value>
into a file, to reset the dump content, and to manually initiate the
dump.
A call to mlx5_fwdump() should be added at the places where a dump
must be fetched automatically. The most likely place is right before a
firmware reset request.
hselasky [Thu, 8 Mar 2018 11:40:39 +0000 (11:40 +0000)]
Add support for per priority flow control, PFC, to mlx5en(4).
Add support for PFC and implement reading the per priority statistics
using the sysctl(8) interface. PFC is used together with VLAN priority
and can be enabled and disabled on a per priority basis.
Global pause frames and PFC are incompatible features and surrounding
logic has been added to warn the user about misconfiguration.
Update relevant mlx5core APIs for PFC configuration.
hselasky [Thu, 8 Mar 2018 11:23:14 +0000 (11:23 +0000)]
Add support for explicit congestion notification, ECN, to mlx5ib(4).
ECN configuration and statistics is available through a set of sysctl(8)
nodes under sys.class.infiniband.mlx5_X.cong . The ECN configuration
nodes can also be used as loader tunables.
kevans [Wed, 7 Mar 2018 22:05:23 +0000 (22:05 +0000)]
lualoader: Return status in cli_execute_unparsed properly
cli_execute was changed to return the status, cascade that to
cli_execute_unparsed.
This fixes a lot of false "Failed to execute" errors following r330620; no
failures actually occurred, but [module]_error would've then promptly
executed (and also "failed")
jeff [Wed, 7 Mar 2018 22:04:27 +0000 (22:04 +0000)]
Don't assert that the domain free lock is held until we're certain that
there is a valid reservation. This can trip erroneously when memory
falls within a domain but doesn't have the reservation initialized because
it does not meet size or alignment requirements.
kevans [Wed, 7 Mar 2018 18:45:24 +0000 (18:45 +0000)]
loader.conf(5): Document some other settings
These tend to have less coverage in other places and they don't have
defaults as of yet, so mention them here:
- fdt_overlays
- kernels_autodetect (lualoader only)
kevans [Wed, 7 Mar 2018 18:37:04 +0000 (18:37 +0000)]
lualoader: Use cli_execute_unparsed for commands passed in via loader.conf
This applies to:
- exec
- [module]_before
- [module]_error
- [module]_after
Before this commit, these used loader.perform to execute them as a pure,
unsalted loader command. This means that they were not able to take
advantage of any Lua-salted loader commands, like boot and autoboot, or pure
Lua loader commands (functions attached to the 'cli' module).
They now have access to the full arsenal, just shy of being able to execute
arbitrary Lua.
kevans [Wed, 7 Mar 2018 18:31:01 +0000 (18:31 +0000)]
lualoader: Use cli_execute_unparsed instead of loader.interpret
loader.interpret should not be used for executing loader commands from an
untrusted source (e.g. environment vars) as it will allow execution of
arbitrary Lua. Replace it with a call to the recently introduced
cli_execute_unparsed, which parses it out as a loader command and then
dispatches it as a loader command. This effectively filters out arbitrary
Lua.
kevans [Wed, 7 Mar 2018 18:25:27 +0000 (18:25 +0000)]
lualoader: Expose loader.parse and add cli_execute_unparsed
This will be used for scenarios where the command to execute is coming in
via the environment (from, for example, loader.conf(5)) and is thus not
necessarily trusted.
cli_execute_unparsed will immediately be used for handling
module_{before,after,error} as well as menu_timeout_command. We still want
to offer these variables the ability to execute Lua-intercepted loader
commands, but we don't want them to be able to execute arbitrary Lua.
nwhitehorn [Wed, 7 Mar 2018 17:08:07 +0000 (17:08 +0000)]
Move the powerpc64 direct map base address from zero to high memory. This
accomplishes a few things:
- Makes NULL an invalid address in the kernel, which is useful for catching
bugs.
- Lays groundwork for radix-tree translation on POWER9, which requires the
direct map be at high memory.
- Similarly lays groundwork for a direct map on 64-bit Book-E.
The new base address is chosen as the base of the fourth radix quadrant
(the minimum kernel address in this translation mode) and because all
supported CPUs ignore at least the first two bits of addresses in real
mode, allowing direct-map addresses to be used in real-mode handlers.
This is required by Linux and is part of the architecture standard
starting in POWER ISA 3, so can be relied upon.
hselasky [Wed, 7 Mar 2018 15:03:11 +0000 (15:03 +0000)]
Implement missing query for current port rate in mlx5ib(4).
- Factor out port speed definitions into new port.h header file,
similarly as done in Linux upstream.
- Correct two existing port speed definitions in mlx5en according to
Linux upstream.
hselasky [Wed, 7 Mar 2018 14:41:29 +0000 (14:41 +0000)]
Add timeout handle to commands with callback in mlx5core.
The current implementation does not handle timeout in case of command
with callback request, and this can lead to deadlock if the command
doesn't get firmware response. Add delayed callback timeout work
before posting the command to firmware. In case of real firmware
command completion we will cancel the delayed work. In case of
firmware command timeout the callback timeout handler will be called
and it will simulate firmware completion with timeout error.
hselasky [Wed, 7 Mar 2018 14:35:28 +0000 (14:35 +0000)]
Fix potential deadlock in command mode change in mlx5core.
Call command completion handler in case of timeout when working in
interrupts mode. Avoid flushing the commands workqueue after acquiring
the semaphores to prevent a potential deadlock.
https://www.illumos.org/issues/8984
Consider a directory configured as:
drwx-ws---+ 2 henson cpp 3 Jan 23 12:35 dropbox/
user:henson:rwxpdDaARWcC--:f-i----:allow
owner@:--------------:f-i----:allow
group@:--------------:f-i----:allow
everyone@:--------------:f-i----:allow
owner@:rwxpdDaARWcC--:-di----:allow
group:cpp:-wx-----------:-------:allow
owner@:rwxpdDaARWcC--:-------:allow
A new file created in this directory ends up looking like:
rw-r--r-+ 1 astudent cpp 0 Jan 23 12:39 testfile
user:henson:rw-pdDaARWcC--:------I:allow
owner@:--------------:------I:allow
group@:--------------:------I:allow
everyone@:--------------:------I:allow
owner@:rw-p--aARWcCos:-------:allow
group@:r-----a-R-c--s:-------:allow
everyone@:r-----a-R-c--s:-------:allow
with extraneous group@ and everyone@ entries allowing read access that
shouldn't exist.
Per Albert Lee on the zfs mailing list:
"aclinherit=passthrough/passthrough-x should still
ignore the requested mode when an inheritable ACE for owner@ group@,
or everyone@ is present in the parent directory.
It appears there was an oversight in my fix for
https://www.illumos.org/issues/6764 which made calling zfs_acl_chmod
from zfs_acl_inherit unconditional. I think the parent ACL check for
aclinherit=passthrough needs to be reintroduced in zfs_acl_inherit."
We have a large number of faculty who use dropbox directories like the example
to have students submit projects. All of these directories are now allowing
Reviewed by: Sam Zaydel <szaydel@racktopsystems.com>
Reviewed by: Paul B. Henson <henson@acm.org>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Approved by: Matthew Ahrens <mahrens@delphix.com>
Author: Dominik Hassler <hadfl@omniosce.org>
andrew [Wed, 7 Mar 2018 13:16:03 +0000 (13:16 +0000)]
Create macros for the ACPI interrupt cross references. This is considered a
band aid until a better solution to find the correct interrupt controller
can be found.
While here fix one place in the GICv3 ITS driver where the offset wasn't
correctly applied.
hselasky [Wed, 7 Mar 2018 12:58:51 +0000 (12:58 +0000)]
Make sure the IPv6 scope ID gets properly masked in ibcore.
When exchanging CM messages the IPv6 scope ID should be ignored
for link local addresses when doing comparisons. Make sure the
scope ID is always set to zero for link local addresses.
andrew [Wed, 7 Mar 2018 09:58:36 +0000 (09:58 +0000)]
Restrict the arm64 DMAP region to the 1G blocks where we have at least
one physical page. This is in preparation for limiting it further as this
is needed on some hardware, however testing has shown issues with further
restricting the DMAP and ACPI.
kevans [Wed, 7 Mar 2018 04:11:14 +0000 (04:11 +0000)]
lualoader: Only loadelf before boot/autoboot if no kernel loaded
Back when I "fixed" the loading of kernel/modules to be deferred until
booting, I inadvertently broke the ability to manually load a set of kernels
and modules in case of something bad having happened. lualoader would
instead happily load whatever is specified in loader.conf(5) and go about
the boot, leading to a panic loop as you try to rediscover a way to stop the
panicky efirt module from loading and fail miserably.
gonzo [Tue, 6 Mar 2018 23:39:43 +0000 (23:39 +0000)]
[ig4] Add support for i2c controllers on Skylake and Kaby Lake
This was tested by Ben on HP Chromebook 13 G1 with a
Skylake CPU and Sunrise Point-LP I2C controller and by me on
Minnowboard Turbot with Atom E3826 (formerly Bay Trail)
Submitted by: Ben Pye <ben@curlybracket.co.uk>
Reviewed by: gonzo
Obtained from: DragonflyBSD (a4549657 by Imre Vadász)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D13654
kevans [Tue, 6 Mar 2018 22:45:45 +0000 (22:45 +0000)]
aw_usbphy: Move later to SUPPORTDEV pass
vbus-supply properties may be specified for each PHY. These properties
reference a regulator that we must turn on/off as we turn the PHY on/off.
However, if the usbphy comes up before the regulator in question (as is the
case with GPIO-controlled regulators), then we will fail to grab a handle to
the regulator and control it as the PHY power state changes.
Fix it by just attaching the usbphy driver later. We don't really need it at
RESOURCE, we just need it to be before DEFAULT when ehci/ohci attach. In
particular, this fixes the USB NIC on a board that we don't yet supported-
without this, it will not power on and if_ure cannot attach.
Tested on: various boards [manu]
Tested on: OrangePi R1 [Rap2 (irc)]
Reported by: Rap2 (irc, "Cannot find USB NIC")
projects / FreeBSD / FreeBSD.git / log