Upgrade our copy of llvm/clang to trunk r154661, in preparation of the
upcoming 3.1 release (expected in a few weeks). Preliminary release
notes can be found at: <http://llvm.org/docs/ReleaseNotes.html>
Jung-uk Kim [Mon, 16 Apr 2012 21:22:02 +0000 (21:22 +0000)]
- Implement pipe2 syscall for Linuxulator. This syscall appeared in 2.6.27
but GNU libc used it without checking its kernel version, e. g., Fedora 10.
- Move pipe(2) implementation for Linuxulator from MD files to MI file,
sys/compat/linux/linux_file.c. There is no MD code for this syscall at all.
- Correct an argument type for pipe() from l_ulong * to l_int *. Probably
this was the source of MI/MD confusion.
Jung-uk Kim [Mon, 16 Apr 2012 19:31:44 +0000 (19:31 +0000)]
- When interrupt is not requested for VM86 call, make a fake exit point and
push the address onto stack as we do for INTn emulation. This avoids stack
underflow when we encounter RETF instruction in VM86 mode. Lack of this
exit point actually caused page fault in VM86 mode with VESA module when we
resume from suspend state[1].
- Remove unnecessary CLI and STI instructions from BIOS interrupt emulation.
INTn and IRET must be able to emulate the flag correctly.
Marius Strobl [Mon, 16 Apr 2012 18:29:07 +0000 (18:29 +0000)]
Turn on PREEMPTION by default. After fixing several bugs over time, the
last show-stopper keeping PREEMPTION from being usable on sparc64 should
have been dealt with in r230662.
At least on 2-way systems, PREEMPTION causes a little bit of a degradation
in worldstone performance. However, FreeBSD seems to have started building
up regressions in !PREEMPTION cases so sparc64 better should not be an
oddball in this regard.
Jaakko Heinonen [Mon, 16 Apr 2012 18:07:42 +0000 (18:07 +0000)]
tmpfs: Allow update mounts only for certain options.
Since r230208 update mounts were allowed if the list of mount options
contained the "export" option. This is not correct as tmpfs doesn't
really support updating all options.
When we receive an ICMP unreach need fragmentation datagram, we take
proposed MTU value from it and update the TCP host cache. Then
tcp_mss_update() is called on the corresponding tcpcb. It finds the
just allocated entry in the TCP host cache and updates MSS on the
tcpcb. And then we do a fast retransmit of what we have in the tcp
send buffer.
This sequence gets broken if the TCP host cache is exausted. In this
case allocation fails, and later called tcp_mss_update() finds nothing
in cache. The fast retransmit is done with not reduced MSS and is
immidiately replied by remote host with new ICMP datagrams and the
cycle repeats. This ping-pong can go up to wirespeed.
To fix this:
- tcp_mss_update() gets new parameter - mtuoffer, that is like
offer, but needs to have min_protoh subtracted.
- tcp_mtudisc() as notification method renamed to tcp_mtudisc_notify().
- tcp_mtudisc() now accepts not a useless error argument, but proposed
MTU value, that is passed to tcp_mss_update() as mtuoffer.
Reported by: az
Reported by: Andrey Zonov <andrey zonov.org>
Reviewed by: andre (previous version of patch)
Before r228267 the option was honored but the original content of
boot.config was not preserved. I tried to fix that but missed the idea.
Now the proper way of doing things is taken from i386/boo2.
Also, a comment is added to explain this a little bit unobvious
behavior.
Adrian Chadd [Sun, 15 Apr 2012 22:59:56 +0000 (22:59 +0000)]
Add in the AP96 phy configuration from openwrt.
* arge0 doesn't (yet) work via the switch PHY ports; I'm not sure why.
* arge1 maps to the WAN port. That works.
TODO:
* The PLL register needs a different (non-default) value for Gigabit
Ethernet. The board setup code needs to be extended a bit to allow
for non-default pll_1000 values - right now, those values come out
of hard-coded values in the per-chip set_pll_ge() routines.
Adrian Chadd [Sun, 15 Apr 2012 19:54:22 +0000 (19:54 +0000)]
Drop this down from 512 to 128 for now.
This may result in a bit of a throughput drop. However, any throughput
drop at this point should be investigated and root caused, as it's likely
because TX scheduling (all the way down to how preemption, scheduler work,
etc) is happening in a sub-optimal fashion.
This also makes it much more likely to be reloadable on a live machine.
Allocating 5120 TX ath_buf entries via contigmalloc is very unlikely
after a few hours of using X/Chromium.
add usr.sbin/pkg which is a bootstrap tool for pkgng.
it respects PACKAGESITE, PACKAGEROOT, and a new environment variable ABI (if a user want to use a different API from the base one for its packages)
it has no man page on purpose to avoid hidding the pkg(8) man page from the pkgng package.
for now uses pkgbeta.FreeBSD.org as default mirror to find its package
it respects MK_PKGTOOLS
Adrian Chadd [Sun, 15 Apr 2012 00:04:23 +0000 (00:04 +0000)]
Override some default values to work around various issues in the deep,
dirty and murky past.
* Override the default cache line size to be something reasonable if
it's set to 0. Some NICs initialise with '0' (eg embedded ones)
and there are comments in the driver stating that various OSes (eg
older Linux ones) would incorrectly program things and 0 out this
register.
* Just default to overriding the latency timer. Every other driver
does this.
* Use a default cache line size of 32 bytes. It should be "reasonable
enough".
Marius Strobl [Sat, 14 Apr 2012 17:17:55 +0000 (17:17 +0000)]
Add support for the Atmel SAM9XE familiy of microcontrollers, which
consist of a ARM926EJ-S processor core with up to 512 Kbytes of on-chip
flash. Tested with SAM9XE512.
Marius Strobl [Sat, 14 Apr 2012 17:09:38 +0000 (17:09 +0000)]
Add support for the Atmel SAM9XE familiy of microcontrollers, which
consist of a ARM926EJ-S processor core with up to 512 Kbytes of on-chip
flash. Tested with SAM9XE512.
Luigi Rizzo [Sat, 14 Apr 2012 16:44:18 +0000 (16:44 +0000)]
i prefer this fix for the -Wformat warning (just one cast,
all the other variables are already correct for %x).
My previous attempt put the cast in the wrong place.
There seems to be an issue with Qemu (or FreeBSD VirtIO) that sets
the PCI register space for the device config to bogus values. This
only seems to happen after unloading and reloading the module.
Marius Strobl [Fri, 13 Apr 2012 22:58:23 +0000 (22:58 +0000)]
Merge from x86:
r233961:
Fix interrupt load balancing regression, introduced in revision
222813, that left all un-pinned interrupts assigned to CPU 0.
In intr_shuffle_irqs(), remove CPU_SETOF() call that initialized
the "intr_cpus" cpuset to only contain CPU0.
This initialization is too late and nullifies the results of calls
to the intr_add_cpu() that occur much earlier in the boot process.
r234074 (partial):
The BSP is not added to the mask of valid target CPUs for interrupts.
Fix this by adding the BSP as an interrupt target directly in
Xin LI [Fri, 13 Apr 2012 22:34:01 +0000 (22:34 +0000)]
The scandir(3) function expects fourth parameter, compar, be in type of:
int (*compar)(const struct dirent **, const struct dirent **)
The current code defines sortq() to accept two void *, then cast them
to const struct dirent **. Because the code does not really need this
cast, we can eliminate the casts by changing the function prototype
to match scandir(3) expectation.
Change SIGUSR1 to SIGTHR to properly wake up a process that is being
traced. The use of SIGUSR1 caused traced processes (those attached to
with dtrace -p) to exit when dtrace exited.
Luigi Rizzo [Fri, 13 Apr 2012 16:42:54 +0000 (16:42 +0000)]
Properly disable crc stripping when operating in netmap mode.
Contrarily to what i wrote in my previous commit, the 82599
does include the CRC in the length. The operating mode is
reset in ixgbe_init_locked() and so we need to hook into
the places where the two registers (HLREG0 and RDRXCTL) are
modified.
Luigi Rizzo [Fri, 13 Apr 2012 16:32:33 +0000 (16:32 +0000)]
add the new memory allocator for netmap, which allocates memory
in small clusters instead of one big contiguous chunk.
This was already enabled in the previous commit.
Adrian Chadd [Fri, 13 Apr 2012 08:48:38 +0000 (08:48 +0000)]
Introduce the ability to grab local EEPROM data from the firmware(9)
interface.
* Introduce a device hint, 'eeprom_firmware', which is the name of firmware
to lookup.
* If the lookup succeeds, take a copy of it and use it as the eeprom data.
This isn't enabled by default - you have to define ATH_EEPROM_FIRMWARE.
I'll add it to the configuration variables in a later commit.
TODO:
* just keep a firmware reference in ath_softc, and remove the need to
waste the extra memory in having sc_eepromdata be a malloc()ed block.
Adrian Chadd [Fri, 13 Apr 2012 08:45:50 +0000 (08:45 +0000)]
(ab)Use the firmware API to store away EEPROM calibration data for
future use by the ath(4) driver.
These embedded devices put the calibration/PCI bootstrap data on the
on board SPI flash rather than on an EEPROM connected to the NIC.
For some boards, there's two NICs and two sets of EEPROM data in the
main SPI flash.
The particulars:
* Introduce ath_fixup_size, which is the size of the EEPROM area in
bytes.
* Create a firmware image with a name based on the PCI device identifier
(bus/slot/device/function).
* Hide some verbose debugging behind 'bootverbose'.
ath(4) can then use this to load in the EEPROM data.
Adrian Chadd [Fri, 13 Apr 2012 06:11:24 +0000 (06:11 +0000)]
Sync this code against what's in OpenWRT trunk.
* the openwrt code doesn't treat 0/0/0 any differently
from other bus/slot/func combinations.
* A "local write" function writes to the LCONF area, and
so I've added it.
* The PCI workaround at attach time uses this LCONF code,
which it already did ..
* .. but it is a 4 byte write, not a 2 byte write.
Even though it's PCIR_COMMAND which is a two byte PCI register.
Tested on: AR7161
TODO: The other two AR71xx derivatives
TODO: More thoroughly stare at the datasheets I do have
and if it indeed is incorrect, push fixes to both
FreeBSD and Linux/OpenWRT.
John Baldwin [Thu, 12 Apr 2012 21:34:58 +0000 (21:34 +0000)]
Update the ddb and gdb backends for the new 'trace_thread' hook.
It is implemented via db_trace_thread() for DDB and not implemented
for GDB. This should have been part of r234190.
Pointy hat to: jhb
Reported by: jkim
MFC after: 1 week
Peter Grehan [Thu, 12 Apr 2012 18:46:48 +0000 (18:46 +0000)]
Complete polled-mode operation by using a callout if the device will be
used in polled-mode. The callout invokes uart_intr, which rearms the timeout.
Implemented for bhyve, but generically useful for e.g. embedded bringup
when the interrupt controller hasn't been setup, or if it's not deemed
worthy to wire an interrupt line from a serial port.
John Baldwin [Thu, 12 Apr 2012 17:43:59 +0000 (17:43 +0000)]
- Extend the KDB interface to add a per-debugger callback to print a
backtrace for an arbitrary thread (rather than the calling thread).
A kdb_backtrace_thread() wrapper function uses the configured debugger
if possible, otherwise it falls back to using stack(9) if that is
available.
- Replace a direct call to db_trace_thread() in propagate_priority()
with a call to kdb_backtrace_thread() instead.
John Baldwin [Thu, 12 Apr 2012 14:49:25 +0000 (14:49 +0000)]
If a linker file contains at least one module, but all of the modules
fail to load (the MOD_LOAD event fails) during a kldload(2), unload the
linker file and fail the kldload(2) with ENOEXEC.
Luigi Rizzo [Thu, 12 Apr 2012 14:06:05 +0000 (14:06 +0000)]
Apparently the length field in advanced descriptors
does not include the CRC irrespective of the setting
of CRCSTRIP. The 82599 data sheets (sec. 7.1.6) say differently.
Very strange. Need to check what happens on legacy descriptors,
but for the time being this restores functionality.