Refactor vdev_geom_attach and friends to reduce code duplication
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/vdev_geom.c
Move checks for provider's sectorsize and mediasize into a single
location in vdev_geom_attach. Remove the zfs::vdev::taste class;
it's ok to use the regular vdev class for tasting. Consolidate guid
checks into a single location in vdev_attach_ok. Consolidate some
error handling code from vdev_geom_attach into vdev_geom_detach,
closing a resource leak of geom consumers in the process.
Add a savecore_enable variable support for the savecore rc script
By default set to 'YES' so it does not change the current behaviour for users,
this variable allows to decide to not extract crach dumps from the dump
device at boot time by setting it to "NO" in rc.conf.
Add function to detect the presence of a port module and use this
function to error out early when no port module is present and doing
eeprom access. This also prevents error codes from filling up in
dmesg.
Note, this change results in the Kyuafile inclusion in the runtime
package, which needs to be fixed, however addresses the PR as far
as I can tell in my tests.
PR: 209114
Submitted by: ngie
Sponsored by: The FreeBSD Foundation
adrian [Thu, 28 Apr 2016 20:29:49 +0000 (20:29 +0000)]
[net80211] handle action frames in adhoc mode from the node that created the BSS.
We don't have a separate bss node; instead we dup the first node we saw
and turn that into the BSS node. This means that action frames from
that node would be rejected.
So, check that the node is the bss node /and/ the MAC doesn't match ni_macaddr.
That's the "right" way for now to verify it's an unknown node.
This fixes handling action frames in adhoc mode, which includes negotiating
11n aggregation via ADDBA/DELBA.
This by itself isn't enough to correctly create 11n adhoc networks; but
it is required for aggregation to be negotiated.
- Add missing va_end's after corresponding va_start's to cleanup state
- Eliminate questionable bzero'ing of va_list passed in to
do_buff_decode(..) and do_encode(..) from buff_{de,en}code_visit(..)
and csio_{de,en}code_visit(..). Make va_list a pointer instead and
pass NULL into the underlying functions to handler this in a portable
way.
- Do some minor style(9) clean up in affected functions.
Add some notes about the implicit resource mapping for activated resources.
Specifically, mention that rman_get_bustag/handle/virtual are valid after
a resource is activated. Also, mention the wrapper API that accepts a
struct resource instead of a bus tag and handle.
Complete the UDP tunneling of ICMP msgs to those protocols
interested in having tunneled UDP and finding out about the
ICMP (tested by Michael Tuexen with SCTP.. soon to be using
this feature).
Add PACKAGE fields to usr.sbin/extattr/tests/Makefile
usr.sbin/extattr/tests/Makefile
Add boiler plate required by 298107 but omitted by 298483. These
two changes passed through CR in parallel. I think this should get
the full test suite running in Jenkins again.
This cleans up the timers code in TCP to start using the new
async_drain functionality. This as been tested in NF as well as
by Verisign. Still to do in here is to remove all the old flags. They
are currently left being maintained but probably are no longer needed.
Sponsored by: Netflix Inc.
Differential Revision: http://reviews.freebsd.org/D5924
ARM: Use kernel pmap as intermediate mapping in context switch.
On ARM, we can directly switch between translation tables only when
the size of the mapping for any given virtual address is the same in
the old and new translation tables. The load of new TTB and subsequent
TLB flush is not atomic operation. So speculative page table walk can
load TLB entry from new mapping while rest of TLB entries are still the
old ones. In worst case, this can lead to situation when TLB cache can
contain multiple matching TLB entries. One (from old mapping) L2 entry
for VA + 4k and one (from new mapping) L1 entry for VA.
Thus, we must switch to kernel pmap translation table as intermediate
mapping because all sizes of these (old pmap and kernel pmap) mappings
are same (or unmapped). The same is true for switch from kernel pmap
translation table to new pmap one.
GPIO: Add support for gpio pin interrupts.
Add new function gpio_alloc_intr_resource(), which allows an allocation
of interrupt resource associated to given gpio pin. It also allows to
specify interrupt configuration.
Note: This functionality is dependent on INTRNG, and must be
implemented in each GPIO controller.
ensure that initial local apic id is sane on AMD 10h systems
Summary:
The Initial Local APIC ID is returned by CPUID function 1 (in EBX).
On AMD Family 10h systems the way that ID is built is controlled by
an MSR bit (InitApicIdCpuIdLo). BKDG instructs BIOS to set it in a
certain way, but a BIOS can be buggy. In that case the ID can confuse
tools that use it, e.g. hwloc.
For example, on a system that I own real Local APIC IDs are configured
as 0, 1, 2, 3, but IDs reported via CPUID.1 are 0, 0x40, 0x80, 0xc0.
See: https://github.com/open-mpi/hwloc/issues/183
ipdivert: Remove unnecessary and incorrectly typed variable.
In principle n is only used to carry a copy of ipi_count, which is
unsigned, in the non-VIMAGE case, however ipi_count can be used
directly so it is not needed at all. Removing it makes things look
cleaner.
Don't use the control argument after calling sctp_add_to_readq().
This breaks the userland stack. There should be no functional change
for the FreeBSD kernel stack.
While there, use consistent variable nameing.
Add a pcib_attach_child() method to manage adding the child "pci" device.
This allows the PCI-PCI bridge driver to save a reference to the child
device in its softc.
Note that this required moving the "pci" device creation out of
acpi_pcib_attach(). Instead, acpi_pcib_attach() is renamed to
acpi_pcib_fetch_prt() as it's sole action now is to fetch the PCI
interrupt routing table.
Add 'devctl delete' that calls device_delete_child().
'devctl delete' can be used to delete a device that is no longer present.
As an anti-foot-shooting measure, 'delete' will not delete a device
unless it's parent bus says it is no longer present. This can be
overridden by passing the force ('-f') flag.
Note that this command should be used with care. If a device is deleted
that is actually present it can't be resurrected unless the parent bus
device's driver supports rescans.
Rescanning a PCI bus uses the following steps:
- Fetch the current set of child devices and save it in the 'devlist'
array.
- Allocate a parallel array 'unchanged' initalized with NULL pointers.
- Scan the bus checking each slot (and each function on slots with a
multifunction device).
- If a valid function is found, look for a matching device in the 'devlist'
array. If a device is found, save the pointer in the 'unchanged' array.
If a device is not found, add a new device.
- After the scan has finished, walk the 'devlist' array deleting any
devices that do not have a matching pointer in the 'unchanged' array.
- Finally, fetch an updated set of child devices and explicitly attach any
devices that are not present in the 'unchanged' array.
This builds on the previous changes to move subclass data management into
pci_alloc_devinfo(), pci_child_added(), and bus_child_deleted().
Subclasses of the PCI bus use custom rescan logic explicitly override the
rescan method to disable rescans.
The BUS_RESCAN() method rescans a single bus device checking for devices
that have been added or removed from the bus. A new 'rescan' command is
added to devctl(8) to trigger a rescan.
Make create_object callback optional and return EOPNOTSUPP when it isn't
defined. Remove eaction_create_compat() and use designated initializers to
initialize eaction_opcodes structure.
Delay revmoing the last jail reference in prison_proc_free, and instead
put it off into the pr_task. This is similar to prison_free, and in fact
uses the same task even though they do something slightly different.
This resolves a LOR between the process lock and allprison_lock, which
came about in r298565.
The facility_initialized and facility arrays are the same size and were
intended to be indexed the same. I believe this mismatch was just a
typo/braino in r208731.
- Factor out common part to zynq-7000.dtsi
- Fix problem with Zynq interrupts by using interrupt "triples"
in .dtsi file to differentiate between edge-triggered and
level-triggered interrupts
- cgem driver now recognizes "status" property
Submitted by: Thomas Skibo <thomasskibo@yahoo.com>
Differential Revision: https://reviews.freebsd.org/D6095
cem [Tue, 26 Apr 2016 23:02:18 +0000 (23:02 +0000)]
tcp_usrreq: Free allocated buffer in relock case
The disgusting macro INP_WLOCK_RECHECK may early-return. In
tcp_default_ctloutput() the TCP_CCALGOOPT case allocates memory before invoking
this macro, which may leak memory.
Add a _CLEANUP variant that takes a code argument to perform variable cleanup
in the early return path. Use it to free the 'pbuf' allocated in
tcp_default_ctloutput().
I am not especially happy with this macro, but I reckon it's not any worse than
INP_WLOCK_RECHECK already was.
cem [Tue, 26 Apr 2016 22:30:54 +0000 (22:30 +0000)]
g_part_bsd64: Check for valid on-disk npartitions value
This value is u32 on disk, but assigned to an int in memory. After we do the
implicit conversion via assignment, check that the result is at least one[1]
(non-negative[2]).
1. The subsequent for-loop iterates from gpt_entries minus one, down, until
reaching zero. A negative or zero initial index results in undefined signed
integer overflow.
2. It is also used to index into arrays later.
In practice, we expected non-malicious disks to contain small positive values.
cem [Tue, 26 Apr 2016 22:01:07 +0000 (22:01 +0000)]
ciss(4): Fix overrun of array
The softc member 'ciss_logical' is an array of 'ciss_max_logical_bus' members.
Most of the time it is iterated correctly. This patch fixes the two instances
where the driver iterated off the end of the array.
ism_stop() already destroys and frees 'sp', including a call to ic_destroy().
Don't dereference 'sp' after ism_stop() and don't invoke ic_destroy() on the
freed memory either.
Add dtb/zynq to generate dtb files for Zynq-based boards
It seems that the only way to supply dtb to loader on Zynq-based
SoCs is to manually generate dtb and place it to pre-defined location
on SD card or TFTP server where loader can pick it up. More modern
approach is to add modules/dtb/%soc% module and let installworld
target generate dtb and copy them to /boot/dtb/ where they can be
loaded by ubldr
cem [Tue, 26 Apr 2016 20:59:21 +0000 (20:59 +0000)]
aacraid(4): Fix some mostly trivial buffer overruns
strcpy(3) emits a trailing nul byte, trampling fields after the intended
destination. Instead, use strncpy(3), intentionally leaving these fields
not nul-terminated.
msdosfs: Prevent buffer overflow when expanding win95 names
In win2unixfn() we expand Windows 95 style long names. In some cases that
requires moving the data in the nbp->nb_buf buffer backwards to make room. That
code failed to check for overflows, leading to a stack overflow in win2unixfn().
We now check for this event, and mark the entire conversion as failed in that
case. This means we present the 8 character, dos style, name instead.
cem [Tue, 26 Apr 2016 20:27:17 +0000 (20:27 +0000)]
radix_mpath: Don't derefence a NULL pointer in for loop iteration
It seems rn_dupedkey may be NULL, because of the NULL check inside the loop.
(Also, the rt gets assigned from rn_dupedkey and NULL checked at top of loop.)
However, the for-loop update condition happens before the top-of-loop check and
dereferences 'rt' unconditionally.
Instead, NULL-check before dereferencing.
If rn_dupedkey cannot in fact be NULL, or something else protects this, feel
free to revert this and add an ASSERT of some kind instead.
This was introduced in r191080 (2009) and moved around slightly in r293657.
cem [Tue, 26 Apr 2016 19:57:35 +0000 (19:57 +0000)]
osd(9): Change array pointer to array pointer type from void*
This is a minor follow-up to r297422, prompted by a Coverity warning. (It's
not a real defect, just a code smell.) OSD slot array reservations are an
array of pointers (void **) but were cast to void* and back unnecessarily.
Keep the correct type from reservation to use.
osd.9 is updated to match, along with a few trivial igor fixes.
projects / FreeBSD / FreeBSD.git / log