andrew [Wed, 21 Sep 2016 09:50:50 +0000 (09:50 +0000)]
MFC 304799:
Map coherent memory in a non-coherent dma tag as uncached. This is similar
to what the 32-bit arm code does, with the exception that it always assumes
the tag is non-coherent.
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
andrew [Wed, 21 Sep 2016 09:45:14 +0000 (09:45 +0000)]
MFC 305285:
Add a pc_clock pcpu field and use it to implement cpu_est_clockrate. This
will allow drivers that manage the clock frequency to communicate this with
the reset of the kernel.
andrew [Wed, 21 Sep 2016 09:06:06 +0000 (09:06 +0000)]
MFC r304892:
Print both the kernel read and write translation in DDB when asking for
a virtual to physical translation. These may be different, e.g. when a
page is mapped as read-only.
ip6_output() was missing cache invalidation code analougous to
ip_output.c. r304545 disabled L2 caching for UDP/IPv6 as a workaround.
This change adds the missing cache invalidation code and reverts
r304545.
MFC r305778:
Fix swap tables between sets when this functional is enabled.
We have 6 opcode rewriters for table opcodes. When `set swap' command
invoked, it is called for each rewriter, so at the end we get the same
result, because opcode rewriter uses ETLV type to match opcode. And all
tables opcodes have the same ETLV type. To solve this problem, use
separate sets handler for one opcode rewriter. Use it to handle TEST_ALL,
SWAP_ALL and MOVE_ALL commands.
This fixes the scenario hit by the Jenkins job where it's infecting
the build with --sysroot, etc options from the Jenkins build in the
tests.
Prefix all intermediate variables (_CFLAGS, etc) with "ATF_BUILD" [*].
Requested by: jmmv
r305170:
Don't bake all of CC/CPP/CXX into CFLAGS
Capture executable names for CC, CPP, CXX (assumed to be the
first non-CCACHE_BIN word).
This change strips out all of the cross-compiler arguments, (-target,
-B, etc), added to ${CC}, etc via ${CROSSENV} in Makefile.inc1, so it
doesn't infect the build and subsequently the test.
Add comments noting why this logic is being added, and why the logic in
r305041 was necessary/what it was trying to achieve.
This is required after recent changes made to the toolchain to always
specify --sysroot, -target, -B, etc with clang in buildworld (presumably
r304681).
Use SRCTOP instead of a homegrown definition for it (SRCDIR)
r305019:
Remove unnecessary variable (SRCDIR) replaced by SRCTOP in Makefile.common
r305020:
Remove redundant declarations and simplify ../ in pathing
- TESTSBASE and LOCALBASE are already defined in bsd.tests.mk
- TESTSDIR is automatically divined as ${TESTSBASE}${RELDIR:H} after
r289158.
- Replace SRCDIR with SRCTOP
andrew [Fri, 16 Sep 2016 12:42:36 +0000 (12:42 +0000)]
MFC 305546:
When synchronising the instruction and data caches we only need to clean
the data cache to the point of unification. This is the point where the
two caches are unified to a single unified cache so cleaning past here
is just extra unneeded work.
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
andrew [Fri, 16 Sep 2016 12:39:21 +0000 (12:39 +0000)]
MFC 305545:
Only call cpu_icache_sync_range when inserting an executable page. If the
page is non-executable the contents of the i-cache are unimportant so this
call is just adding unneeded overhead when inserting pages.
While doing research using gem5 with an O3 pipeline and 1k/32k/1M iTLB/L1
iCache/L2 Bjoern Zeeb (bz@) observed a fairly high rate of calls into
arm64_icache_sync_range() from pmap_enter() along with a high number of
instruction fetches and iTLB/iCache hits.
Limiting the calls to arm64_icache_sync_range() to only executable pages,
we observe the iTLB and iCache Hit going down by about 43%. These numbers
are quite misleading when looked at alone as at the same time instructions
retired were reduced by 19.2% and instruction fetches were reduced by 38.8%.
Overall this reduced the runtime of the test program by 22.4%.
On Juno hardware, in steady-state, running the same test, using the cycle
count to determine runtime, we do see a reduction of up to 28.9% in runtime.
While these numbers certainly depend on the program executed, we expect an
overall performance improvement.
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
andrew [Fri, 16 Sep 2016 12:17:01 +0000 (12:17 +0000)]
MFC 303744:
Remove the pvh_global_lock lock from the arm64 pmap. It is unneeded on arm64
as invalidation will have completed before the pmap_invalidate_* functions
have complete.
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
Improvements include:
* readelf: report all relocation types in rel/rela for MIPS N64
* readelf: add ELFOSABI_ARM_AEABI
* elfdump: add ELFOSABI_ARM_AEABI and ELFOSABI_ARM
* Add recent RISC-V relocations
* elfcopy: use elftc_timestamp, to support SOURCE_DATE_EPOCH
MFC r305590:
Correctly map the USB mouse tilt delta values into buttons 5 and 6
instead of 3 and 4 which is used for the scroll wheel, according to
X.org.
MFC r305123: Fix kernel panic when inheriting properties without default.
There are two writable hidden properties "iscsioptions" and "stmf_sbd_lu",
that have no default string value. Attempt to unset them or replicate
caused kernel panic. This simple bandaid seems fixes the problem nicely.
MFC r305536: Fix channel initialization in FBS mode.
Due to reading initialized variable, FIS receive area was always allocated
as 256 bytes, suitable for command-based switching, instead of 4096 bytes,
required for FIS-based switching. This caused memory corruption in case of
port multipliers used on FBS-capable HBAs (Marvell).
will [Tue, 13 Sep 2016 19:01:58 +0000 (19:01 +0000)]
MFC r305484:
loader.efi: Bump the staging size to 64M.
This is required on my system, which loads nvidia, vmm, and zfs, and 48M is
no longer enough for that. nvidia-driver's recent update increased its size
by several megabytes.
MFC 305624:
Document PCI_HP and PCI_IOV kernel options and various tunables in pci(4).
Describe PCI-related kernel options for HotPlug and SR-IOV support in the
pci(4) manual page. While here, add a section describing the various
tunables supported by the PCI bus driver as well.
andrew [Tue, 13 Sep 2016 14:14:39 +0000 (14:14 +0000)]
MFC 305767:
Add a warning about a known erratum we have observed on ThunderX pass 1.1.
As this is evaluation hardware with only a few users, and there is a lack
of information add a warning when booting on this hardware.
MFC r305679: Switch random_get_pseudo_bytes() shim to arc4rand().
Our shim for Solaris random_get_bytes() uses read_random(), that looks
reasonable, since it guaranties reliably seeded random data. On the other
side Solaris random_get_pseudo_bytes() does not provide this guarantie,
and its original Solaris implementation is equivalent to our arc4rand(),
using software crypto without stressing slower hardware RNG.
mm [Mon, 12 Sep 2016 22:07:00 +0000 (22:07 +0000)]
MFC r305422:
Sync libarchive with vendor
Vendor issues fixed:
PR #777: Multiple bugfixes for setup_acls()
This includes a bugfix for a bug that caused ACLs not to be read properly
for files and directories inside subdirectories and as a result not being
stored or being incorrectly stored in tar archives.
Decrease the anti-congestion sleep in 480.leapfile-ntpd to 1 hour
24 hours is too long. Periodic scripts are executed serially, so when
combined with the sleep in 410.pkg-audit periodic could actually take more
than 24 hours and block the next invocation.
Otherwise, it will silently disable the login for the selected account if
the argument is unrecognizable.
usr.sbin/pw/pw.h
usr.sbin/pw/pw_conf.c
usr.sbin/pw/pw_user.c
Use separate rules to validate boolean parameters and passwd
parameters. Error out if a password parameter cannot be parsed.
usr.sbin/pw/tests/Makefile
usr.sbin/pw/tests/crypt.c
usr.sbin/pw/tests/pw_useradd.sh
usr.sbin/pw/tests/pw_usermod.sh
Add tests for the validation. Also, enhance existing
password-related tests to actually validate that the correct hash is
written to master.passwd.
MFC r305421:
Resolve deadlock between device_detach() and usbd_do_request_flags()
by reviving the SX control request lock and refining which lock
protects the common scratch area in "struct usb_device".
The SX control request lock was removed by r246759 because it caused a
lock order reversal with the USB enumeration lock inside
usbd_transfer_setup() as a function of r246616. It was thought that
reducing the number of locks would resolve the LOR, but because some
USB device drivers use usbd_do_request_flags() inside callback
functions, like in taskqueues, a deadlock may occur when these are
drained from device_detach(). By restoring the SX control request
lock usbd_do_request_flags() is allowed to complete its execution
when a USB device driver is detaching. By using the SX control request
lock to protect the scratch area, the LOR introduced by r246616 is
also resolved.
Bump the FreeBSD version while at it to force recompilation of all USB
kernel modules.
MFC r303352
- Change the fbuf "vga" parameter to "vga=on|io|off".
"io" is the default, and allows VGA i/o registers to be
accessed. This is required by Win7/2k8 graphics guests that
use a combination of BIOS int10 and UEFI.
"off" disables all VGA i/o and mem accesses.
"on" is not yet hooked up, but will enable full VGA rendering.
OpenBSD/UEFI >= 5.9 graphics guests can be booted using "vga=off"
- Allow "rfb" to be used instead of "tcp" for the fbuf VNC
description. "tcp" will be removed at a future point and is
kept as an alias.
In m_devget(), if the data fits in a packet header mbuf, check the amount
of data is less than or equal to MHLEN instead of MLEN when placing initial
small packet header at end of mbuf.
MFC r304571:
Make the UKBD USB transfers double buffered and set them up one by one,
so they are memory independent which allows for handling panics
triggered by the keyboard driver itself, typically via CTRL+ALT+ESC
sequences. Or if the USB keyboard driver was processing a key at the
moment of panic. Allow UKBD to be attached while keyboard polling is active.
MFC r305284:
Fix array size issue when using the pre-scaling feature for
ISOCHRONOUS USB transfers. Make sure enough length and buffer pointers
are allocated when setting up the libusb transfer structure to support
the maximum number of frames the kernel can handle.
MFC r303893, r303894:
misc replacements of comma with semicolon when pertinent.
Uses of commas instead of a semicolons can easily go undetected. The comma
can serve as a statement separator but this shouldn't be abused when
statements are meant to be standalone.
MFC r303889:
libc/rpc: replace comma with semicolon when pertinent.
Uses of commas instead of a semicolons can easily go undetected. The comma
can serve as a statement separator but this shouldn't be abused when
statements are meant to be standalone.
MFC r303891, r303892:
sys: replace comma with semicolon when pertinent.
Uses of commas instead of a semicolons can easily go undetected. The comma
can serve as a statement separator but this shouldn't be abused when
statements are meant to be standalone.
2) Prevent out of bounds access to ws[-1] (passed buffer) which happens
when the first mb sequence is incomplete and there are not enougn chars in
the read buffer. ws[-1] may lead to memory faults or false results, in
case the memory here contains '\n'.
3) Fix n == 1 case. Here should be no physical read (fill buffer) attempt
(we read n - 1 chars with the room for NUL, see fgets()),
and no NULL return.
In existing implementations including FreeBSD, there is no reason to use
readdir_r() in the common case where potentially multiple threads each list
their own directory. Code using readdir() is simpler.
What's more, although readdir_r() can safely be used on FreeBSD because
NAME_MAX is forced to 255, it cannot be used safely on systems where
{NAME_MAX} is not fixed. As a concrete example, FAT/NTFS filenames can be up
to 255 UTF-16 code units long, which can be up to 765 UTF-8 bytes.
Deprecating readdir_r() in POSIX has been proposed in
http://www.austingroupbugs.net/view.php?id=696
and glibc wants to deprecate it as well.
dim [Wed, 7 Sep 2016 19:25:08 +0000 (19:25 +0000)]
MFC r305389:
With clang 3.9.0, compiling sys/netinet/igmp.c results in the following
warning:
sys/netinet/igmp.c:546:21: error: implicit conversion from 'int' to 'char' changes value from 148 to -108 [-Werror,-Wconstant-conversion]
p->ipopt_list[0] = IPOPT_RA; /* Router Alert Option */
~ ^~~~~~~~
sys/netinet/ip.h:153:19: note: expanded from macro 'IPOPT_RA'
#define IPOPT_RA 148 /* router alert */
^~~
This is because ipopt_list is an array of char, so IPOPT_RA is wrapped
to a negative value. It would be nice to change ipopt_list to an array
of u_char, but it changes the signature of the public struct ipoption,
so add an explicit cast to suppress the warning.
dim [Wed, 7 Sep 2016 19:17:03 +0000 (19:17 +0000)]
MFC r305360:
With clang 3.9.0, compiling cxgb results in the following warning:
sys/dev/cxgb/cxgb_sge.c:2873:44: error: implicit conversion from 'int'
to 'char' changes value from 128 to -128 [-Werror,-Wconstant-conversion]
*mtod(m, char *) = CPL_ASYNC_NOTIF;
~ ^~~~~~~~~~~~~~~
This is because CPL_ASYNC_NOTIF is 0x80, so the plain char argument is
wrapped to a negative value. Fix this by using uint8_t instead.
dim [Wed, 7 Sep 2016 19:02:47 +0000 (19:02 +0000)]
MFC r305345:
With clang 3.9.0, compiling ppbus(4) results in the following warnings:
sys/dev/ppbus/ppb_1284.c:296:46: error: implicit conversion from 'int'
to 'char' changes value from 144 to -112 [-Werror,-Wconstant-conversion]
if ((error = do_peripheral_wait(bus, SELECT | nBUSY, 0))) {
~~~~~~~~~~~~~~~~~~ ~~~~~~~^~~~~~~
sys/dev/ppbus/ppb_1284.c:785:48: error: implicit conversion from 'int'
to 'char' changes value from 240 to -16 [-Werror,-Wconstant-conversion]
if (do_1284_wait(bus, nACK | SELECT | PERROR | nBUSY,
~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~
sys/dev/ppbus/ppb_1284.c:786:29: error: implicit conversion from 'int'
to 'char' changes value from 240 to -16 [-Werror,-Wconstant-conversion]
nACK | SELECT | PERROR | nBUSY)) {
~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~
This is because nBUSY is 0x80, so the plain char argument is wrapped to
a negative value. Fix this in a minimal fashion, by using uint8_t in a
few places.
dim [Wed, 7 Sep 2016 18:33:18 +0000 (18:33 +0000)]
MFC r305085:
Fix warnings in tnftp about invalid constant conversions, e.g.:
contrib/tnftp/src/ftp.c:2067:11: error: implicit conversion from 'int'
to 'char' changes value from 255 to -1 [-Werror,-Wconstant-conversion]
buf[0] = IAC;
~ ^~~
/usr/include/arpa/telnet.h:39:13: note: expanded from macro 'IAC'
#define IAC 255 /* interpret as command: */
^~~
contrib/tnftp/src/ftp.c:2068:11: error: implicit conversion from 'int'
to 'char' changes value from 244 to -12 [-Werror,-Wconstant-conversion]
buf[1] = IP;
~ ^~
/usr/include/arpa/telnet.h:50:12: note: expanded from macro 'IP'
#define IP 244 /* interrupt process--permanently */
^~~
dim [Wed, 7 Sep 2016 18:22:08 +0000 (18:22 +0000)]
MFC r305077:
Squelch clang 3.9.0 warnings about BASE (which is 32768) being converted
to -32768 when it is used as an argument to mp_itom(), in both libtelnet
and newkey. This code has been wrong since r26238 (!), so after almost
20 years it is rather useless to try to correct it.
MFC r305086:
Fix warnings in telnet about invalid constant conversions, e.g.:
contrib/telnet/telnet/commands.c:2914:13: error: implicit conversion
from 'int' to 'char' changes value from 137 to -119
[-Werror,-Wconstant-conversion]
*lsrp++ = IPOPT_SSRR;
~ ^~~~~~~~~~
/usr/include/netinet/ip.h:152:21: note: expanded from macro 'IPOPT_SSRR'
#define IPOPT_SSRR 137 /* strict source route */
^~~
contrib/telnet/telnet/commands.c:2916:13: error: implicit conversion
from 'int' to 'char' changes value from 131 to -125
[-Werror,-Wconstant-conversion]
*lsrp++ = IPOPT_LSRR;
~ ^~~~~~~~~~
/usr/include/netinet/ip.h:148:21: note: expanded from macro 'IPOPT_LSRR'
#define IPOPT_LSRR 131 /* loose source route */
^~~
dim [Wed, 7 Sep 2016 18:16:06 +0000 (18:16 +0000)]
MFC r305218:
Pull in r277331 from upstream llvm trunk (by Diana Picus):
[AArch64] Return the correct size for TLSDESC_CALLSEQ
The branch relaxation pass is computing the wrong offsets because it assumes
TLSDESC_CALLSEQ eats up 4 bytes, when in fact it is lowered to an instruction
sequence taking up 16 bytes. This can become a problem in huge files with lots
of TLS accesses, as it may slowly move branch targets out of the range computed
by the branch relaxation pass.
dim [Wed, 7 Sep 2016 18:06:34 +0000 (18:06 +0000)]
MFC r304920:
In ncurses baudrate definitions, avoid warnings about implicit
conversions from int to short changing the values. This applies to
B38400 and higher, since their values do not fit into a short.
However, since the wrapped values are still unique, and they only serve
as keys, there is no problem in adding a cast to silence the warnings.
This also avoids changing the ABI, which would happen if we changed
NCURSES_OSPEED to int.
andrew [Wed, 7 Sep 2016 13:57:06 +0000 (13:57 +0000)]
MFC 304801:
Don't set *dev in the zfs root case, it may be NULL and will correctly be
set later in the function. This fixes a potential NULL pointer dereference
found on arm64.
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
andrew [Wed, 7 Sep 2016 12:59:08 +0000 (12:59 +0000)]
MFC 303307, 303308, 303309 clean up the arm64 MP code:
- Rework how we number CPUs on arm64 to try and keep clusters together.
- Fix a typo in a string in a KASSERT to sanity check the CPU IDs.
- Remove an unused variable.
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
andrew [Wed, 7 Sep 2016 12:10:30 +0000 (12:10 +0000)]
MFC 302849, 302851, 302896 GICv3 improvements:
- Move internal data structures out of the common header file
- Remove unused data structures and macros
- Add us_print_child to the GICv3 driver
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation