Fixup cross-device rename checks in ZFS. Add a check for the case
where 'fdvp' is a directory, 'tvp' is an already existing directory
and they have different mount points.
Fix callout_init_rm() in the shared case, allocating storage for 'struct
rm_priotracker' directly in the softclock thread. Now consumers can
pass CALLOUT_SHAREDLOCK flag to callout initialization routine safely.
The choice of the already existing flags instead of special casing
shared rmlocks is done to prevent consumer footshooting.
Suggested by: jhb
Reviewed by: jhb
Approved by: re (delphij)
Fix lc_lock/lc_unlock() support for rmlocks held in shared mode. With
current lock classes KPI it was really difficult because there was no
way to pass an rmtracker object to the lock/unlock routines. In order
to accomplish the task, modify the aforementioned functions so that
they can return (or pass as argument) an uinptr_t, which is in the rm
case used to hold a pointer to struct rm_priotracker for current
thread. As an added bonus, this fixes rm_sleep() in the rm shared
case, which right now can communicate priotracker structure between
lc_unlock()/lc_lock().
Suggested by: jhb
Reviewed by: jhb
Approved by: re (delphij)
Merge Xen PVHVM support into the GENERIC kernel config for both
amd64 and i386.
Submitted by: Roger Pau Monné
Sponsored by: Citrix Systems R&D
Reviewed by: gibbs
Approved by: re (blanket Xen)
MFC after: 2 weeks
sys/amd64/amd64/mp_machdep.c:
sys/amd64/include/cpu.h:
sys/i386/i386/mp_machdep.c:
sys/i386/include/cpu.h:
- Introduce two new CPU hooks for initialization and resume
purposes. This allows us to get rid of the XENHVM ifdefs in
mp_machdep, and also sets some hooks into common code that can be
used by other hypervisor implementations.
sys/amd64/conf/XENHVM:
sys/i386/conf/XENHVM:
- Remove these configs now that GENERIC has builtin support for Xen
HVM.
sys/kern/subr_smp.c:
- Make sure there are no pending IPIs when suspending a system.
sys/x86/xen/hvm.c:
- Add cpu init and resume vectors that are called from mp_machdep
using the new hooks.
- Only clear the vcpu_info mapping data on resume. It is already
clear for the BSP on a cold boot and is set correctly as APs
are started.
- Gate xen_hvm_init_cpu only to systems running under Xen.
sys/x86/xen/xen_intr.c:
- Gate the setup of event channels only to systems running under Xen.
Fix GCC build for all ARMs. Revert bug introduced in r255613.
Previous change applied in r255613 fixed build for ARMv6 but
broke it for previous architecture revisions. This commit
eventually fixes GCC build for all ARM revisions.
Approved by: cognet (mentor)
Approved by: re (kib)
Merge the following changes from projects/bhyve_npt_pmap:
- add fields to 'struct pmap' that are required to manage nested page tables.
- add a parameter to 'vmspace_alloc()' that can be used to override the
default pmap initialization routine 'pmap_pinit()'.
These changes are pushed ahead of the remaining changes in 'bhyve_npt_pmap'
in anticipation of the upcoming KBI freeze for 10.0.
Add support for suspend/resume/migration operations when running as a
Xen PVHVM guest.
Submitted by: Roger Pau Monné
Sponsored by: Citrix Systems R&D
Reviewed by: gibbs
Approved by: re (blanket Xen)
MFC after: 2 weeks
sys/amd64/amd64/mp_machdep.c:
sys/i386/i386/mp_machdep.c:
- Make sure that are no MMU related IPIs pending on migration.
- Reset pending IPI_BITMAP on resume.
- Init vcpu_info on resume.
sys/amd64/include/intr_machdep.h:
sys/i386/include/intr_machdep.h:
sys/x86/acpica/acpi_wakeup.c:
sys/x86/x86/intr_machdep.c:
sys/x86/isa/atpic.c:
sys/x86/x86/io_apic.c:
sys/x86/x86/local_apic.c:
- Add a "suspend_cancelled" parameter to pic_resume(). For the
Xen PIC, restoration of interrupt services differs between
the aborted suspend and normal resume cases, so we must provide
this information.
sys/dev/acpica/acpi_timer.c:
sys/dev/xen/timer/timer.c:
sys/timetc.h:
- Don't swap out "suspend safe" timers across a suspend/resume
cycle. This includes the Xen PV and ACPI timers.
sys/dev/xen/control/control.c:
- Perform proper suspend/resume process for PVHVM:
- Suspend all APs before going into suspension, this allows us
to reset the vcpu_info on resume for each AP.
- Reset shared info page and callback on resume.
sys/dev/xen/timer/timer.c:
- Implement suspend/resume support for the PV timer. Since FreeBSD
doesn't perform a per-cpu resume of the timer, we need to call
smp_rendezvous in order to correctly resume the timer on each CPU.
sys/dev/xen/xenpci/xenpci.c:
- Don't reset the PCI interrupt on each suspend/resume.
sys/kern/subr_smp.c:
- When suspending a PVHVM domain make sure there are no MMU IPIs
in-flight, or we will get a lockup on resume due to the fact that
pending event channels are not carried over on migration.
- Implement a generic version of restart_cpus that can be used by
suspended and stopped cpus.
sys/x86/xen/hvm.c:
- Implement resume support for the hypercall page and shared info.
- Clear vcpu_info so it can be reset by APs when resuming from
suspension.
sys/dev/xen/xenpci/xenpci.c:
sys/x86/xen/hvm.c:
sys/x86/xen/xen_intr.c:
- Support UP kernel configurations.
sys/x86/xen/xen_intr.c:
- Properly rebind per-cpus VIRQs and IPIs on resume.
When updating the map of dirty extents, most recently used extents are
kept dirty to reduce the number of on-disk metadata updates. The
sequence of operations is:
1) acquire the activemap lock;
2) update in-memory map;
3) if the list of keepdirty extents is changed, update on-disk metadata;
4) release the lock.
On-disk updates are not frequent in comparison with in-memory updates,
while require much more time. So situations are possible when one
thread is updating on-disk metadata and another one is waiting for the
activemap lock just to update the in-memory map.
Improve this by introducing additional, on-disk map lock: when
in-memory map is updated and it is detected that the on-disk map needs
update too, the on-disk map lock is acquired and the on-memory lock is
released before flushing the map.
Use cv_broadcast() instead of cv_signal() when waking up threads
waiting on an empty queue as the queue may have several consumers.
Before the fix the following scenario was possible: 2 threads are
waiting on empty queue, 2 threads are inserting simultaneously. The
first inserting thread detects that the queue is empty and is going to
send the signal, but before it sends the second thread inserts
too. When the first sends the signal only one of the waiting threads
receive it while the other one may wait forever.
The scenario above is is believed to be the cause of the observed
cases, when ggate_recv_thread() was getting stuck on taking free
request, while the free queue was not empty.
Extend the support for exempting processes from being killed when swap is
exhausted.
- Add a new protect(1) command that can be used to set or revoke protection
from arbitrary processes. Similar to ktrace it can apply a change to all
existing descendants of a process as well as future descendants.
- Add a new procctl(2) system call that provides a generic interface for
control operations on processes (as opposed to the debugger-specific
operations provided by ptrace(2)). procctl(2) uses a combination of
idtype_t and an id to identify the set of processes on which to operate
similar to wait6().
- Add a PROC_SPROTECT control operation to manage the protection status
of a set of processes. MADV_PROTECT still works for backwards
compatability.
- Add a p_flag2 to struct proc (and a corresponding ki_flag2 to kinfo_proc)
the first bit of which is used to track if P_PROTECT should be inherited
by new child processes.
1. Properly clean pid files in the case of the error.
2. Write the supervisor pid before the restart loop, so we don't
uselessly rewrite it after every child restart.
3. Remove duplicate ppfh and pfh initialization.
Add simplistic periodic timer support to mevent using kqueue's
timer support. This should be enough for the emulation of
h/w periodic timers (and no more) e.g. some of the 8254's
more esoteric modes that happen to be used by non-FreeBSD o/s's.
Allow the alarm hours/mins/seconds registers to be read/written,
though without any action. This avoids a hypervisor exit when
o/s's access these regs (Linux).
Fix several problems in the new iSCSI stack; this includes interoperability
fix for LIO (Linux target), removing possibility for the target to avoid mutual
CHAP by choosing to skip authentication altogether, and fixing truncated error
messages in iscsictl(8) output. This also fixes several of the problems found
with Coverity.
Fix panic in ktrcapfail() when no capability rights are passed.
While here, correct all consumers to pass NULL instead of 0 as we pass
capability rights as pointers now, not uint64_t.
Reported by: Daniel Peyrolon
Tested by: Daniel Peyrolon
Approved by: re (marius)
Implement epoll support in Linuxulator. This is a tiny wrapper around kqueue
to implement epoll subset of functionality. The kqueue user data are 32bit
on i386 which is not enough for epoll user data so this patch overrides
kqueue fileops to maintain enough space in struct file.
Initial patch developed by me in 2007 and then extended and finished
by Yuri Victorovich.
Approved by: re (delphij)
Sponsored by: Google Summer of Code
Submitted by: Yuri Victorovich <yuri at rawbw dot com>
Tested by: Yuri Victorovich <yuri at rawbw dot com>
Fix 'make installcheck' to check for missing UID/GID as well, broken
since r249893, by adding a separate _installcheck_world and
_installcheck_kernel so the destination targets can be more explicit
on which they are needed for.
installcheck will call both, while installworld only calls
_installcheck_world and installkernel only calls _installcheck_kernel
While here, mark the internal targets as starting with _.
Reported by: des
Reviewed by: des
Pointyhat to: bdrewery
Approved by: re (delphij)
Disallow cap_enter() in freebsd32 compatibility mode.
The freebsd32 compatibility mode (for running 32-bit binaries on 64-bit
kernels) does not currently allow any system calls in capability mode, but
still permits cap_enter(). As a result, 32-bit binaries on 64-bit kernels
that use capability mode do not work (they crash after being disallowed to
call sys_exit()). Affected binaries include dhclient and uniq. The latter's
crashes cause obscure build failures.
This commit makes freebsd32 cap_enter() fail with [ENOSYS], as if capability
mode was not compiled in. Applications deal with this by doing their work
without capability mode.
This commit does not fix the uncommon situation where a 64-bit process
enters capability mode and then executes a 32-bit binary using fexecve().
This commit should be reverted when allowing the necessary freebsd32 system
calls in capability mode.
Since iconv was enabled (r254273, August 13), it has been impossible to
installworld using a read-only obj tree. This is common with NFS. Parts of
share/i18n unconditionally rebuild files like mapper.dir during
installation.
This patch ensures the files like mapper.dir are not rewritten with the same
contents.
Merge in support for PAPR-compliant (Power Architecture Platform
Requirements) systems from the projects/pseries branch. This in principle
includes all IBM POWER hardware released in the last 15 years with the
exception of POWER3-based systems when run in 64-bit mode. The main
development target, however, has been the PAPR logical partition support
that is the default target in KVM on POWER and QEMU -- mileage may vary
on actual hardware at present. Much of the heavy lifting here was done
by Andreas Tobler.
Fix a bug in decoding an instruction that has an SIB byte as well as an
immediate operand. The presence of an SIB byte in decoding the ModR/M field
would cause 'imm_bytes' to not be set to the correct value.
Fix this by initializing 'imm_bytes' independent of the ModR/M decoding.
Add a loader tunable to use only device tree-provided PCI devices. This is
needed on some more fragile systems to avoid machine checks when blindly
probing the PCI bus. Also reduce ofw_pcibus's priority slightly so that it
can be overridden.
Fix bug in busdma: if segs is a preexisting buffer, we memcpy it
into the DMA map. The length of the buffer had not yet been
initialized, however, so this would copy gibberish unless it
happened to be right by chance. This bug mostly only affected
systems with IOMMUs.
Apply the given advice to the specified range of addresses within the
given pmap. Depending on the advice, clear the referenced and/or
modified flags in each mapping. Superpage within the given range will
be demoted or destroyed.
Reviewed by: alc
Approved by: cognet (mentor)
Approved by: re
Write protect base page after superpage demotion so that it may repromote
When clearing the modification status of the superpage, one of the
base pages produced during demotion should be marked as write disabled.
The intention is that subsequent write access may repromote.
In the current implementation this was done wrong as write permission was
granted instead of forbidden.
Remove zero-copy sockets code. It only worked for anonymous memory,
and the equivalent functionality is now provided by sendfile(2) over
posix shared memory filedescriptor.
Remove the cow member of struct vm_page, and rearrange the remaining
members. While there, make hold_count unsigned.
Requested and reviewed by: alc
Tested by: pho
Sponsored by: The FreeBSD Foundation
Approved by: re (delphij)
In pmap_copy(), when the copied region is mapped with superpage but does
not cover entire superpage, avoid copying. Doing partial copy would
require demotion, which is incompatible with the already held locks.
Reported by: cperciva
Reviewed by: alc
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Approved by: re (delphij)
Use the address of the inpcb rather than the tcpcb to identify TCP
connections. This keeps the tcp provider consistent with the other network
providers.