loos [Sat, 18 Oct 2014 19:01:07 +0000 (19:01 +0000)]
Add a workaround needed to fix a bug of Arasan Host Controller where it may
lose the contents of consecutive writes (that happens within two SD card
clock cycles).
This fixes the causes of instability during the SD card detection and
identification on Raspberry Pi (which happens at 400 kHz and so was much
more vulnerable to this issue).
Remove the previous workaround which clearly can't provide the same effect.
andrew [Sat, 18 Oct 2014 17:51:34 +0000 (17:51 +0000)]
Rework the Ti GPIO code to allow for both the OMAP4 and AM335X attachments
to be present. Thsi creates a new per-SoC driver that handles probe and
setting/getting the gpio flags.
rpaulo [Sat, 18 Oct 2014 16:59:21 +0000 (16:59 +0000)]
Add a driver for the TI watchdog.
The TI watchdog timer is present on BeagleBone's. Since 2014, U-Boot
has been booting the BeagleBone with the watchdog enabled. We need to
disable it on boot to avoid a spurious reset.
The timer isn't exactly precise, but it will do as a watchdog. This
is also a reflection of the watchdog(9) API.
In the future, we could handle interrupts, but the watchdog(9) API
needs to be a bit smarter before that can happen.
markj [Fri, 17 Oct 2014 19:04:24 +0000 (19:04 +0000)]
Use pmc_destroy_pmc_descriptor() to actually free the pmc, which is
consistent with pmc_destroy_owner_descriptor(). Also be sure to destroy
PMCs if a process exits or execs without explicitly releasing them.
imp [Fri, 17 Oct 2014 13:20:49 +0000 (13:20 +0000)]
Fix build to not bogusly always rebuild vmm.ko.
Rename vmx_assym.s to vmx_assym.h to reflect that file's actual use
and update vmx_support.S's include to match. Add vmx_assym.h to the
SRCS to that it gets properly added to the dependency list. Add
vmx_support.S to SRCS as well, so it gets built and needs fewer
special-case goo. Remove now-redundant special-case goo. Finally,
vmx_genassym.o doesn't need to depend on a hand expanded ${_ILINKS}
explicitly, that's all taken care of by beforedepend.
With these items fixed, we no longer build vmm.ko every single time
through the modules on a KERNFAST build.
tychon [Fri, 17 Oct 2014 11:37:50 +0000 (11:37 +0000)]
Support stopping and restarting the AHCI command list via toggling
PxCMD.ST from '1' to '0' and back. This allows the driver a chance to
recover if for instance a timeout occurred due to activity on the
host.
hrs [Fri, 17 Oct 2014 09:33:09 +0000 (09:33 +0000)]
Add -x waittime and -X timeout options for feature parity. These are
equivalent to -W and -t options of ping(8). Different letters are used
because both have already been used for another purposes in ping6(8).
imp [Fri, 17 Oct 2014 04:36:53 +0000 (04:36 +0000)]
move linux*_locore.s and linux*_support.s to SRCS, remove the OBJS
entry and remove now-redunant dependencies. Add assym.s to
linux*_locore.s build, as it depends on it.
With this change, linux*.ko no longer builds every time through a
KERNFAST run.
imp [Fri, 17 Oct 2014 04:36:48 +0000 (04:36 +0000)]
Don't depend on @ or machine for assym.s or genassym.o. That's a
vestige of a time when we needed to do that, but it is all handled by
beforedepend now. When we depend on the symlink, bmake will cause the
file to be rebuilt always.
With this change, dtrace.ko doesn't rebuild every time through a
KERNFAST run.
imp [Thu, 16 Oct 2014 19:52:12 +0000 (19:52 +0000)]
fwsectors and fwheads used to be somehwat arbitrary. However, they are
used to align partitions in gpart. We also try to align partitions by
stripe size when creating new media. Align these two concepts by
making fwsectors the same as the stripe size. Select a sensible number
of heads so we wind up with about 20 cylinders. This number was
selected to keep the rounding effects to a few percent while keeping
the number of cylinder groups low.
Sadly, it is not possible to make these numbers match the numbers used
by SD card readers. There apperas to be much variation between brands
so there's no one universal number. These numbers are also not aligned
to the stripe size, so some performance problems may still be present
when SD cards are created this way.
Also, these numbers will differ from the far less common SD to ATA
adapters, which present a different, but more uniform, set of numbers
that also happened to match the old defaults.
Nothing should change for current users. Any suboptimal performance
caused by misalignment will still be there. gpart will honor the
partitions that aren't on proper boudnaries, but editing the partition
tables may result in different alignments being used than before when
editing things natively.
Ideally, there'd be some way to override these values in the disk
subsystem by the user for the USB adapter use case where all "native"
notions of geometry disappear. This does not implement that.
emaste [Thu, 16 Oct 2014 18:49:50 +0000 (18:49 +0000)]
Update vt(4) for UEFI defaults and special keys
vt(4) is the default console for UEFI boot [1], and the bitmapped
kern.vt.spclkeys sysctl has been replaced with individual kern.vt.kbd_*
enable sysctls.
PR: 193710
Submitted by: wblock [1]
Reviewed by: wblock
MFC after: 3 days
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D953
davide [Thu, 16 Oct 2014 18:04:43 +0000 (18:04 +0000)]
Follow up to r225617. In order to maximize the re-usability of kernel code
in userland rename in-kernel getenv()/setenv() to kern_setenv()/kern_getenv().
This fixes a namespace collision with libc symbols.
brooks [Thu, 16 Oct 2014 15:59:00 +0000 (15:59 +0000)]
Regenerate src.conf.5 after:
r273170:
MK_ARB_EABI was removed in r272350 so remove the documentation.
r273171:
Per r273155, HYPERV is built by default on platforms where it makes
sense and ignored on others.
r273172:
Document that WITHOUT_TOOLCHAIN causes headers to not be installed, not
just programs.
tuexen [Thu, 16 Oct 2014 15:36:04 +0000 (15:36 +0000)]
Fix the reported streams in a SCTP_STREAM_RESET_EVENT, if a
sent incoming stream reset request was responded with failed
or denied.
Thanks to Peter Bostroem from Google for reporting the issue.
andrew [Thu, 16 Oct 2014 13:49:54 +0000 (13:49 +0000)]
Fix the type of pte_pa as when it is passed into _kvm_pa2off it is either
a uint64_t or a pointer to an off_t. With it being a u_long can result in
incorrect values being returned.
araujo [Thu, 16 Oct 2014 02:24:19 +0000 (02:24 +0000)]
Add two sysctl(8) to enable/disable NFSv4 server to check when setting
user nobody and/or setting group nogroup as owner of a file or directory.
Usually at the client side, if there is an username that is not in the
client's passwd database, some clients will send 'nobody@<your.dns.domain>'
in the wire and the NFSv4 server will treat it as an ERROR.
However, if you have a valid user nobody in your passwd database,
the NFSv4 server will treat it as a NFSERR_BADOWNER as its believes the
client doesn't has the username mapped.
smh [Thu, 16 Oct 2014 02:23:27 +0000 (02:23 +0000)]
Prevent ZFS leaking pool free space
When processing async destroys ZFS would leak space every txg timeout
(5 seconds by default), if no writes occurred, until the pool is totally
full. At this point it would be unfixable without a pool recreation.
In addition if the machine was rebooted with the pool in this situation
would fail to import on boot, hanging indefinitely, as the import process
requires the ability to write data to the pool. Any attempts to query the
pool status during the hung import would not return as the import holds
the pool lock.
The only way to import such a pool would be to specify -o readonly=on
to the zpool import.
zdb -bb <pool> can be used to check for "deferred free" size which is where
this lost space will be counted.
jhibbits [Thu, 16 Oct 2014 01:32:22 +0000 (01:32 +0000)]
Move the adm1030 driver to the proper location, and rename it.
For compatibility, 'device windtunnel' is still supported, but one should use
'device adm1030' instead, and this has been updated in GENERIC and NOTES.
imp [Thu, 16 Oct 2014 00:33:06 +0000 (00:33 +0000)]
HYPERV isn't available on all architectures, but just on by default
for i386/amd64. Rather, it only works on i386/amd64 and should only be
built there. Rather than change the default based on which
architecutre, do things more directly by only building it on
i386/amd64 and having it always on. This is how we handle other
options that are relevant only for a few architectures.
hselasky [Wed, 15 Oct 2014 13:40:29 +0000 (13:40 +0000)]
Update the OFED Linux compatibility layer and
Mellanox hardware driver(s):
- Properly name an inclusion guard
- Fix compile warnings regarding unsigned enums
- Add two new sysctl nodes
- Remove all empty linux header files
- Make an error printout more verbose
- Use "mod_delayed_work()" instead of
cancelling and starting a timeout.
- Implement more Linux scatterlist
functions.
MFC after: 3 days
Sponsored by: Mellanox Technologies
kib [Wed, 15 Oct 2014 13:16:51 +0000 (13:16 +0000)]
When vnode bypass cannot be performed on the cdev file descriptor for
read/write/poll/ioctl, call standard vnode filedescriptor fop. This
restores the special handling for terminals by calling the deadfs VOP,
instead of always returning ENXIO for destroyed devices or revoked
terminals.
Since destroyed (and not revoked) device would use devfs_specops VOP
vector, make dead_read/write/poll non-static and fill VOP table with
pointers to the functions, to instead of VOP_PANIC.
Noted and reviewed by: bde
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
kib [Wed, 15 Oct 2014 13:08:53 +0000 (13:08 +0000)]
Change the deadfs poll VOP to return POLLIN|POLLRDNORM if the caller
is interested in i/o state. Return POLLNVAL for invalid bits, similar
to poll_no_poll(). Note that POLLOUT must not be returned, since
POLLHUP is set.
Noted and reviewed by: bde
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
trasz [Wed, 15 Oct 2014 09:28:45 +0000 (09:28 +0000)]
Make automountd(8) inform autofs(4) whether directory being handled can
have wildcards. This makes it possible for autofs(4) to avoid requesting
automountd(8) action on access to nonexistent nodes - unless wildcards
are actually used.
Note that this change breaks ABI for automountd(8).
Tested by: dhw@
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
des [Wed, 15 Oct 2014 07:35:50 +0000 (07:35 +0000)]
As pointed out by several people, r273114 was incorrect: it unconditionally
disabled everything except TLS 1.0. Replace it with a more carefully
wrought patch:
- Switch the default for SSLv3 from on to off
- Add environment variables to control TLS 1.1 and 1.2
- In verbose mode, report which version is used
- Update the man page to reflect these changes.
adrian [Wed, 15 Oct 2014 01:22:56 +0000 (01:22 +0000)]
Set the DROP_EN bit before the RX queue is brought up and active.
He noticed issues setting this bit in SRRCTL after the queue was up,
so doing it from the sysctl handler isn't enough and may not actually
work correctly.
This commit doesn't remove the sysctl path or try to change its
behaviour. I'll talk with others about how to finish fixing that
before I tackle that.
PR: kern/194311
Submitted by: luigi
MFC after: 3 days
Sponsored by: Norse Corp, Inc
neel [Tue, 14 Oct 2014 18:34:15 +0000 (18:34 +0000)]
Use '-e' to check if the virtio backing file has already been created.
The '-f' check works fine on a regular file but not if the backing file is
a device (e.g., /dev/md0). In this case it would print a misleading but
otherwise benign message about the backing file not being present.
Submitted by: Marcus Reid (marcus@blazingdot.com)
Discussed with: grehan
gjb [Tue, 14 Oct 2014 15:22:46 +0000 (15:22 +0000)]
Merge the following from ^/projects/release-vmimage:
r273076, r273077, r273079, r273095:
r273076:
Add a separate make(1) target to release/Makefile to
build FreeBSD virtual machine disk images for use on
the Microsoft Azure service.
For now, this target is not directly connected to the
build, however can be manually invoked.
The 'vm-azure' target invokes {amd64,i386}/mk-azure.sh,
which does the heavy lifting to produce proper VHDs.
mk-azure.sh uses a configuration file, defaulting to
tools/azure.conf if otherwise unset.
r273077:
Clear VM_RC_LIST.
r273079:
Fix signal list to trigger umount(8).
r273095:
Output an informational message when mkimg(1) runs, so it
does not appear that the process has stopped while waiting
for a 'y/n' response when waagent is deprovisioned.
Tested on: releng/10.1@r272876
MFC after: 3 days
X-MFC-10.1: yes
Sponsored by: The FreeBSD Foundation
gjb [Tue, 14 Oct 2014 15:03:06 +0000 (15:03 +0000)]
Merge the following from ^/projects/release-vmimage:
r272436, r272437, r272792:
r272436:
Remove the first argument to panic(), which was initially
intended to be the exit code, however when a non-zero exit
code was returned to release/Makefile, this would prevent
any remaining (and possibly successful) stages from being
attempted.
r272437:
If the vm-base target fails, prevent the vm-image target
from being run since it cannot possibly succeed.
r272792:
Add /usr/local/bin and /usr/local/sbin to PATH, needed
if third-party software needs to use utilities outside
of the base system during post-install stages (indexinfo
is one culprit).
MFC after: 3 days
X-MFC-10.1: yes
Sponsored by: The FreeBSD Foundation