jhb [Mon, 24 Jun 2013 18:30:44 +0000 (18:30 +0000)]
Disable hw.pci.realloc_bars by default. It wasn't needed for the original
tester of this fix, and realloc_bars breaks some other cases as a small
BAR that is reallocated can end up grabbing space needed by a much larger
BAR in the existing window of a PCI-PCI bridge.
yongari [Mon, 24 Jun 2013 05:18:31 +0000 (05:18 +0000)]
When RX checksum offloading is active, AX88772B will prepend a
checksum header. The header contains a received frame length but
the defined length for AX88772B is different with other ASIX
controllers. When the RX checksum is off, AX88772B controller does
not prepend a checksum header so driver has to use normal header
length mask.
This change should fix RX errors when RX checksum offloading is
off.
rmacklem [Mon, 24 Jun 2013 02:19:23 +0000 (02:19 +0000)]
Add a new "-o" option to the gssd which forces gss_init_sec_context()
to use DES and the associated old style GSS initialization token.
This appears to be required for some non-FreeBSD servers to
get a kerberized NFS mount to work. Also, ignore some signals when daemonized,
which might fix the gssd from "disappearing" without leaving a core dump.
Given the tight timeframe for the FreeBSD9.2 release, I have
committed this while waiting for code review. I will commit
changes recommended by the review in a separate commit.
gjb [Sun, 23 Jun 2013 20:19:00 +0000 (20:19 +0000)]
Add a new macro, release.current.release, to denote the head/ branch
with the -RELEASE suffix. This fixes the incorrect text on the -CURRENT
errata page from showing '10.0-CURRENT' followed by 'until 9.1-RELEASE is
released.'
dteske [Sun, 23 Jun 2013 10:51:26 +0000 (10:51 +0000)]
Add a newline character to the end of the "Check URL again" error message
because long URLs do not induce extra height despite wrapping by dialog(1).
NOTE: For even longer lines, the cursor up/down keys work to scroll through
dteske [Sun, 23 Jun 2013 10:48:26 +0000 (10:48 +0000)]
Merge r248313 from stable/9 sysinstall(8) to head bsdconfig(8):
Add support for installation directly via HTTP.
While we're here, remove the menu-item for Passive FTP (since moving to
ftp(1) and switching FTPMODE to `auto' by default -- see r251613 -- the
single remaining FTP menu-item works for both ftp.f.o and ftp-archive.f.o;
previously each requiring separately active versus passive both work with
the `auto' setting). In scripting you still have mediaSetFTPActive and
mediaSetFTPPassive but the remaining FTP menu-item uses mediaSetFTP which
defaults to `auto' (aforementioned SVN r251613).
pfg [Sun, 23 Jun 2013 02:44:42 +0000 (02:44 +0000)]
Define and use e2fs_lbn_t in ext2fs.
In line to what is done in UFS, define an internal type
e2fs_lbn_t for the logical block numbers.
This change is basically a no-op as the new type is unchanged
(int32_t) but it may be useful as bumping this may be required
for ext4fs.
Also, as pointed out by Bruce Evans:
-Use daddr_t for daddr in ext2_bmaparray(). This seems to
improve reliability with the reallocblks option.
- Add a cast to the fsbtodb() macro as in UFS.
dteske [Sat, 22 Jun 2013 03:50:14 +0000 (03:50 +0000)]
Oops, previous revision (r252084) broke non-full-path resolution (e.g.,
ftp://ftp.freebsd.org or ftp://ftp.freebsd.org/). Now both full-path and
non-full resolution is working regardless of trailing-slash.
dteske [Sat, 22 Jun 2013 03:44:49 +0000 (03:44 +0000)]
Trim the trailing `/' from the ftp_dir when validating that the directory
exists on the FTP server. This now means that when you specify a full-path
to the repository on the FTP server that it doesn't matter whether you have
a trailing `/' or not.
dteske [Sat, 22 Jun 2013 02:57:52 +0000 (02:57 +0000)]
Take advantage of the fact that f_getvar evaluates the $var_to_get parameter
within braces, allowing all manner of parameter expansions (properly quoted
or escaped, of course).
rmacklem [Fri, 21 Jun 2013 22:46:16 +0000 (22:46 +0000)]
The NFSv4.1 LayoutCommit operation requires a valid offset and length.
(0, 0 is not sufficient) This patch a loop for each file layout, using
the offset, length of each file layout in a separate LayoutCommit.
rmacklem [Fri, 21 Jun 2013 22:26:18 +0000 (22:26 +0000)]
When the NFSv4.1 client is writing to a pNFS Data Server (DS), the
file's size attribute does not get updated. As such, it is necessary
to invalidate the attribute cache before clearing NMODIFIED for pNFS.
rmacklem [Fri, 21 Jun 2013 19:41:30 +0000 (19:41 +0000)]
Since some NFSv4 servers enforce the requirement for a reserved port#,
enable use of the (no)resvport mount option for NFSv4. I had thought
that the RFC required that non-reserved port #s be allowed, but I couldn't
find it in the RFC.
gonzo [Fri, 21 Jun 2013 18:16:54 +0000 (18:16 +0000)]
Rename run(4) firmware file from runfw to run.fw. Previous name was the
same as top-level target name for "device runfw" kernel option and
caused cyclic dependancy that lead to kernel build breakage
Module change is not strictly required and done for name unification sake
PR: conf/175751
Submitted by: Issei <i10a at herbmint.jp>
delphij [Fri, 21 Jun 2013 17:23:19 +0000 (17:23 +0000)]
Call sshd_precmd instead of sshd_configtest when the operator
requests reload or restart, which, in addition of testing the
configuration, will also generate host keys when they are not
present (previous behavior).
jeff [Thu, 20 Jun 2013 19:08:12 +0000 (19:08 +0000)]
- Add a per-zone lock for zones without kegs.
- Be more explicit about zone vs keg locking. This functionally changes
almost nothing.
- Add a size parameter to uma_zcache_create() so we can size the buckets.
- Pass the zone to bucket_alloc() so it can modify allocation flags
as appropriate.
- Fix a bug in zone_alloc_bucket() where I missed an address of operator
in a failure case. (Found by pho)
hrs [Thu, 20 Jun 2013 14:30:16 +0000 (14:30 +0000)]
- Add "-f file" support to listing mode (-l). When a -f option is
specified, only md(4) devices which have the specified file as backing
store are displayed.
- Use MD_NAME instead of "md".
- Use _PATH_DEV instead of "/dev/".
dteske [Thu, 20 Jun 2013 05:51:44 +0000 (05:51 +0000)]
When the fall-back of a case-statement is the last thing executed in a
while-loop _and_ all prior matches in the same case-statement either break
or continue, we can safely break the fall-back out of the case-statement.
This should improve readability and allow for longer-lines by reducing the
level of indentation by-one for the fall-back case.
(a continuation of SVN r252019)
dteske [Thu, 20 Jun 2013 05:48:08 +0000 (05:48 +0000)]
When the fall-back of a case-statement is the last thing executed in a
while-loop _and_ all prior matches in the same case-statement either break
or continue, we can safely break the fall-back out of the case-statement.
This should improve readability and allow for longer-lines by reducing the
level of indentation by-one for the fall-back case.
hrs [Thu, 20 Jun 2013 02:29:49 +0000 (02:29 +0000)]
- Add CIDR notation support like 192.168.1-2.10-16/24 to $ifconfig_IF_aliasN.
This is an extended version of ipv4_addr_IF which supports both IPv4 and
IPv6, and multiple range specifications. To avoid to generate too many
addresses, the maximum number of the generated addresses is currently
limited to 31.
- Add $ifconfig_IF_aliases, which accepts multiple IP aliases in a variable.
- ipv6_prefix_IF now supports !/64 prefix length. In addition to the old
64-bit format (2001:db8:1:1), a full 128-bit format like 2001:db8:1:1::/64
is supported.
- Replace ifconfig command with $IFCONFIG_CMD variable to support
a dry-run mode in the future.
- Remove IP aliases before removing all of IPv4 addresses when doing
"rc.d/netif down".
- Add a DAD wait to network6_getladdr() because it is possible to fail to
configure an EUI64 address when ipv6_prefix_IF is specified.
A summary of the supported ifconfig_* variables is as follows:
# IPv4 configuration.
ifconfig_em0="inet 192.168.0.1"
# IPv6 configuration.
ifconfig_em0_ipv6="inet6 2001:db8::1/64"
# IPv4 address range spec. Now deprecated.
ipv4_addr_em0="10.2.1.1-10"
# IPv6 alias.
ifconfig_em0_alias0="inet6 2001:db8:5::1 prefixlen 70"
# IPv4 alias.
ifconfig_em0_alias1="inet 10.2.2.1/24"
# IPv4 alias with range spec w/o AF keyword (backward compat).
ifconfig_em0_alias2="10.3.1.1-10/32"
# IPv6 alias with range spec.
ifconfig_em0_alias3="inet6 2001:db8:20-2f::1/64"
# ifconfig_IF_aliases is just like ifconfig_IF_aliasN.
ifconfig_em0_aliases="inet 10.3.3.201-204/24 inet6 2001:db8:210-213::1/64 inet 10.1.1.1/24"
# IPv6 alias (backward compat)
ipv6_ifconfig_em0_alias0="inet6 2001:db8:f::1/64"
# IPv6 alias w/o AF keyword (backward compat)
ipv6_ifconfig_em0_alias1="2001:db8:f:1::1/64"
# IPv6 prefix.
ipv6_prefix_em0="2001:db8::/64"
kib [Wed, 19 Jun 2013 04:47:41 +0000 (04:47 +0000)]
The SUSv4tc1 requires that pthread_setcancelstate() shall be not a
cancellation point. When enabling the cancellation, only process the
pending cancellation for asynchronous mode.
Reported and reviewed by: Kohji Okuno <okuno.kohji@jp.panasonic.com>
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
lstewart [Wed, 19 Jun 2013 03:08:01 +0000 (03:08 +0000)]
When a previous call to sbsndptr() leaves sb->sb_sndptroff at the start of an
mbuf that was fully consumed by the previous call, the mbuf ptr returned by the
current call ends up being the previous mbuf in the sb chain to the one that
contains the data we want.
This does not cause any observable issues because the mbuf copy routines happily
walk the mbuf chain to get to the data at the moff offset, which in this case
means they effectively skip over the mbuf returned by sbsndptr().
We can't adjust sb->sb_sndptr during the previous call for this case because the
next mbuf in the chain may not exist yet. We therefore need to detect the
condition and make the adjustment during the current call.
Fix by detecting the special case of moff being at the start of the next mbuf in
the chain and adjust the required accounting variables accordingly.
dteske [Wed, 19 Jun 2013 00:13:54 +0000 (00:13 +0000)]
Change a humongous if-statement at the end of f_install_zoneinfo_file() into
an early return, allowing a huge chunk of code to be indented one-level less
dteske [Wed, 19 Jun 2013 00:08:29 +0000 (00:08 +0000)]
When I first wrote the timezone module, it was in sysutils/tzdialog and it
pre-dates bsdconfig. Update the code to take advantage of f_dialog_msgbox().
dteske [Tue, 18 Jun 2013 23:48:05 +0000 (23:48 +0000)]
Change the f_dialog_{yesno,noyes}() function-arguments in `dialog.subr' to
accomodate an $hline value for overriding the default. This change does
not effect any current modules as it turns out that not one single usage of
either f_dialog_yesno() or f_dialog_noyes() relied on accepting more than a
first argument (read: all occurrences quoted the first parameter; so $* was
never depended upon).
This will allow some custom invocations of --yesno and --noyes to roll over
to these functions (for example, in `timezone/timezone').
jfv [Tue, 18 Jun 2013 21:28:19 +0000 (21:28 +0000)]
Add quad port probe support, this gives the admin proper information about the slot
(which should be a PCIE Gen 3 slot for this adapter) by looking back thru the PCI
parent devices to the slot device.
The fix above also corrects the bandwidth display to GT/s rather than the
incorrect Gb/s
Next, allow the use of ALTQ if you select the compile option IXGBE_LEGACY_TX.
Allow the use of 'unsupported' optic modules by a compile option as well.
Add a phy reset capability into the stop code, this is so a static configured
driver will still behave properly when taken down (not being able to unload it).
This revision synchronizes the shared code with Intel internal current code,
and note that it now includes DCB supporting code, this was necessitated by
some internal changes with the code, but it also will provide the opportunity
to develop this feature in the core driver down the road.
I have edited the README to get rid of some of the worse anachronisms in it
as well, its by no means as robust as I might wish at this point however.
Oh, I also have included some conditional stuff in the code so it will be
compatible in both the 9.X and 10 environments.
Performance has been a focus in recent changes and I believe this revision
driver will perform very well in most workloads.
kib [Tue, 18 Jun 2013 20:19:09 +0000 (20:19 +0000)]
On some generations of the Intel GPU, disabling of the VGA Display
stops updating the vertical retrace indicator. The text mouse
renderer in syscons is executing from the callout and spins waiting
for the start of next frame. As result, after the X server finishes,
since the VGA cannot be turned on, but syscons does not know about
this, the clock swi spins forever.
Hack around the problem by disabling wait for the retrace if KMS is
activated.
Diagnosed and tested by: Michiel Boland <boland37@xs4all.nl>
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
kib [Tue, 18 Jun 2013 20:02:52 +0000 (20:02 +0000)]
Since the gem pagefault handler relocks the vm object lock, other
thread might fault on the same GTT offset meantime and instantiate the
mapping. Recheck that the mgt device object still does not have a
page at the current offset after relocking, and return a possibly
installed page.
Reported by: Oleg Sidorkin <osidorkin@gmail.com>
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
sjg [Tue, 18 Jun 2013 19:35:51 +0000 (19:35 +0000)]
Fix use after free bug.
Parse_SetInput:
curFile->fname was using the buffer passed to it - which ReadMakefile frees.
This change makes the comment in ParseEOF about leaking curFile->fname true.