jhb [Wed, 5 Feb 2014 17:41:00 +0000 (17:41 +0000)]
- Update a few places to account for va_copy().
- Create a separate 'return values' section and move some statements about
return values to that section.
- Note that each invocation of va_start() and va_copy() must be paired with
va_end() in the same function.
mav [Wed, 5 Feb 2014 16:22:02 +0000 (16:22 +0000)]
Fix I/O freezes in some cases, caused by r257916.
Delaying isp_reqodx update, we should be ready to update it every time
we read it. Otherwise requests using several indexes may be requeued
ndefinitely without ever updating the variable.
nwhitehorn [Wed, 5 Feb 2014 14:44:22 +0000 (14:44 +0000)]
Move Open Firmware device root on PowerPC, ARM, and MIPS systems to
a sub-node of nexus (ofwbus) rather than direct attach under nexus. This
fixes FDT on x86 and will make coexistence with ACPI on ARM systems easier.
SPARC is unchanged.
jhb [Wed, 5 Feb 2014 14:33:22 +0000 (14:33 +0000)]
Partially revert r52493 and change client side interval statistics to
report the actual number of RPCs issued, not the theoretical number
that would be issued if all caching was disabled.
hselasky [Wed, 5 Feb 2014 08:02:52 +0000 (08:02 +0000)]
Fix a regression issue. Contiguous single segment allocations above
PAGE_SIZE bytes should only use one USB page structure. Fixes a
problem with some external drivers.
jhb [Wed, 5 Feb 2014 04:39:03 +0000 (04:39 +0000)]
Add support for FreeBSD/i386 guests under bhyve.
- Similar to the hack for bootinfo32.c in userboot, define
_MACHINE_ELF_WANT_32BIT in the load_elf32 file handlers in userboot.
This allows userboot to load 32-bit kernels and modules.
- Copy the SMAP generation code out of bootinfo64.c and into its own
file so it can be shared with bootinfo32.c to pass an SMAP to the i386
kernel.
- Use uint32_t instead of u_long when aligning module metadata in
bootinfo32.c in userboot, as otherwise the metadata used 64-bit
alignment which corrupted the layout.
- Populate the basemem and extmem members of the bootinfo struct passed
to 32-bit kernels.
- Fix the 32-bit stack in userboot to start at the top of the stack
instead of the bottom so that there is room to grow before the
kernel switches to its own stack.
- Push a fake return address onto the 32-bit stack in addition to the
arguments normally passed to exec() in the loader. This return
address is needed to convince recover_bootinfo() in the 32-bit
locore code that it is being invoked from a "new" boot block.
- Add a routine to libvmmapi to setup a 32-bit flat mode register state
including a GDT and TSS that is able to start the i386 kernel and
update bhyveload to use it when booting an i386 kernel.
- Use the guest register state to determine the CPU's current instruction
mode (32-bit vs 64-bit) and paging mode (flat, 32-bit, PAE, or long
mode) in the instruction emulation code. Update the gla2gpa() routine
used when fetching instructions to handle flat mode, 32-bit paging, and
PAE paging in addition to long mode paging. Don't look for a REX
prefix when the CPU is in 32-bit mode, and use the detected mode to
enable the existing 32-bit mode code when decoding the mod r/m byte.
pjd [Tue, 4 Feb 2014 21:43:53 +0000 (21:43 +0000)]
Protect ping(8) using Capsicum and Casper. This is protection against malicious
network packets that we parse and not against local users trying to gain root
access through ping's set-uid bit - this is handled by dropping privileges very
early in ping.
rmh [Tue, 4 Feb 2014 21:23:12 +0000 (21:23 +0000)]
Abort when firmware isn't present in R600+ models.
More details at:
http://anonscm.debian.org/viewvc/kernel/dists/trunk/linux/debian/patches/bugfix/all/radeon-firmware-is-required-for-drm-and-kms-on-r600-onward.patch?revision=20909&view=co
imp [Tue, 4 Feb 2014 18:28:58 +0000 (18:28 +0000)]
Implement the '!' operator for files* files. It means 'include this
only if the specified option is NOT specified.' Bump version because
old config won't be able to cope with files* files that have this
construct in them.
imp [Tue, 4 Feb 2014 18:24:25 +0000 (18:24 +0000)]
Bump the version of config to the latest (3 year old, so upgrade
worries are long past). Also remove redundant MACHINE= declarations
and passing MACHINE/MACHINE_ARCH to module builds. That's now done in
common code.
ambrisko [Tue, 4 Feb 2014 17:35:41 +0000 (17:35 +0000)]
Add a tunable "hw.mfi.mrsas_enable" to allow mfi(4) to drop priority and
allow mrsas(4) from LSI to attach to newer LSI cards that are support by
mrsas(4). If mrsas(4) is not loaded into the system at boot then mfi(4)
will always attach. If a modified mrsas(4) is loaded in the system. That
modification is return "-30" in it's probe since that is between
BUS_PROBE_DEFAULT and BUS_PROBE_LOW_PRIORITY.
This option is controller by a new probe flag "MFI_FLAGS_MRSAS" in mfi_ident
that denotes cards that should work with mrsas(4). New entries that should
have this option.
This is the first step to get mrsas(4) checked into FreeBSD and to avoid
collision with people that use mrsas(4) from LSI. Since mfi(4) takes
priority, then mrsas(4) users need to rebuild GENERIC. Using the
.disabled="1" method doesn't work since that blocks attaching and the
probe gave it to mfi(4).
neel [Tue, 4 Feb 2014 02:45:08 +0000 (02:45 +0000)]
Avoid doing unnecessary nested TLB invalidations.
Prior to this change the cached value of 'pm_eptgen' was tracked per-vcpu
and per-hostcpu. In the degenerate case where 'N' vcpus were sharing
a single hostcpu this could result in 'N - 1' unnecessary TLB invalidations.
Since an 'invept' invalidates mappings for all VPIDs the first 'invept'
is sufficient.
Fix this by moving the 'eptgen[MAXCPU]' array from 'vmxctx' to 'struct vmx'.
If it is known that an 'invept' is going to be done before entering the
guest then it is safe to skip the 'invvpid'. The stat VPU_INVVPID_SAVED
counts the number of 'invvpid' invalidations that were avoided because
they were subsumed by an 'invept'.
imp [Mon, 3 Feb 2014 19:14:36 +0000 (19:14 +0000)]
Convert the loop by gotos into a for loop to improve readability. I
did this only with the inner loop for the token parsing, and not the
outer loop which was understandable enough when the extra layers of
looping went away...
imp [Mon, 3 Feb 2014 19:10:33 +0000 (19:10 +0000)]
Fix a bug introduced in r261437 that failed to honor "optional
profiling-routine" to work, since profiling-routine is not really an
option or a device, but a special case elsewhere in the code.
loos [Mon, 3 Feb 2014 17:25:36 +0000 (17:25 +0000)]
Fix a logic error. Because of this inflateReset() wasn't being called and
the output buffer wasn't being cleared between the inflate() calls,
producing zeroed output after the first inflate() call.
This fixes the read of mkuzip(8) images with geom_uncompress(4).
imp [Mon, 3 Feb 2014 16:54:53 +0000 (16:54 +0000)]
Move the check for standard keyword + optional inclusion specifier to
its proper location. Otherwise you could have 'file.c standard pci'
without an error. This construct isn't in our tree, and has no well
defined meaning.
imp [Mon, 3 Feb 2014 16:47:10 +0000 (16:47 +0000)]
Don't believe we have a requirement until after we've checked all the
known key words. This will make error messages slightly better in
weird corner cases, but should otherwise be a nop.
imp [Mon, 3 Feb 2014 15:10:44 +0000 (15:10 +0000)]
Slightly deobfuscate read_file() and likely pessimize the runtime
performance by epsilon.
(Translation: elminate bogus macros that hid 'returns' making it hard
to read and moved a block of code inline rather than at the end of the
fuction where it was effectively a 'gosub' kind of goto).
bapt [Mon, 3 Feb 2014 08:13:44 +0000 (08:13 +0000)]
Apply patch for CVE-2013-6393 [1] to fix heap-based buffer overflow when
parsing YAML tags.
Also apply a patch for hardenning the guards againt the issue
The only user in base in yaml is pkg(7) which uses the library a way that it is not affected
cognet [Sun, 2 Feb 2014 23:29:51 +0000 (23:29 +0000)]
Only use the CPU ID register if SMP is defined. Some non-MPCore armv6 cpu,
such as the one found in the RPi, don't have it, and just hang when we try
to access it.
cognet [Sun, 2 Feb 2014 20:58:23 +0000 (20:58 +0000)]
Change the way pcpu and curthread are stored per-core:
the old way was to store pcpu in a register, and get curthread from pcpu,
which is not very atomic, and led to issues if the thread was migrated
to another core between the time we got the pcpu address and the time we
got curthread.
Instead, we now store curthread where pcpu used to be store, and we
calculate the pcpu address based on the cpu id.
alc [Sun, 2 Feb 2014 20:21:53 +0000 (20:21 +0000)]
Make prefaulting more aggressive on hard faults. Previously, we would only
map a fraction of the pages that were fetched by vm_pager_get_pages() from
secondary storage. Now, we map them all in order to avoid future soft
faults. This effect is most evident when a memory-mapped file is accessed
sequentially. Previously, there were 6 soft faults for every hard fault.
Now, these soft faults are eliminated.
ian [Sun, 2 Feb 2014 19:17:28 +0000 (19:17 +0000)]
Follow r261352 by updating all drivers which are children of simplebus
to check the status property in their probe routines.
Simplebus used to only instantiate its children whose status="okay"
but that was improper behavior, fixed in r261352. Now that it doesn't
check anymore and probes all its children; the children all have to
do the check because really only the children know how to properly
interpret their status property strings.
Right now all existing drivers only understand "okay" versus something-
that's-not-okay, so they all use the new ofw_bus_status_okay() helper.
ian [Sun, 2 Feb 2014 16:56:40 +0000 (16:56 +0000)]
Be more robust with malformed interrupt config data. Instead of crashing
or going into a near-infinite loop, warn and make potentially-reasonable
assumptions.
nwhitehorn [Sun, 2 Feb 2014 16:41:54 +0000 (16:41 +0000)]
Add a set of helpers (ofw_bus_get_status() and ofw_bus_status_okay()) to
process "status" properties of OF nodes.
I've avoided adding new KOBJ methods here so that we don't have to modify
every ofw_bus in the tree. Since 100% of implementations of ofw_bus use
only ofw_bus_gen_*(), it might be worth garbage-collecting the other
methods as well.
bryanv [Sun, 2 Feb 2014 05:15:36 +0000 (05:15 +0000)]
Do not place the sglist used for Rx/Tx on the stack
The sglist segment array has grown to a bit over 512 bytes (on
64-bit system) which is more than ideally should be put on the
stack. Instead allocate an appropriately sized sglist and hang
it off each Rx/Tx queue structure.
Bump the maximum number of Tx segments to 64 to make it unlikely
we'll have defragment an mbuf chain. Our previous count was
rounded up to this value since it is the next power of two, so
effective memory usage should not change.
Also only allocate the maximum number of Tx segments if TSO was
negotiated.
ian [Sun, 2 Feb 2014 00:48:15 +0000 (00:48 +0000)]
Update all arm code that manipulates the PSR registers to use modern syntax.
It turns out the version of gas we're using interprets the old '_all' mask
as 'fc' instead of 'fsxc'. That is, "all" doesn't really mean "all".
This was the cause of the "wrong-endian register restore" bug that's
been causing problems with some cortex-a9 chips. The 'endian' bit in the
spsr register would never get changed (it falls into the 'x' mask group)
and the first return-from-exception would fail if the chip had powered on
with garbage in the spsr register that included the big-endian bit. It's
unknown why this affected only certain cortex-a9 chips.
nwhitehorn [Sat, 1 Feb 2014 20:56:50 +0000 (20:56 +0000)]
Switch default Book-E scheduler to ULE, which works now, and enable
CAPABILITIES stuff required to make ssh work.
Hopefully, Book-E can eventually be added to GENERIC, which would avoid
this kind of issue with bitrot. That will require figuring out how to link
Book-E and AIM kernels at the same address, however...
nwhitehorn [Sat, 1 Feb 2014 17:41:54 +0000 (17:41 +0000)]
Provide a simpler and more standards-compliant simplebus implementation to
get the Routerboard 800 up and running with the vendor device tree. This
does not implement some BERI-specific features (which hopefully won't be
necessary soon), so move the old code to mips/beri, with a higher attach
priority when built, until MIPS interrupt domain support is rearranged.
nwhitehorn [Sat, 1 Feb 2014 17:17:35 +0000 (17:17 +0000)]
Open Firmware interrupt specifiers can consist of arbitrary-length byte
strings and include arbitrary information (IRQ line/domain/sense). When the
ofw_bus_map_intr() API was introduced, it assumed that, as on most systems,
these were either 1 cell, containing an interrupt line, or 2, containing
a line number plus a sense code. It turns out a non-negligible number of
ARM systems use 3 (or even 4!) cells for interrupts, so make this more
general.
jhibbits [Sat, 1 Feb 2014 02:03:50 +0000 (02:03 +0000)]
Add hwpmc(4) support for the PowerPC 970 class processors, direct events.
This also fixes asserts on removal of the module for the mpc74xx.
The PowerPC 970 processors have two different types of events: direct events
and indirect events. Thus far only direct events are supported. I included
some documentation in the driver on how indirect events work, but support is
for the future.