This commit has evolved from the original work to include Capsicum
integration. As part of that, it only opens the host audio devices once
and leaves them open, instead of opening and closing them on each guest
access. Thanks to Peter Grehan and Marcelo Araujo for their help in
bringing the work forward and providing some of the final techncial push.
Submitted by: Alex Teaca <iateaca@freebsd.org>
Differential Revision: D7840, D12419
emaste [Mon, 24 Jun 2019 17:25:14 +0000 (17:25 +0000)]
vtfontcvt: improve .bdf validation
Previously if we had a FONTBOUNDINGBOX or DWIDTH entry that had missing
or invalid values and and failed sscanf, we would proceeded with
partially initialized bounding box / device width variables.
Reported by: afl (FONTBOUNDINGBOX)
MFC with: r349100
Sponsored by: The FreeBSD Foundation
ian [Mon, 24 Jun 2019 01:42:09 +0000 (01:42 +0000)]
Build an armv7 LINT kernel in addition to armv5 LINT. You might think this
had been done years ago. I did. All this time we've only compiled a LINT
kernel for TARGET_ARCH=arm. Now separate LINT-V5 and LINT-V7 configs are
generated and built.
There are two new files in arm/conf, NOTES.armv5 and NOTES.armv7, containing
some of what used to be in the arm NOTES file. That file now contains only
the bits that are common to v5 and v7.
The makeLINT.mk file now creates the LINT-V5 and LINT-V7 files by concatening
sys/conf/NOTES, arm/conf/NOTES, and arm/conf/NOTES.armv{5,7} in that order.
kib [Sun, 23 Jun 2019 21:21:11 +0000 (21:21 +0000)]
amd64 pmap: block on turnstile for lock-less DI.
Port the code to block on turnstile instead of yielding, to lock-less
delayed invalidation. The yield might cause tight loop due to priority
inversion.
Since it is impossible to avoid race between block and wake-up, arm
1-tick callout to wakeup when thread blocks itself.
Reported and tested by: mjg
Reviewed by: alc, markj
Sponsored by: The FreeBSD Foundation
MFC after: 2 months
Differential revision: https://reviews.freebsd.org/D20636
kib [Sun, 23 Jun 2019 21:15:31 +0000 (21:15 +0000)]
Switch to check for effective user id in r349320, and disable dumping
into existing files for sugid processes.
Despite using real user id pronounces the intent, it actually breaks
suid coredumps, while not making any difference for non-sugid
processes. The reason for the breakage is that non-existent core file
is created with the effective uid (unless weird hacks like SUIDDIR are
configured).
Then, if user enabled kern.sugid_coredump, core dumping should not
overwrite core files owned by effective uid, but we cannot pretend to
use real uid for dumping.
PR: 68905
admbugs: 358
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
mav [Sun, 23 Jun 2019 19:05:01 +0000 (19:05 +0000)]
Improve AHCI Enclosure Management and SES interoperation.
Since SES specs do not define mechanism to map enclosure slots to SATA
disks, AHCI EM code I written many years ago appeared quite useless,
that always bugged me. I was thinking whether it was a good idea, but
if LSI HBAs do that, why I shouldn't?
This change introduces simple non-standard mechanism for the mapping
into both AHCI EM and SES code, that makes AHCI EM on capable controllers
(most of Intel's) a first-class SES citizen, allowing it to report disk
physical path to GEOM, show devices inserted into each enclosure slot in
`sesutil map` and `getencstat`, control locate and fault LEDs for specific
devices with `sesutil locate adaX on` and `sesutil fault adaX on`, etc.
I've successfully tested this on Supermicro X10DRH-i motherboard connected
with sideband cable of its S-SATA Mini-SAS connector to SAS815TQ backplane.
It can indicate with LEDs Locate, Fault and Rebuild/Remap SES statuses for
each disk identical to real SES of Supermicro SAS2 backplanes.
ian [Sun, 23 Jun 2019 17:23:56 +0000 (17:23 +0000)]
Add the rtc8583 driver to conf/files. Also, move sy8106a from
file.allwinner to conf/files... it's not allwinner-specific, some day
other platforms could use the same regulator chip.
arichardson [Sun, 23 Jun 2019 10:47:07 +0000 (10:47 +0000)]
Fix two WARNS=6 warnings in opendir.c and telldir.c
This is in preparation for compiling these files as part of rtld (which is
built with WARNS=6). See https://reviews.freebsd.org/D20663 for more details.
sevan [Sat, 22 Jun 2019 22:34:59 +0000 (22:34 +0000)]
Remove question mark from the link between NetBSD & Darwin.
As linked to in bug 26137 as a source
https://web.archive.org/web/20001012121507/http://www.opensource.apple.com/projects/darwin/faq.html
mentions:
"We already synchronize our code periodically with NetBSD for most of our user commands"
alc [Sat, 22 Jun 2019 16:26:38 +0000 (16:26 +0000)]
Introduce pmap_remove_l3_range() and use it in two places:
(1) pmap_remove(), where it eliminates redundant TLB invalidations by
pmap_remove() and pmap_remove_l3(), and (2) pmap_enter_l2(), where it may
optimize the TLB invalidations by batching them.
dougm [Sat, 22 Jun 2019 03:16:01 +0000 (03:16 +0000)]
Modify swapon(8) to invoke BIO_DELETE to trim swap devices, either if
'-E' appears on the swapon command line, or if "trimonce" appears as
an fstab option.
vangyzen [Sat, 22 Jun 2019 01:20:45 +0000 (01:20 +0000)]
VirtIO SCSI: validate seg_max on attach
Until r349278, bhyve presented a seg_max to the guest that was too large.
Detect this case and clamp it to the virtqueue size. Otherwise, we would
fail the "too many segments to enqueue" assertion in virtqueue_enqueue().
I hit this by running a guest with a MAXPHYS of 256 KB.
mav [Sat, 22 Jun 2019 01:06:41 +0000 (01:06 +0000)]
Make ELEMENT INDEX validation more strict.
SES specifications tell: "The Additional Element Status descriptors shall
be in the same order as the status elements in the Enclosure Status
diagnostic page". It allows us to question ELEMENT INDEX that is lower
then values we already processed. There are many SAS2 enclosures with
this kind of problem.
While there, add more specific error messages for cases when ELEMENT INDEX
is obviously wrong. Also skip elements with INVALID bit set.
scottl [Fri, 21 Jun 2019 23:40:26 +0000 (23:40 +0000)]
Refactor xpt_getattr() to make it more readable. No outwardly
visible functional changes, though code flow was modified a bit
internally to lessen the need for goto jumps and chained if
conditionals.
mav [Fri, 21 Jun 2019 23:29:16 +0000 (23:29 +0000)]
Fix individual_element_index when some type has 0 elements.
When some type has 0 elements, saved_individual_element_index was set
to -1 on second type bump, since individual_element_index was not
restored after the first. To me it looks easier just to increment
saved_individual_element_index separately than think when to save it.
vangyzen [Fri, 21 Jun 2019 18:57:33 +0000 (18:57 +0000)]
bhyve: Fix vtscsi maximum segment config
The seg_max value reported to the guest should be two less than the
host's maximum, in order to leave room for the request and the
response. This is analogous to r347033 for virtio_block.
We hit the "too many segments to enqueue" assertion on OneFS because
we increase MAXPHYS to 256 KB.
johalun [Fri, 21 Jun 2019 18:48:07 +0000 (18:48 +0000)]
LinuxKPI: Additions to rcu list.
- Add rcu list functions.
- Make rcu hlist's foreach macro use rcu calls instead of the non-rcu macro.
- Bump FreeBSD version so we have a checkpoint for the vboxvideo drm driver.
ian [Fri, 21 Jun 2019 15:12:17 +0000 (15:12 +0000)]
Do some general cleanup and light wordsmithing.
Sort methods alphabetically. Wrap long lines. Start sentences on a new
line. Remove contractions (not because it's a good idea, just to silence
igor). Add some explanation of the units for the period and duty arguments
and the convention for channel numbers.
ian [Fri, 21 Jun 2019 14:46:43 +0000 (14:46 +0000)]
Catch up with recent changes in pwmbus(9). The pwm(9) and pwmbus(9)
interfaces were unified into pwmbus(9), and the PWMBUS_CHANNEL_MAX method
was renamed PWMBUS_CHANNEL_COUNT. The pwmbus_attach_bus() function just
went away completely. Also, fix a few typos such as s/is/if/.
ian [Fri, 21 Jun 2019 14:24:33 +0000 (14:24 +0000)]
Add support for the PWM(9) API. This allows configuring the pwm output using
pwm(9), but also maintains the historical sysctl config interface for
compatiblity with existing apps. The two config systems are not compatible
with each other; if you use both interfaces to change configurations you're
likely to end up with incorrect output or none at all.
ian [Fri, 21 Jun 2019 14:01:02 +0000 (14:01 +0000)]
Some mundane tweaks and cleanups to help de-clutter the diffs of some
upcoming functional changes.
Add an ofw_compat_data table for probing compat strings, and use it to add
PNP data. Remove some stray semicolons at the end of macro definitions,
and add a PWM_LOCK_ASSERT macro to round out the usual suite. Move the
device_t and driver_methods structs to the end of the file. Tweak comments.
emaste [Fri, 21 Jun 2019 13:42:40 +0000 (13:42 +0000)]
nandsim: correct test to avoid out-of-bounds access
Previously nandsim_chip_status returned EINVAL iff both of user-provided
chip->ctrl_num and chip->num were out of bounds. If only one failed the
bounds check arbitrary memory would be read and returned.
The NAND framework is not built by default, nandsim is not intended for
production use (it is a simulator), and the nandsim device has root-only
permissions.
admbugs: 827
Reported by: Daniel Hodson of elttam
MFC after: 3 days
Security: kernel information leak or DoS
Sponsored by: The FreeBSD Foundation
ae [Fri, 21 Jun 2019 10:54:51 +0000 (10:54 +0000)]
Add "tcpmss" opcode to match the TCP MSS value.
With this opcode it is possible to match TCP packets with specified
MSS option, whose value corresponds to configured in opcode value.
It is allowed to specify single value, range of values, or array of
specific values or ranges. E.g.
# ipfw add deny log tcp from any to any tcpmss 0-500
kp [Fri, 21 Jun 2019 07:58:08 +0000 (07:58 +0000)]
ip_output: pass PFIL_FWD in the slow path
If we take the slow path for forwarding we should still tell our
firewalls (hooked through pfil(9)) that we're forwarding. Pass the
ip_output() flags to ip_output_pfil() so it can set the PFIL_FWD flag
when we're forwarding.
imp [Fri, 21 Jun 2019 03:49:36 +0000 (03:49 +0000)]
Mount and unmount devfs around calls to add packages.
pkg now uses /dev/null for some of its operations. NanoBSD's packaging
stuff didn't mount that for the chroot it ran in, so any config that
added packages would see the error:
pkg: Cannot open /dev/null:No such file or directory
when trying to actually add those packages. It's easy enough for
nanobsd to mount /dev and it won't hurt anything that was already
working and may help things that weren't (like this). I moved the
mount/unmount pair to be in the right push/pop order from the
submitted patch.
PR: 238727
Submitted by: mike tancsa
Tested by: Karl Denninger
cem [Fri, 21 Jun 2019 00:16:30 +0000 (00:16 +0000)]
sys: Remove DEV_RANDOM device option
Remove 'device random' from kernel configurations that reference it (most).
Replace perhaps mistaken 'nodevice random' in two MIPS configs with 'options
RANDOM_LOADABLE' instead. Document removal in UPDATING; update NOTES and
random.4.
takawata [Thu, 20 Jun 2019 23:52:33 +0000 (23:52 +0000)]
Fix the case where no root hub object while host controller object exist in ACPI namespace.
Also you can disable ACPI support for USB by setting
debug.acpi.disabled="usb"
asomers [Thu, 20 Jun 2019 23:07:20 +0000 (23:07 +0000)]
fcntl: fix overflow when setting F_READAHEAD
VOP_READ and VOP_WRITE take the seqcount in blocks in a 16-bit field.
However, fcntl allows you to set the seqcount in bytes to any nonnegative
31-bit value. The result can be a 16-bit overflow, which will be
sign-extended in functions like ffs_read. Fix this by sanitizing the
argument in kern_fcntl. As a matter of policy, limit to IO_SEQMAX rather
than INT16_MAX.
Also, fifos have overloaded the f_seqcount field for a completely different
purpose ever since r238936. Formalize that by using a union type.
Reviewed by: cem
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D20710
brooks [Thu, 20 Jun 2019 21:52:30 +0000 (21:52 +0000)]
Add PROT_MAX to the HISTORY section.
In the case of mmap(), add a HISTORY section. Mention that mmap() and
mprotect()'s documentation predates an implementation. The
implementation first saw wide use in 4.3-Reno, but there seems to be no
easy way to express that in mdoc so stick with 4.4BSD.
mav [Thu, 20 Jun 2019 20:29:42 +0000 (20:29 +0000)]
Optimize xpt_getattr().
Do not allocate temporary buffer for attributes we are going to return
as-is, just make sure to NUL-terminate them. Do not zero temporary 64KB
buffer for CDAI_TYPE_SCSI_DEVID, XPT tells us how much data it filled
and there are also length fields inside the returned data also.
emaste [Thu, 20 Jun 2019 18:30:19 +0000 (18:30 +0000)]
Clarify vm_map_protect max_protection downgrade
As reported in review D20709 by brooks calling vm_map_protect to set a
new max_protection value downgrades existing mappings if necessary (as
opposed to returning an error).
Reported by: brooks
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
brooks [Thu, 20 Jun 2019 18:24:16 +0000 (18:24 +0000)]
Extend mmap/mprotect API to specify the max page protections.
A new macro PROT_MAX() alters a protection value so it can be OR'd with
a regular protection value to specify the maximum permissions. If
present, these flags specify the maximum permissions.
While these flags are non-portable, they can be used in portable code
with simple ifdefs to expand PROT_MAX() to 0.
This change allows (e.g.) a region that must be writable during run-time
linking or JIT code generation to be made permanently read+execute after
writes are complete. This complements W^X protections allowing more
precise control by the programmer.
This change alters mprotect argument checking and returns an error when
unhandled protection flags are set. This differs from POSIX (in that
POSIX only specifies an error), but is the documented behavior on Linux
and more closely matches historical mmap behavior.
In addition to explicit setting of the maximum permissions, an
experimental sysctl vm.imply_prot_max causes mmap to assume that the
initial permissions requested should be the maximum when the sysctl is
set to 1. PROT_NONE mappings are excluded from this for compatibility
with rtld and other consumers that use such mappings to reserve
address space before mapping contents into part of the reservation. A
final version this is expected to provide per-binary and per-process
opt-in/out options and this sysctl will go away in its current form.
As such it is undocumented.
emaste [Thu, 20 Jun 2019 18:19:09 +0000 (18:19 +0000)]
Clarify that vm_map_protect cannot upgrade max_protection
It's implied by the man page's RETURN VALUES section, but be explicit in
the description that vm_map_protect can not set new protection bits that
are already in each entry's max_protection.
Reviewed by: brooks
MFC After: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D20709
asomers [Thu, 20 Jun 2019 14:13:10 +0000 (14:13 +0000)]
Add FIOBMAP2 ioctl
This ioctl exposes VOP_BMAP information to userland. It can be used by
programs like fragmentation analyzers and optimized cp implementations. But
I'm using it to test fusefs's VOP_BMAP implementation. The "2" in the name
distinguishes it from the similar but incompatible FIBMAP ioctls in NetBSD
and Linux. FIOBMAP2 differs from FIBMAP in that it uses a 64-bit block
number instead of 32-bit, and it also returns runp and runb.
Reviewed by: mckusick
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D20705
tuexen [Thu, 20 Jun 2019 12:38:41 +0000 (12:38 +0000)]
The variable names in the description of the port number usage is
inconsistent. This patch fixes that and improves the precision of
the description.
Thanks to Tom Marcoen for reporting the issue and providing an
initial patch, on which this change is based.
mav [Thu, 20 Jun 2019 01:15:33 +0000 (01:15 +0000)]
Add wakeup_any(), cheaper wakeup_one() for taskqueue(9).
wakeup_one() and underlying sleepq_signal() spend additional time trying
to be fair, waking thread with highest priority, sleeping longest time.
But in case of taskqueue there are many absolutely identical threads, and
any fairness between them is quite pointless. It makes even worse, since
round-robin wakeups not only make previous CPU affinity in scheduler quite
useless, but also hide from user chance to see CPU bottlenecks, when
sequential workload with one request at a time looks evenly distributed
between multiple threads.
This change adds new SLEEPQ_UNFAIR flag to sleepq_signal(), making it wakeup
thread that went to sleep last, but no longer in context switch (to avoid
immediate spinning on the thread lock). On top of that new wakeup_any()
function is added, equivalent to wakeup_one(), but setting the flag.
On top of that taskqueue(9) is switchied to wakeup_any() to wakeup its
threads.
As result, on 72-core Xeon v4 machine sequential ZFS write to 12 ZVOLs
with 16KB block size spend 34% less time in wakeup_any() and descendants
then it was spending in wakeup_one(), and total write throughput increased
by ~10% with the same as before CPU usage.
mmacy [Wed, 19 Jun 2019 21:10:13 +0000 (21:10 +0000)]
Tell loader to ignore newer features enabled on the root pool.
There are many new features in ZoF. Most, if not all, do not effect read only usage.
Encryption in particular is enabled at the pool level but used at the dataset level.
The loader obviously will not be able to boot if the boot dataset is encrypted, but
should not care if some other dataset in the root pool is encrypted.
bcran [Wed, 19 Jun 2019 18:47:44 +0000 (18:47 +0000)]
efinet: Defer exclusively opening the network handles
Don't commit to exclusive access to the network device handle by
efinet until the loader has decided to load something through the
network. This allows for the possibility of other users of the
network device.
markj [Wed, 19 Jun 2019 16:09:20 +0000 (16:09 +0000)]
Make zlib encoding messages idempotent.
Otherwise duplicate messages can trigger a reinitialization of the
compression stream while the update thread is running. Also ensure
that the stream is initialized before the update thread may attempt
to use it.
PR: 238333
Reviewed by: cem, rgrimes
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D20673
jtl [Wed, 19 Jun 2019 13:55:00 +0000 (13:55 +0000)]
Add the ability to limit how much the code will fragment the RACK send map
in response to SACKs. The default behavior is unchanged; however, the limit
can be activated by changing the new net.inet.tcp.rack.split_limit sysctl.
Submitted by: Peter Lei <peterlei@netflix.com>
Reported by: jtl
Reviewed by: lstewart (earlier version)
Security: CVE-2019-5599
luporl [Wed, 19 Jun 2019 11:37:43 +0000 (11:37 +0000)]
[PPC] Fix loader input with newer QEMU versions
At least since version 4.0.0, QEMU became bug-compatible with PowerVM's
vty, by inserting a \0 after every \r. As this confuses loader's
interpreter and as a \0 coming from the console doesn't seem reasonable,
it's now being filtered at OFW console input.
zec [Wed, 19 Jun 2019 08:39:19 +0000 (08:39 +0000)]
Evaluating htons() at compile time is more efficient than doing ntohs()
at runtime. This change removes a dependency on a barrel shifter pass
before branch resolution, while reducing the instruction stream size
by 9 bytes on amd64.
scottl [Wed, 19 Jun 2019 06:41:07 +0000 (06:41 +0000)]
Implement VT-d capability detection on chipsets that have multiple
translation units with differing capabilities
From the author via Bugzilla:
---
When an attempt is made to passthrough a PCI device to a bhyve VM
(causing initialisation of IOMMU) on certain Intel chipsets using
VT-d the PCI bus stops working entirely. This issue occurs on the
E3-1275 v5 processor on C236 chipset and has also been encountered
by others on the forums with different hardware in the Skylake
series.
The chipset has two VT-d translation units. The issue is caused by
an attempt to use the VT-d device-IOTLB capability that is
supported by only the first unit for devices attached to the
second unit which lacks that capability. Only the capabilities of
the first unit are checked and are assumed to be the same for all
units.
Attached is a patch to rectify this issue by determining which
unit is responsible for the device being added to a domain and
then checking that unit's device-IOTLB capability. In addition to
this a few fixes have been made to other instances where the first
unit's capabilities are assumed for all units for domains they
share. In these cases a mutual set of capabilities is determined.
The patch should hopefully fix any bugs for current/future
hardware with multiple translation units supporting different
capabilities.
A description is on the forums at
https://forums.freebsd.org/threads/pci-passthrough-bhyve-usb-xhci.65235
The thread includes observations by other users of the bug
occurring, and description as well as confirmation of the fix.
I'd also like to thank Ordoban for their help.
---
Personally tested on a Skylake laptop, Skylake Xeon server, and
a Xeon-D-1541, passing through XHCI and NVMe functions. Passthru
is hit-or-miss to the point of being unusable without this
patch.
bdrewery [Tue, 18 Jun 2019 22:00:38 +0000 (22:00 +0000)]
Rework r349061: Don't apply guessed dependencies if there is a custom target.
This is still targeting bin/sh cyclic dependency issues. Only apply
guessed dependencies that are explicitly set for an object (which
gnu/lib/cc/cc_tools needs) and if no custom target exists with its
own dependencies.
This was manifesting as a missing yacc.h in usr.bin/mkesdb_static when
built without -j (or -B). No actual yacc.h dependency ordering was
defined but with -j it got lucky and built fine.
Before r349061 the behavior was different for META_MODE but that logic
difference isn't needed.
mav [Tue, 18 Jun 2019 21:05:10 +0000 (21:05 +0000)]
Optimize kern.geom.conf* sysctls.
On large systems those sysctls may generate megabytes of output. Before
this change sbuf(9) code was resizing buffer by 4KB each time many times,
generating tons of TLB shootdowns. Unfortunately in this case existing
sbuf_new_for_sysctl() mechanism, supposed to help with this issue, is not
applicable, since all the sbuf writes are done in different kernel thread.
This change improves situation in two ways:
- on first sysctl call, not providing any output buffer, it sets special
sbuf drain function, just counting the data and so not needing big buffer;
- on second sysctl call it uses as initial buffer size value saved on
previous call, so that in most cases there will be no reallocation, unless
GEOM topology changed significantly.
sevan [Tue, 18 Jun 2019 21:02:40 +0000 (21:02 +0000)]
Mark NetBSD branch points
NetBSD 7.0 was a separate branch, subsequent 8.x releases did not emerge from
this branch.
Clean up minor visual nits, centre OpenBSD listing on the B, DragonFly
listings on the y.
cem [Tue, 18 Jun 2019 18:50:58 +0000 (18:50 +0000)]
random(4): Fix a regression in short AES mode reads
In r349154, random device reads of size < 16 bytes (AES block size) were
accidentally broken to loop forever. Correct the loop condition for small
reads.
vmaffione [Tue, 18 Jun 2019 17:51:30 +0000 (17:51 +0000)]
bhyve: vtnet: fix locking on receive
The vsc_rx_ready and the RX virtqueue is protected by the rx_mtx lock.
However, pci_vtnet_ping_rxq() (currently called only once after each
device reset) accesses those without acquiring the lock.
ian [Tue, 18 Jun 2019 17:05:05 +0000 (17:05 +0000)]
Handle labels specified with hints even on FDT systems. Hints are the
easiest thing for a user to control (via loader.conf or kenv+kldload), so
handle them in addition to any label specified via the FDT data.
emaste [Tue, 18 Jun 2019 14:13:52 +0000 (14:13 +0000)]
Remove sys/capability.h for the third time
In all supported (and most unsupported) FreeBSD versions the appropriate
header for Capsicum is sys/capsicum.h. Software including sys/capability.h
is most likely looking for Linux capabilities based on the withdrawn
POSIX.1e draft.
This header was previously removed in r334929 and r340156, but reverted
each time due to ports failures. These issues have now (broadly) been
addressed.
PR: 228878 [exp-run]
Submitted by: eadler (r334929)
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
ian [Tue, 18 Jun 2019 01:15:00 +0000 (01:15 +0000)]
Rearrange the argument checking and processing so that enable and disable
can be combined with configuring the period and duty cycle (the same ioctl
sets all 3 values at once, so there's no reason to require the user to run
the program twice to get all 3 things set).
ian [Tue, 18 Jun 2019 00:17:10 +0000 (00:17 +0000)]
Explain the relationship between PWM hardware channels being controlled and
pwmc(4) device filenames. Also, use uppercase PWM when the term is being
used as an acronym, and expand the acronym where it's first used.
ian [Tue, 18 Jun 2019 00:11:00 +0000 (00:11 +0000)]
Remove everything related to channels from the pwmc public interface, now
that there is a pwmc(4) instance per channel and the channel number is
maintained as a driver ivar rather than being passed in from userland.
projects / FreeBSD / FreeBSD.git / log