bdrewery [Thu, 3 Mar 2016 18:08:58 +0000 (18:08 +0000)]
DEBUG_FILES: Create the DEBUGFILEDIR if it doesn't exist on install.
Currently the base.txz distribution does not get the BSD.debug.dist mtree
extracted into it. So if you start from that and then try to build a 3rd-party
application outside of buildworld it will by-default try installing the
debug files into a missing directory if they are being installed into /usr/lib.
Check for the existence before forcing the directory to be created rather than
the older way of running a shell command with test -d || mkdir -p always.
gnn [Thu, 3 Mar 2016 17:46:38 +0000 (17:46 +0000)]
Fix dtrace probes (introduced in 287759): debug__input was used
for output and drop; connect didn't always fire a user probe
some probes were missing in fastpath
hselasky [Thu, 3 Mar 2016 08:47:27 +0000 (08:47 +0000)]
Allow for overlapping quirk device ranges. Prior to this patch only
the first device entry matching the USB vendor, product and revision
would be searched for quirks. After this patch all device entries will
be searched for quirks.
jhibbits [Thu, 3 Mar 2016 05:07:35 +0000 (05:07 +0000)]
Replace all resource occurrences of '0UL/~0UL' with '0/~0'.
Summary:
The idea behind this is '~0ul' is well-defined, and casting to uintmax_t, on a
32-bit platform, will leave the upper 32 bits as 0. The maximum range of a
resource is 0xFFF.... (all bits of the full type set). By dropping the 'ul'
suffix, C type promotion rules apply, and the sign extension of ~0 on 32 bit
platforms gets it to a type-independent 'unsigned max'.
Reviewed By: cem
Sponsored by: Alex Perez/Inertial Computing
Differential Revision: https://reviews.freebsd.org/D5255
cxgbe(4): First of many changes to reduce diffs with internal shared
code:
- Rename some CamelCase variables.
- s/t4_link_start/t4_link_l1cfg/g
- Pull in t4_get_port_type_description.
- Move t4_wait_op_done to t4_hw.c.
- Flip the order of the RDMA stats.
- Remove unsused function t4_iq_start_stop.
- Move t4_wait_op_done and t4_wait_op_done_val to t4_hw.c
kib [Wed, 2 Mar 2016 18:46:17 +0000 (18:46 +0000)]
If callout_stop_safe() noted that the callout is currently executing,
but next invocation is cancelled while migrating,
sleepq_check_timeout() needs to be informed that the callout is
stopped. Otherwise the thread switches off CPU and never become
runnable, since running callout could have already raced with us,
while the migrating and cancelled callout could be one which is
expected to set TDP_TIMOFAIL flag for us. This contradicts with the
expected behaviour of callout_stop() for other callers, which
e.g. decrement references from the callout callbacks.
Add a new flag CS_MIGRBLOCK requesting report of the situation as
'successfully stopped'.
kib [Wed, 2 Mar 2016 16:36:24 +0000 (16:36 +0000)]
Fix handling of DT_TEXTREL for an object with more than one read-only
segment. According to gABI spec, presence of the tag indicates that
dynamic linker must be prepared to handle relocations against any
read-only segment, not only the segment which we, somewhat arbitrary,
declared the text.
For each read-only segment, add write permission before relocs are
processed, and return to the mapping mode requested by the phdr, after
relocs are done.
Reported, tested, and reviewed by: emaste
PR: 207631
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
wma [Wed, 2 Mar 2016 09:54:58 +0000 (09:54 +0000)]
Support for Enhanced Allocation in PCI
On some platforms, BAR entries are hardcoded and must not be accessed
using standard method. Add functionality to identify this situation
and configure the bus based on Enhanced Allocation structure.
wma [Wed, 2 Mar 2016 08:39:59 +0000 (08:39 +0000)]
Improve ThunderX PEM driver to work on pass2 revision
Things changed:
* do not allocate 4GB of SLI space, because it's the waste of
system resources. Allocate only small portions when needed.
* provide own implementation of activate_resource which performs
address translation between PCI bus and host PA address space.
This is temporary solution, should be replaced by bus_map_resource
once implemented.
sephe [Wed, 2 Mar 2016 05:24:55 +0000 (05:24 +0000)]
hyperv/hn: Make # of rings configurable
And since the host may not being able to allocate the # of rings
requested by us, save the # of rings allocated by the host in the
ring_inuse counters; use ring_inuse counters for run time operation.
markj [Wed, 2 Mar 2016 05:01:58 +0000 (05:01 +0000)]
Use m_catpkt(9) to avoid a possible use-after-free in ieee80211_defrag().
m is not guaranteed to be valid after m_cat() returns. The effects of this
are most noticeable when INVARIANTS is enabled, since m's header length
field is given a value of 0xdeadc0de by the trash dtor.
markj [Wed, 2 Mar 2016 04:58:51 +0000 (04:58 +0000)]
Document m_catpkt(), and remove misinformation about m_cat(9).
Since m_cat() may copy data from the second mbuf chain into the last mbuf
of the first chain, it may free the first mbuf of the second chain. Thus,
the second chain is not guaranteed to be valid after m_cat() returns.
glebius [Wed, 2 Mar 2016 02:12:01 +0000 (02:12 +0000)]
Fix regression in r296242 affecting several drivers. For EXT_NET_DRV,
EXT_MOD_TYPE, EXT_DISPOSABLE types we should first execute the free
callback, then free the mbuf, otherwise we will derefernce memory that
was just freed.
sephe [Wed, 2 Mar 2016 01:40:47 +0000 (01:40 +0000)]
hyperv/chan: Factor out the vcpu setting
And use it for cpu0 assignment; it does not sound right to assume that
cpu0 maps to vcpu0. And this factored out function will be exposed to
drivers, if driver specific CPU binding is needed, e.g. hn(4).
Move default cpu select after saving channel offer message. This makes
sure that all useful information of the channel has been setup.
jhibbits [Wed, 2 Mar 2016 00:18:05 +0000 (00:18 +0000)]
Fix 2 bugs in the mpc85xx local bus controller driver.
1) Include opt_platform.h to get QORIQ_DPAA. Otherwise the definition of
OCP85XX_TGTIF_LBC is incorrect.
2) The child resources are already allocated, just activate them, instead of
incorrectly remapping the memory regions (resource lists for lbc consist of the
virtual address of the child's resources, not the physical address).
jhb [Tue, 1 Mar 2016 18:12:14 +0000 (18:12 +0000)]
Refactor the AIO subsystem to permit file-type-specific handling and
improve cancellation robustness.
Introduce a new file operation, fo_aio_queue, which is responsible for
queueing and completing an asynchronous I/O request for a given file.
The AIO subystem now exports library of routines to manipulate AIO
requests as well as the ability to run a handler function in the
"default" pool of AIO daemons to service a request.
A default implementation for file types which do not include an
fo_aio_queue method queues requests to the "default" pool invoking the
fo_read or fo_write methods as before.
The AIO subsystem permits file types to install a private "cancel"
routine when a request is queued to permit safe dequeueing and cleanup
of cancelled requests.
Sockets now use their own pool of AIO daemons and service per-socket
requests in FIFO order. Socket requests will not block indefinitely
permitting timely cancellation of all requests.
Due to the now-tight coupling of the AIO subsystem with file types,
the AIO subsystem is now a standard part of all kernels. The VFS_AIO
kernel option and aio.ko module are gone.
Many file types may block indefinitely in their fo_read or fo_write
callbacks resulting in a hung AIO daemon. This can result in hung
user processes (when processes attempt to cancel all outstanding
requests during exit) or a hung system. To protect against this, AIO
requests are only permitted for known "safe" files by default. AIO
requests for all file types can be enabled by setting the new
vfs.aio.enable_usafe sysctl to a non-zero value. The AIO tests have
been updated to skip operations on unsafe file types if the sysctl is
zero.
Currently, AIO requests on sockets and raw disks are considered safe
and are enabled by default. aio_mlock() is also enabled by default.
jhb [Tue, 1 Mar 2016 17:47:32 +0000 (17:47 +0000)]
Remove taskqueue_enqueue_fast().
taskqueue_enqueue() was changed to support both fast and non-fast
taskqueues 10 years ago in r154167. It has been a compat shim ever
since. It's time for the compat shim to go.
Submitted by: Howard Su <howard0su@gmail.com>
Reviewed by: sephe
Differential Revision: https://reviews.freebsd.org/D5131
andrew [Tue, 1 Mar 2016 11:39:07 +0000 (11:39 +0000)]
Make the memory size returned from fdt_get_mem_regions a 64-bit type. This
is the physical memory size so may be larger than a u_long can hold, e.g.
on ARM with LPAE we could see an address space of up to 40 bits. On ARM
u_long is only 32 bits so the memory size will be truncated, possibly to
zero.
skra [Tue, 1 Mar 2016 11:27:58 +0000 (11:27 +0000)]
Remove an alternative way for dealing with root interrupt controller
which is not complete. Likely, it was forgotten and not removed before
committing.
skra [Tue, 1 Mar 2016 10:57:29 +0000 (10:57 +0000)]
Mark other parts of interrupt framework as INTR_SOLO option specific.
Note that isrc_arg member of struct intr_irqsrc is used only for
INTR_SOLO and IPI filter. This should be remembered if IPI filters
and their arguments will be stored on another place.
This option could be unusable very soon, if interrupt controllers
implementations will not be implemented considering it.
wma [Tue, 1 Mar 2016 08:15:00 +0000 (08:15 +0000)]
Enable SRE_EL2 on ARM64
Enable system register access for EL2. Alpine-V2 is
the first device requiring this to be enabled.
It is also in-sync with Linux initialization code,
and compatible with Alpine-V2 uboot requirements.
jhibbits [Tue, 1 Mar 2016 03:41:48 +0000 (03:41 +0000)]
Add another compatibility check for QorIQ GPIO driver.
Some MPC85xx GPIO controllers are compatible with QorIQ.
It may make more sense in the future to rename this and mpc85xx_gpio.c, as
mpc85xx_gpio.c appears to only be compatible with a few mpc85xx SoCs. All other
MPC85xx SoCs use the same controller as QorIQ.
jhibbits [Tue, 1 Mar 2016 02:59:06 +0000 (02:59 +0000)]
Correct the memory rman ranges to be to BUS_SPACE_MAXADDR
Summary:
As part of the migration of rman_res_t to be typed to uintmax_t, memory ranges
must be clamped appropriately for the bus, to prevent completely bogus addresses
from being used.
This is extracted from D4544.
Reviewed By: cem
Sponsored by: Alex Perez/Inertial Computing
Differential Revision: https://reviews.freebsd.org/D5134
cxgbe(4): Update T5 and T4 firmwares to 1.15.28.0.
These firmwares were obtained from the beta "Chelsio T5/T4 Unified Wire
v2.12.0.2 for Linux" release. Changes since last release are listed in the
"Release Notes" accompanying the beta release and are copy-pasted here as well.
The plan is to have only GA'd firmwares in any -STABLE FreeBSD branch so I'll
MFC this (after 2 months) only if it ends up in a GA release.
Version : 1.15.28.0
Date : 02/29/2016
================================================================================
FIXES
-----
BASE:
- Fixed an issue in FW_RSS_VI_CONFIG_CMD handling where the default ingress
queue was ignored.
- Fixed an issue where adapter failed to load fw by adjusting DRAM frequency.
- Fixed an issue in watchdog which was causing VM bring-up failure after
reboot.
- Fixed 40G link failures with some switches when auto-negotiation enabled.
- Fixed to improve on link bring-up time.
- Per port buffer groups size doubled to improve performance.
- Fixed an issue where bogus d3hot bits were set causing traffic stall.
- Fixed an issue where sometimes adapter was not seen after reboot.
- Fixed an issue where iWARP was crashing in conjunction with traffic
management.
- Fixed an issue where link failed to come up after removing twinax cable and
inserting optical module.
OFLD
- Fixed a potential iSCSI data corruption issue by disabling RxFragEn flag.
FOiSCSI
- Fixed an issue in recovery path where connection was getting closed before
recovery processing was done.
- Fixed an issue in TCP port reuse.
- Fixed an issue in recovery path when large number (>64) of iSCSI connections
were in use.
- Returned ENETUNREACH if IP was not been provisioned yet and driver tried to
use given inerface.
ENHANCEMENTS
------------
BASE:
- Added new interface to program DCA settings in SGE contexts; allow 32-byte
IQE size
- Added PTP interface fw_ptp_ts to support PTP Frequeny and Offset adjustment.
- Added MPS raw interface.
ETH:
- New mailbox command FW_DCB_IEEE_CMD api added for IEEE dcbx.
OFLD:
- WR opcode is returned to host in cqe error response.
Version : 1.15.28.0
Date : 02/29/2016
================================================================================
FIXES
-----
BASE:
- Fixed an issue in FW_RSS_VI_CONFIG_CMD handling where default ingress queue
was ignored.
- Fixed an issue in watchdog which was causing VM bring-up failure after
reboot.
- Per port buffer groups size doubled to improve performance.
- Fixed an issue where iWARP was crashing in conjunction with traffic
management.
FOiSCSI:
- Fixed an issue in recovery path where connection was getting closed before
recovery processing was done.
- Fixed an issue in TCP port reuse.
- Fixed an issue in recovery path when large number (>64) of iSCSI connections
were in use.
- Returned ENETUNREACH if IP had not been provisioned yet and driver tried to
use given inerface.
ENHANCEMENTS
------------
BASE:
- Added MPS raw interface.
ETH:
- New mailbox command FW_DCB_IEEE_CMD api added for IEEE dcbx.
glebius [Tue, 1 Mar 2016 00:17:14 +0000 (00:17 +0000)]
New way to manage reference counting of mbuf external storage.
The m_ext.ext_cnt pointer becomes a union. It can now hold the refcount
value itself. To tell that m_ext.ext_flags flag EXT_FLAG_EMBREF is used.
The first mbuf to attach a cluster stores the refcount. The further mbufs
to reference the cluster point at refcount in the first mbuf. The first
mbuf is freed only when the last reference is freed.
The benefit over refcounts stored in separate slabs is that now refcounts
of different, unrelated mbufs do not share a cache line.
For EXT_EXTREF mbufs the zone_ext_refcnt is no longer needed, and m_extadd()
becomes void, making widely used M_EXTADD macro safe.
For EXT_SFBUF mbufs the sf_ext_ref() is removed, which was an optimization
exactly against the cache aliasing problem with regular refcounting.
avos [Mon, 29 Feb 2016 21:09:09 +0000 (21:09 +0000)]
net80211: fix scanning after D5145 (PR 197498 related)
- In case, when we are doing <smth> -> INIT (FEXT_REINIT) -> <smth2>
state transition, cancel_scan() may be called in the first transition.
Reenqueue second state transition, so things will be executed in order.
- Discard any AUTH+ state transition request when INIT -> SCAN
transition is not done.
- Allow to track discarded state transitions via 'state' debugging
category.
Tested with:
* RTL8188EU, HOSTAP mode.
* RTL8188CUS, STA mode.
* Intel 3945BG, IBSS and STA modes.
PR: 197498
Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D5482
projects / FreeBSD / FreeBSD.git / log