MFC r341798:
Use correct size for IPv4 address in gethostbyaddr().
When u_long is 8 bytes, it returns EINVAL and 'ipfw -N show' doesn't work.
Reported by: Claudio Eichenberger <cei at yourshop.com>
MFC r341799:
Rework how protocol number is tracked in rule. Save it when O_PROTO
opcode will be printed. This should solve the problem, when protocol
name is not printed in `ipfw -N show`.
Reported by: Claudio Eichenberger <cei at yourshop.com>
Michal Meloun [Sat, 15 Dec 2018 06:22:48 +0000 (06:22 +0000)]
MFC r341738:
Implement R_AARCH64_TLS_DTPMOD64 and A_AARCH64_TLS_DTPREL64 relocations.
Although these are slightly obsolete in favor of R_AARCH64_TLSDESC, gcc
-mtls-dialect=trad still use them.
Alexander Motin [Fri, 14 Dec 2018 14:49:04 +0000 (14:49 +0000)]
MFC r341829: Allow CTL device specification in bhyve virtio-scsi.
There was a large refactoring done in CTL to allow multiple ioctl frontend
ports (and respective devices) to be created, particularly for bhyve.
Unfortunately, respective part of bhyve functionality got lost somehow from
the original virtio-scsi commit. This change allows wanted device path to
be specified in either of two ways:
-s 6,virtio-scsi,/dev/cam/ctl1.1
-s 6,virtio-scsi,dev=/dev/cam/ctl2.3
If neither is specified, the default /dev/cam/ctl device is used.
While there, remove per-queue CTL device opening, which makes no sense at
this point.
Alexander Motin [Fri, 14 Dec 2018 14:44:38 +0000 (14:44 +0000)]
MFC r341705: Fix several iov handling bugs in bhyve virtio-scsi backend.
- buf_to_iov() does not use buflen parameter, allowing out of bound read.
- buf_to_iov() leaks memory if seek argument > 0.
- iov_to_buf() doesn't need to reallocate buffer for every segment.
- there is no point to use size_t for iov counts, int is more then enough.
- some iov function arguments can be constified.
- pci_vtscsi_request_handle() used truncate_iov() incorrectly, allowing
getting out of buffer and possibly corrupting data.
- pci_vtscsi_controlq_notify() written returned status at wrong offset.
- pci_vtscsi_controlq_notify() leaked one buffer per event.
Michal Meloun [Fri, 14 Dec 2018 10:20:26 +0000 (10:20 +0000)]
MFC r341511,r341512,r341513:
r341511:
Fix style(9). Not a functional change.
r341512:
Implement arm64 version of __tls_get_addr().
r341513:
Tidy up arm64 reloc_jmpslots() implementation.
- don't relocate jump slots multiple times (if LD_BIND_NOW is defined).
- process only R_AARCH64_JUMP_SLOT here, other relocation types are
handled by reloc_plt().
The iflib subsystem implements netmap support in a driver-independent
way (sys/net/iflib.c). We can therefore remove the headers that
used to implement netmap support for all the drivers now supported
by iflib (em, igb, ixl, ixgbe, lem).
Kristof Provost [Thu, 13 Dec 2018 20:00:11 +0000 (20:00 +0000)]
pfsync: Performance improvement
pfsync code is called for every new state, state update and state
deletion in pf. While pf itself can operate on multiple states at the
same time (on different cores, assuming the states hash to a different
hashrow), pfsync only had a single lock.
This greatly reduced throughput on multicore systems.
Address this by splitting the pfsync queues into buckets, based on the
state id. This ensures that updates for a given connection always end up
in the same bucket, which allows pfsync to still collapse multiple
updates into one, while allowing multiple cores to proceed at the same
time.
The number of buckets is tunable, but defaults to 2 x number of cpus.
Benchmarking has shown improvement, depending on hardware and setup, from ~30%
to ~100%.
Eugene Grosbein [Thu, 13 Dec 2018 10:52:40 +0000 (10:52 +0000)]
MFC r340394: ipfw.8: Fix part of the SYNOPSIS documenting
LIST OF RULES AND PREPROCESSING that is still referred
as last section of the SYNOPSIS later but was erroneously situated
in the section IN-KERNEL NAT.
tools: netmap: pkt-gen: check packet length against interface MTU
Validate the value of the -l argument (packet length) against the MTU of the netmap port.
In case the netmap port does not refer to a physical interface (e.g. VALE port or pipe), then
the netmap buffer size is used as MTU.
This change also sets a better default value for the -M option, so that pkt-gen uses
the largest possible fragments in case of multi-slot packets.
The backpressure indication is implemented using an unlimited rate type of
mbuf send tag. When the upper layers typically the socket layer has obtained such
a tag, it can then query the destination driver queue for the current
amount of space available in the send queue.
A single mbuf send tag may be referenced multiple times and a refcount has been added
to the mlx5e_priv structure to track its usage. Because the send tag resides
in the mlx5e_channel structure, there is no need to wait for refcounts to reach
zero until the mlx4en(4) driver is detached. The channels structure is persistant
during the lifetime of the mlx5en(4) driver it belongs to and can so be accessed
without any need of synchronization.
The mlx5e_snd_tag structure was extended to contain a type field, because there are now
two different tag types which end up in the driver which need to be distinguished.
MFC r341585:
mlx5en: Improve configuration of HW LRO.
In order to enable HW LRO, both the "hw_lro" sysctl in the mlx5en(4) config
space must be set, and the ifconfig(8) LRO capability must be set. Any other
settings will disable HW LRO.
MFC r341584:
mlx5en: Count all transmitted and received bytes.
Add counter for all transmitted and received bytes. Currently only all
transmitted and received packets were counted. Fix description of RX LRO
counters while at it.
MFC r341583:
mlx5en: Statically allocate and free the channel structure(s).
By allocating the worst case size channel structure array
at attach time we can eliminate various NULL checks in the
fast path. And also reduce the chance for use-after-free
issues in the transmit fast path.
This change is also a requirement for implementing
backpressure support.
MFC r341582:
mlx5en: Fix race in mlx5e_ethtool_debug_stats().
Writing to the debug stats variable must be locked,
else serialization will be lost which might cause
various kernel panics due to creating and destroying
sysctls out of order.
Make sure the sysctl context is initialized after freeing
the sysctl nodes, else they can be freed twice.
MFC r341580:
mlx5en: Don't set rate on SQs when the SQ is already stopped.
This can happen when connections are short lived and leads to
a firmware error printout in dmesg, syndrome 0x51cfb0, because
the SQ is in the wrong state.
MFC r341579:
mlx5en: Fix for inlining issues in transmit path
1) Don't exceed the drivers own hardcoded TX inline limit.
The blueflame register size can be much greater than the hardcoded limit
for inlining. Make sure we don't exceed the drivers own limit, because this
also means that the maximum number of TX fragments becomes invalid and
then memory size assumptions in the TX path no longer hold up.
2) Make sure the mlx5_query_min_inline() function returns an error code.
3) Header inlining is required when using TSO.
4) Catch failure to compute inline header size for TSO.
5) Add support for UDP when computing inline header size.
6) Fix for inlining issues with regards to DSCP.
Make sure we inline 4 bytes beyond the ethernet and/or
VLAN header to workaround a hardware bug extracting
the DSCP field from the IPv4/v6 header.
MFC r341578 and r341655:
mlx5en: Remove the DRBR and associated logic in the transmit path.
The hardware queues are deep enough currently and using the DRBR and associated
callbacks only leads to more task switching in the TX path. The is also a race
setting the queue_state which can lead to hung TX rings.
MFC r341577:
mlx5en: Implement support for bandwidth limiting in by ratio, ETS.
Add support for setting the bandwidth limit as a ratio rather than in bits per
second. The ratio must be an integer number between 1 and 100 inclusivly.
Implement the needed firmware commands and SYSCTLs through mlx5en(4).
MFC r341570:
mlx5ib: Make sure the congestion work timer does not escape the drain procedure.
If the mlx5_ib_read_cong_stats() function was running when mlx5ib was unloaded,
because this function unconditionally restarts the timer, the timer can still
be pending after the delayed work has been cancelled. To fix this simply loop
on the delayed work cancel procedure as long as it returns non-zero.
MFC r341568:
mlx5ib: Fix sign extension in mlx5_ib_query_device
"fw_rev_min(dev->mdev)" with type "unsigned short" (16 bits, unsigned) is
promoted in "fw_rev_min(dev->mdev) << 16" to type "int" (32 bits, signed), then
sign-extended to type "unsigned long" (64 bits, unsigned). If
"fw_rev_min(dev->mdev) << 16" is greater than 0x7FFFFFFF, the upper bits of the
result will all be 1.
MFC r341566:
mlx5: Fixes to allow command polling mode to exist alongside event mode.
A command is either polling or event driven and the mode cannot change
during execution of a command. Make sure the event handler only handle
commands which are not polled. This is done by checking the command mode
in the command handler before completing commands.
This counter will represent transmitted packets which has more than
1518 octets.
The NIC has multiple hardware counters for counting transmitted
packets larger than 1518 octets. Each counter counts the packets
in specific range.
We accumulate those counters to have a single counter.
MFC r341560:
mlx5: Fix use-after-free in self-healing flow
When the mlx5 health mechanism detects a problem while the driver
is in the middle of init_one or remove_one, the driver needs to prevent
the health mechanism from scheduling future work; if future work
is scheduled, there is a problem with use-after-free: the system WQ
tries to run the work item (which has been freed) at the scheduled
future time.
Prevent this by disabling work item scheduling in the health mechanism
when the driver is in the middle of init_one() or remove_one().
All other mlx5_events report the port number as 1 based, which is how FW
reports it in the port event EQE. Reporting 0 for this event causes
mlx5_ib to not raise a fatal event notification to registered clients
due to a seemingly invalid port.
All switch cases in mlx5_ib_event that go through the port check are
supposed to set the port now, so just do it once at variable
declaration.
MFC r341552:
mlx4en: Optimise reception of small packets.
Copy small packets like TCP ACKs into a new mbuf
reusing the existing mbuf to receive a new ethernet
frame. This avoids wasting buffer space for
small sized packets.
MFC r341547:
mlx4en: Remove the DRBR and associated logic in the transmit path.
The hardware queues are deep enough currently and using the DRBR and associated
callbacks only leads to more task switching in the TX path. The is also a race
setting the queue_state which can lead to hung TX rings.
MFC r341545:
mlx4: Add board identifier and firmware version to sysctl
In last mlx4 update (r325841) we lost the sysctl to show the
firmware version for mlx4 devices.
Add both board identifier and firmware version under:
sys.device.mlx4_core0.hw sysctl node.
MFC r341538:
ipoib: Notify on modify QP failure only when relevant
Modify QP can fail and it can be acceptable, like when moving from RST to
ERR state, all the rest are not acceptable and a message to the log
should be printed.
The current code prints on all failures and many messages like:
"Failed to modify QP to ERROR state" appear, even when supported by the
state machine of the QP object.
MFC r341537:
ipoib: increase the non-cm queue length
When a packet needs fragmentation, it might generate more than 3 fragments.
With the queue length 3, all fragments are generated faster than the
queue is drained, which effectively drops fourth and later fragments on
the floor.
MFC r341536:
ipoib: Don't do a light flush when MTU is unchanged.
When changing the MTU of ibX network interfaces, check that the MTU was really
changed before requesting an update of the multicast rules. Else we might go
into an infinite loop joining and leaving ibX multicast groups towards the
opensm master interface.
MFC r341535:
ipoib: correct setting MTU from inside ipoib(4).
It is not enough to set ifnet->if_mtu to change the interface MTU.
System saves the MTU for route in the radix tree, and route cache keeps
the interface MTU as well. Since addition of the multicast group causes
recalculation of MTU, even bringing the interface up changes MTU from
4042 to 1500, which makes the system configuration inconsistent. Worse,
ip_output() prefers route MTU over interface MTU, so large packets are
not fragmented and dropped on floor.
Fix it for ipoib(4) using the same approach (or hack) as was applied
for it_tun/if_tap in r339012. Thanks to bz@ for giving the hint.
MFC r341534:
ibcore: Fix clearing of bound device interface.
Binding to a loopback device is not allowed. Make sure the destination
device address is global by clearing the bound device interface.
Only do this conditionally, else link local addresses won't work.
Trying to validate loopback fails because rtalloc1() resolves system
local addresses to the loopback network interface, lo0. Fix this by
explicitly checking for loopback during validation of the source
and destination network address. If the source address belongs to
a local network interface and is equal to the destination address,
there is no need to run the destination address through rtalloc1().
The array ib_mad_mgmt_class_table.method_table has MAX_MGMT_CLASS
(80) elements. Hence compare the array index with that value instead
of with IB_MGMT_MAX_METHODS (128). This patch avoids that Coverity
reports the following:
Overrunning array class->method_table of 80 8-byte elements at element index 127
(byte offset 1016) using index convert_mgmt_class(mad_hdr->mgmt_class)
(which evaluates to 127).
The port number in the listen_id_priv has been observed to be zero which
means no port has been selected. The current code lacks a check for invalid
port number.
projects / FreeBSD / FreeBSD.git / log