Alan Somers [Fri, 29 Apr 2016 21:29:37 +0000 (21:29 +0000)]
Fix a use-after-free when "zpool import" fails
clear vd->vdev_tsd in vdev_geom_close_locked instead of vdev_geom_detach.
In the latter function, it would fail to happen in certain circumstances
where cp->private was unset. Ideally, the latter should never happen, but
it can happen when vdev open fails, or where spares are involved.
net80211: provide a set of ieee80211_add_channel*() functions
This change adds few methods for net80211 channel table setup:
- ieee80211_add_channel()
- ieee80211_add_channel_ht40()
(primarily for drivers, that parse EEPROM to get channel list -
they will allow to hide implementation details).
- ieee80211_add_channel_list_2ghz()
- ieee80211_add_channel_list_5ghz()
(mostly as a replacement for ieee80211_init_channels() - they will allow
to specify non-default channel list; may be used in ic_getradiocaps()).
Tested with wpi(4) (add_channel) and rum(4) (add_channel_list_2ghz).
Reviewed by: adrian
Differential Revision: https://reviews.freebsd.org/D6124
Alan Somers [Fri, 29 Apr 2016 21:11:31 +0000 (21:11 +0000)]
Automate the subr_unit test.
Build and install the subr_unit test program originally written by phk, and
run it with the other ATF tests.
tests/sys/kern/Makefile
* Build and install the subr_unit test as a plain test
sys/kern/subr_unit.c
* Reduce the default number of repetitions from 100 to 1, and add a
command-line parser to override it.
* Don't be so noisy by default
* Fix an include problem for the test build
Split ADC driver in two halves: ADC(analog ot digital) and
TSC(touchscreen). Touchscreen driver is fully functional
up to the point of reporting samples. This part will be added
once FreeBSD has API for touchscreen.
Tested on: Beaglebone Black + 4DCAPE-43T
Reviewed by: loos
Differential Revision: https://reviews.freebsd.org/D5847
Adrian Chadd [Fri, 29 Apr 2016 18:53:16 +0000 (18:53 +0000)]
[ath] initialise do_ldpc to 0.
I .. can't believe I missed this.
This showed up because the AP was TX'ing LDPC to an iwm(4) chipset,
which didn't advertise LDPC and doesn't /accept/ LDPC. Amusingly, all
the two other FreeBSD 11n parts I had tested with (AR9380, Intel 7260)
and I completely forgot to test on ye olde hardware.
This is a follow-up to r298789, which removed the B_DIRTY and B_PERSISTENT
flags. This changeset removes them from the associated %b bit description
string as well.
Alan Somers [Fri, 29 Apr 2016 15:23:51 +0000 (15:23 +0000)]
Refactor vdev_geom_attach and friends to reduce code duplication
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/vdev_geom.c
Move checks for provider's sectorsize and mediasize into a single
location in vdev_geom_attach. Remove the zfs::vdev::taste class;
it's ok to use the regular vdev class for tasting. Consolidate guid
checks into a single location in vdev_attach_ok. Consolidate some
error handling code from vdev_geom_attach into vdev_geom_detach,
closing a resource leak of geom consumers in the process.
Add a savecore_enable variable support for the savecore rc script
By default set to 'YES' so it does not change the current behaviour for users,
this variable allows to decide to not extract crach dumps from the dump
device at boot time by setting it to "NO" in rc.conf.
Add function to detect the presence of a port module and use this
function to error out early when no port module is present and doing
eeprom access. This also prevents error codes from filling up in
dmesg.
Note, this change results in the Kyuafile inclusion in the runtime
package, which needs to be fixed, however addresses the PR as far
as I can tell in my tests.
PR: 209114
Submitted by: ngie
Sponsored by: The FreeBSD Foundation
Adrian Chadd [Thu, 28 Apr 2016 20:29:49 +0000 (20:29 +0000)]
[net80211] handle action frames in adhoc mode from the node that created the BSS.
We don't have a separate bss node; instead we dup the first node we saw
and turn that into the BSS node. This means that action frames from
that node would be rejected.
So, check that the node is the bss node /and/ the MAC doesn't match ni_macaddr.
That's the "right" way for now to verify it's an unknown node.
This fixes handling action frames in adhoc mode, which includes negotiating
11n aggregation via ADDBA/DELBA.
This by itself isn't enough to correctly create 11n adhoc networks; but
it is required for aggregation to be negotiated.
Enji Cooper [Thu, 28 Apr 2016 18:41:55 +0000 (18:41 +0000)]
Fix va_list handling
- Add missing va_end's after corresponding va_start's to cleanup state
- Eliminate questionable bzero'ing of va_list passed in to
do_buff_decode(..) and do_encode(..) from buff_{de,en}code_visit(..)
and csio_{de,en}code_visit(..). Make va_list a pointer instead and
pass NULL into the underlying functions to handler this in a portable
way.
- Do some minor style(9) clean up in affected functions.
John Baldwin [Thu, 28 Apr 2016 18:23:18 +0000 (18:23 +0000)]
Add some notes about the implicit resource mapping for activated resources.
Specifically, mention that rman_get_bustag/handle/virtual are valid after
a resource is activated. Also, mention the wrapper API that accepts a
struct resource instead of a bus tag and handle.
Randall Stewart [Thu, 28 Apr 2016 15:53:10 +0000 (15:53 +0000)]
Complete the UDP tunneling of ICMP msgs to those protocols
interested in having tunneled UDP and finding out about the
ICMP (tested by Michael Tuexen with SCTP.. soon to be using
this feature).
Alan Somers [Thu, 28 Apr 2016 15:13:50 +0000 (15:13 +0000)]
Add PACKAGE fields to usr.sbin/extattr/tests/Makefile
usr.sbin/extattr/tests/Makefile
Add boiler plate required by 298107 but omitted by 298483. These
two changes passed through CR in parallel. I think this should get
the full test suite running in Jenkins again.
Randall Stewart [Thu, 28 Apr 2016 13:27:12 +0000 (13:27 +0000)]
This cleans up the timers code in TCP to start using the new
async_drain functionality. This as been tested in NF as well as
by Verisign. Still to do in here is to remove all the old flags. They
are currently left being maintained but probably are no longer needed.
Sponsored by: Netflix Inc.
Differential Revision: http://reviews.freebsd.org/D5924
Michal Meloun [Thu, 28 Apr 2016 12:05:07 +0000 (12:05 +0000)]
ARM: Use kernel pmap as intermediate mapping in context switch.
On ARM, we can directly switch between translation tables only when
the size of the mapping for any given virtual address is the same in
the old and new translation tables. The load of new TTB and subsequent
TLB flush is not atomic operation. So speculative page table walk can
load TLB entry from new mapping while rest of TLB entries are still the
old ones. In worst case, this can lead to situation when TLB cache can
contain multiple matching TLB entries. One (from old mapping) L2 entry
for VA + 4k and one (from new mapping) L1 entry for VA.
Thus, we must switch to kernel pmap translation table as intermediate
mapping because all sizes of these (old pmap and kernel pmap) mappings
are same (or unmapped). The same is true for switch from kernel pmap
translation table to new pmap one.
Michal Meloun [Thu, 28 Apr 2016 12:03:22 +0000 (12:03 +0000)]
GPIO: Add support for gpio pin interrupts.
Add new function gpio_alloc_intr_resource(), which allows an allocation
of interrupt resource associated to given gpio pin. It also allows to
specify interrupt configuration.
Note: This functionality is dependent on INTRNG, and must be
implemented in each GPIO controller.
ensure that initial local apic id is sane on AMD 10h systems
Summary:
The Initial Local APIC ID is returned by CPUID function 1 (in EBX).
On AMD Family 10h systems the way that ID is built is controlled by
an MSR bit (InitApicIdCpuIdLo). BKDG instructs BIOS to set it in a
certain way, but a BIOS can be buggy. In that case the ID can confuse
tools that use it, e.g. hwloc.
For example, on a system that I own real Local APIC IDs are configured
as 0, 1, 2, 3, but IDs reported via CPUID.1 are 0, 0x40, 0x80, 0xc0.
See: https://github.com/open-mpi/hwloc/issues/183
Pedro F. Giffuni [Thu, 28 Apr 2016 02:46:08 +0000 (02:46 +0000)]
ipdivert: Remove unnecessary and incorrectly typed variable.
In principle n is only used to carry a copy of ipi_count, which is
unsigned, in the non-VIMAGE case, however ipi_count can be used
directly so it is not needed at all. Removing it makes things look
cleaner.
Michael Tuexen [Wed, 27 Apr 2016 18:58:47 +0000 (18:58 +0000)]
Don't use the control argument after calling sctp_add_to_readq().
This breaks the userland stack. There should be no functional change
for the FreeBSD kernel stack.
While there, use consistent variable nameing.
John Baldwin [Wed, 27 Apr 2016 16:39:05 +0000 (16:39 +0000)]
Add a pcib_attach_child() method to manage adding the child "pci" device.
This allows the PCI-PCI bridge driver to save a reference to the child
device in its softc.
Note that this required moving the "pci" device creation out of
acpi_pcib_attach(). Instead, acpi_pcib_attach() is renamed to
acpi_pcib_fetch_prt() as it's sole action now is to fetch the PCI
interrupt routing table.
John Baldwin [Wed, 27 Apr 2016 16:33:17 +0000 (16:33 +0000)]
Add 'devctl delete' that calls device_delete_child().
'devctl delete' can be used to delete a device that is no longer present.
As an anti-foot-shooting measure, 'delete' will not delete a device
unless it's parent bus says it is no longer present. This can be
overridden by passing the force ('-f') flag.
Note that this command should be used with care. If a device is deleted
that is actually present it can't be resurrected unless the parent bus
device's driver supports rescans.
John Baldwin [Wed, 27 Apr 2016 16:31:12 +0000 (16:31 +0000)]
Implement a PCI bus rescan method.
Rescanning a PCI bus uses the following steps:
- Fetch the current set of child devices and save it in the 'devlist'
array.
- Allocate a parallel array 'unchanged' initalized with NULL pointers.
- Scan the bus checking each slot (and each function on slots with a
multifunction device).
- If a valid function is found, look for a matching device in the 'devlist'
array. If a device is found, save the pointer in the 'unchanged' array.
If a device is not found, add a new device.
- After the scan has finished, walk the 'devlist' array deleting any
devices that do not have a matching pointer in the 'unchanged' array.
- Finally, fetch an updated set of child devices and explicitly attach any
devices that are not present in the 'unchanged' array.
This builds on the previous changes to move subclass data management into
pci_alloc_devinfo(), pci_child_added(), and bus_child_deleted().
Subclasses of the PCI bus use custom rescan logic explicitly override the
rescan method to disable rescans.
John Baldwin [Wed, 27 Apr 2016 16:29:03 +0000 (16:29 +0000)]
Add a new rescan method to the bus interface.
The BUS_RESCAN() method rescans a single bus device checking for devices
that have been added or removed from the bus. A new 'rescan' command is
added to devctl(8) to trigger a rescan.
Make create_object callback optional and return EOPNOTSUPP when it isn't
defined. Remove eaction_create_compat() and use designated initializers to
initialize eaction_opcodes structure.
Delay revmoing the last jail reference in prison_proc_free, and instead
put it off into the pr_task. This is similar to prison_free, and in fact
uses the same task even though they do something slightly different.
This resolves a LOR between the process lock and allprison_lock, which
came about in r298565.