nwhitehorn [Sun, 1 Jan 2012 15:56:15 +0000 (15:56 +0000)]
Instead of forcing -O1 on PowerPC for LLVM and clang, fix the actual
problem by adding -fno-strict-aliasing to CFLAGS. Since this is a global
issue that just happened to manifest on PowerPC, add this to CFLAGS
unconditionally.
adrian [Sun, 1 Jan 2012 01:08:51 +0000 (01:08 +0000)]
If frames are dumped out of the queue, let's at least see what they are.
This shows that the majority of the weird traffic I see here are probe
frames that haven't been sent out, but I can also trigger this condition
by doing ICMP w/ -i 0.3 - enough to trigger the TX during actual scanning,
but not fast enough to stop scanning from occuring.
ed [Sat, 31 Dec 2011 19:01:48 +0000 (19:01 +0000)]
Upgrade libcompiler_rt to upstream revision 147390.
This version of libcompiler_rt adds support for __mulo[sdt]i4(), which
computes a multiply and its overflow flag. There are also a lot of
cleanup fixes to headers that don't really affect us.
Updating to this revision should make it a bit easier to contribute
changes back to the LLVM developers.
gavin [Sat, 31 Dec 2011 13:24:53 +0000 (13:24 +0000)]
Default to not performing the early-boot memory tests when we detect we
are booting inside a VM. There are three reasons to disable this:
o It causes the VM host to believe that all the tested pages or RAM are
in use. This in turn may force the host to page out pages of RAM
belonging to other VMs, or otherwise cause problems with fair resource
sharing on the VM cluster.
o It adds significant time to the boot process (around 1 second/Gig in
testing)
o It is unnecessary - the host should have already verified that the
memory is functional etc.
Note that this simply changes the default when in a VM - it can still be
overridden using the hw.memtest.tests tunable.
lstewart [Sat, 31 Dec 2011 07:21:28 +0000 (07:21 +0000)]
Revert r228986 until it can be reworked to avoid panicing the kernel when the
same interface is attached multiple times with different DLTs, as is done in
net80211 for example.
sobomax [Sat, 31 Dec 2011 00:09:33 +0000 (00:09 +0000)]
Use in-label sectorsize to determine position of the label when
writing label into a file image. The most common use - putting disklabel
into ISO file. Before this change the label would always go to
the offset 512, while geom_part code expects it to be in the 1st
sector (i.e. 2048 incase of ISO). BSD disklabels provide good and
lightweight way to logically split livecds. It is non-intrusive as
far as ISO9660 goes (both boot-wise and metadata-wise) and
completely transparent to anything but BSD, so you can have
BSD-specific area appended after regular ISO.
And with a little bit of GEOM trickery you can do even more
interesting stuff with it.
For example we make "hybrid" bootable CDs using this method.
We create bootable ISO with kernel and such and append UFS
image compressed with UZIP and it works like a charm. We put
label based on the offsef of the BSD part into the ISO. The kernel
boots off normal ISO9660 part, tastes label attaches it,
tastes UZIP, attaches it and finally mounts UFS using GEOM_LABEL.
This provides much better way of eliminating waste than doing
"crunched" build.
dim [Fri, 30 Dec 2011 20:41:24 +0000 (20:41 +0000)]
Add some additional const poison after r228972. The 'mapping' array in
lib/libc/gen/strtofflags.c became const, but gcc did not warn about
assigning its members to non-const pointers. Clang warned about this
with:
lib/libc/gen/strtofflags.c:98:12: error: assigning to 'char *' from 'const char *' discards qualifiers [-Werror,-Wincompatible-pointer-types]
for (sp = mapping[i].invert ? mapping[i].name :
^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
alc [Fri, 30 Dec 2011 18:16:15 +0000 (18:16 +0000)]
Merge r216333 and r216555 from the native pmap
When r207410 eliminated the acquisition and release of the page queues
lock from pmap_extract_and_hold(), it didn't take into account that
pmap_pte_quick() sometimes requires the page queues lock to be held.
This change reimplements pmap_extract_and_hold() such that it no
longer uses pmap_pte_quick(), and thus never requires the page queues
lock.
Merge r177525 from the native pmap
Prevent the overflow in the calculation of the next page directory.
The overflow causes the wraparound with consequent corruption of the
(almost) whole address space mapping.
Strictly speaking, r177525 is not required by the Xen pmap because the
hypervisor steals the uppermost region of the normal kernel address
space. I am nonetheless merging it in order to reduce the number of
unnecessary differences between the native and Xen pmap implementations.
dim [Fri, 30 Dec 2011 17:18:09 +0000 (17:18 +0000)]
In sys/compat/ndis/subr_ntoskrnl.c, change the RtlFillMemory function
definition from K&R to ANSI, to avoid a clang warning about the uint8_t
parameter being promoted to int, which is not compatible with the type
declared in the earlier prototype.
dumbbell [Fri, 30 Dec 2011 14:33:08 +0000 (14:33 +0000)]
Invalid Domain Search option isn't considered as a fatal error
In the original Domain Search option patch, an invalid option value
would cause the whole lease to be rejected. However, DHCP servers who
emit such an invalid value are more common than I thought. With this new
patch, just the option is rejected, not the entire lease.
adrian [Fri, 30 Dec 2011 09:48:35 +0000 (09:48 +0000)]
Add a configuration file for the Atheros PB47 reference board.
This is an AR71xx based board with 8MB flash, 64MB RAM, a
Mini-PCI+ slot (see below) and a single 10/100/1000baseT
ethernet port. It also has two USB ports.
This is an easier board than most to add as it doesn't have a
switch PHY on-board. This made it (mostly) trivial to craft a
working configuration.
Things to note:
* This, like most other reference boards, use uboot rather then
redboot. It means that you typically have to manually flash
both the kernel and rootfs partitions.
* Since there's currently no (nice) way to extract out the
ethernet MAC and RAM from the uboot environment, the RAM
will default to 32mb and the MAC will be something very
incorrect. I'll try to fix this up in a subsequent commit
or two, even if it's just some hard-coded nonsense in
ar71xx_machdep.c for now.
* The board is designed for a specific model of mini-PCI+
NIC which never made it into production. Normal mini-PCI
NICs will work fine; if you happen to have the NIC in question
then it will work fine with this board.
lstewart [Fri, 30 Dec 2011 08:57:58 +0000 (08:57 +0000)]
- Introduce the net.bpf.tscfg sysctl tree and associated code so as to make one
aspect of time stamp configuration per interface rather than per BPF
descriptor. Prior to this, the order in which BPF devices were opened and the
per descriptor time stamp configuration settings could cause non-deterministic
and unintended behaviour with respect to time stamping. With the new scheme, a
BPF attached interface's tscfg sysctl entry can be set to "default", "none",
"fast", "normal" or "external". Setting "default" means use the system default
option (set with the net.bpf.tscfg.default sysctl), "none" means do not
generate time stamps for tapped packets, "fast" means generate time stamps for
tapped packets using a hz granularity system clock read, "normal" means
generate time stamps for tapped packets using a full timecounter granularity
system clock read and "external" (currently unimplemented) means use the time
stamp provided with the packet from an underlying source.
- Utilise the recently introduced sysclock_getsnapshot() and
sysclock_snap2bintime() KPIs to ensure the system clock is only read once per
packet, regardless of the number of BPF descriptors and time stamp formats
requested. Use the per BPF attached interface time stamp configuration to
control if sysclock_getsnapshot() is called and whether the system clock read
is fast or normal. The per BPF descriptor time stamp configuration is then
used to control how the system clock snapshot is converted to a bintime by
sysclock_snap2bintime().
- Remove all FAST related BPF descriptor flag variants. Performing a "fast"
read of the system clock is now controlled per BPF attached interface using
the net.bpf.tscfg sysctl tree.
- Update the bpf.4 man page.
Committed on behalf of Julien Ridoux and Darryl Veitch from the University of
Melbourne, Australia, as part of the FreeBSD Foundation funded "Feed-Forward
Clock Synchronization Algorithms" project.
For more information, see http://www.synclab.org/radclock/
In collaboration with: Julien Ridoux (jridoux at unimelb edu au)
pluknet [Fri, 30 Dec 2011 06:24:59 +0000 (06:24 +0000)]
Unset the environment variables associated with individual menu items
before invoking the kernel.
Quoting submitter:
The issue is with the new boot loader menu. It adds many loader variables
including ones that contain ANSI color escapes.
Obviously, these ANSI codes don't play well with serial consoles when
kenv(1) is executed without arguments (reports vary as to what happens,
but it's never pretty).
The net-effect is that kenv(1) no longer reports menu-related variables.
In essence, kenv(1) output should now appear the same as on RELENG_8
(which lacks the new boot loader and didn't use any such variables).
Thus, restoring serial console glory.
dim [Fri, 30 Dec 2011 02:58:37 +0000 (02:58 +0000)]
Reapply r228785 now it has been tested by Adrian. Also add comments
with the old AR_SCR_SLE_XXX values, with a short explanation why they
were changed.
dim [Fri, 30 Dec 2011 01:54:45 +0000 (01:54 +0000)]
For several files in sys/dev/drm, disable -Wunused-value when building
with clang. There are several macros in these files that return values,
and in some cases nothing is done with them, but it is completely
harmless. For some other files, also disable -Wconstant-conversion,
since that triggers a false positive with the DMA_BIT_MASK() macro.
rwatson [Thu, 29 Dec 2011 22:48:36 +0000 (22:48 +0000)]
Add "options CAPABILITY_MODE" and "options CAPABILITIES" to GENERIC kernel
configurations for various architectures in FreeBSD 10.x. This allows
basic Capsicum functionality to be used in the default FreeBSD
configuration on non-embedded architectures; process descriptors are not
yet enabled by default.
dim [Thu, 29 Dec 2011 21:17:35 +0000 (21:17 +0000)]
For sys/dev/ce/tau32-ddk.c, disable the following warning when building
with clang:
sys/dev/ce/tau32-ddk.c:1228:37: warning: implicit truncation from 'int' to bitfield changes value from 65532 to 8188 [-Wconstant-conversion]
Since this file is obfuscated C, we can never determine (in a sane way,
at least :) if this points to a real problem or not. The driver has
been in the tree for more than five years, so it most likely isn't.
jhb [Thu, 29 Dec 2011 20:41:16 +0000 (20:41 +0000)]
Defer the work of freeing IPv4 multicast options from a socket to an
asychronous task. This avoids tearing down multicast state including
sending IGMP leave messages and reprogramming MAC filters while holding
the per-protocol global pcbinfo lock that is used in the receive path of
packet processing.
yongari [Thu, 29 Dec 2011 18:40:58 +0000 (18:40 +0000)]
Update if_obytes and if_omcast after successful transmit.
While I'm here update if_oerrors if parent interface of vlan is not
up and running. Previously it updated collision counter and it was
confusing to interprete it.
PR: kern/163478
Reviewed by: glebius, jhb
Tested by: Joe Holden < lists <> rewt dot org dot uk >
jhb [Thu, 29 Dec 2011 16:23:14 +0000 (16:23 +0000)]
Further relax the strictness of enforcing allocations to only come from
decoded ranges. Pass any request for a specific range that fails because
it is not in a decoded range for an ACPI Host-PCI bridge up to the parent
to see if it can still be allocated. This is based on the assumption that
many BIOSes are inconsistent/broken and that settings programmed into BARs
or resources assigned to other built-in components are more trustworthy than
the list of decoded resource ranges in _CRS. This effectively limits the
decoded ranges to only being used for "wildcard" ranges when allocating
fresh resources for a BAR, etc. At some point I would like to only be
this permissive during an early scan of firmware-assigned resources during
boot and to be strict about all later allocations, but that isn't viable
currently.
jhb [Thu, 29 Dec 2011 16:17:16 +0000 (16:17 +0000)]
Cap the priority calculated from the current thread's running tick count
at SCHED_PRI_RANGE to prevent overflows in the priority value. This can
happen due to irregularities with clock interrupts under certain
virtualization environments.
ed [Thu, 29 Dec 2011 14:41:17 +0000 (14:41 +0000)]
Don't define static_assert for C++.
Even though _Static_assert() is pretty robust for C code, it cannot work
correctly with C++ code. This is due to the fact that C++ template
parameters may contain commas that are not enclosed in parentheses. For
example:
static_assert(foo<int, int>::bar == baz, "...");
This causes _Static_assert to be called with an excessive number of
parameters. If you want to use static_assert in C++, just use a C++11
compiler.
adrian [Thu, 29 Dec 2011 05:51:48 +0000 (05:51 +0000)]
Break out the AR71XX config file into _BASE and board specific
bits.
The ROUERSTATION and RSPRO variants contain:
* the board specific bits (eg the RTC for RSPRO, later on it'll
include the GPIO/LED definitions);
* the boot specific bits (eg, on-board flash, usb flash, etc).
For now the AR71XX_BASE file contains the common board config,
drivers and net80211/ath wireless drivers.
I'll follow this up with config files for the other boards I
have (eg the Ubiquiti LSSR71, as well as some Mikrotik boards
that use the AR71XX and atheros reference boards) which will
be quite easy to do now.
jilles [Wed, 28 Dec 2011 23:40:46 +0000 (23:40 +0000)]
sh: Use dirent.d_type in pathname generation.
This improves performance for globs where a slash or another component
follows a component with metacharacters by eliminating unnecessary attempts
to open directories that are not.
mav [Wed, 28 Dec 2011 22:49:28 +0000 (22:49 +0000)]
Set maximum I/O size for mps(4) to MAXPHYS. Looking into the code, I see
no reason why it should be limited to 64K of DFLTPHYS. DMA data tag is any
way set to allow MAXPHYS, S/G lists (chain elements) are sufficient and
overflows are also handled. On my tests even 1MB I/Os are working fine.
alc [Wed, 28 Dec 2011 19:59:54 +0000 (19:59 +0000)]
Fix a bug in the Xen pmap's implementation of pmap_extract_and_hold():
If the page lock acquisition is retried, then the underlying thread is
not unpinned.
gonzo [Wed, 28 Dec 2011 05:57:03 +0000 (05:57 +0000)]
- Add generic GPIO driver for Cavium Octeon. At the moment pin definition is
hardcoded but will be changed later with more flexible way to define them.
delphij [Wed, 28 Dec 2011 05:35:33 +0000 (05:35 +0000)]
In POSIX.1-2008:
P_tmpdir [OB XSI] Default directory prefix for tempnam().
This macro is used in a lot of places in legacy applications,
and is why we see a lot of programs written for e.g. Linux
store volatile temporary files in /var/tmp and not /tmp.
alc [Tue, 27 Dec 2011 23:53:00 +0000 (23:53 +0000)]
Eliminate many of the unnecessary differences between the native and
paravirtualized pmap implementations for i386. This includes some
style fixes to the native pmap and several bug fixes that were not
previously applied to the paravirtualized pmap.
ed [Tue, 27 Dec 2011 22:13:51 +0000 (22:13 +0000)]
Add locally implemented atomic intrinsics to libcompiler_rt.
The built-in atomic operations are not implemented in our version of GCC
4.2 for the ARM and MIPS architectures. Instead of emitting locked
instructions, they generate calls to functions that can be implemented
in the C runtime.
Only implement the atomic operations that are used by <stdatomic.h> for
datatype sizes that are supported by atomic(9). This means that on these
architectures, we can only use atomic operations on 32-bits and 64-bits
variables, which is typically sufficient.
This makes <stdatomic.h> work on all architectures except MIPS, since
MIPS and SPARC64 still use libgcc. Converting these architectures to
libcompiler_rt is on my todo list.
delphij [Tue, 27 Dec 2011 20:03:57 +0000 (20:03 +0000)]
- Fail when the utility is not invoked as rtprio nor idprio.
- use warnx() to tell the user whether a process is running in normal,
idle or realtime priority. with the old code it would have been possible
for another process to send data to stdout between
printf("%s: ", p);
and
printf("* priority\n");
and thus break the formatting.
- 'rtprio 10 -0' triggeres non-intuitive behavior. It would first set the
priority of itself to 10 *and* would then try to execute '-0'. Of course,
setting the priority of [id|rt]prio itself doesn't make a lot of sense,
but it is intuitive compared to the previous behavior.
- 'rtprio -t --1' will actually pass over the '-1' to rtprio(). Now
invoking rtprio like this will catch the wrong usage before passing
over the invalid argument to rtprio().
- Garrett Cooper suggested to add further diagnostics where the failure
occures, if execvp fails.
pluknet [Tue, 27 Dec 2011 15:59:51 +0000 (15:59 +0000)]
Clean up from the 4.x era.
In an example of boot command:
- rename wd(4) IDE disk drives name to ad(4) for the time being.
- update the used kernel path "/kernel" to the current default.
[It still worked occasionally by looking into the /boot/kernel directory,
so the resulting path was "/boot//kernel/kernel", with two slashes.]
projects / FreeBSD / FreeBSD.git / log