avg [Thu, 23 Mar 2017 11:59:17 +0000 (11:59 +0000)]
aacraid: rework r315083 for a clean build with and without AACRAID_DEBUG
r315083 essentially reverted r263954 which was made for a good reason,
but didn't take into account AACRAID_DEBUG.
Now both types of build should be clean.
mav [Thu, 23 Mar 2017 10:50:45 +0000 (10:50 +0000)]
Remove "UNMAPPED" messages printed on da periph attach.
I think this message is not very useful for end user. Also its formatting
does not match other messages printed at that time. Those who really need
this information can always find it in `camcontrol negotiate daX -v`.
avg [Thu, 23 Mar 2017 08:59:17 +0000 (08:59 +0000)]
zfs: add zio_buf_alloc_nowait and use it in vdev_queue_aggregate
This way we can avoid blocking the whole queue in the low memory
situations. It's better to sacrifice some I/O performance by not doing
the aggregation than to add an indefinite wait for more memory.
avg [Thu, 23 Mar 2017 08:57:04 +0000 (08:57 +0000)]
move thread switch tracing from mi_switch to sched_switch
This is done so that the thread state changes during the switch
are not confused with the thread state changes reported when the thread
spins on a lock.
Here is an example, three consecutive entries for the same thread (from top to
bottom):
KTRGRAPH group:"thread", id:"zio_write_intr_3 tid 100260", state:"sleep", attributes: prio:84, wmesg:"-", lockname:"(null)"
KTRGRAPH group:"thread", id:"zio_write_intr_3 tid 100260", state:"spinning", attributes: lockname:"sched lock 1"
KTRGRAPH group:"thread", id:"zio_write_intr_3 tid 100260", state:"running", attributes: none
The above trace could leave an impression that the final state of
the thread was "running".
After this change the sleep state will be reported after the "spinning"
and "running" states reported for the sched lock.
des [Thu, 23 Mar 2017 08:34:30 +0000 (08:34 +0000)]
The original author abused Nd (one-line description, used by makewhatis)
for its side effect of producing an en-dash. This broke whatis with
newer versions of mdocml. Use \(en instead.
mmel [Thu, 23 Mar 2017 08:16:53 +0000 (08:16 +0000)]
Restore original (pre r315760) naming for Tegra SDHCI device.
Newbus handles multiple equally named device classes without problems,
so there is no reason to use slightly cryptic "<foo>_shdci" for them.
In contrast, the driver module name must be unique, so "<foo>_shdci"
is the right name for it.
ngie [Thu, 23 Mar 2017 07:36:38 +0000 (07:36 +0000)]
Try polishing up iflib manpages a bit (basically all the low hanging fruit)
igor:
- Fix typos.
- Delete trailing whitespace.
manlint:
- Use .Fo/.Fc/.Fa when describing functions.
- Use .Xr.
- Fill in SEE ALSO section.
- Fix .Dt use: the section was specified incorrectly and the name
had a lowercase character.
- Continue new sentences on new lines.
Miscellaneous:
- Remove unnecessary quotes around "SEE ALSO" section headers.
- Sprinkle .Dv use in spots with constants.
Reported by: igor, make manlint
Sponsored by: Dell EMC Isilon
ngie [Thu, 23 Mar 2017 05:26:44 +0000 (05:26 +0000)]
intro(3): fix markup
- Use `Em` with `.It` macro when referring to other libraries, instead of
`Xr`.
- Use `.Em` instead of `.Xr` when referring to libraries.
- Remove commented out lines.
adrian [Thu, 23 Mar 2017 04:43:04 +0000 (04:43 +0000)]
[iwm] Remove a couple of unneeded IWM_UCODE_TLV_FLAGS_* flags.
* All the supported firmwares have these flags set.
* This removes the following flags:
IWM_UCODE_TLV_FLAGS_PM_CMD_SUPPORT,
IWM_UCODE_TLV_FLAGS_NEWBT_COEX,
IWM_UCODE_TLV_FLAGS_BF_UPDATED,
IWM_UCODE_TLV_FLAGS_D3_CONTINUITY_API,
IWM_UCODE_TLV_FLAGS_STA_KEY_CMD,
IWM_UCODE_TLV_FLAGS_DEVICE_PS_CMD,
IWM_UCODE_TLV_FLAGS_SCHED_SCAN,
IWM_UCODE_TLV_FLAGS_RX_ENERGY_API,
IWM_UCODE_TLV_FLAGS_TIME_EVENT_API_V2
* Also remove definitions and code for dealing with the v1 time-event api.
When ported from Tiano core, I commented this out with an ifdef. That
was in error because we're supposed to fallback to a filepath when
nothing else patches. Instead, restore the original code, but fix
DevPathFromTextFilePath to cope with the conversion to narrow
strings. Also, fix the off-by-one error in the size of the memory it
allocates.
The off by one error is documented in Tiano core bug
https://bugzilla.tianocore.org/show_bug.cgi?id=441
imp [Thu, 23 Mar 2017 02:30:52 +0000 (02:30 +0000)]
Define StrCmp in a funky was to be bug-compatible with EDK2 code.
Paper over a coverity issue:
*** CID 1372592: API usage errors (BAD_COMPARE)
/lib/libefivar/efivar-dp-parse.c: 2723 in DevPathFromTextiSCSI()
Truncating the result of "strcmp" to "unsigned short" may cause it
to be misinterpreted as 0. Note that "strcmp" may return an integer
besides -1, 0, or 1.
We do this by making StrCmp return either 0 or 1 for equal or
not-equal. There's a bug in the DevPathFromTextiSCSI cast of the
return value and this workaround will fix it without breaking other
users of StrCmp (all of which test for == 0).
https://bugzilla.tianocore.org/show_bug.cgi?id=440 has been filed
upstream to log this issue.
kib [Wed, 22 Mar 2017 22:23:01 +0000 (22:23 +0000)]
Add a flag BI_BRAND_ONLY_STATIC to specify that the brand only
matches static binaries.
Interpretation of the 'static' there is that the binary must not
specify an interpreter. In particular, shared objects are matched by
the brand if BI_CAN_EXEC_DYN is also set.
This improves precision of the brand matching, which should eliminate
surprises due to brand ordering.
Revert r315701.
Discussed with and tested by: ed (previous version)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
kp [Wed, 22 Mar 2017 21:18:18 +0000 (21:18 +0000)]
pf: Fix possible shutdown race
Prevent possible races in the pf_unload() / pf_purge_thread() shutdown
code. Lock the pf_purge_thread() with the new pf_end_lock to prevent
these races.
Use a shared/exclusive lock, as we need to also acquire another sx lock
(VNET_LIST_RLOCK). It's fine for both pf_purge_thread() and pf_unload()
to sleep,
Pointed out by: eri, glebius, jhb
Differential Revision: https://reviews.freebsd.org/D10026
ed [Wed, 22 Mar 2017 19:20:39 +0000 (19:20 +0000)]
Make file descriptor passing for CloudABI's recvmsg() work.
Similar to the change for sendmsg(), create a pointer size independent
implementation of recvmsg() and let cloudabi32 and cloudabi64 call into
it. In case userspace requests one or more file descriptors, call
kern_recvit() in such a way that we get the control message headers in
an mbuf. Iterate over all of the headers and copy the file descriptors
to userspace.
imp [Wed, 22 Mar 2017 19:18:47 +0000 (19:18 +0000)]
Implement moving SD.
From the paper "Incremental calculation of weighted mean and variance"
by Tony Finch Februrary 2009, retrieved from
http://people.ds.cam.ac.uk/fanf2/hermes/doc/antiforgery/stats.pdf
converted to use shifting.
imp [Wed, 22 Mar 2017 19:00:41 +0000 (19:00 +0000)]
Impelemnt ttys onifexists in init.
Implement a new init(8) option in /etc/ttys. If this option is present
on the entry in /etc/ttys, the entry will be active if and only if it
exists. If the name starts with a '/', it will be considered an
absolute path. If not, it will be a path relative to /dev.
This allows one to turn off video console getty that aren't present
(while running a getty on them even when they aren't the system
console). Likewise with serial ports.
It differs from onifconsole in only requiring the device exist rather
than it be listed as one of the system consoles.
cem [Wed, 22 Mar 2017 17:37:47 +0000 (17:37 +0000)]
scandir: Fix NULL dereference, uninitialized value use in error case
If opendir succeeds but malloc fails, numitems was used uninitialized in
error handling under the 'fail' label. If it happened to have a non-zero
value, the NULL 'names' was dereferenced.
grehan [Wed, 22 Mar 2017 16:53:03 +0000 (16:53 +0000)]
This fixes a typo in bhyve's USB mouse emulation.
There is no behavioral difference, as it's just swapping
out the name of two identically-valued constants.
Submitted by: Vicki Pfau (vi AT endrift.com)
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D9597
des [Wed, 22 Mar 2017 13:16:04 +0000 (13:16 +0000)]
Add options to capture stdout and / or stderr and pass the output on
to the user. There is currently no buffering, so the result may be
somewhat unpredictable if the conversation function adds a newline,
like openpam_ttyconv() does.
Clean up and simplify the environment handling code, which triggered
an inexplicable bug on some systems.
ed [Wed, 22 Mar 2017 07:05:27 +0000 (07:05 +0000)]
Set the interpreter path to /nonexistent.
CloudABI executables are statically linked and don't have an
interpreter. Setting the interpreter path to NULL used to work
previously, but r314851 introduced code that checks the string
unconditionally. Running CloudABI executables now causes a null pointer
dereference.
Looking at the rest of imgact_elf.c, it seems various other codepaths
already leaned on the fact that the interpreter path is set. Let's just
go ahead and pick an obviously incorrect interpreter path to appease
imgact_elf.c.
ed [Wed, 22 Mar 2017 06:43:10 +0000 (06:43 +0000)]
Make file descriptor passing work for CloudABI's sendmsg().
Reduce the potential amount of code duplication between cloudabi32 and
cloudabi64 by creating a cloudabi_sock_recv() utility function. The
cloudabi32 and cloudabi64 modules will then only contain code to convert
the iovecs to the native pointer size.
In cloudabi_sock_recv(), we can now construct an SCM_RIGHTS cmsghdr in
an mbuf and pass that on to kern_sendit().
ngie [Wed, 22 Mar 2017 05:27:20 +0000 (05:27 +0000)]
Print out name of non-dynamic sysctl in sysctl_remove_oid_locked
This will provide a slightly better smoking gun than just stating
"can't remove non-dynamic nodes!" when calling sysctl_ctx_free(9)
and sysctl_remove_{name,oid}(9) with a non-dynamic (likely
static) sysctl.
ngie [Wed, 22 Mar 2017 02:42:00 +0000 (02:42 +0000)]
libkvm: fix warning issues post-r291406
- Fix -Wunused warnings with *_native detection handlers by marking `kd`
__unused, except with arm/mips, where a slightly more complicated scheme
is required to handle the native case vs the non-native case.
- Fix -Wmissing-variable-declarations warnings by marking struct kvm_arch
objects static.
vangyzen [Wed, 22 Mar 2017 00:50:36 +0000 (00:50 +0000)]
clock_gettime.2: add some clock IDs
Add the CLOCK_PROCESS_CPUTIME_ID and CLOCK_THREAD_CPUTIME_ID clock_id
values to the clock_gettime(2) man page. Reformat the excessively
long paragraph (sentence!) into a tag list.
Reported by: jilles in https://reviews.freebsd.org/D10020
MFC after: 3 days
Sponsored by: Dell EMC
cem [Tue, 21 Mar 2017 22:41:37 +0000 (22:41 +0000)]
kern_fail: Allow sleeping for more than 2147483/hz seconds
Because of integer types, the timeout calculation result was limited to
INT_MAX / (1000 * hz) seconds. For systems with hz=10000, this is only 215
seconds. Perform the calculation with 64-bit math to allow sleeping for the
full INT_MAX / hz interval (215000 seconds on such hz=10000 systems).
Submitted by: Scott Ferris <sferris at isilon.com>
Sponsored by: Dell EMC Isilon
dim [Tue, 21 Mar 2017 21:07:37 +0000 (21:07 +0000)]
Gcc has incompatible internal declarations for __divtc3 and __multc3 as
defined in compiler-rt, but it has no option to silence its warning, so
make gcc warnings for libcompiler_rt non-fatal.
ngie [Tue, 21 Mar 2017 19:10:07 +0000 (19:10 +0000)]
Document sbuf_hexdump(9) in just sbuf(9)
- Remove duplicate references to sbuf_hexdump(9) from hexdump(3).
sbuf_hexdump(9) already pointed back to hexdump(3) for implementation
details.
- Refer to sbuf_hexdump(9) instead of sbuf(9) for completeness
ngie [Tue, 21 Mar 2017 19:02:17 +0000 (19:02 +0000)]
kvm_geterr: handle `kd` == NULL in a deterministic/graceful manner
Return a NUL string instead of just working by accident with kvm_geterr(3)
when MALLOC_PRODUCTION is disabled (I didn't confirm the MALLOC_PRODUCTION
being enabled path).
Document the new explicit return behavior for kvm_geterr(3), as well
as the previous implicit behavior, i.e., the buffer attached to
returned via kvm_geterr(3) would be empty if a previous error hadn't been
stored in `kd`.
emaste [Tue, 21 Mar 2017 18:02:14 +0000 (18:02 +0000)]
tighten buffer bounds in imgact_binmisc_populate_interp
We must ensure there's space for the terminating null in the temporary
buffer in imgact_binmisc_populate_interp().
Note that there's no buffer overflow here because xbe->xbe_interpreter's
length and null termination is checked in imgact_binmisc_add_entry()
before imgact_binmisc_populate_interp() is called. However, the latter
should correctly enforce its own bounds.
Reviewed by: sbruno
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D10042