Matthew Smith [Mon, 16 Jul 2018 16:36:04 +0000 (11:36 -0500)]
ixgbe: wait longer for link after fiber MAC setup
After setting up the link on a fiber port, the maximum wait time for
the link to come up is 500 ms in ixgbe_setup_mac_link_multispeed_fiber().
On an x550 SFP+ port, this is often not sufficiently long for the link
to come up. This can result in never being able to retrieve accurate
link status for the port using rte_eth_link_get_nowait().
Increase the maximum wait time in ixgbe_setup_mac_link_multispeed_fiber()
to 1 s.
Guinan Sun [Thu, 9 Jul 2020 08:00:41 +0000 (08:00 +0000)]
ixgbe: improve log about autoneg being disabled
On ESXi OS, when user disables auto negotiation, the following log
appears: "(unsupported) Flow control autoneg is disabled".
It is true that auto negotiation is disabled but it is
not necessarily true that it is not supported.
Guinan Sun [Thu, 9 Jul 2020 08:00:31 +0000 (08:00 +0000)]
ixgbe: fix infinite recursion on PCIe link down
In some corner cases the functions ixgbe_clear_rar_generic and
ixgbe_clear_vmdq_generic may call one another leading to infinite
recursion.
When ixgbe_clear_vmdq_generic is called with IXGBE_CLEAR_VMDQ_ALL
flag, it's going to clear MPSAR registers, and proceed to call
ixgbe_clear_rar_generic, which in turn will clear the RAR registers,
and recursively call back ixgbe_clear_vmdq_generic. Normally, the
latter would detect that MPSAR registers have already been cleared
and terminate the recursion.
However, when PCIe link is down, and before the driver has had the
opportunity to shut itself down, all register reads return 0xFFFFFFFF,
and all register writes fail silently. In such case, because
ixgbe_clear_vmdq_generic blindly assumes that clearing MPSAR registers
succeeded, it's going to always call ixgbe_clear_rar_generic, which
in turn will always call back ixgbe_clear_vmdq_generic, creating
infinite recursion.
This patch re-reads MPSAR register values after they had been cleared.
In case of PCIe link failure, the values read will be non-zero, which
will terminate the recursion. On the other hand, under normal
circumstances the value read from MPSAR registers is going to be equal
to the value previously written, so this patch is expected not to cause
any regressions.
Simon Ellmann [Thu, 17 Dec 2020 17:14:52 +0000 (18:14 +0100)]
ixgbe: clear all queues on VF reset
ixgbe devices support up to 8 Rx and Tx queues per virtual function.
Currently, the registers of only seven queues are set to default when
resetting a VF.
kqueue: drain kqueue taskqueue if syscall tickled it
Otherwise return from the syscall and next syscall, which could be
kevent(2) on the kqueue that should be notified, races with the kqueue
taskqueue thread, and potentially misses the wakeup. This is reliably
visible when kevent(2) only peeks into events using zeroed timeout.
PR: 258310
Reported by: arichardson, Jan Kokemüller <jan.kokemueller@gmail.com>
Reviewed by: arichardson, markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D31858
lltable: do not require prefix lookup when checking lle allocation rules.
With the new FIB_ALGO infrastructure, nearly all subsystems use
fib[46]_lookup() functions, which provides lockless lookups.
A number of places remains that uses old-style lookup functions, that
still requires RIB read lock to return the result. One of such places
is arp processing code.
FIB_ALGO implementation makes some tradeoffs, resulting in (relatively)
prolonged periods of holding RIB_WLOCK. If the lock is held and datapath
competes for it, the RX ring may get blocked, ending in traffic delays and losses.
As currently arp processing is performed directly in the interrupt handler,
handling ARP replies triggers the problem descibed above when the amount of
ARP replies is high.
To be more specific, prior to creating new ARP entry, routing lookup for the entry
address in interface fib is executed. The following conditions are the verified:
1. If lookup returns an empty result, or the resulting prefix is non-directly-reachable,
failure is returned. The only exception are host routes w/ gateway==address.
2. If the routing lookup returns different interface and non-host route,
we want to support the use case of having multiple interfaces with the same prefix.
In fact, the current code just checks if the returned prefix covers target address
(always true) and effectively allow allocating ARP entries for any directly-reachable prefix,
regardless of its interface.
Change the code to perform the following:
1) use fib4_lookup() to get the nexthop, instead of requesting exact prefix.
2) Rewrite first condition check using nexthop flags (1:1 match)
3) Rewrite second condition to check for interface addresses matching target address on
the input interface.
compiler-rt: add aarch64 init function for LSE atomics
As reported by Ronald, adding the out-of-line LSE atomics helpers for
aarch64 to compiler-rt was not sufficient to link programs using these,
as they also require a __aarch64_have_lse_atomics global. This is
initialized in compiler-rt's lib/builtins/cpu_model.c, roughly similar
to the x86 CPU model and feature detection in that file.
Since upstream does not yet have a FreeBSD specific implementation for
getting the required information, add a simple one that should work for
now, while I try to get it sorted with the LLVM people.
Mark Murray [Mon, 6 Sep 2021 17:26:39 +0000 (18:26 +0100)]
Fix powf().
Summary:
From Steve Kargl:
Paul Zimmermann has identified a bug in Openlibm's powf(),
which is identical to FreeBSD's libm. Both derived from
fdlibm. https://github.com/JuliaMath/openlibm/issues/212.
Consider
% cat h.c
int
main(void)
{
float x, y, z;
x = 0x1.ffffecp-1F;
y = -0x1.000002p+27F;
z = 0x1.557a86p115F;
printf("%e %e %e <-- should be %e\n", x, y, powf(x,y), z);
return 0;
}
% cc -o h -fno-builtin h.c -lm && ./h
9.999994e-01 -1.342177e+08 inf <-- should be 5.540807e+34
Robert Wing [Mon, 6 Sep 2021 15:42:46 +0000 (07:42 -0800)]
git-arc: allow word splitting in build_commit_list()
git-rev-list expects commits to be listed separately, allow word
splitting and disable shellcheck SC2086 when using git-rev-list
to build the commit list.
Fixes: 4fd0c6ab1a9e ("Fix most shellcheck warnings in git-arc.sh")
Reviewed by: markj
Differential Revision: https://reviews.freebsd.org/D31838
The purpose of this command is to "refresh" the source reference
files generated with GNU libiconv, located in tools/test/iconv/ref/.
Previously it would generate copies somewhere in OBJDIR, which
we don't use.
Reviewed By: allanjude
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D31820
Alex Richardson [Mon, 6 Sep 2021 09:24:33 +0000 (10:24 +0100)]
Enable MK_LLVM_BINUTILS if MK_ASAN is requested
ASan will not be able to provide backtraces with symbol names with
elftoolchain's addr2line. To fix this turn MK_LLVM_BINUTILS on by
default when ASan instrumentation is requested.
Alex Richardson [Mon, 6 Sep 2021 08:49:49 +0000 (09:49 +0100)]
Add WITH_LLVM_BINUTILS to install LLVM binutils instead of Elftoolchain
When WITH_LLVM_BINUTILS is set, we will install the LLVM binutils as
ar/ranlib/nm/objcopy/etc. instead of the elftoolchain ones.
Having the LLVM binutils instead of the elftoolchain ones allows us to use
features such as LTO that depend on binutils that understand LLVM IR.
Another benefit will be an improved user-experience when compiling with
AddressSanitizer, since ASAN does not symbolize backtraces correctly if
addr2line is elftoolchain addr2line instead of llvm-symbolizer.
See https://lists.freebsd.org/archives/freebsd-toolchain/2021-July/000062.html
for more details.
This is currently off by default but will be turned on by default at some
point in the near future.
Alex Richardson [Mon, 6 Sep 2021 08:31:58 +0000 (09:31 +0100)]
Don't build and install {llvm,clang,lldb}-tblgen for the target
The tablegen binaries are only needed to build software that uses
LLVM's infrastructure for command line options,
disassembler tables, etc. They are not user-facing binaries and
should therefore not be installed by default.
Colin Percival [Sun, 5 Sep 2021 19:45:29 +0000 (12:45 -0700)]
Add run_interrupt_driven_config_hooks to TSLOG
The 'intr_config_hooks' SYSINIT is now taking a nontrivial amount of
time in my profiling; run_interrupt_driven_config_hooks is responsible
for most of it, so this adds useful information to the resulting
flamecharts.
Alexander Motin [Sat, 4 Sep 2021 22:22:53 +0000 (18:22 -0400)]
sound(4): Remove pointless Giant from bus_dma_tag_create().
None of the drivers really implement asynchronous buffer loading, so
they don't need lock there. The only question is which of them have
BUS_DMA_NOWAIT flag there already, and to which it should be added.
Brandon Bergren [Mon, 3 May 2021 02:12:18 +0000 (21:12 -0500)]
[PowerPC] Fix outdated FP regs on fork(2) and friends
Summary:
Failure to update the FP / vector state was causing daemon(3) to violate C ABI by failing to preserve nonvolatile registers.
This was causing a weird issue where moused was not working on PowerBook G4s when daemonizing, but was working fine when running it foreground.
Force saving off the same state that cpu_switch() does in cases where we are about to copy a thread.
MFC after: 1 week
Sponsored by: Tag1 Consulting, Inc.
Test Plan:
```
/*
* Test for ABI violation due to side effects of daemon(3).
*
* NOTE: Compile with -O2 to see the effect.
*/
/* Allow compiling for Linux too. */
static double test = 1234.56f;
/*
* This contrivance coerces clang to not bounce the double
* off of memory again in main.
*/
void __attribute__((noinline))
print_double(int j1, int j2, double d)
{
printf("%f\n", d);
}
int
main(int argc, char *argv[])
{
print_double(0, 0, test);
if (daemon(0, 1)) {
}
/* Compiler assumes nonvolatile regs are intact... */
print_double(0, 0, test);
return(0);
}
```
net80211: add func/line information to IEEE80211_DISCARD* macros
While debugging is very good in net80211, some log messages are
repeated in multiple places 1:1. In order to distinguish where the
discard happened and to speed up analysis, add __func__:__LINE__
information to all these messages.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Alexander Motin [Sat, 4 Sep 2021 02:18:51 +0000 (22:18 -0400)]
Re-implement virtual console (constty).
Protect conscallout with tty lock instead of Giant. In addition to
Giant removal it also closes race on console unset.
Introduce additional lock to protect against concurrent console sets.
Remove consbuf free on console unset as unsafe, making impossible to
change buffer size after first allocation. Instead increase default
buffer size from 8KB to 64KB and processing rate from 5Hz to 10-15Hz
to make the output more smooth.
Ed Maste [Thu, 2 Sep 2021 20:43:59 +0000 (16:43 -0400)]
openssh: restore local change to gssapi include logic
/usr/include/gssapi.h claims that it is deprecated, and gssapi/gssapi.h
should be used instead. So, test HAVE_GSSAPI_GSSAPI_H first falling
back to HAVE_GSSAPI_H.
This will be submitted upstream.
Fixes: 6eac665c8126 ("openssh: diff reduction against...")
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D31810
Brooks Davis [Fri, 3 Sep 2021 18:30:23 +0000 (19:30 +0100)]
mprotect.2: Remove legacy BSD text
This text dates to the BSD 4.4 import and is misleading. The mprotect
syscall acts on page granularity and breaks up mappings as required to
do so.
Note that with the addition of non-transparent superpages (aka
largepages) the size of a page at a given address may vary. This
commit does not attempt to address the lack of documentation of this
feature.
llvm: Revert "[HardwareLoops] Change order of SCEV expression construction for InitLoopCount."
Reverts llvm commit 42eaf4fe0adef3344adfd9fbccd49f325cb549ef, pointed
from bisect as source of regression that causes liblzma to compress/
uncompress incorrectly. It's know to affect powerpc64 BE only.
The patch unbreaks FreeBSD powerpc64 installation media, since
bsdinstall can't uncompress the *.txz produced by FreeBSD CI. It's
probably miscompiling other software bas well.
Reviewed by: dim
MFC after: 2 days
Sponsored by: Instituto de Pesquisas Eldorado (eldorado.org.br)
Differential Revision: https://reviews.freebsd.org/D31804
RSN Preauthentication allows a station autnetnicate to an AP that
it is not associated with yet while associated with a different AP.
This allows athentication to multiple APs simulteneously.
pf: ensure states passed to pf_free_state() are always unlinked
In pf_create_state() we can end up deleting the state immediately. This
can happen if we fail to map the relevant addresses or fail
normalization or fail to insert it into the state table.
If that happens we delete the state again with pf_free_state(). However,
this asserts that the state must be unlinked.
It's correct to simply set the state to PFTM_UNLINKED because we've not
yet linked it.
Alexander Motin [Fri, 3 Sep 2021 01:16:46 +0000 (21:16 -0400)]
callout(9): Allow spin locks use with callout_init_mtx().
Implement lock_spin()/unlock_spin() lock class methods, moving the
assertion to _sleep() instead. Change assertions in callout(9) to
allow spin locks for both regular and C_DIRECT_EXEC cases. In case of
C_DIRECT_EXEC callouts spin locks are the only locks allowed actually.
As the first use case allow taskqueue_enqueue_timeout() use on fast
task queues. It actually becomes more efficient due to avoided extra
context switches in callout(9) thanks to C_DIRECT_EXEC.
Alexander Motin [Fri, 3 Sep 2021 00:58:02 +0000 (20:58 -0400)]
vmd(4): Major driver refactoring
- Re-implement pcib interface to use standard pci bus driver on top of
vmd(4) instead of custom one.
- Re-implement memory/bus resource allocation to properly handle even
complicated configurations.
- Re-implement interrupt handling to evenly distribute children's MSI/
MSI-X interrupts between available vmd(4) MSI-X vectors and setup them
to be handled by standard OS mechanisms with minimal overhead, except
sharing when unavoidable.
Successfully tested on Dell XPS 13 laptop with Core i7-1185G7 CPU (VMD
device ID 0x9a0b) and single NVMe SSD, dual-booting with Windows 10.
Successfully tested on Supermicro X11DPI-NT motherboard with Xeon(R)
Gold 6242R CPUs (VMD device ID 0x201d), simultaneously handling NVMe
SSD on one PCIe port and PLX bridge with 3 NVMe and 1 AHCI SSDs on
another. Handles SSD hot-plug (except Optane 905p for some reason,
which are not detected until manual bus rescan) and enabled IOMMU
(directly connected SSDs work, but ones connected to the PLX fail
without errors from IOMMU).
Alexander Motin [Thu, 2 Sep 2021 22:11:58 +0000 (18:11 -0400)]
bnxt(4): Fix bugs in WOL support.
Before this change driver reported IFCAP_WOL_MAGIC enabled, but not
supported. It caused errors on some SIOCSIFCAP calls. Instead
report the support if hardware supports WOL, and enabled status if
it has such filter installed on boot.
Also bnxt_wol_config() should check WOL status in if_getcapenable(),
not in if_getcapabilities() to get current one.
Toomas Soome [Thu, 2 Sep 2021 21:17:32 +0000 (00:17 +0300)]
loader.efi: fix console output after BS off
When Boot Services (BS) are switched off, we can not use BS
functions any more. Since drawn console does implement our own
Blt(), we can use it to draw the console.
However, SimpleTextOutput protocol based console output must be
blocked.
Tested by inserting printf() after ExitBootServices() call.
hmt(4): Add support for touchpads with no "button type" or
"maximum number of contacts" usages.
Assume touchpad to be a clickpad if it has only internal button.
Set number of contacts to 5 for touchpads and to 10 for touchscreens.
Check for fetched report length to avoid reading of stalled data.
Fixes Dell Precision 7550 laptop.
hmt(4): Add support for serial packet reporting mode
In Serial mode, each packet contains information that describes a
single physical contact point. Multiple contacts are streamed
serially. In this mode, devices report all contact information in a
series of packets. The device sends a separate packet for each
concurrent contact.
Serial packet reporting mode is used by post-2014 eGalax touchscreens.
Tested by: Mark Kane <mark_AT_kane_DOT_mn>
MFC after: 2 weeks
cluster_write(): do not access buffer after it is released
The issue was reported by
Alexander Lochmann <alexander.lochmann@tu-dortmund.de>,
who found the problem by performing lock analysis using LockDoc,
see https://doi.org/10.1145/3302424.3303948.
Reviewed by: mckusick
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D31780
Bryan Drewery [Wed, 25 Aug 2021 18:37:11 +0000 (11:37 -0700)]
getdelim(3): Fix losing data on [EAGAIN]
Currently when an [EAGAIN] is encountered we return a partial result
that does not contain the delimeter. On the next (successful) read we
were returning the next part of the line without the preceding string
from the first failed call.
Fix this by using the same mechanism as ungetc(3) does. For the buffered
case we could simply set fp->_r and fp->_p back to their values before
sappend() is ran but for simplicity ungetc(3) is done in there as well.
Ed Maste [Thu, 2 Sep 2021 00:35:45 +0000 (20:35 -0400)]
openssh: regenerate config.h
Since config.h was last regenerated FreeBSD has added (a stub) libdl,
and has removed sys/dir.h. Regenerate config.h to avoid spurious
additional changes when OpenSSH is next updated.
There should be no issue if this change is MFC'd, but I don't plan to do
so. Although configure checks for libdl HAVE_LIBDL isn't even used, and
sys/dir.h was non-functional before being removed. The state of these
two config.h settings should make no difference in the built OpenSSH.
Ed Maste [Thu, 2 Sep 2021 00:23:40 +0000 (20:23 -0400)]
openssh: clarify krb5 use in freebsd-configure
freebsd-configure.sh runs configure twice, --with-kerberos5 and
--without-kerberos5, in order to build a config.h that defaults to
kerberos5 disabled, and a small config file that represents the
differences.
Rename config.h.orig to config.h.kerberos5 to clarify the intent of this
script.
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Michal Krawczyk [Thu, 12 Aug 2021 08:34:30 +0000 (10:34 +0200)]
ena: Update driver version to v2.4.1
Some of the changes in this release:
* Hardware RSS hash key reconfiguration and indirection table
reconfiguration support.
* Full kernel RSS support.
* Extra statistic counters.
* Netmap support for ENAv3.
* Locking assertions.
* Extra log messages.
* Reset handling fixes.
Artur Rojek [Thu, 12 Aug 2021 08:34:29 +0000 (10:34 +0200)]
ena: Implement full RSS reconfiguration
Bind RX/TX queues and MSI-X vectors to matching CPUs based on the RSS
bucket entries.
Introduce sysctls for the following RSS functionality:
- rss.indir_table: indirection table mapping
- rss.indir_table_size: indirection table size
- rss.key: RSS hash key (if Toeplitz used)
Said sysctls are only available when compiled without `option RSS`, as
kernel-side RSS support currently doesn't offer RSS reconfiguration.
Migrate the hash algorithm from CRC32 to Toeplitz and change the initial
hash value to 0x0 in order to match the standard Toeplitz implementation.
Provide helpers for hash key inversion required for HW operations.
Artur Rojek [Thu, 12 Aug 2021 08:34:28 +0000 (10:34 +0200)]
ena: Share ena_global_lock between driver instances
In order to use `ena_global_lock` in sysctl context, it must be kept
outside the driver instance's software context, as sysctls can be called
before attach and after detach, leading to lock use before sx_init and
after sx_destroy otherwise.
Solve this issue by turning `ena_global_lock` into a file scope
variable, shared between all instances of the driver and associated
sysctl context, and in turn initialized/destroyed in dedicated
SYSINIT/SYSUNINIT functions.
As a side effect, this change also fixes existing race in the reset
routine, when simultaneously accessing sysctl exposed properties.