kib [Sat, 12 Feb 2011 12:46:00 +0000 (12:46 +0000)]
Replace ERROR() macro with inline function. In-tree gcc cannot tolerate
the construct like printf("%\s", NULL) resulting from macroexpand of
ERROR(u, NULL), making it impossible to use LIBUFS_DEBUGGING.
With inline function, compiler cannot detect the NULL argument to
known function and does not try to convert it into puts().
mav [Sat, 12 Feb 2011 07:06:40 +0000 (07:06 +0000)]
Disable NCQ for multiport Marvell 88SX61XX SATA controllers. Simultaneous
active I/O to several disks (copying large file on ZFS) causes timeout after
just a few seconds of run. Single port 88SX6111 seems like not affected.
Skip reading transferred bytes count for these controllers. It works for
88SX6111, but 88SX6145 always returns zero there. Haven't tested others,
but better to be safe.
jmallett [Sat, 12 Feb 2011 02:41:33 +0000 (02:41 +0000)]
The Lanner MR-730 uses the first two MACs at its MAC base for the 10/100
management ports, and gigabit ports start at an offset of 2 from the MAC
base.
adrian [Sat, 12 Feb 2011 02:14:19 +0000 (02:14 +0000)]
The current code used the fields in ath_set11nratescenario() . Use them
correctly:
* pass in whether to allow the hardware to override the duration field
in the main data frame (durupdate_en) - PS_POLL frames in particular
don't have the duration bit overriden;
* there's no rts/cts duration here; that's done elsehwere
jmallett [Sat, 12 Feb 2011 02:08:24 +0000 (02:08 +0000)]
Allow the platform code to return a bitmask of running cores rather than just
a number of cores, this allows for a sparse set of CPUs. Implement support
for sparse core masks on Octeon.
XXX jeff@ suggests that all_cpus should include cores that are offline or
running other applications/OSes, so the platform API should be further
extended to allow us to set all_cpus to include all cores that are
physically-present as opposed to only those that are running FreeBSD.
kib [Fri, 11 Feb 2011 10:46:15 +0000 (10:46 +0000)]
For UIO_NOCOPY case of reading request on zfs vnode, which has vm object
attached, activate the page after the successful read, and free the page
if read was unsuccessfull.
Freshly allocated page is not on any queue yet, and not activating (or
deactivating) the page leaves it on no queue, excluding the page from
pagedaemon scans and making the memory disappeared until the vnode
reclaimed.
imp [Fri, 11 Feb 2011 06:35:53 +0000 (06:35 +0000)]
Generate MACHINE= and MACHINE_ARCH= lines based on the machine
directive. Once this is MFC'd, we can move these out of the template
files where they are (incosnsitently) defined.
imp [Fri, 11 Feb 2011 04:03:39 +0000 (04:03 +0000)]
Hmmm, specifying TARGET and TARGET_ARCH in the environment doesn't
seem to work when building xdev anymore (most likely my changes lately
moving the TARGET guessing stuff to Makefile from Makefile.inc1, but I
really don't grok why). Fix make xdev by putting them on the command
line. This will work either way while I try to figure it out.
jfv [Fri, 11 Feb 2011 01:00:26 +0000 (01:00 +0000)]
Add support for the new I350 family of 1G interfaces.
- this also includes virtualization support on these devices
Correct some vlan issues we were seeing in test, jumbo frames on vlans
did not work correctly, this was all due to confused logic around HW
filters, the new code should now work for all uses.
Important fix: when mbuf resources are depeleted, it was possible to
completely empty the RX ring, and then the RX engine would stall
forever. This is fixed by a flag being set whenever the refresh code
fails due to an mbuf shortage, also the local timer now makes sure
that all queues get an interrupt when it runs, the interrupt code
will then always call rxeof, and in that routine the first thing done
is now to check the refresh flag and call refresh_mbufs. This has been
verified to fix this type 'hang'. Similar code will follow in the other
drivers.
Finally, sync up shared code for the I350 support.
Thanks to everyone that has been reporting issues, and helping in the
debug/test process!!
imp [Thu, 10 Feb 2011 23:36:39 +0000 (23:36 +0000)]
Add 'generic' flash images. This is for projects producing generic
images that are of a certain size. The geometery is bogus, but that
doesn't matter since the new packet mode onviates the need to get the
geometry right.
imp [Thu, 10 Feb 2011 19:58:21 +0000 (19:58 +0000)]
You are now *REQUIRED* to pass both TARGET and TARGET_ARCH to any
invocations of Makefile.inc1 (since that's supposed to be an internal
interface for world and related targets). Document this with a .error
message. For a transition period, support passing in just TARGET, but
give a .warning for that case: I plan on removing it in 9.0...
keramida [Thu, 10 Feb 2011 19:13:54 +0000 (19:13 +0000)]
Add LIBEXECDIR to the bsd.own.mk vars, pointing to /usr/libexec by default
Some of the patches we are preparing for porting ATF from NetBSD
refer to '/usr/libexec' several times. Instead of repeating the
path all over the place, add ${LIBEXECDIR} to match ${LIBDATADIR}
and reduce the redundancy of the relevant makefiles.
jhb [Thu, 10 Feb 2011 18:54:52 +0000 (18:54 +0000)]
- Add a new UNIVERSE_TARGET variable for 'make universe'. If it is set,
then that target is invoked for each architecture rather than the
default action of building world and kernels for each architecture.
- Add a 'make toolchains' wrapper which uses UNIVERSE_TARGET to build
toolchains for all architectures.
- Document JFLAG, MAKE_JUST_KERNELS, and MAKE_JUST_WORLDS variables for
'make universe'.
jpaetzel [Thu, 10 Feb 2011 15:41:32 +0000 (15:41 +0000)]
Netgear renamed the WG311 to the WG311v1 after they released a second
version of it. There is also a WG311v3 which uses a chipset covered by
malo(4). Along the way add the WG311T to the list which is also an
atheros chipset.
PR: docs/154589
Approved by: kib (mentor)
MFC after: 3 days
das [Thu, 10 Feb 2011 07:38:38 +0000 (07:38 +0000)]
Fix a bug where the wrong argument was passed to SET_FLOAT_WORD().
This bug results in a type mismatch that happens to be harmless
because of the way SET_FLOAT_WORD() works.
das [Thu, 10 Feb 2011 07:38:13 +0000 (07:38 +0000)]
Fix a bug where the wrong argument was passed to INSERT_WORDS().
This bug results in a type mismatch that happens to be harmless
because of the way INSERT_WORDS() works.
das [Thu, 10 Feb 2011 07:37:50 +0000 (07:37 +0000)]
For small arguments, these functions use simple approximations,
e.g. cos(small) = 1, sin(small) = small. This commit tightens
the thresholds at which the simple approximations are used.
das [Thu, 10 Feb 2011 07:37:29 +0000 (07:37 +0000)]
Fix a bogus threshold that was copied from the double precision version.
This commit should have no effect on correctness; it merely changes the
threshold at which a simpler approximation can be used.
netchild [Wed, 9 Feb 2011 20:23:22 +0000 (20:23 +0000)]
Linux' shm_open() fails because it wants to find some funky shmfs
to construct the full pathname. It starts to search at the default
mountpoint which is /dev/shm. If this fails it runs through fstab
and searches for shmfs and tmpfs. Whatever it finds will be
statfs()'ed to be checked for Linux' fs magic for shmfs (0x01021994).
Ideally our tmpfs should deliver this fs magic to Linux processes, but
as our tmpfs is considered to be an experimental feature we can not
assume that there is always a tmpfs available.
To make shared memory work in the Linuxulator, force the fs type of
/dev/shm (which can be a symlink) to match what Linux expects. The user
is responsible (info has to be added to the linux base ports and the docs)
to setup a suitable link for /dev/shm.
Noticed by: Andre Albsmeier <Andre.Albsmeier@siemens.com>
Submitted by: Andre Albsmeier <Andre.Albsmeier@siemens.com>
MFC after: 1 month
marcel [Wed, 9 Feb 2011 19:08:21 +0000 (19:08 +0000)]
Provide convenience function for obtaining MODINFO_ADDR and MODINFO_SIZE
attributes for preloaded modules/images. In particular, MODINFO_ADDR has
the added complexity of not always being relocated properly. Rather than
kluging this in the various components that are affected, we handle it
in a centralized place (preload_fetch_addr()). To that end, expose a new
variable, preload_addr_relocate, that MD initialization code can set and
that turns the address attribute into a valid kernel VA.
Architectures that need the relocation: arm & powerpc (at least).
Components that can utilize this: acpi(4), md(4), fb(4), pci(4), ZFS, geli.
Drivers which rely on net80211 to create the beacon need to call
ieee80211_beacon_update() on iv_update_beacon() calls. This is required
that certain bits, e.g. TIM, get updated. A call to ieee80211_beacon_alloc()
is not enough because it does not care about flags which can only change
during runtime. By design a beacon is supposed to be allocated only once
while moving into RUN state.
To handle all possible calls to iv_update_beacon() the run_updateslot()
function has been revived and run_updateprot() has been added.
run_updateslot() handles slot time changes and run_updateprot() changes
to protection, both can change while nodes associate/leave.
Submitted by: Alexander Zagrebin <alex at zagrebin.ru>,
PseudoCylon <moonlightakkiy atyahoo.ca>
MFC after: 3 weeks
adrian [Wed, 9 Feb 2011 15:43:38 +0000 (15:43 +0000)]
Add in the (very!) optional glue to flip the 11n bits for if_ath.
There's still a lot of random issues to sort out with the radio side of
things and AMPDU RX handling (and completely missing AMPDU TX handling!)
but if people wish to give this a go and assist in debugging the
issues, they can define ATH_DO_11N to enable it.
I'm just re-iterating - this is here to allow people to assist in
further 11n development; it is not any indication that the 11n support
is complete and functional.
Important notes:
* This doesn't support 1-stream cards yet - (eg AR9285) - the various bits
that negotiate TX/RX MCS don't know not to try >1 stream TX or negotiate
1-stream RX; so don't enable 11n unless you've first taught the rate
control module and the net80211 stack to negotiate 1-stream stuff;
* The only rate control module minimally 11n aware is ath_rate_sample;
* ath_rate_sample doesn't know about HT/40; so airtime will be incorrectly
calculated;
* The AR9160 and AR9280 radio code is unreliable at the higher MCS rates for
some reason; this will definitely impact 11n performance;
* AMPDU-TX isn't yet implemented;
* AMPDU-RX may be a bit buggy still and will definitely suffer from the
radio unreliability mentioned above (ie, don't expect 150/300mbit
RX just yet.)
netchild [Wed, 9 Feb 2011 15:33:13 +0000 (15:33 +0000)]
Add some FEATURE macros for some UFS features.
SU+J is not included as a FEATURE macro:
- it was not in the tree during the GSoC
- I do not see an option to en-/disable it in NOTES
Two minor changes where made during the review compared to what was developed
during GSoC 2010.
No FreeBSD version bump, the userland application to query the features will
be committed last and can serve as an indication of the availablility if
needed.
Sponsored by: Google Summer of Code 2010
Submitted by: kibab
Reviewed by: kib
X-MFC after: to be determined in last commit with code from this project
adrian [Wed, 9 Feb 2011 15:23:16 +0000 (15:23 +0000)]
Fix the keycache behaviour for multicast keycache search.
The correct bit to set is 0x1 in the high MAC address byte, not 0x80.
The hardware isn't programmed with that bit (which is the multicast
adress bit.)
The linux ath9k keycache code uses that bit in the MAC as a "this is
a multicast key!" and doesn't set the AR_KEYTABLE_VALID bit.
This tells the hardware the MAC isn't to be used for unicast destination
matching but it can be used for multicast bssid traffic.
This fixes some encryption problems in station mode.
kib [Wed, 9 Feb 2011 09:20:27 +0000 (09:20 +0000)]
Use sigsetjmp/siglongjmp with disabled signal mask access for
lock upgrade in rtld. There is no need to care about the mask,
which causes a lot of unneeded sigprocmask(2) calls during each
symbol lookup.
hselasky [Wed, 9 Feb 2011 08:01:45 +0000 (08:01 +0000)]
Minor cleanup:
- use device_printf() instead of printf() to give more accurate warnings.
- use memcpy() instead of bcopy().
- add missing #if's for non-FreeBSD compilation.
jilles [Tue, 8 Feb 2011 23:18:06 +0000 (23:18 +0000)]
sh: Import arithmetic expression code from dash.
New features:
* proper lazy evaluation of || and &&
* ?: ternary operator
* executable is considerably smaller (8K on i386) because lex and yacc are
no longer used
Differences from dash:
* arith_t instead of intmax_t
* imaxdiv() not used
* unset or null variables default to 0
* let/exp builtin (undocumented, will probably be removed later)
pjd [Tue, 8 Feb 2011 23:08:20 +0000 (23:08 +0000)]
Unlink UNIX domain socket file only if:
1. The descriptor is the one we are listening on (not the one when we connect
as a client and not the one which is created on accept(2)).
2. Descriptor was created by us (PID matches with the PID stored on bind(2)).
marcel [Tue, 8 Feb 2011 22:16:29 +0000 (22:16 +0000)]
Improve the error interrupt handler. In particular, read the
error address on a decoding error to unlatch it and to allow
us to print a better diagnostics message. This also has the
side effect of clearing the condition, which prevents an
interrupt storm.
adrian [Tue, 8 Feb 2011 20:16:43 +0000 (20:16 +0000)]
net80211 really doesn't want A_MPDU to appear on non-11n station node mbufs.
Revert back to the previous method of doing it for where a node can be
identified and it's an 11n node.
I'll have to do some further research into exactly what is being messed up
with the sequence number matching and I'll then revisit this.
adrian [Tue, 8 Feb 2011 18:31:28 +0000 (18:31 +0000)]
Commit some missing bits to the sample rate module to (more) correctly calculate 802.11n packet duration.
This doesn't yet take into account HT40 packet durations as the node info
(needed to know if it's a HT20 or HT40 node) isn't available everywhere
it needs to be.
jhb [Tue, 8 Feb 2011 13:02:25 +0000 (13:02 +0000)]
After reading a bitmap block for i-nodes or blocks, recheck the count of
free i-nodes or blocks to handle a race where another thread might have
allocated the last i-node or block while we were waiting for the buffer.
adrian [Tue, 8 Feb 2011 12:49:01 +0000 (12:49 +0000)]
There's apparently a bug with Merlin (AR9280) and later chipsets where
putting descriptors (not buffers) across a 4k page boundary can cause issues.
I've not seen it in production myself but it apparently can cause problems.
So, in preparation for addressing this workaround, (re)-expose the particular
HAL capability bit which marks whether the chipset has support for cross-4k-
boundary transactions or not.
A subsequent commit will modify the descriptor allocation to avoid allocating
descriptor entries that straddle a 4k page boundary.
delphij [Tue, 8 Feb 2011 11:32:22 +0000 (11:32 +0000)]
Don't consider ioctl returning error as a fatal error and move on to next
disk. When multiple devices are specified, a non-supporting ioctl will
cause diskinfo(8) to stop at the point which does not seem to be necessary.
marcel [Tue, 8 Feb 2011 01:49:30 +0000 (01:49 +0000)]
In arm_get_next_irq(), use the last IRQ argument in order to prevent
a hard hang due to an interrupt storm or stuck interrupt pin. We
return the next IRQ that is larger than the last one returned and
in doing so give all interrupts a fair chance of being handled.
Consequently, we're able to break into the kernel debugger in such
an event.
marcel [Tue, 8 Feb 2011 01:43:45 +0000 (01:43 +0000)]
o Make sure to mask off timer1 interrupts. It's not necessarily
masked-off by the firmware.
o In DELAY(). Make sure we have an inner-loop body that the compiler
cannot eliminate. While timing does not have to be perfect, the
loops must be there to have at least some notion of delay.
mdf [Tue, 8 Feb 2011 00:36:46 +0000 (00:36 +0000)]
Remove the uio_yield prototype and symbol. This function has been
misnamed since it was introduced and should not be globally exposed
with this name. The equivalent functionality is now available using
kern_yield(curthread->td_user_pri). The function remains
undocumented.
mdf [Tue, 8 Feb 2011 00:16:36 +0000 (00:16 +0000)]
Based on discussions on the svn-src mailing list, rework r218195:
- entirely eliminate some calls to uio_yeild() as being unnecessary,
such as in a sysctl handler.
- move should_yield() and maybe_yield() to kern_synch.c and move the
prototypes from sys/uio.h to sys/proc.h
- add a slightly more generic kern_yield() that can replace the
functionality of uio_yield().
- replace source uses of uio_yield() with the functional equivalent,
or in some cases do not change the thread priority when switching.
- fix a logic inversion bug in vlrureclaim(), pointed out by bde@.
- instead of using the per-cpu last switched ticks, use a per thread
variable for should_yield(). With PREEMPTION, the only reasonable
use of this is to determine if a lock has been held a long time and
relinquish it. Without PREEMPTION, this is essentially the same as
the per-cpu variable.
jkim [Mon, 7 Feb 2011 21:26:46 +0000 (21:26 +0000)]
Introduce a non-portable function pthread_getthreadid_np(3) to retrieve
calling thread's unique integral ID, which is similar to AIX function of
the same name. Bump __FreeBSD_version to note its introduction.
- Use LINE_MAX from limits.h as the maximum line length instead of
BUFSIZ. Use LINE_MAX * 2 as the buffer size (BSIZE).
- Error out if we encounter a line longer than LINE_MAX. The previous
behavior was to silently split long lines and produce corrupted
output.