Enji Cooper [Wed, 1 Mar 2017 04:54:06 +0000 (04:54 +0000)]
Simplify/improve idioms in usr.sbin/ntp Makefiles
- Use SRCTOP-relative paths to other directories instead of
.CURDIR-relative ones. This simplifies pathing in make/displayed output.
- Also, use :H where possible/sensical to manipulate .CURDIR-relative
paths
- Remove superfluous bsd.own.mk .includes which are already handled via
src.opts.mk .includes
Warner Losh [Wed, 1 Mar 2017 04:40:57 +0000 (04:40 +0000)]
Update tw_cl_share.h to allow 255 LUNs
TW_CL_MAX_NUM_LUNS should not be 16 but I presume 255. I have a 3ware
controller with more than 16 volumes (LUN's) and otherwise all LUN's
above the 16'th are not working.
Warner Losh [Wed, 1 Mar 2017 04:27:58 +0000 (04:27 +0000)]
Make wsp process a single touchpad tap and interpret it as a
left-click event. It can be disabled setting the new
hw.usb.wsp.enable_single_tap_clicks sysctl to 0.
Submitted by: K Staring <qdk@quickdekay.net>
Pull Request: https://github.com/freebsd/freebsd/pull/97
Warner Losh [Tue, 28 Feb 2017 23:42:47 +0000 (23:42 +0000)]
Renumber copyright clause 4
Renumber cluase 4 to 3, per what everybody else did when BSD granted
them permission to remove clause 3. My insistance on keeping the same
numbering for legal reasons is too pedantic, so give up on that point.
Submitted by: Jan Schaumann <jschauma@stevens.edu>
Pull Request: https://github.com/freebsd/freebsd/pull/96
When IPv6 fragments reassembly is complete, update mbuf's csum_data
and csum_flags using information from all fragments. This fixes
dropping of reassembled packets due to wrong checksum when the IPv6
checksum offloading is enabled on a network card.
Dmitry Chagin [Tue, 28 Feb 2017 19:49:21 +0000 (19:49 +0000)]
FreeBSD does not have analgue for epill EPOLLPRI event type.
So, do not set EPOLLPRI event acidently.
Also, do not set EPOLLWRNORM and EPOLLRDNORM events as epoll
do not set this events.
Navdeep Parhar [Tue, 28 Feb 2017 19:27:41 +0000 (19:27 +0000)]
cxgbe/iw_cxgbe: fix various double-close panics with iWARP sockets.
Sockets representing the TCP endpoints for iWARP connections are
allocated by the ibcore module. Before this revision they were closed
either by the ibcore module or the iw_cxgbe hardware driver depending on
the state transitions during connection teardown. This is error prone
and there were cases where both iw_cxgbe and ibcore closed the socket
leading to double-free panics. The fix is to let ibcore close the
sockets it creates and never do it in the driver.
- Use sodisconnect instead of soclose (preceded by solinger = 0) in the
driver to tear down an RDMA connection abruptly. This does what's
intended without releasing the socket's fd reference.
- Close the socket in ibcore when the iWARP iw_cm_id is destroyed. This
works for all kinds of sockets: clients that initiate connections,
listeners, and sockets accepted off of listeners.
Reviewed by: Steve Wise @ Open Grid Computing, hselasky@
MFC after: 3 days
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D9796
Andriy Gapon [Tue, 28 Feb 2017 18:48:12 +0000 (18:48 +0000)]
Local APIC: add support for extended LVT entries found in AMD processors
The extended LVT entries can be used to configure interrupt delivery
for various events that are internal to a processor and can use this
feature.
All current processors that support the feature have four of such entries.
The entries are all masked upon the processor reset, but it's possible
that firmware may use some of them.
BIOS and Kernel Developer's Guides for some processor models do not assign
any particular names to the extended LVTs, while other BKDGs provide names
and suggested usage for them.
However, there is no fixed mapping between the LVTs and the processor
events in any processor model that supports the feature. Any entry can be
assigned to any event. The assignment is done by programming an offset
of an entry into configuration bits corresponding to an event.
This change does not expose the flexibility that the feature offers.
The change adds just a single method to configure a hardcoded extended LVT
entry to deliver APIC_CMC_INT. The method is designed to be used with
Machine Check Error Thresholding mechanism on supported processor models.
For references please see BKDGs for families 10h - 16h and specifically
descriptions of APIC30, APIC400, APIC[530:500] registers.
For a description of the Error Thresholding mechanism see, for example,
BKDG for family 10h, section 2.12.1.6.
http://developer.amd.com/resources/developer-guides-manuals/
Scott Long [Tue, 28 Feb 2017 18:25:06 +0000 (18:25 +0000)]
Implement sbuf_prf(), which takes an sbuf and outputs it
to stdout in the non-kernel case and to the console+log
in the kernel case. For the kernel case it hooks the
putbuf() machinery underneath printf(9) so that the buffer
is written completely atomically and without a copy into
another temporary buffer. This is useful for fixing
compound console/log messages that become broken and
interleaved when multiple threads are competing for the
console.
Emmanuel Vadot [Tue, 28 Feb 2017 15:44:21 +0000 (15:44 +0000)]
allwinner: A31: Add ccung driver
This adds clocks support for the aw_ccung on the A31 SoC.
Newer DTS files require this.
All the clocks except two CSI are defined and exported on the clock domain.
Alexander Motin [Tue, 28 Feb 2017 05:17:50 +0000 (05:17 +0000)]
Add safety check against too long CDB.
SBP-2 specification defined maximum CDB length as 12 bytes. Newer SBP-3
specification allows CDB of any size, but this driver is too old. Proper
solution would be to look on maximal ORB size supported by the target.
Enji Cooper [Tue, 28 Feb 2017 04:48:30 +0000 (04:48 +0000)]
Use "build" instead of "all" when building ports modules
"all" in ports currently means "stage the ports", which requires root today,
and brings to light other potential issues, like ENAMETOOLONG with staged
directories (bug 161481, etc).
This fixes buildkernel for me when run as a non-root user, assuming all
of the prerequisites have been installed beforehand and are up-to-date.
Justin Hibbits [Tue, 28 Feb 2017 04:31:28 +0000 (04:31 +0000)]
Make kernel breakpoints work for book-e
Add the necessary bits to enable kernel breakpoints for Book-E. The entrypoint
for program exception is very trivial, so rather than expand it to be similar to
AIM, add it into the standard trap handler.
This wasn't blocked out as Book-E specific because it is only a minor redundancy
over AIM, which should have already called db_trap_glue() at this point. If
it's going to panic with a fatal trap anywya, it doesn't matter if it goes
through this path again.
Justin Hibbits [Tue, 28 Feb 2017 04:13:20 +0000 (04:13 +0000)]
Unbreak kernel breakpoints, broken for ~4 years now
When committing DTrace in 2012/2013 era I inadvertently broke breakpoints, by
setting EXC_DTRACE to the same value as BKPT_INST. Change EXC_DTRACE to a
different, yet logically identical, trap (tw <all>,31,31).
Stephen Hurd [Tue, 28 Feb 2017 02:27:51 +0000 (02:27 +0000)]
bnxt: propagate RSS hash type to the network stack.
RSS hash type will be used to identify the CPU on to which, a receive packet
will be queued. This patch extracts the "RSS hash type" from the receive
completion and sends it to the stack.
1. state checks in bxe_tx_mq_start_locked() and bxe_tx_mq_start() to sync threads during interface down or detach.
2. add sysctl to set pause frame parameters
3. increase max segs for TSO packets to BXE_TSO_MAX_SEGMENTS (32)
4. add debug messages for PHY
5. HW LRO support restricted to FreeBSD versions 8.x and above.
Submitted by:Vaishali.Kulkarni@cavium.com
MFC after:5 days
Andriy Gapon [Mon, 27 Feb 2017 17:36:31 +0000 (17:36 +0000)]
fix lvt_mode: edge-triggered interrupt mode is set by clearing APIC_LVT_TM
The fixed is used only to fix up buggy MPTable information and the
trigger mode is probably ignored for the relevant interrupt types
anyway. Still, it's better to be standards compliant and have the code
do what it says it does.
Fix startup race initialising ACPI CM battery structures on MacBookPro.
During acpi_cmbat_attach() the acpi_cmbat_init_battery() notification
handler is registered. It has been observed this notification handler
can be called instantly, before the attach routine has returned. In
the notification handler there is a call to device_is_attached() which
returns false. Because the softc is set we know an attach is in
progress and the fix is simply to wait and try again in this case.
Mariusz Zaborski [Sun, 26 Feb 2017 22:07:26 +0000 (22:07 +0000)]
Don't try to open devices in the gettc() function which will always
fail in the Capability mode. Instead silently fallback to the syscall
method, which is done for example in the gettimeofday(2) function.
Jayachandran C. [Sun, 26 Feb 2017 22:05:22 +0000 (22:05 +0000)]
Enable pl011 UART FIFOs
The pl011 UART has a 16 entry Tx FIFO and a 16 entry Rx FIFO that
have not been used so far. Update the driver to enable the FIFOs
and use them in transmit and receive.
Reviewed by: andrew
Differential Revision: https://reviews.freebsd.org/D8819
net80211 drivers: fix rate setup for EAPOL frames, obtain Tx parameters
directly from the node.
- Use ni_txparms directly instead of calculating them manually every time
- Move M_EAPOL flag check upper; otherwise it may be skipped due to
'ucastrate' / 'mcastrate' check
- Use 'mgtrate' for control frames too (see ifconfig(8), mgtrate parameter)
- Add few more M_EAPOL checks where it was missing (zyd(4), ural(4),
urtw(4))
- Few unrelated cleanups
Tested with:
- Intel 6205 (iwn(4)), STA mode;
- WUSB54GC (rum(4)), HOSTAP mode + RTL8188EU (rtwn(4)), STA mode.
Reviewed by: adrian
Differential Revision: https://reviews.freebsd.org/D9811