Warner Losh [Sun, 13 Apr 2008 07:44:55 +0000 (07:44 +0000)]
FreeBSD/mips port. The FreeBSD/mips port targets mips32, mips64,
mips32r2 and mips64r2 (and close relatives) processors. There
presently is support for ADMtek ADM5120, A mips 4Kc in a malta board,
the RB533 routerboard (based on IDT RC32434) and some preliminary
support for sibtye/broadcom designs. Other hardware support will be
forthcomcing.
This port boots multiuser under gxemul emulating the malta board and
also bootstraps on the hardware whose support is forthcoming...
Oleksandr Tymoshenko, Wojciech Koszek, Warner Losh, Olivier Houchard,
Randall Stewert and others that have contributed to the mips2 and/or
mips2-jnpr perforce branches. Juniper contirbuted a generic mips port
late in the life cycle of the misp2 branch. Warner Losh merged the
mips2 and Juniper code bases, and others list above have worked for
the past several months to get to multiuser.
In addition, the mips2 work owe a debt to the trail blazing efforts of
the original mips branch in perforce done by Juli Mallett.
Warner Losh [Sun, 13 Apr 2008 07:27:37 +0000 (07:27 +0000)]
FreeBSD/mips port. The FreeBSD/mips port targets mips32, mips64,
mips32r2 and mips64r2 (and close relatives) processors. There
presently is support for ADMtek ADM5120, A mips 4Kc in a malta board,
the RB533 routerboard (based on IDT RC32434) and some preliminary
support for sibtye/broadcom designs. Other hardware support will be
forthcomcing.
This port boots multiuser under gxemul emulating the malta board and
also bootstraps on the hardware whose support is forthcoming...
Oleksandr Tymoshenko, Wojciech Koszek, Warner Losh, Olivier Houchard,
Randall Stewert and others that have contributed to the mips2 and/or
mips2-jnpr perforce branches. Juniper contirbuted a generic mips port
late in the life cycle of the misp2 branch. Warner Losh merged the
mips2 and Juniper code bases, and others list above have worked for
the past several months to get to multiuser.
In addition, the mips2 work owe a debt to the trail blazing efforts of
the original mips branch in perforce done by Juli Mallett.
Warner Losh [Sun, 13 Apr 2008 07:07:57 +0000 (07:07 +0000)]
FreeBSD/mips port. The FreeBSD/mips port targets mips32, mips64,
mips32r2 and mips64r2 (and close relatives) processors. There
presently is support for ADMtek ADM5120, A mips 4Kc in a malta board,
the RB533 routerboard (based on IDT RC32434) and some preliminary
support for sibtye/broadcom designs. Other hardware support will be
forthcomcing.
This port boots multiuser under gxemul emulating the malta board and
also bootstraps on the hardware whose support is forthcoming...
Oleksandr Tymoshenko, Wojciech Koszek, Warner Losh, Olivier Houchard,
Randall Stewert and others that have contributed to the mips2 and/or
mips2-jnpr perforce branches. Juniper contirbuted a generic mips port
late in the life cycle of the misp2 branch. Warner Losh merged the
mips2 and Juniper code bases, and others list above have worked for
the past several months to get to multiuser.
In addition, the mips2 work owe a debt to the trail blazing efforts of
the original mips branch in perforce done by Juli Mallett.
Warner Losh [Sun, 13 Apr 2008 06:25:43 +0000 (06:25 +0000)]
Merge in the mips specific configuration files and such from the
merged juniper and mips2 code base. This represents the work of
Juniper Engineers, plus Oleksandr Tymoshenko, Wojciech Koszek, Warner
Losh, Olivier Houchard, Randall Stewert and others that have
contributed to the mips2 and/or mips2-jnpr perforce branches.
Qing Li [Sun, 13 Apr 2008 06:12:13 +0000 (06:12 +0000)]
These files handle the radix tree for the ECMP routes.
The original code from KAME did not take care of address
aliases or multiple ip addresses that have the same
prefix.
Qing Li [Sun, 13 Apr 2008 05:45:14 +0000 (05:45 +0000)]
This patch provides the back end support for equal-cost multi-path
(ECMP) for both IPv4 and IPv6. Previously, multipath route insertion
is disallowed. For example,
When multipath routes exist, the "route delete" command requires
a specific gateway to be specified or else an error message would
be displayed. For example,
route delete default
would fail and trigger the following error message:
"route: writing to routing socket: No such process"
"delete net default: not in table"
On the other hand,
route delete default 10.2.5.2
would be successful: "delete net default: gateway 10.2.5.2"
One does not have to specify a gateway if there is only a single
route for a particular destination.
I need to perform more testings on address aliases and multiple
interfaces that have the same IP prefixes. This patch as it
stands today is not yet ready for prime time. Therefore, the ECMP
code fragments are fully guarded by the RADIX_MPATH macro.
Include the "options RADIX_MPATH" in the kernel configuration
to enable this feature.
struct lock_instance and struct lock_list_entry don't need to be in the
public namespace for WITNESS as they are only used internally so just
move them in the private namespace for the subsystem (with all related
supporting definitions).
- Re-introduce WITNESS support for lockmgr. About the old implementation
the only one difference is that lockmgr*() functions now accept
LK_NOWITNESS flag which skips ordering for the instanced calling.
- Remove an unuseful stub in witness_checkorder() (because the above check
doesn't allow ever happening) and allow witness_upgrade() to accept
non-try operation too.
Ariff Abdullah [Sat, 12 Apr 2008 15:07:32 +0000 (15:07 +0000)]
- Add codec id for Sigmatel STAC9205
- Fix speaker issues with Dell Vostro 1500 (GPIO0)
Tested by: John Wright <jwright.gmail.com>
- Apply ridiculous quirk on Asus A8X series (A8JC, A8M, A8xx, etc). These
different laptop series share simmilar pci id, hardware codecs, etc.
but works differently. A slight difference in connection type for
widget #26 is used to differentiate it.
Tested by: eric baumbach <embaumbach.gmail.com>
- Apply GPIO0 quirk for ASUS G2K laptop
- Sort ASUS ids accordingly.
David Schultz [Sat, 12 Apr 2008 03:11:36 +0000 (03:11 +0000)]
Make several changes to the way printf handles hex floating point (%a):
1. Previously, printing the number 1.0 could produce 0x1p+0, 0x2p-1,
0x4p-2, or 0x8p-3, depending on what happened to be convenient. This
meant that printing a value as a double and printing the same value
as a long double could produce different (but equivalent) results.
The change is to always make the leading digit a 1, unless the
number is 0. This solves the aforementioned problem and has
several other advantages.
2. Use the FPU to do rounding. This is far simpler and more portable
than manipulating the bits, and it fixes an obsure round-to-even
bug. It also raises the exceptions now required by IEEE 754R.
The drawbacks are that it is usually slightly slower, and it makes
printf less effective as a debugging tool when the FPU is hosed
(e.g., due to a buggy softfloat implementation).
3. On i386, twiddle the rounding precision so that (2) works properly
for long doubles.
4. Make several simplifications that are now possible due to (2).
5. Split __hldtoa() into a separate file.
Thanks to remko for access to a sparc64 box for testing.
David Schultz [Sat, 12 Apr 2008 03:09:51 +0000 (03:09 +0000)]
Make the software emulator for long doubles set the FPU exception
flags appropriately. The next step is to make it raise a SIGFPE if
any exceptions are unmasked.
Thanks to remko for access to a sparc64 box for testing.
- Fixed a problem with the send chain consumer index which would cause
TX traffic to sit in the send chain until a received packet kick
started the interrupt handler. This would cause extremely slow
performance when used with NFS over UDP.
- Removed untested polling code.
- Updated copyright year in the file header.
- Removed inadvertent ^M's created by DOS text editor.
Ariff Abdullah [Fri, 11 Apr 2008 15:26:25 +0000 (15:26 +0000)]
Don't mess up with CHN_F_TRIGGERED, since it should exclusively
be handled by chn_abort() and chn_start() alone. This should fix
few issues with single duplex hardware (mostly) or pre virtual record
(RELENG 6) under WINE emulation and possibly others that using
SNDCTL_DSP_SETTRIGGER.
Ruslan Ermilov [Fri, 11 Apr 2008 11:34:09 +0000 (11:34 +0000)]
Allocate enough memory for pcpu_cp_time[] to stop sysctl() from
writing outside of array bounds. This fully fixes -P display on
i386, where kern.cp_times prints zeroes for non-existing CPUs.
Fix the brokenness in the former commit, sorry for the mess.
The problem is that the PM support is part of a much larger WIP here, but due to popular demand I decided to get some of it imported.
Jeff Roberson [Fri, 11 Apr 2008 09:48:12 +0000 (09:48 +0000)]
- Use a lockmgr lock rather than a mtx to protect dirhash. This lock
may be held for the duration of the various dirhash operations which
avoids many complex unlock/lock/revalidate sequences.
- Permit shared locks on lookup. To protect the ip->i_dirhash pointer we
use the vnode interlock in the shared case. Callers holding the
exclusive vnode lock can run without fear of concurrent modification to
i_dirhash.
- Hold an exclusive dirhash lock when creating the dirhash structure for
the first time or when re-creating a dirhash structure which has been
recycled.
Jeff Roberson [Fri, 11 Apr 2008 09:44:25 +0000 (09:44 +0000)]
- cache dp->i_offset in the local 'i_offset' variable for use in loop
indexes so directory lookup becomes shared lock safe. In the modifying
cases an exclusive lock is held here so the commit routine may
rely on the state of i_offset.
- Similarly handle i_diroff by fetching at the start and setting only once
the operation is complete. Without the exclusive lock these are only
considered hints.
- Assert that an exclusive lock is held when we're preparing for a commit
routine.
- Honor the lock type request from lookup instead of always using exclusive
locking.
Optimize package registration/deregistration. Previously, when looking up the
package name for the origin of a dependency, all entries in /var/db/pkg were
traversed for each dependency of added/removed package. Now, gather all the
origins first, then do the lookup in a single pass over /var/db/pkg.
This should provide a major speedup for packages with hundreds of dependencies.
I've taken a slightly different approach than is used with the ICH8 controllers
in that each controller is not identified individually (eg USB A, USB B, etc).
Instead I've given then same description to each one even though the device ID
differs. This can easily be changed if desired, or ICH8 (and any others using
that approach) can be made to work as this does.
Jeff Roberson [Fri, 11 Apr 2008 03:27:42 +0000 (03:27 +0000)]
- Add support for interrupt bindig to cpuset(1). Interrupts are bound
by specifying the interrupt with -x <irq>. The irq number matches
those displayed by vmstat -i.
Jeff Roberson [Fri, 11 Apr 2008 03:26:41 +0000 (03:26 +0000)]
- Add the interrupt vector number to intr_event_create so MI code can
lookup hard interrupt events by number. Ignore the irq# for soft intrs.
- Add support to cpuset for binding hardware interrupts. This has the
side effect of binding any ithread associated with the hard interrupt.
As per restrictions imposed by MD code we can only bind interrupts to
a single cpu presently. Interrupts can be 'unbound' by binding them
to all cpus.
Xin LI [Thu, 10 Apr 2008 23:49:23 +0000 (23:49 +0000)]
Add a new flag, '-C' which enables a special mode that is intended for
catastrophic recovery. Currently, this mode only validates whether a
cylindergroup has good signature data, and prompts the user to decide
whether to clear it as a whole.
This mode is useful when there is data damage on a disk and you are
working on copy of the original disk, as fsck_ffs(8) tends to abnormally
exit in such case, as a last resort to recover data from the disk.
Warner Losh [Thu, 10 Apr 2008 22:57:54 +0000 (22:57 +0000)]
Fix a bug introduced by DEFAULTS feature. When the config file
doesn't exist, we make a directory and then say "oops, that file isn't
there" leaving the directory behind. Add a stat for the config file
so that we detect this before making the directory. This is
semi-lame, but less lame than having this bug.
Ruslan Ermilov [Thu, 10 Apr 2008 16:17:54 +0000 (16:17 +0000)]
Fix "top -P" (`&' mistyped as `&&' and a botched logic).
The bug was unnoticed on non-i386 because mp_maxid is
initialized differently, kern.cp_times doesn't print
zeroes for non-existing CPUs, so no "writing outside of
array bounds" happens.
Alan Cox [Thu, 10 Apr 2008 16:04:50 +0000 (16:04 +0000)]
Correct pmap_copy()'s method for extracting the physical address of a
2/4MB page from a PDE. Specifically, change it to use PG_PS_FRAME,
not PG_FRAME, to extract the physical address of a 2/4MB page from a
PDE.
Change the last argument passed to pmap_pv_insert_pde() from a
vm_page_t representing the first 4KB page of a 2/4MB page to the
vm_paddr_t of the 2/4MB page. This avoids an otherwise unnecessary
conversion from a vm_paddr_t to a vm_page_t in pmap_copy().
It seems that RealTek 8129/8139 chip reports invalid length of
received frame under certain conditions. wpaul said the length
0xfff0 is special meaning that indicates hardware is in the
process of copying a packet into host memory. But it seems
there are other cases that hardware is busy or stuck in bad
situation even if the received frame length is not 0xfff0.
To work-around this condition, add a check that verifys that
recevied frame length is in valid range. If received length is out
of range reinitialize hardware to recover from stuck condition.
Reported by: Mike Tancsa ( mike AT sentex DOT net )
Tested by: Mike Tancsa
Obtained from: OpenBSD
MFC after: 1 week
- Use LK_TYPE_MASK where needed. Actually after sys/sys/lockmgr.h:1.69 it is
no longer needed, but for now we still want to be consistent with other
similar checks in the tree.
- Call ASSERT_VOP_ELOCKED() only when vget() returns 0.
Sam Leffler [Wed, 9 Apr 2008 19:07:48 +0000 (19:07 +0000)]
Do image loading in a context known to have a root directory:
o create a private task queue thread that sets up root and current
directories (hooking mountroot event as needed); this is necessary
because task queue threads are parented from proc0 and it does not
have a reference to rootvnode (lost when / mounting moved to init)
o bounce image load + unload requests through the private task q so
we can load images even when the request is made from a thread that
does not have sufficient context (e.g. task q thread)
o add a check in the task q thread to fail requests before root is
mounted (just in case)
Reviewed by: jhb, mlaier, luigi (glance)
MFC after: 1 month
Roman Divacky [Wed, 9 Apr 2008 16:42:50 +0000 (16:42 +0000)]
Remove using magic value of -1 to distinguish between linux_open()
and linux_openat(). Instead just pass AT_FDCWD into linux_common_open()
for the linux_open() case. This prevents passing -1 as a dirfd to
openat() from succeeding which is wrong.
Take the route mtu into account, if available, when sending an
ICMP unreach, frag needed. Up to now we only looked at the
interface MTU. Make sure to only use the minimum of the two.
In case IPSEC is compiled in, loop the mtu through ip_ipsec_mtu()
to avoid any further conditional maths.
Without this, PMTU was broken in those cases when there was a
route with a lower MTU than the MTU of the outgoing interface.
PR: kern/122338
Tested by: Mark Cammidge mark peralex.com
Reviewed by: silence on net@
MFC after: 2 weeks
Reimplement atomic_add, atomic_clear, atomic_set and atomic_subtract
so that all implemented variants have proper prototypes. The 8-bit,
16-bit and 64-bit variants are not implemented.
This really fixes the current build breakages caused by type casting
and struct aliasing rules.
Add rfcomm_pppd_server rc script to allow start rfcomm_pppd(8) in server
mode at boot time. Multiple profiles can be started at the same time.
The whole idea is very similar to the ppp rc script.
Sam Leffler [Tue, 8 Apr 2008 23:12:15 +0000 (23:12 +0000)]
o add rc.conf knobs to set the wpa_supplicant program, logging flags,
and config file
o change default logging options from -q to -s (log to syslog); this
is currently broken for boot-time startup as syslogd is started too
late but that'll be dealt with separately
Jung-uk Kim [Tue, 8 Apr 2008 17:55:26 +0000 (17:55 +0000)]
- Add write(2) support for psm(4) in native operation level. Now arbitrary
commands can be written to /dev/psm%d and status can be read back from it.
- Reflect the change in psm(4) and bump version for ports.