ar: shuffle symbol offsets during conversion for 32-bit ar archives
During processing we maintain symbol offsets in the 64-bit s_so array,
and when writing the archive convert to 32-bit if no offsets are greater
than 4GB. However, this was somewhat inefficient as we looped over the
array twice: first, converting to big endian and second, writing each
32-bit value one at a time (and incorrectly so on big-endian platforms).
Instead, when writing a 32-bit archive shuffle convert symbol data to
big endian (as required by the ar format) and shuffle to the beginning
of the allocation at the same time.
Also correct emission of the symbol count on big endian platforms.
Further changes are planned, but this should fix powerpc64.
Reported by: jhibbits, mlinimon
Reviewed by: jhibbits, Gerald Aryeetey (earlier)
Tested by: jhibbits
MFC after: 10 days
MFC with: r346079
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D20007
Fix mouse cursor coloring in depths > 8 (previously, a hack that only
worked right for white interiors and black borders was used). Advertise
this by changing the default colors to a red interior and a white
border (the same as the kernel default). Add undocumented env variables
for changing these colors. Also change to the larger and better-shaped
16x10 cursor sometimes used in the kernel. The kernel choice is
fancier, but libvgl is closer to supporting the larger cursors needed
in newer modes.
The (n)and-or logic for the cursor doesn't work right for more than 2
colors. The (n)and part only masks out all color bits for the pixel
under the cursor when all bits are set in the And mask. With more
complicated logic, the non-masked bits could be used to implement
translucent cursors, but they actually just gave strange colors
(especially in packed and planar modes where the bits are indirect
through 1 or 2 palettes so it is hard to predict the final color).
They also gave a bug for writing pixels under the cursor. The
non-masked bits under the cursor were not combined in this case.
Drop support for combining with bits under the cursor by making any nonzero
value in the And mask mean all bits set.
Convert the Or mask (which is represented as a half-initialized 256-color
bitmap) to a fully initialized bitmap with the correct number of colors.
The 256-color representation must be as in 3:3:2 direct mode iff the final
bitmap has more than 256 colors. The conversion of colors is not very
efficient, so convert at initialization time.
Track device's NUMA domain in ifnet & alloc ifnet from NUMA local memory
This commit adds new if_alloc_domain() and if_alloc_dev() methods to
allocate ifnets. When called with a domain on a NUMA machine,
ifalloc_domain() will record the NUMA domain in the ifnet, and it will
allocate the ifnet struct from memory which is local to that NUMA
node. Similarly, if_alloc_dev() is a wrapper for if_alloc_domain
which uses a driver supplied device_t to call ifalloc_domain() with
the appropriate domain.
Note that the new if_numa_domain field fits in an alignment pad in
struct ifnet, and so does not alter the size of the structure.
Build libclang_rt/profile on all clang-supported architectures
There's no reason why a special case needs to be added specifically for amd64,
arm, and i386, as the code is written in machine architecture agnostic C/C++.
This will make it possible for all supporting clang architectures to produce
runtime coverage with `--coverage`.
MFC after: 2 weeks
Reviewed by: dim
Differential Revision: https://reviews.freebsd.org/D20003
r345708 worked for the base system, but unfortunately, caused a lot of
disruption for third-party packages that relied on C++, since bsd.sys.mk is
used by applications outside the base system. The defaults picked didn't match
the compiler's defaults and broke some builds that didn't specify a standard,
as well as some that overrode the value by setting `-std=gnu++14` (for
example) manually.
This change takes a more relaxed approach to appending `-std=${CXXSTD}` to
CXXFLAGS, by only doing so when the value is specified, as opposed to
overriding the standard set by an end-user. This avoids the need for having
to bake NOP default into bsd.sys.mk for supported compiler-toolchain
versions.
In order to make this change possible, add CXXSTD to Makefile snippets which
relied on the default value (c++11) added in r345708.
MFC after: 2 weeks
MFC with: r345708, r346574
Reviewed by: emaste
Reported by: jbeich
Differential Revision: https://reviews.freebsd.org/D19895 (as part of a larger change)
Get the information from the image that we're booting and store it in
a global variable. Prefer using this to passing it around. Remove the
special case for zfs that set the preferred boot handle by having it
uses this global variable diretly.
This change allows the user to once again override the C++ standard, restoring
high-level pre-r345708 behavior.
This also unbreaks building lib/ofed/libibnetdisc/Makefile with a non-C++11
capable compiler, e.g., g++ 4.2.1, as the library supported being built with
older C++ standards.
MFC after: 2 weeks
MFC with: r345708
Reviewed by: emaste
Reported by: jbeich
Differential Revision: https://reviews.freebsd.org/D19895 (as part of a larger change)
There's no reason we can't setup the console first thing after the
arch flags are setup. We set it undconditionally to efi. This is a
good default, and will get us error messages to at least the efi
console no matter what. This will also prime the pump so that as other
variables are set, they will take effect and the console will be
correct as soon as those env vars are set. Also remove the redundant
setting of the console to efi when we know the console is efi.
cxgbe(4): Make sure bundled_fw is always initialized before use.
This fixes a bug that prevented the driver from auto-flashing the
firmware when it didn't see one on the card. This feature was
introduced in r321390 and this bug was introduced in r343269.
cem [Mon, 22 Apr 2019 16:29:34 +0000 (16:29 +0000)]
random.3: Remove obsolete BUGS section
Relative performance to rand(3) is sort of irrelevant; they do different things
and a user with sensitivity to RNG performance won't use libc random(3) anyway.
The historical note about bad seeding is long obsolete, referring to a 1996 or
earlier version of FreeBSD.
Use separate descriptors in bhyve's stdio uart backend.
bhyve was previously using stdin for both reading and writing to the
console, which made it difficult to redirect console output. Use
stdin for reading and stdout for writing. This makes it easier to use
bhyve as a backend for syzkaller.
As a side effect, the change fixes a minor bug which would cause bhyve
to fail with ENOTCAPABLE if configured to use nmdm for com1 and stdio
for com2.
bhyveload already uses separate descriptors, as does the bvmcons driver.
Reviewed by: jhb
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D19788
libbe(3): allow creation of arbitrary depth boot environments
libbe currently only provides an API to create a recursive boot environment,
without any formal support for intentionally limiting the depth. This
changeset adds an API, be_create_depth, that may be used to arbitrarily
restrict the depth of the new BE.
Disable vm map consistency checking by default on INVARIANTS kernels.
The checks are too expensive for a general-purpose kernel. Enable the
checks when DIAGNOSTIC is defined and provide a sysctl to enable the
checks in a non-DIAGNOSTIC INVARIANTS kernel.
Reviewed by: kib
Discussed with: Doug Moore <dougm@rice.edu>
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D19999
Fix sys.kern.coredump_phnum_test.coredump_phnum on i386
The zero-padding when printing out the Size field is on 32-bit architectures is
5, not 15. Adjust the regular expression to work with both the 32-bit and
64-bit case.
Initialize `oldlen` to the size of the value, instead of leaving the value
unitialized. Leaving it unitialized seems to work by accident on amd64 when
running 64-bit programs, but not on i386.
Fix panic in network stack due to memory use after free in relation to
fragmented packets.
When sending IPv4 and IPv6 fragmented packets and a fragment is lost,
the mbuf making up the fragment will remain in the temporary hashed
fragment list for a while. If the network interface departs before the
so-called slow timeout clears the packet, the fragment causes a panic
when the timeout kicks in due to accessing a freed network interface
structure.
Make sure that when a network device is departing, all hashed IPv4 and
IPv6 fragments belonging to it, get freed.
Backtrace:
panic()
icmp6_reflect()
hlim = ND_IFINFO(m->m_pkthdr.rcvif)->chlim;
^^^^ rcvif->if_afdata[AF_INET6] is NULL.
According to specs and common sense, all sense data reported in descriptor
format should be valid. But practice shows different, some devices return
descriptors with invalid data, resulting in error messages looking worse.
Decouple block/stream commands sense data and information field printing.
Looking on present specs, there are much more cases when those fields are
not related, and incomplete old code was not printing valid sense data and
leaving empty lines for invalid.
ian [Sun, 21 Apr 2019 17:39:01 +0000 (17:39 +0000)]
Move the reporting of spurious interrupts under bootverbose control, because
occasional spurious interrupts are a normal thing on this hardware. Also,
change the name of the cpu-local interrupt controller driver from local_intc
to lintc, because the name gets built into interrupt names, which have to
fit into a 19-byte field for stats reporting (so this allows 5 more bytes
of the actual interrupt name to be displayed).
Use a shadow buffer and never read from the frame buffer. Remove large slow
code for reading from the frame buffer.
Reading from the frame buffer is usually much slower than writing to
the frame buffer. Typically 10 to 100 times slower. It old modes,
it takes many more PIOs, and in newer modes with no PIOs writes are
often write-combined while reads remain uncached.
Reading from the frame buffer is not very common, so this change doesn't
give speedups of 10 to 100 times. My main test case is a floodfill()
function that reads about as many pixels as it writes. The speedups
are typically a factor of 2 to 4.
Duplicating writes to the shadow buffer is slower when no reads from the
frame buffer are done, but reads are often done for the pixels under the
mouse cursor, and doing these reads from the shadow buffer more than
compensates for the overhead of writing the shadow buffer in at least the
slower modes. Management of the mouse cursor also becomes simpler.
The shadow buffer doesn't take any extra memory, except twice as much
in old 4-plane modes. A buffer for holding a copy of the frame buffer
was allocated up front for use in the screen switching signal handler.
This wasn't changed when the handler was made async-signal safe. Use
the same buffer the shadow (but make it twice as large in the 4-plane
modes), and remove large special code for writing it as well as large
special code for reading ut. It used to have a rawer format in the
4-plane modes. Now it has a bitmap format which takes twice as much
memory but can be written almost as fast without special code.
VIDBUFs that are not the whole frame buffer were never supported, and the
change depends on this. Check for invalid VIDBUFs in some places and do
nothing. The removed code did something not so good.
adrian [Sun, 21 Apr 2019 02:36:01 +0000 (02:36 +0000)]
[ath] [ath_hal] [ath_hal_9300] Extend the start PCU receive to handle resetting ANI.
One of the fun issues with scanning has been how the existing
ANI values were programmed into the hardware when channels were
changed. If you're on a really crappy channel and ANI has made
you deaf then when you scan you continue to be deaf on all channels.
This code passes in a flag to startpcureceive which in AR5416 and later
is also used to enable ANI. This allows it to know if it's a normal
operation or a scan operation.
This fixes my situation at home where a temporary spot of a device
going deaf due to interference starts scanning and .. can't hear
anything until I restart.
Now, this isn't the full fix - ideally:
(a) all the ANI config and per-channel information would be migrated
to the shared HAL stuff and enabled for all of the NICs;
(b) when a station reassociates and some other error conditions
(like missed beacons, NF calibration failures, etc) a knob
to reset ANI parameters would likely help recovery.
psm(4): respect tap_disabled configuration with enabled Extended support
This fixes a bug where, even when hw.psm.tap_enabled=0, touchpad taps
were processed.
tap_enabled has three states: unconfigured, disabled, and enabled (-1, 0, 1).
To respect PR kern/139272, taps are ignored only when explicity disabled.
Make libvgl mostly work without superuser privilege in direct modes by
not doing any unnecessary PIO instructions or refusing to start when the
i/o privilege needed for these instructions cannot be acquired.
This turns off useless palette management in direct modes. Palette
management had no useful effect since the hardware palette is not used
in these modes.
This transiently acquires i/o privilege if possible as needed to give
VGLSetBorder() and VGLBlankDisplay() a chance of working. Neither has
much chance of working. I was going to drop support for them in direct
modes, but found that VGLBlankDisplay() still works with an old graphics
card on a not so old LCD monitor.
This has some good side effects: reduce glitches for managing the palette
for screen switches, and speed up and reduce async-signal-unsafeness in
mouse cursor drawing.
Replace hard tabs with four-character indentations, per PEP8.
This is being done to separate stylistic changes from the tests from functional
ones, as I accidentally introduced a bug to the tests when I used four-space
indentation locally.
Use symlinks for kernel modules rather than hardlinks
When aliasing a kernel module to a different name (ie if_igb for if_em),
it's better to use symlinks than hard links. kldxref will omit entries for
the links, ensuring that the loaded module has the correct name.
Reviewed by: imp
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D19979
There's a number of EFI_ZFS_BOOT #ifdefs that aren't needed, or can be
eliminated with some trivial #defines. Remove the EFI_ZFS_BOOT ifdefs
that aren't needed. Replace libzfs.h include which is not safe to
include without EFI_ZFS_BOOT with efizfs.h which is and now
conditionally included libzfs.h. Define efizfs_set_preferred away
and define efi_zfs_probe to NULL when ZFS is compiled out.
myjob will get loaded at the next second==0, but this echo job will not
run until cron restarts. These jobs are normally handled in
run_reboot_jobs(), which sets e->lastexit of INTERVAL jobs to the startup
time so they run 'n' seconds later.
Fix this by special-casing TargetTime > 0 in the database load. Preexisting
jobs will be handled at startup during run_reboot_jobs as normal, but if
we've reloaded a database during runtime we'll hit this case and set
e->lastexit to the current time when we process it. They will then run every
'n' seconds from that point, and a full restart of cron is no longer
required to make these jobs work.
Reported by: Juraj Lutter (otis_sk.freebsd.org)
Reviewed by: allanjude, bapt, bjk (earlier version), Juraj Lutter
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D19924
Since writes don't necessarily need to be on erase-block boundaries, we can
relax the block size and alignments down to sector size. If it needs to be
erased, opalflash_erase() will check proper alignment and size.
Add support for the ModeSetMasked attribute to the NFSv4.1 server.
I do not know of an extant NFSv4.1 client that currently does a Setattr
operation for the ModeSetMasked, but it has been discussed on the linux-nfs
mailing list.
This patch adds support for doing a Setattr of ModeSetMasked, so that it
will work for any future NFSv4.1 client that chooses to do so.
Tested via a hacked FreeBSD NFSv4.1 client.
Replace "vp" with NULL to make the code more readable.
At the time of this nfsv4_sattr() call, "vp == NULL", so this patch doesn't
change the semantics, but I think it makes the code more readable.
It also makes it consistent with the nfsv4_sattr() call a few lines above
this one. Found during code inspection.
Fix copying of overlapping bitmaps. The cases of copying within the
screen bitmap and within a single MEMBUF were broken when first source
line is before the first destination line and the sub-bitmaps overlap.
The fix just copies horizontal lines in reverse order when the first
source line is before the first destination line. This switches
directions unnecessarily in some cases, but the switch is about as
fast as doing a precise detection of overlaps. When the first lines
are the same, there can be undetected overlap in the horizontal
direction. The old code already handles this mostly accidentally by
using bcopy() for MEMBUFs and by copying through a temporary buffer
for the screen bitmap although the latter is sub-optimal in direct
modes.
cem [Fri, 19 Apr 2019 20:08:45 +0000 (20:08 +0000)]
kernel build: Disable unhelpful GCC warning (tripped after r346352)
-Wformat-zero-length does not highlight any particularly wrong code and it
is especially meaningless for device_printf(). Turn it off entirely to
remove a source of false positives.
cem [Fri, 19 Apr 2019 20:05:47 +0000 (20:05 +0000)]
libkern: Bring in arc4random_uniform(9) from libc
It is a useful arc4random wrapper in the kernel for much the same reasons as
in userspace. Move the source to libkern (because kernel build is
restricted to sys/, but userspace can include any file it likes) and build
kernel and libc versions from the same source file.
Copy the documentation from arc4random_uniform(3) to the section 9 page.
While here, add missing arc4random_buf(9) symlink.
Add wrapper functions to convert strings to EFI_DEVICE_PATH
In anticipation of new functionality, create routines to convert char *
and a CHAR16 * to a EFI_DEVICE_PATH
EFI_DEVICE_PATH *efi_name_to_devpath(const char *path);
EFI_DEVICE_PATH *efi_name_to_devpath16(CHAR16 *path);
void efi_devpath_free(EFI_DEVICE_PATH *dp);
The first two return an EFI_DEVICE_PATH for the passed in paths. The
third frees up the storage the first two return when the caller is
done with it.
Add UEFI definitions related to converting string to DEVICE_PATH
Add definitions from UEFI 2.7 Errata B standards doc for converting a
text string to a device path. Added clearly missing 'e' at the end of
Device to resolve mismatch in that document in
EFI_DEVICE_PATH_FROM_TEXT_PROTOCOL element names.
When an IPv6 packet is received for a raw socket which has the
IPPROTO_IPV6 level socket option IPV6_CHECKSUM enabled and the
checksum check fails, drop the message. Without this fix, an
ICMP6 message was sent indicating a parameter problem.
Thanks to bz@ for suggesting a way to simplify this fix.
When a checksum has to be computed for a received IPv6 packet because it
is requested by the application using the IPPROTO_IPV6 level socket option
IPV6_CHECKSUM on a raw socket, ensure that the packet contains enough
bytes to contain the checksum at the specified offset.
Avoid a buffer overwrite in rip6_output() when computing the checksum
as requested by the user via the IPPROTO_IPV6 level socket option
IPV6_CHECKSUM. The check if there are enough bytes in the packet to
store the checksum at the requested offset was wrong by 1.
Add a stat counter to track ipv6 atomic fragments. Atomic fragments can be
generated in response to invalid path MTU values, but are also a potential
attack vector and considered harmful (see RFC6946 and RFC8021).
While here add tracking of the atomic fragment counter to netstat and systat.
I believe previous ifdef caused NULL dereference in later zfs_log_create()
on attempt to create file inside directory belonging to ephemeral group
created on illumos, trying to write to log information about GID domain
of the newly created file, inheriting the ephemeral GID.
This patch reuses original illumos SGID code with exception that due to
lack of ID mapping code on FreeBSD ephemeral GID will turn into GID_NOBODY
by another ifdef inside zfs_fuid_map_id().
We cannot just assume that any name which ends with a letter is a group
That's not been true since we allowed renaming of network interfaces. It's also
not true for things like epair0a.
Try to retrieve the group members for the name to check, since we'll get ENOENT
if the group doesn't exist.
Fix the NFSv4.0 server so that it does not support NFSv4.1 attributes.
During inspection of a packet trace, I noticed that an NFSv4.0 mount
reported that it supported attributes that are only defined for NFSv4.1.
In practice, this bug appears to be benign, since NFSv4.0 clients will
not use attributes that were added for NFSv4.1.
However, this was not correct and this patch fixes the NFSv4.0 server
so that it only supports attributes defined for NFSv4.0.
It also adds a definition for NFSv4.1 attributes that can only be set,
although it is only defined as 0 for now.
This is anticipation of the addition of support for the NFSv4.1 mode+mask
attribute soon.
powerpc/powernv: Make erasing before writes optional
If the OPAL flash driver supports writing without erase, it adds a
'no-erase' property to the flash device node. Honor that property and don't
bother erasing if it exists.
The inp lock is not needed for testing the V6 flag as that flag is set
once when the inp is created and never changes. For non-TCP socket
options the lock is immediately dropped after checking that flag.
This just pushes the lock down to only be acquired for TCP socket
options.
This isn't a hot-path, more a cosmetic cleanup I noticed while reading
the code.
cem [Thu, 18 Apr 2019 20:48:54 +0000 (20:48 +0000)]
random(4): Restore availability tradeoff prior to r346250
As discussed in that commit message, it is a dangerous default. But the
safe default causes enough pain on a variety of platforms that for now,
restore the prior default.
Some of this is self-induced pain we should/could do better about; for
example, programmatic CI systems and VM managers should introduce entropy
from the host for individual VM instances. This is considered a future work
item.
On modern x86 and Power9 systems, this may be wholly unnecessary after
D19928 lands (even in the non-ideal case where early /boot/entropy is
unavailable), because they have fast hardware random sources available early
in boot. But D19928 is not yet landed and we have a host of architectures
which do not provide fast random sources.
This change adds several tunables and diagnostic sysctls, documented
thoroughly in UPDATING and sys/dev/random/random_infra.c.
Implement flag for telling cuse(3) clients if the peer is running in 32-bit
compat mode or not. This is useful when implementing compatibility ioctl(2)
handlers in userspace.
Add note that I'm the defacto maintainer of libegacy, our
compat shims for building bootstrap tools that use new features
on systems too old to have those new features. The world view
for this part of the build is unique to the whole build process
and continuty of design for new compat shims help this library
remain viable.
Correct handling of RMRR during early enumeration stages.
On some machines, DMAR contexts must be created before all devices
under the scope of the corresponding DMAR unit are enumerated.
Current code has two problems with that:
- scope lookup returns NULL device_t, which causes to skip creating a
context with RMRR, which is fatal for the affected device.
- calculation of the final pci dbsf address fails if any bridge in the
scope is not yet enumerated, because code relies on pcib_get_bus().
Make creation of contexts work either with device_t, or with DMAR PCI
scope paths. Scope provides enough information to infer context
address, and it is directly matched against DMAR tables scopes.
When calculating bus addresses for the scope or device, use direct
pci_cfgregread(PCIR_SECBUS_1) to get the secondary bus number, instead
of pcib_get_bus().
The issue was observed on HP Gen servers, where iLO PCI devices are
located behind south bridge switch. Turning on translation without
satisfying RMRR requests caused iLO to mostly hang, up to the level of
being unusable to control the server.
While there, remove hw.dmar.dmar_match_verbose tunable, and make the
normal logging under bootverbose useful and sufficient to diagnose
DRHD and RMRR parsing and matching.
FreeBSD does not set the pid field in the pfloghdr struct. This field is
populated on other platforms, document this to save people from trying
to use this field.
As an interim measure until a more permanent solution is implemented
workaround the following error:
/usr/src/contrib/elftoolchain/strings/strings.c:198:55: error: use of
undeclared identifier
'FA_OPEN' fa = fileargs_init(argc, argv, O_RDONLY, 0, &rights, FA_OPEN);
manu [Wed, 17 Apr 2019 21:45:19 +0000 (21:45 +0000)]
arm: allwinner: Fix audio for Allwinner H3/H5
Due to three conditions the codec driver for Allwinner A10/A20 and H3/H5 did not work properly here:
Wrong bit position for the analog audio reset
Hardware Reset of codec was not de-asserted correctly
Linux DTS file did not contain the address of the analog register the way as the driver was expecting it.