Kyle Evans [Wed, 22 May 2019 22:55:27 +0000 (22:55 +0000)]
MFC r347640: libbe(3): Descend into children of datasets w/ mountpoint=none
These datasets will generally be canmount=noauto,mountpoint=none (e.g.
zroot/var) but have children that may need to be mounted. Instead of
skipping that segment for no good reason, descend.
Kyle Evans [Wed, 22 May 2019 22:34:35 +0000 (22:34 +0000)]
MFC r347578: tun/tap: Defer clearing if_softc until after if_detach
(Commit massaged to match stable structure; tun and tap have been merged in
head)
r346670 added an sx to close a race between the ifioctl handler and
interface destruction. Unfortunately, it clears if_softc immediately after
the interface is closed, but before if_detach has been invoked.
Any time before detachment, an interface that's part of a bridge may still
receive traffic that's pushed through tunstart/tunstart_l2 and promptly
lead to a panic because if_softc is now NULL.
Fix it by deferring the clearing of if_softc until after the interface has
detached and thus been removed from the bridge. if_softc still gets cleared
in case another thread has already entered the ioctl handler before it's
replaced with ifdead_ioctl.
Dimitry Andric [Wed, 22 May 2019 17:42:22 +0000 (17:42 +0000)]
MFC r347978:
Fix OptionalObsoleteFiles copy/paste mistake from r345236, which
connected libomp to the build. The comparison should not have been
against ${MK_OPENSSH}, but against ${MK_OPENMP}, obviously.
MFC r347979:
To avoid unnecessarily modifying ports, add a -lgomp symlink, since GCC
does not ship a -lomp symlink. Also update OptionalObsoleteFiles for
this, and add 32-bit variants while here.
Dmitry Chagin [Wed, 22 May 2019 05:32:39 +0000 (05:32 +0000)]
MFC r347052:
In order to reduce duplication between MD parts of the Linuxulator
move bits that are MI out into the headers in compat/linux.
For that remove bogus _packed attribute from struct l_sockaddr
and use MI types for struct members.
And continue to move into the linux_common module a code that is
intended for both Linuxulator modules (both instruction set - 32 & 64 bit)
or for external modules like linsysfs or linprocfs.
To avoid header pollution introduce new sys/compat/linux_common.h header.
Brooks Davis [Tue, 21 May 2019 16:36:28 +0000 (16:36 +0000)]
Revert r348012, MFC r347963.
Several of the changes touch actual defaults. These defaults are all
mistakes and no one should rely on them, but changing them in a stable
branch is clearly inappropriate.
Alexander Motin [Fri, 17 May 2019 16:41:18 +0000 (16:41 +0000)]
MFC r346390: Change the way FreeBSD GID inheritance is hacked.
I believe previous ifdef caused NULL dereference in later zfs_log_create()
on attempt to create file inside directory belonging to ephemeral group
created on illumos, trying to write to log information about GID domain
of the newly created file, inheriting the ephemeral GID.
This patch reuses original illumos SGID code with exception that due to
lack of ID mapping code on FreeBSD ephemeral GID will turn into GID_NOBODY
by another ifdef inside zfs_fuid_map_id().
Kenneth D. Merry [Fri, 17 May 2019 14:29:56 +0000 (14:29 +0000)]
MFC r345008:
------------------------------------------------------------------------
r345008 | ken | 2019-03-11 10:21:14 -0400 (Mon, 11 Mar 2019) | 59 lines
Fix CRN resets in the isp(4) driver in certain situations.
The Command Reference Number (CRN) is part of the FC-Tape features
that we enable when talking to tape drives. It starts at 1, and
goes to 255 and wraps around to 1. There are a number of reset
type conditions that result in the CRN getting reset to 1. These
are detailed in section 4.10 (table 8) of the FCP-4r02b specification.
One of the conditions is when a PRLI (Process Login) is sent by
the initiator, and the Establish Image Pair bit is set in Word 0
of the PRLI.
Previously, the isp(4) driver core sent a notification via
isp_async() that the target had changed or stayed in place, but
there was no indication of whether a PRLI was sent and whether the
Establish Image Pair bit was set.
The result of this was that in some situations, notably
switching back and forth between a direct connection and a switch
connection to a tape drive, the isp(4) driver would fail to reset
the CRN in situations that require it according to the spec. When
the CRN isn't reset in a situation that requires it, the tape drive
then rejects every subsequent command that is sent to the drive.
It is assuming that the commands are being sent out of order.
So, modify the isp(4) driver to include Word 0 of the PRLI command
when it sends isp_async() notifications of target changes. Look at
the Establish Image Pair bit, and reset the CRN if that bit is set.
With this change, I am able to switch a tape drive back and forth
between a direct connection and a switch connection, and the isp(4)
driver resets the CRN when it should.
sys/dev/isp_stds.h:
Add bit definitions for PRLI Word 0.
sys/dev/ispmbox.h:
Add PRLI Word 0 to the port database type, isp_pdb_t.
sys/dev/ispvar.h
Add PRLI Word 0 to fcportdb_t.
sys/dev/isp.c:
Populate the new prli_word0 parameter in the port database.
In isp_pdb_add_update(), add a check to see if the
Establish Image Pair bit is set in PRLI Word 0. If it is,
then that is an additional reason to create a change
notification.
sys/dev/isp_freebsd.c:
In isp_async(), if the device changed or stayed, look at
PRLI Word 0 to see if the Establish Image Pair bit is set.
If it is, reset the CRN if we haven't already.
Michael Tuexen [Fri, 17 May 2019 08:19:43 +0000 (08:19 +0000)]
MFC r347233:
Remove non-functional SCTP checksum offload support for virtio.
Checksum offloading for SCTP is not currently specified for virtio.
If the hypervisor announces checksum offloading support, it means TCP
and UDP checksum offload. If an SCTP packet is sent and the host announced
checksum offload support, the hypervisor inserts the IP checksum (16-bit)
at the correct offset, but this is not the right checksum, which is a CRC32c.
This results in all outgoing packets having the wrong checksum and therefore
breaking SCTP based communications.
This patch removes SCTP checksum offloading support from the virtio
network interface.
Thanks to Felix Weinrank for making me aware of the issue.
MFC r347324:
Make command workqueue persistant in mlx5core.
There is no reason to re-create the command workqueue during healthcare.
This also fixes an issue where a previous work struct may refer to a
destroyed workqueue.
MFC r347323:
Fix race between driver unload and dumping firmware in mlx5core.
Present code uses lock-less accesses to the dump data to prevent top
level ioctls from blocking bottom-level call to dump. Unfortunately, this
depends on the type stability of the dump data structure, which makes it
non-functional during driver teardown.
Switch to the mutex locking scheme where top levels use the mutex in the
bound regions, while copyouts and drain for completion utilize condvars.
The mutex lifetime is guaranteed to be strictly larger than the time
interval where driver can initiate dump, and most of the control fields
of the old struct mlx5_dump_data are directly embedded into struct
mlx5_core_dev.
MFC r347319:
Flush command workqueue when command completion is triggered in mlx5core.
Avoid race for command completion when triggering a command completions event.
Serialize operation by queueing all commands on the same work queue.
This can happen when healthcare triggers.
MFC r347318:
Make command timeout way shorter in mlx5core.
The command timeout is terribly long, whole two hours. Make it 60s so if
things do go wrong, the user gets feedback in relatively short time, so
they can take corrective actions and/or investigate using tools and such.
MFC r347308:
Extend the counters framework in mlx5en(4).
Allow more macro arguments and split the variable type and name into
separate arguments. This allows simple and powerful copy and extraction
of values from IFC based structures into SYSCTLs with the use of a single
macro.
MFC r347306:
Implement reading PCI power status in mlx5core.
Implement a watchdog as part of the healtcare subsystem which
reads the PCI power status during startup and upon the PCI
power status change event and store it into the core device
structure. This value is then exported to user-space via a
read-only SYSCTL. A dmesg print has been added to inform
the admin about the PCI power status.
MFC r347304:
Always return success for RoCE modify port in mlx5ib.
CM layer calls ib_modify_port() regardless of the link layer.
For the Ethernet ports, qkey violation and Port capabilities
are meaningless. Therefore, always return success for ib_modify_port
calls on the Ethernet ports.
MFC r347296:
Correct check for the calibration generation in mlx5en(4).
If generation is cleared due to hardware clock failure, check for it before
the divisor is used. Actually clear generation when failure occurs.
While there, stop doing the calculations inside the generation loop. Since
all members of mlx5e_clbr_point are used for calculations, get the
local copy of the structure and use it after generation stabilized.
MFC r347293:
Use software counters for rx_packets and rx_bytes in mlx5en(4).
The physical- and virtual- port counters might not reflect the amount
of data received after address filtering. Use the software counters
instead for rx_packets and rx_bytes to know exactly how much data
was received.
MFC r347279:
Fix netstat counters mapping in mlx5en(4).
The current mapping of driver counters to netstat counters is wrong.
For example, a single jabber packet, will cause the Ierrs counter to
count three times.
The work for mapping the hardware and software counters to their right
place in netstat counters were already done in Linux, take that as is
to the FreeBSD driver.
ib_req_notify_cq may return negative value which will indicate a
failure. In the case of uncorrectable error, we will end up in an
endless loop. Fix that, by going to another loop with poll_more
only if there is anything left to poll.
MFC r347272:
Query and cache PCAM, MCAM registers on initialization in mlx5core.
On load_one, we now cache our capabilities registers internally, similar
to QUERY_HCA_CAP. Capabilities can later be queried using macros
introduced in this patch.
MFC r347271:
Implement PCAM, MCAM access register commands in mlx5core.
Introduced registers will expose capabilities of new registers and
features related to port/management.
Driver will query MCAM and PCAM in order to avoid failing on old
firmwares with lack of support.
PCAM and MCAM registers will provide information regarding firmware
support for different features, in order to avoid cases where new driver
combined with old firmware results in syndromes (for ex. PCIe counters
before this patchset).
MFC r347268:
Add Fast teardown support to mlx5core.
Today mlx5 devices support two teardown modes:
1- Regular teardown
2- Force teardown
This change introduces the enhanced version of the "Force teardown" that
allows SW to perform teardown in a faster way without the need to reclaim
all the pages.
Fast teardown provides the following advantages:
1- Fix a FW race condition that could cause command timeout
2- Avoid moving to polling mode
3- Close the vport to prevent PCI ACK to be sent without been
scattered to memory
projects / FreeBSD / FreeBSD.git / log