glebius [Wed, 2 Dec 2009 13:24:21 +0000 (13:24 +0000)]
Until this moment carp(4) used a strange logging priority. It used debug
priority for such important information as MASTER/BACKUP state change,
and used a normal logging priority for such innocent messages as receiving
short packet (which is a normal VRRP packet between some other routers) or
receving a CARP packet on non-carp interface (someone else running CARP).
This commit shifts message logging priorities to a more sane default.
luigi [Wed, 2 Dec 2009 08:52:06 +0000 (08:52 +0000)]
change the type of the opcode from enum *:8 to u_int8_t
so the size and alignment of the ipfw_insn is not compiler dependent.
No changes in the code generated by gcc.
There was only one instance of this kind in our entire source tree,
so i suspect the old definition was a poor choice (which i made).
Don't allocate an input buffer for a TTY when the receiver is turned off.
When the termios CREAD flag is not set, it makes little sense to
allocate an input buffer. Just set the size to 0 in this case to reduce
memory footprint.
Disallow CREAD to be disabled for pseudo-devices to prevent
foot-shooting.
gibbs [Tue, 1 Dec 2009 17:29:25 +0000 (17:29 +0000)]
Add media ioctl support and link notifications so that devd will attempt
to run dhclient on a netfront (xn) device that is setup for DHCP in
/etc/rc.conf.
PR: kern/136251 (fixed differently than the submitted patch)
keramida [Tue, 1 Dec 2009 06:12:31 +0000 (06:12 +0000)]
Describe what setpgid(2) does when pgid=0. The text has been
copied from NetBSD's manpage, and it also matches the behavior
described by the Open Group's online copy of setpgid.2 at
http://www.opengroup.org/onlinepubs/009695399/functions/setpgid.html
green [Tue, 1 Dec 2009 05:04:31 +0000 (05:04 +0000)]
Do not gratuitously fail *env(3) operations due to corrupt ('='-less)
**environ entries. This puts non-getenv(3) operations in line with
getenv(3) in that bad environ entries do not cause all operations to
fail. There is still some inconsistency in that getenv(3) in the
absence of any environment-modifying operation does not emit corrupt
environ entry warnings.
I also fixed another inconsistency in getenv(3) where updating the
global environ pointer would not be reflected in the return values.
It would have taken an intermediary setenv(3)/putenv(3)/unsetenv(3)
in order to see the change.
jhb [Mon, 30 Nov 2009 21:03:44 +0000 (21:03 +0000)]
Remove extra parantheses from usb_ethernet.c and usb_serial.c lines.
config(8) doesn't parse parantheses and instead treated them as being
part of the device driver name (e.g. '(u3g' vs 'u3g'). While here, fix the
style of these long lines to match the wrapping used for other long lines
in this file.
avg [Mon, 30 Nov 2009 11:44:03 +0000 (11:44 +0000)]
amdsbwd: new driver for AMD SB600/SB7xx watchdog timer
The hardware is compliant with WDRT specification, so I originally
considered including generic WDRT watchdog support, but decided
against it, because I couldn't find anyone to the code for me.
WDRT seems to be not very popular.
Besides, generic WDRT porbably requires a slightly different driver
approach.
dougb [Mon, 30 Nov 2009 03:38:34 +0000 (03:38 +0000)]
Update to BIND 9.6.1-P2. The vulnerability this is designed to fix is
related to DNSSEC validation on a resolving name server that allows
access to untrusted users. If your system does not fall into all 3 of
these categories you do not need to update immediately.
jilles [Sun, 29 Nov 2009 22:33:59 +0000 (22:33 +0000)]
Fix some cases where file descriptors from redirections leak to programs.
- Redirecting fds that were not open before kept two copies of the
redirected file.
sh -c '{ :; } 7>/dev/null; fstat -p $$; true'
(both fd 7 and 10 remained open)
- File descriptors used to restore things after redirection were not
set close-on-exec, instead they were explicitly closed before executing
a program normally and before executing a shell procedure. The latter
must remain but the former is replaced by close-on-exec.
sh -c 'exec 7</; { exec fstat -p $$; } 7>/dev/null; true'
(fd 10 remained open)
The examples above are simpler than the testsuite because I do not want to
use fstat or procstat in the testsuite.
nwhitehorn [Sun, 29 Nov 2009 20:48:19 +0000 (20:48 +0000)]
Early-generation touchpads do not send periodic calibration frames for
baseline subtraction, and are very temperature sensitive, so would slowly
drift out of a calibrated state when under load. Escape this by taking
the last frame before we decide that the pad is idle as a finger-free
baseline.
marcel [Sun, 29 Nov 2009 20:17:50 +0000 (20:17 +0000)]
Move the sysctl related fields to the end of the structure and
make them conditional upon _KERNEL. libkvm includes <sys/pcpu.h>
and <sys/sysctl.h> does not expose the structure definitions to
userland.
bz [Sun, 29 Nov 2009 17:53:57 +0000 (17:53 +0000)]
In case the compression result is the same size as the orignal version,
the compression was useless as well. Make sure to not update the data
and return, else we would waste resources when decompressing.
This also avoids the copyback() changing data other consumers like
xform_ipcomp.c would have ignored because of no win and sent out without
noting that compression was used, resulting in invalid packets at the
receiver.
bz [Sun, 29 Nov 2009 10:53:34 +0000 (10:53 +0000)]
Only add the IPcomp header if crypto reported success and we have a lower
payload size. Before we had always added the header, no matter if we
actually send out compressed data or not.
With this, after the opencrypto/deflate changes, IPcomp starts to work
apart from edge cases. Leave it disabled by default until those are
fixed as well.
ed [Sat, 28 Nov 2009 23:50:48 +0000 (23:50 +0000)]
Decompose <sys/termios.h>.
The <sys/termios.h> header file is hardlinked to <termios.h>. It
contains both the structures and the flag definitions, but also the C
library interface that's implemented by the C library.
This header file has the typical problem of including too many random
things and being badly ordered. Instead of trying to fix this, decompose
it into two header files:
- <sys/_termios.h>, which contains struct termios and the flags.
- <termios.h>, which includes <sys/_termios.h> and contains the C
library interface.
This means userspace has to include <termios.h> for struct termios,
while kernelspace code has to include <sys/tty.h>. Also add a
<sys/termios.h>, which prints a warning message before including
<termios.h>. I am aware that there are some applications that use this
header file as well.
bz [Sat, 28 Nov 2009 21:08:19 +0000 (21:08 +0000)]
Change memory managment from a fixed size array to a list.
This is needed to avoid running into out of buffer situations
where we cannot alloc a new buffer because we hit the array size
limit (ZBUF).
Use a combined allocation for the struct and the actual data buffer
to not increase the number of malloc calls. [1]
Defer initialization of zbuf until we actually need it.
Make sure the output buffer will be large enough in all cases.
marcel [Sat, 28 Nov 2009 21:01:15 +0000 (21:01 +0000)]
Eliminate teh use of MAXCPU in static arrays of interrupt counters by
adding statistics counters to the PCPU structure. Export the counters
through sysctl by giving each PCPU structure its own sysctl context.
While here, fix cnt.v_intr by not just having it count clock interrupts,
but every interrupt and add more counters for each interrupt source.
bz [Sat, 28 Nov 2009 17:44:57 +0000 (17:44 +0000)]
Z_PARTIAL_FLUSH is marked deprecated. Z_SYNC_FLUSH is the suggested
replacement but only use it for inflate. For deflate use Z_FINISH
as Z_SYNC_FLUSH adds a trailing marker in some cases that inflate(),
despite the comment in zlib, does npt seem to cope well with, resulting
in errors when uncompressing exactly fills the outbut buffer without
a Z_STREAM_END and a successive call returns an error.
nwhitehorn [Sat, 28 Nov 2009 17:33:19 +0000 (17:33 +0000)]
Add a CPU features framework on PowerPC and simplify CPU setup a little
more. This provides three new sysctls to user space:
hw.cpu_features - A bitmask of available CPU features
hw.floatingpoint - Whether or not there is hardware FP support
hw.altivec - Whether or not Altivec is available
ed [Sat, 28 Nov 2009 16:30:06 +0000 (16:30 +0000)]
Include <sys/tty.h> instead of <sys/termios.h>.
Right now <sys/termios.h> includes <sys/ttycom.h>, which provides the
TTY ioctls to the svr4 code. We need both struct termios and the ioctls,
so include <sys/tty.h> for now.
kib [Sat, 28 Nov 2009 14:29:32 +0000 (14:29 +0000)]
Allow to load not-openable dso when tracing. This fixes ldd on such dso or
dso linked to non-openable object.
Remove '\n' at the end of error message.
End comments with dot.
trasz [Sat, 28 Nov 2009 11:57:43 +0000 (11:57 +0000)]
Provide a set of sysctls and tunables to disable device node creation
for specific "kinds" of disk labels - for example, GPT UUIDs. Reason
for this is that sometimes, other GEOM classes attach to these device
nodes instead of the proper ones - e.g. they attach to /dev/gptid/XXX
instead of /dev/ada0p2, which is annoying.
alc [Fri, 27 Nov 2009 22:08:29 +0000 (22:08 +0000)]
Support the new VM_PROT_COPY option on wired pages. The effect of which
is that a debugger can now set a breakpoint in a program that uses mlock(2)
on its text segment or mlockall(2) on its entire address space.
alc [Fri, 27 Nov 2009 20:24:11 +0000 (20:24 +0000)]
Simplify the invocation of vm_fault(). Specifically, eliminate the flag
VM_FAULT_DIRTY. The information provided by this flag can be trivially
inferred by vm_fault().
fanf [Fri, 27 Nov 2009 17:53:49 +0000 (17:53 +0000)]
unifdef: fix invalid array access when nesting limit exceeded
If the number of nested #if blocks exceeds 64, nest() increments
the nesting depth and then reports an error. The message includes
the line number for the start of the current #if block, which is
read from past the end of the relevant array.
Avoid the out-of-bounds read by reporting the error and exiting
before the nesting depth has a chance to increase.
Submitted by: Jonathan Nieder <jrnieder@gmail.com>
ed [Fri, 27 Nov 2009 13:05:14 +0000 (13:05 +0000)]
Properly use the envp argument in execvPe().
execvPe() is called by _execvpe(), which we added to implement
posix_spawnp(). We just took execvP() and added the envp argument.
Unfortunately we forgot to change the implementation to use envp over
environ.
sobomax [Fri, 27 Nov 2009 03:55:42 +0000 (03:55 +0000)]
Add new loader console type: "spinconsole". This console selects the
video console which doesn't take any input from keyboard and hides
all output replacing it with ``spinning'' character (useful for
embedded products and custom installations).
jh [Thu, 26 Nov 2009 19:11:44 +0000 (19:11 +0000)]
Reset path name back to original correctly in fts_build() when
FTS_NOCHDIR option is used. fts_build() could strip a trailing slash
from path name in post-order visit if a path pointing to an empty
directory was given for fts_open().
fanf [Thu, 26 Nov 2009 19:08:33 +0000 (19:08 +0000)]
unifdefall: optimise the loop that builds the unifdef command.
The old code used a shell loop to convert each controlling macro
definition into a command-line argument, reading the macro definitions
file each time. The new code converts the list of controlling macros
into a sed script which can run through the list of macro definitions
in one go.
Add some explanatory comments, since the code is quite meta.
Use {} instead of () for redirecting a group of commands.
Submitted by: Jonathan Nieder <jrnieder@gmail.com>
kib [Thu, 26 Nov 2009 13:49:37 +0000 (13:49 +0000)]
Implement sighold, sigignore, sigpause, sigrelse, sigset functions
from SUSv4 XSI. Note that the functions are obsoleted, and only
provided to ease porting from System V-like systems. Since sigpause
already exists in compat with different interface, XSI sigpause is
named xsi_sigpause.
mav [Thu, 26 Nov 2009 12:41:43 +0000 (12:41 +0000)]
Drop USB mass storage devices support from ata(4). It is out of the build as
long as I remember, and completely superseded by better maintained umass(4).
It's main idea was to optionally avoid CAM dependency for such devices, but
with move ATA to CAM, it is not actual any more.
alc [Thu, 26 Nov 2009 05:16:07 +0000 (05:16 +0000)]
Replace VM_PROT_OVERRIDE_WRITE by VM_PROT_COPY. VM_PROT_OVERRIDE_WRITE has
represented a write access that is allowed to override write protection.
Until now, VM_PROT_OVERRIDE_WRITE has been used to write breakpoints into
text pages. Text pages are not just write protected but they are also
copy-on-write. VM_PROT_OVERRIDE_WRITE overrides the write protection on the
text page and triggers the replication of the page so that the breakpoint
will be written to a private copy. However, here is where things become
confused. It is the debugger, not the process being debugged that requires
write access to the copied page. Nonetheless, the copied page is being
mapped into the process with write access enabled. In other words, once the
debugger sets a breakpoint within a text page, the program can write to its
private copy of that text page. Whereas prior to setting the breakpoint, a
SIGSEGV would have occurred upon a write access. VM_PROT_COPY addresses
this problem. The combination of VM_PROT_READ and VM_PROT_COPY forces the
replication of a copy-on-write page even though the access is only for read.
Moreover, the replicated page is only mapped into the process with read
access, and not write access.
thompsa [Thu, 26 Nov 2009 00:43:17 +0000 (00:43 +0000)]
Remove overuse of exclamation marks in kernel printfs, there mere fact a
message has been printed is enough to get someones attention. Also remove the
line number for DPRINTF/DPRINTFN, it already prints the funtion name and a
unique message.
fanf [Thu, 26 Nov 2009 00:38:13 +0000 (00:38 +0000)]
Fix a performance bug in factor(6).
Check if large factor is prime before applying Pollard's algorithm;
fixes "factor 2147483647111311". Increase base if p-1 algorithm
reaches 1; fixes "factor 99999999999991".
Testcases from David A Bagley <bagleyd@tux.org>.
Fixes from Joseph Myers <jsm@NetBSD.org>.
Problem rediscovered by an attempt to factor my phone number.
A few other incidental fixes: correct a couple of factually incorrect
comments; use ident string macros; move from 4-clause to 3-clause
BSD licence (University of California copyright).
thompsa [Wed, 25 Nov 2009 20:50:43 +0000 (20:50 +0000)]
Disable interrupts after doing early takeover of the usb controller in case usb
isnt actually compiled in (or kldloaded) as the controller could cause spurious
interrupts.
fanf [Wed, 25 Nov 2009 20:23:18 +0000 (20:23 +0000)]
Update unifdef to my upstream version 1.188
Main highlights:
(A) The new -B option compresses blank lines around a deleted section
so that blank lines around "paragraphs" of code don't get doubled.
(B) Lenient evaluation of && and || so that #if expressions can be
evaluated even when some of their sub-expressions cannot be.
(C) The evaluator can now handle macros with arguments.
(D) Portability fixes, especially for unifdefall.
Contributions from:
Ben Hutchings at Solarflare Communications (A and B)
Anders H Kaseorg <andersk@mit.edu> (A and C)
Jonathan Nieder <jrnieder@gmail.com> (D)