alc [Thu, 6 May 2010 16:39:43 +0000 (16:39 +0000)]
Push down the page queues lock inside of vm_page_free_toq() and
pmap_page_is_mapped() in preparation for removing page queues locking
around calls to vm_page_free(). Setting aside the assertion that calls
pmap_page_is_mapped(), vm_page_free_toq() now acquires and holds the page
queues lock just long enough to actually add or remove the page from the
paging queues.
Update vm_page_unhold() to reflect the above change.
alc [Thu, 6 May 2010 15:52:08 +0000 (15:52 +0000)]
Eliminate a small bit of unneeded code from kern_sendfile(): While
kern_sendfile() is running, the file's vm object can't be destroyed
because kern_sendfile() increments the vm object's reference count. (Once
kern_sendfile() decrements the reference count and returns, the vm object
can, however, be destroyed. So, sf_buf_mext() must handle the case where
the vm object is destroyed.)
kib [Thu, 6 May 2010 04:57:33 +0000 (04:57 +0000)]
Add a helper function vm_pageout_page_lock(), similar to tegge'
vm_pageout_fallback_object_lock(), to obtain the page lock
while having page queue lock locked, and still maintain the
page position in a queue.
Use the helper to lock the page in the pageout daemon and contig launder
iterators instead of skipping the page if its lock is contested.
Skipping locked pages easily causes pagedaemon or launder to not make a
progress with page cleaning.
rmacklem [Thu, 6 May 2010 00:24:08 +0000 (00:24 +0000)]
If the "-alldirs" export option was used for the V4: line, mountd
would crash in check_options() since dp == NULL for the V4: line.
This patch moves the check for options allowed on the V4: line to
ahead of where dp is used to avoid this crash.
Reported by: mamalos AT eng.auth.gr
MFC after: 1 week
marius [Wed, 5 May 2010 22:15:20 +0000 (22:15 +0000)]
- Fix broken symlinks on cross platform zfs send/recv. [1]
- Enable zfs_ace_byteswap() on FreeBSD as it works just fine (tested between
amd64 and sparc64 in both directions by Michael Moll).
PR: 146272
Approved by: mm, pjd
Obtained from: OpenSolaris (onnv rev. 8283:1ca59f393041; Bug ID 6764193) [1]
MFC after: 3 days
jilles [Wed, 5 May 2010 21:48:40 +0000 (21:48 +0000)]
sh: Apply locale vars on builtins, recognize LC_MESSAGES as a locale var.
This allows doing things like LC_ALL=C some_builtin to run a builtin under a
different locale, just like is possible with external programs. The
immediate reason is that this allows making printf(1) a builtin without
breaking things like LC_NUMERIC=C printf '%f\n' 1.2
This change also affects special builtins, as even though the assignment is
persistent, the export is only to the builtin (unless the variable was
already exported).
Note: for this to work for builtins that also exist as external programs
such as /bin/test, the setlocale() call must be under #ifndef SHELL. The
shell will do the setlocale() calls which may not agree with the environment
variables.
Fix deadlock between GEOM class unloading and withering. Withering can't
proceed while g_unload_class() blocks the event thread. Fix this by not
running g_unload_class() as a GEOM event and dropping the topology lock
when withering needs to proceed.
alc [Wed, 5 May 2010 18:16:06 +0000 (18:16 +0000)]
Acquire the page lock around all remaining calls to vm_page_free() on
managed pages that didn't already have that lock held. (Freeing an
unmanaged page, such as the various pmaps use, doesn't require the page
lock.)
This allows a change in vm_page_remove()'s locking requirements. It now
expects the page lock to be held instead of the page queues lock.
Consequently, the page queues lock is no longer required at all by callers
to vm_page_rename().
alc [Wed, 5 May 2010 07:47:40 +0000 (07:47 +0000)]
Use an OBJT_PHYS object and thus PG_UNMANAGED pages to implement the TSB.
The TSB is not a pageable structure, so there is no point in using managed
pages.
Add support for hardware filters to cxgb(4). The T3 chip can inspect
L2/3/4 headers and can drop or steer packets as instructed. Filtering
based on src ip, dst ip, src port, dst port, 802.1q, udp/tcp, and mac
addr is possible. Add support in cxgbtool to program these filters.
Some simple examples:
Drop all tcp/80 traffic coming from the subnet specified.
# cxgbtool cxgb2 filter 0 sip 192.168.1.0/24 dport 80 type tcp action drop
Steer all incoming UDP traffic to qset 0.
# cxgbtool cxgb2 filter 1 type udp queue 0 action pass
Steer all tcp traffic from 192.168.1.1 to qset 1.
# cxgbtool cxgb2 filter 2 sip 192.168.1.1 type tcp queue 1 action pass
Drop fragments.
# cxgbtool cxgb2 filter 3 type frag action drop
List all filters.
# cxgbtool cxgb2 filter list
index SIP DIP sport dport VLAN PRI P/MAC type Q
0 192.168.1.0/24 0.0.0.0 * 80 0 0/1 */* tcp -
1 0.0.0.0/0 0.0.0.0 * * 0 0/1 */* udp 0
2 192.168.1.1/32 0.0.0.0 * * 0 0/1 */* tcp 1
3 0.0.0.0/0 0.0.0.0 * * 0 0/1 */* frag -
16367 0.0.0.0/0 0.0.0.0 * * 0 0/1 */* * *
yongari [Tue, 4 May 2010 19:04:51 +0000 (19:04 +0000)]
Enable multi-descriptor transmisstion for fragmented mbufs. There
is no more need to defragment mbufs. After transmitting the
multi-fragmented frame, the controller updates only the first
descriptor of multi-descriptor transmission so it's driver's
responsibility to clear OWN bits of remaining descriptor of
multi-descriptor transmission. It seems the controller behaves much
like jme(4) controllers in descriptor handling.
yongari [Tue, 4 May 2010 17:12:36 +0000 (17:12 +0000)]
Make sure to check whether driver is running before processing
received frames. Also check driver has valid ifp pointer before
calling msk_stop() in device_shutdown handler. While I'm here
remove unnecessary accesses to interrupt mask registers in
device_shutdown handler because driver puts the controller into
reset state.
With these changes, msk(4) now survive from heavy RX traffic(1byte
UDP frame) while reboot is in progress.
Reported by: Mark Atkinson < atkin901 <> gmail dot com >
jkim [Tue, 4 May 2010 16:56:59 +0000 (16:56 +0000)]
- Remove more dead code[1]. Since r207330, we only need to check division
by zero of the second argument 'from'.
- Prefer u_int32_t over unsigned int to make its intention more clearer.
- Move the function to a header file and make it a static inline function.
Pointed out by: Andrew Reilly (areilly at bigpond dot net dot au)[1]
MFC after: 3 days
emaste [Tue, 4 May 2010 11:34:13 +0000 (11:34 +0000)]
Restore historical behaviour of only executing chflags on files that exist.
This eliminates cosmetic errors of the form "chflags: ...: No such file or
directory" during an installworld to an empty destination.
imp [Tue, 4 May 2010 06:19:19 +0000 (06:19 +0000)]
Go ahead and merge the work edwin@ on tftpd into the tree. It is a
lot better than what's in the tree now. Edwin tested it at a prior
employer, but can't test it today. I've found that it works a lot
better with the various uboot versions that I've used in my embedded
work. Here's the pkg-descr from the port that describes the changes:
It all started when we got some new routers, which told me the
following when trying to upload configuration or download images
from it: The TFTP server doesn't support the blocksize option.
My curiousity was triggered, it took me some reading of RFCs and
other documentation to find out what was possible and what could
be done. Was plain TFTP very simple in its handshake, TFTP with
options was kind of messy because of its backwards capability: The
first packet returned could either be an acknowledgement of options,
or the first data packet.
Going through the source code of src/libexec/tftpd and going through
the code of src/usr.bin/tftp showed that there was a lot of duplicate
code, and the addition of options would only increase the amount
of duplicate code. After all, both the client and the server can
act as a sender and receiver.
At the end, it ended up with a nearly complete rewrite of the tftp
client and server. It has been tested against the following TFTP
clients and servers:
- Itself (yay!)
- The standard FreeBSD tftp client and server
- The Fedora Core 6 tftp client and server
- Cisco router tftp client
- Extreme Networks tftp client
It supports the following RFCs:
RFC1350 - THE TFTP PROTOCOL (REVISION 2)
RFC2347 - TFTP Option Extension
RFC2348 - TFTP Blocksize Option
RFC2349 - TFTP Timeout Interval and Transfer Size Options
RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability
Statement for the Trivial File Transfer Protocol (TFTP)
It supports the following unofficial TFTP Options as described at
http://www.compuphase.com/tftp.htm:
blksize2 - Block size restricted to powers of 2, excluding protocol headers
rollover - Block counter roll-over (roll back to zero or to one)
From the tftp program point of view the following things are changed:
- New commands: "blocksize", "blocksize2", "rollover" and "options"
- Development features: "debug" and "packetdrop"
If you try this tftp/tftpd implementation, please let me know if
it works (or doesn't work) and against which implementaion so I can
get a list of confirmed working systems.
imp [Tue, 4 May 2010 06:13:17 +0000 (06:13 +0000)]
Go ahead and merge the work edwin@ on tftpd into the tree. It is a
lot better than what's in the tree now. Edwin tested it at a prior
employer, but can't test it today. I've found that it works a lot
better with the various uboot versions that I've used in my embedded
work. Here's the pkg-descr from the port that describes the changes:
It all started when we got some new routers, which told me the
following when trying to upload configuration or download images
from it: The TFTP server doesn't support the blocksize option.
My curiousity was triggered, it took me some reading of RFCs and
other documentation to find out what was possible and what could
be done. Was plain TFTP very simple in its handshake, TFTP with
options was kind of messy because of its backwards capability: The
first packet returned could either be an acknowledgement of options,
or the first data packet.
Going through the source code of src/libexec/tftpd and going through
the code of src/usr.bin/tftp showed that there was a lot of duplicate
code, and the addition of options would only increase the amount
of duplicate code. After all, both the client and the server can
act as a sender and receiver.
At the end, it ended up with a nearly complete rewrite of the tftp
client and server. It has been tested against the following TFTP
clients and servers:
- Itself (yay!)
- The standard FreeBSD tftp client and server
- The Fedora Core 6 tftp client and server
- Cisco router tftp client
- Extreme Networks tftp client
It supports the following RFCs:
RFC1350 - THE TFTP PROTOCOL (REVISION 2)
RFC2347 - TFTP Option Extension
RFC2348 - TFTP Blocksize Option
RFC2349 - TFTP Timeout Interval and Transfer Size Options
RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability
Statement for the Trivial File Transfer Protocol (TFTP)
It supports the following unofficial TFTP Options as described at
http://www.compuphase.com/tftp.htm:
blksize2 - Block size restricted to powers of 2, excluding protocol headers
rollover - Block counter roll-over (roll back to zero or to one)
From the tftp program point of view the following things are changed:
- New commands: "blocksize", "blocksize2", "rollover" and "options"
- Development features: "debug" and "packetdrop"
If you try this tftp/tftpd implementation, please let me know if
it works (or doesn't work) and against which implementaion so I can
get a list of confirmed working systems.
kib [Tue, 4 May 2010 05:55:37 +0000 (05:55 +0000)]
Implement RUSAGE_THREAD. Add td_rux to keep extended runtime and ticks
information for thread to allow calcru1() (re)use.
Rename ruxagg()->ruxagg_locked(), ruxagg_tlock()->ruxagg() [1].
The ruxagg_locked() function no longer clears thread ticks nor
td_incruntime.
Requested by: attilio [1]
Discussed with: attilio, bde
Reviewed by: bde
Based on submission by: Alexander Krizhanovsky <ak natsys-lab com>
MFC after: 1 week
X-MFC-Note: td_rux shall be moved to the end of struct thread
emaste [Mon, 3 May 2010 22:32:26 +0000 (22:32 +0000)]
Update GRANDPARENTED text to match the contents of tzdata/factory r19879.
This eliminates "warning: time zone abbreviation differs from POSIX" on
installworld to an empty filesystem.
marius [Mon, 3 May 2010 20:57:16 +0000 (20:57 +0000)]
- Don't set CAS_PCS_DATAPATH to anything except CAS_PCS_DATAPATH_SERDES
on Cassini using the external PCS SERDES otherwise unaligned access
traps and other strange effects happen with some machines. Don't touch
the MIF which is unused in that case either. These changes require the
PHY type to use to be determined via the OFW device tree or from the
VPD in machines without the former.
- Disable the SERDES pins of Saturn when not used in order to save power
and ensure they are enabled otherwise.
- In cas_attach() use the correct register offset for CAS_PCS_CONF_EN.
- Add some bus space barriers missing in the PCS code path.
These changes make the Sun GigaSwift Ethernet 1.0 MMF cards as well as
the on-board interfaces found in Sun Fire B100s Blade Server work.
kib [Mon, 3 May 2010 20:31:13 +0000 (20:31 +0000)]
Lock the page around vm_page_activate() and vm_page_deactivate() calls
where it was missed. The wrapped fragments now protect wire_count with
page lock.
kan [Mon, 3 May 2010 18:04:17 +0000 (18:04 +0000)]
Do not encode more than CTF_MAX_VLEN(1023) enum members.
CTF can not represent enums with more than CTF_MAX_VLEN members, but
ctfconvert will happily ignore that limitation and create CTF section no
other tool can interpret.
This change is different from similar change from upstream, which just
returns an error if big enum is encountered. Doing that means that
every FreeBSD kernel with compiled in hwpmc will have no useable CTF
information due to pmc_event enum having 1236+ members.
alc [Mon, 3 May 2010 17:35:31 +0000 (17:35 +0000)]
It makes more sense for the object-based backend allocator to use OBJT_PHYS
objects instead of OBJT_DEFAULT objects because we never reclaim or pageout
the allocated pages. Moreover, they are mapped with pmap_qenter(), which
creates unmanaged mappings.
alc [Mon, 3 May 2010 16:55:50 +0000 (16:55 +0000)]
Acquire the page lock around vm_page_unwire(). For consistency, extend the
scope of the object lock in agp_i810.c. (In this specific case, the scope
of the object lock shouldn't matter, but I don't want to create a bad
example that might be copied to a case where it did matter.)
netchild [Mon, 3 May 2010 14:19:58 +0000 (14:19 +0000)]
- #ifdef out the cliplist part, skype seems like using an uninitialized
variable and can cause problems, without the cliplist handling it works
without problems
- improve the cliplist error handling
- fix VIDIOCGTUNER and VIDIOCSMICROCODE (still no hardware available to test)
Submitted by: J.R. Oldroyd <jr@opal.com>
X-MFC after: soon (together with all the v4l stuff)
sobomax [Mon, 3 May 2010 07:32:50 +0000 (07:32 +0000)]
Add new tunable 'net.link.ifqmaxlen' to set default send interface
queue length. The default value for this parameter is 50, which is
quite low for many of today's uses and the only way to modify this
parameter right now is to edit if_var.h file. Also add read-only
sysctl with the same name, so that it's possible to retrieve the
current value.
alc [Mon, 3 May 2010 07:08:16 +0000 (07:08 +0000)]
The pages allocated by kmem_alloc_attr() and kmem_malloc() are unmanaged.
Consequently, neither the page lock nor the page queues lock is needed to
unwire and free them.
alc [Sun, 2 May 2010 20:24:25 +0000 (20:24 +0000)]
Simplify vm_fault(). The introduction of the new page lock renders a bit of
cleverness by vm_fault() to avoid repeatedly releasing and reacquiring the
page queues lock pointless.
marius [Sun, 2 May 2010 19:38:17 +0000 (19:38 +0000)]
Add support for SPARC64 V (and where it already makes sense for other
HAL/Fujitsu) CPUs. For the most part this consists of fleshing out the
MMU and cache handling, it doesn't add pmap optimizations possible with
these CPU, yet, though.
With these changes FreeBSD runs stable on Fujitsu Siemens PRIMEPOWER 250
and likely also other models based on SPARC64 V like 450, 650 and 850.
Thanks go to Michael Moll for providing access to a PRIMEPOWER 250.
mav [Sun, 2 May 2010 19:28:30 +0000 (19:28 +0000)]
Import mvs(4) - Marvell 88SX50XX/88SX60XX/88SX70XX/SoC SATA controllers
driver for CAM ATA subsystem. This driver supports same hardware as
atamarvell, ataadaptec and atamvsata drivers from ata(4), but provides
many additional features, such as NCQ, PMP, etc.
alc [Sun, 2 May 2010 17:33:46 +0000 (17:33 +0000)]
It makes no sense for vm_page_sleep_if_busy()'s helper, vm_page_sleep(),
to unconditionally set PG_REFERENCED on a page before sleeping. In many
cases, it's perfectly ok for the page to disappear, i.e., be reclaimed by
the page daemon, before the caller to vm_page_sleep() is reawakened.
Instead, we now explicitly set PG_REFERENCED in those cases where having
the page persist until the caller is awakened is clearly desirable. Note,
however, that setting PG_REFERENCED on the page is still only a hint,
and not a guarantee that the page should persist.
alc [Sun, 2 May 2010 16:44:06 +0000 (16:44 +0000)]
This change addresses the race condition that was introduced by the previous
revision, r207450, to this file. Specifically, between dropping the page
queues lock in vm_contig_launder() and reacquiring it in
vm_contig_launder_page(), the page may be removed from the active or
inactive queue. It could be wired, freed, cached, etc. None of which
vm_contig_launder_page() is prepared for.
mav [Sun, 2 May 2010 12:07:47 +0000 (12:07 +0000)]
Make SATA XPT negotiate and enable some additional SATA features, such as:
- device initiated power management (some devices support only this way);
- Automatic Partial to Slumber Transition (more power saving);
- DMA auto-activation (expected to slightly improve performance).
More features could be added later, when hardware supports.