Devin Teske [Wed, 12 Dec 2012 17:49:01 +0000 (17:49 +0000)]
Fix a regression caused by SVN r222417.
Prior to r222417, setting `password' in loader.conf(5) did not prevent boot
but instead only prevented changes to boot options by prompting for password
if autoboot failed or the user interrupted the countdown sequence.
After r222417 the same machine with `password' set in loader.conf(5) would no
longer boot without _always_ entering the password.
This patch restores the old (8.x and older) functionality for password in
loader.conf(5) while adding a new bootlock_password feature to replace the
edge-case should anybody desire the regressed functionality (HINT: great for
PXE servers and/or private distributions).
loader.conf(5) was updated to be more clear with-respect to password setting
(previous text was misleading).
Documentation (loader.conf(5) and check-password.4th(8)) has been updated to
include notes on the new bootlock_password setting.
Special thanks to Alex Verbod for bringing this to my attention and helping to
refine the loader.conf(5) text.
Gleb Smirnoff [Wed, 12 Dec 2012 17:41:21 +0000 (17:41 +0000)]
Fix a crash in tcp_input(), that happens when mbuf has a fwd_tag on it,
but later after processing and freeing the tag, we need to jump back again
to the findpcb label. Since the fwd_tag pointer wasn't NULL we tried to
process and free the tag for second time.
Alexander Motin [Wed, 12 Dec 2012 11:53:15 +0000 (11:53 +0000)]
Add IDs for SATA controllers on AMD Hudson-2 series chipsets.
I am not exactly sure about the naming due to lack of specs on AMD site,
but it is better to have some identification then none at all.
Gleb Smirnoff [Tue, 11 Dec 2012 08:37:08 +0000 (08:37 +0000)]
Merge 1.127 from OpenBSD, that closes a regression from 1.125 (merged
as r242694):
do better detection of when we have a better version of the tcp sequence
windows than our peer.
this resolves the last of the pfsync traffic storm issues ive been able to
produce, and therefore makes it possible to do usable active-active
statuful firewalls with pf.
Alfred Perlstein [Tue, 11 Dec 2012 01:23:50 +0000 (01:23 +0000)]
Switch the hardwired WITNESS panics to kassert_panic.
This is an ongoing effort to provide runtime debug information
useful in the field that does not panic existing installations.
This gives us the flexibility needed when shipping images to a
potentially large audience with WITNESS enabled without worrying
about formerly non-fatal LORs hurting a release.
Alfred Perlstein [Mon, 10 Dec 2012 23:17:08 +0000 (23:17 +0000)]
Add CTLFLAG_STATS to sysctl flags
In preparation for sysctl(8) growing the ability to only print
out boot/run-time tunables we need a way to differentiate between
RW sysctl nodes that tune a particular thing, or simply export
a stat that we want to allow the sysadmin to reset to 0 (or some
other value).
To do so, we add the CTLFLAG_STATS which should be OR'd into the
CTLFLAGs when exporting a "writable/resettable" statistic node via
sysctl.
Do not yield while owning a mutex. The Giant reacquire in the
kern_yield() is problematic than.
The owned mutex is the mount interlock, and it is in fact not needed
to guarantee the stability of the mount list of active vnodes, so fix
the the issue by only taking the mount interlock for MNT_REF and
MNT_REL operations.
While there, augment the unconditional yield by some amount of
spinning [1].
Reported and tested by: pho
Reviewed by: attilio
Submitted by: attilio [1]
MFC after: 3 days
Guy Helmer [Mon, 10 Dec 2012 16:14:44 +0000 (16:14 +0000)]
Changes to resolve races in bpfread() and catchpacket() that, at worst,
cause kernel panics.
Add a flag to the bpf descriptor to indicate whether the hold buffer
is in use. In bpfread(), set the "hold buffer in use" flag before
dropping the descriptor lock during the call to bpf_uiomove().
Everywhere else the hold buffer is used or changed, wait while
the hold buffer is in use by bpfread(). Add a KASSERT in bpfread()
after re-acquiring the descriptor lock to assist uncovering any
additional hold buffer races.
Andre Oppermann [Mon, 10 Dec 2012 12:19:03 +0000 (12:19 +0000)]
Prevent long type overflow of realmem calculation on ILP32 by forcing
calculation to be in quad_t space. Fix style issue with second parameter
to qmin().
Do not ignore zero address, possibly returned by the vm_map_find()
call. The function indicates a failure by the TRUE return value. To
be extra safe, assert that the return value from the following
vm_map_insert() indicates success.
Fix style issues in the nearby lines, reformulate the comment.
Reviewed by: alc (previous version)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Adrian Chadd [Sun, 9 Dec 2012 22:56:29 +0000 (22:56 +0000)]
Handle ath-specific and WME IE's in adhoc mode.
The Adhoc support wasn't parsing and handling the ath specific and WME
IEs, thus the atheros vendor support and WME TXOP parameters aren't being
copied from the peer.
It copies the WME parameters from whichever adhoc node it decides to
associate to, rather than just having them be statically configured
per adhoc node. This may or may not be exactly "right", but it's certainly
going to be more convienent for people - they just have to ensure their
adhoc nodes are setup with correct WME parameters.
Since WME parameters aren't per-node but are configured on hardware TX
queues, if some nodes support WME and some don't - or perhaps, have
different WME parameters - things will get quite quirky.
So ensure that you configure your adhoc nodes with the same WME
parameters.
Secondly - the Atheros Vendor IE is parsed and operated on per-node, so
this should work out ok between nodes that do and don't do Atheros
extensions. Once you see a becaon from that node and you setup the
association state, it _should_ parse things correctly.
TODO:
* I do need to ensure that both adhoc setup paths are correctly updating
the IE stuff. Ie, if the adhoc node is created by a data frame instead
of a beacon frame, it'll come up with no WME/ath IE config. The next
beacon frame that it receives from that node will update the state.
I just need to sit down and better understand how that's suppose to
work in IBSS mode.
Tested:
* AR5416 <-> AR9280 - fast frames and the WME configuration both popped
up. (This is with a local HAL patch that enables the fast frames
capability on the AR5416 chipsets.)
Andre Oppermann [Sun, 9 Dec 2012 22:54:03 +0000 (22:54 +0000)]
Fix bandwidth reporting when doing a restarted download with "-r".
The offset is already accounted for in xs->lastrcvd and doesn't
have to be subtracted again.
Glen Barber [Sun, 9 Dec 2012 22:53:53 +0000 (22:53 +0000)]
Get 'uname -r' earlier, so it can be used to determine what branch is
being run to set BSDINSTALL_DISTSITE accordingly. This change allows
non-RELEASE branches to use the FTP snapshots directory for bootonly.iso
installations.
Adrian Chadd [Sun, 9 Dec 2012 19:20:28 +0000 (19:20 +0000)]
Atheros SuperG bug fixes, as part of hunting down kern/174283.
The stageqdepth (global, over all staging queues) was being kept
incorrectly. It was being incremented whenever things were added,
but only decremented during a flush. During active fast frames activity
it wasn't being decremented, resulting in it always having a non-zero
value during normal fast-frames operation.
It was only used when checking if the aging queue should be checked;
we may as well just defer to each of those staging queue counters (which
look correct, thankfully.)
Whilst I'm here, add locking assertions in the staging queue add/remove
functions. The current crash shows that the staging queue has one frame,
but only has a tail pointer set (the head pointer being set to NULL.)
I'd like to grab a few more crashes where these locking assertions are
in place so I can narrow down the issue between "somehow locking is
messed up and things are racy" and "the stage queue head/tail pointer
manipulation logic is subtly wrong."
Tested:
* AR5416 STA, AR5413 AP; with FastFrames enabled in the AR5416 HAL.
Devin Teske [Sun, 9 Dec 2012 15:25:34 +0000 (15:25 +0000)]
Use ASCII characters for box/line characters in frames.4th
Committed with changes to support the following from loader.conf(5):
+ console="vidconsole comconsole" (not just console="comconsole")
+ boot_serial="anything" (not just boot_serial="YES")
+ boot_multicons="anything" (unsupported in originally-submitted patch)
PR: conf/121064
Submitted by: koitsu
Reviewed by: gcooper, adrian (co-mentor)
Approved by: adrian (co-mentor)
Adrian Chadd [Sun, 9 Dec 2012 01:08:44 +0000 (01:08 +0000)]
Don't panic if the stageq here is empty; just fall through with NULL
pointers and leave the stage queue flush routine to just do nothing
(since both head and tail here will be NULL.)
This should quieten the "stageq empty" panic where the stageq itself
is empty, but it won't fix the second KASSERT() here "staging queue empty"
as that's likely a different underlying problem.
Alan Cox [Sun, 9 Dec 2012 00:32:38 +0000 (00:32 +0000)]
In the past four years, we've added two new vm object types. Each time,
similar changes had to be made in various places throughout the machine-
independent virtual memory layer to support the new vm object type.
However, in most of these places, it's actually not the type of the vm
object that matters to us but instead certain attributes of its pages.
For example, OBJT_DEVICE, OBJT_MGTDEVICE, and OBJT_SG objects contain
fictitious pages. In other words, in most of these places, we were
testing the vm object's type to determine if it contained fictitious (or
unmanaged) pages.
To both simplify the code in these places and make the addition of future
vm object types easier, this change introduces two new vm object flags
that describe attributes of the vm object's pages, specifically, whether
they are fictitious or unmanaged.
Rick Macklem [Sat, 8 Dec 2012 22:52:39 +0000 (22:52 +0000)]
Move the NFSv4.1 client patches over from projects/nfsv4.1-client
to head. I don't think the NFS client behaviour will change unless
the new "minorversion=1" mount option is used. It includes basic
NFSv4.1 support plus support for pNFS using the Files Layout only.
All problems detecting during an NFSv4.1 Bakeathon testing event
in June 2012 have been resolved in this code and it has been tested
against the NFSv4.1 server available to me.
Although not reviewed, I believe that kib@ has looked at it.
Michael Tuexen [Sat, 8 Dec 2012 08:22:33 +0000 (08:22 +0000)]
Ensure that the padding of the last parameter of an INIT chunk
is not included in the chunk length as required by RFC 4960.
While there, cleanup sctp_send_initiate().
Fix the CTL OOA queue dumping code so that it does not hold a mutex
while doing a copyout. That can cause a panic, because copyout
can trigger VM faults, and we can't handle VM faults while holding
a mutex.
The solution here is to malloc a separate buffer to hold the OOA
queue entries, so that we don't risk a VM fault while filling up
the buffer and we don't have to drop the lock. The other solution
would be to wire the user's memory while filling their buffer with
copyout, but that would have been a little more complex.
Also fix a debugging parenthesis issue in ctl_abort_task() pointed
out by Chuck Tuffli.
Fix a device departure bug for the the pass(4), enc(4), sg(4) and ch(4)
drivers.
The bug occurrs when a userland process has the driver instance
open and the underlying device goes away. We get the devfs
callback that the device node has been destroyed, but not all of
the closes necessary to fully decrement the reference count on the
CAM peripheral.
The reason is that once devfs calls back and says the device has
been destroyed, it is moved off to deadfs, and devfs guarantees
that there will be no more open or close calls. So the solution
is to keep track of how many outstanding open calls there are on
the device, and just release that many references when we get the
callback from devfs.
scsi_pass.c,
scsi_enc.c,
scsi_enc_internal.h: Add an open count to the softc in these
drivers. Increment it on open and
decrement it on close.
When we get a devfs callback to say that
the device node has gone away, decrement
the peripheral reference count by the
number of still outstanding opens.
Make sure we don't access the peripheral
with cam_periph_unlock() after what might
be the final call to
cam_periph_release_locked(). The
peripheral might have been freed, and we
will be dereferencing freed memory.
scsi_ch.c,
scsi_sg.c: For the ch(4) and sg(4) drivers, add the
same changes described above, and in
addition, fix another bug that was
previously fixed in the pass(4) and enc(4)
drivers.
These drivers were calling destroy_dev()
from their cleanup routine, but that could
cause a deadlock because the cleanup
routine could be indirectly called from
the driver's close routine. This would
cause a deadlock, because the device node
is being held open by the active close
call, and can't be destroyed.
Rick Macklem [Sat, 8 Dec 2012 00:29:16 +0000 (00:29 +0000)]
Add support for backchannels to the kernel RPC. Backchannels
are used by NFSv4.1 for callbacks. A backchannel is a connection
established by the client, but used for RPCs done by the server
on the client (callbacks). As a result, this patch mixes some
client side calls in the server side and vice versa. Some
definitions in the .c files were extracted out into a file called
krpc.h, so that they could be included in multiple .c files.
This code has been in projects/nfsv4.1-client for some time.
Although no one has given it a formal review, I believe kib@
has taken a look at it.
The problem was a race condition between the EDT traversal used by
things like 'camcontrol devlist', and CAM peripheral driver
removal.
The EDT traversal code holds the CAM topology lock, and wants
to show devices that have been invalidated. It acquires a
reference to the peripheral to make sure the peripheral it is
examining doesn't go away.
However, because the peripheral removal code in camperiphfree()
drops the CAM topology lock to call the peripheral's destructor
routine, we can run into a situation where the EDT traversal
increments the peripheral reference count after free process is
already in progress. At that point, the reference count is
ignored, because it was 0 when we started the process.
Fix this race by setting a flag, CAM_PERIPH_FREE, that I previously
added and checked in xptperiphtraverse() and xptpdperiphtravsere(),
but failed to use. If the EDT traversal code sees that flag,
it will know that the peripheral free process has already started,
and that it should not access that peripheral.
Also, fix an inconsistency in the locking between
xptpdperiphtraverse() and xptperiphtraverse(). They now both
hold the CAM topology lock while calling the peripheral traversal
function.
cam_xpt.c: Change xptperiphtraverse() to hold the CAM topology
lock across calls to the traversal function.
Take out the comment in xptpdperiphtraverse() that
referenced the locking inconsistency.
cam_periph.c: Set the CAM_PERIPH_FREE flag when we are in the
process of freeing a peripheral driver.
Implemented uma_zone_set_warning(9) function that sets a warning, which
will be printed once the given zone becomes full and cannot allocate an
item. The warning will not be printed more often than every five minutes.
All UMA warnings can be globally turned off by setting sysctl/tunable
vm.zone_warnings to 0.
Discussed on: arch
Obtained from: WHEEL Systems
MFC after: 2 weeks
Erwin Lansing [Fri, 7 Dec 2012 12:39:58 +0000 (12:39 +0000)]
Update to 9.8.4-P1.
Security Fixes
Prevents named from aborting with a require assertion failure
on servers with DNS64 enabled. These crashes might occur as a
result of specific queries that are received.
New Features
* Elliptic Curve Digital Signature Algorithm keys and signatures in
DNSSEC are now supported per RFC 6605. [RT #21918]
Feature Changes
* Improves OpenSSL error logging [RT #29932]
* nslookup now returns a nonzero exit code when it is unable to get
an answer. [RT #29492]
Adrian Chadd [Fri, 7 Dec 2012 06:34:46 +0000 (06:34 +0000)]
Add a new 900MHz GSM regulatory SKU for the Xagyl Communications XC900M.
The XC900M acts as a Ubiquiti XR9 (and I _think_ SR9) by default;
it uses the same 900MHz<->2.4GHz downconverter mapping.
However it has an alternative frequency mapping which squeezes in a couple
more half/quarter rate channels. Since the default HAL doesn't support
fractional tuning (sub-1MHz) in 2.4GHz mode on the AR5413/AR5414, they
implement it using a jumper.
projects / FreeBSD / FreeBSD.git / log