Fix a panic when removing an IP address from an interface, if the same address
exists on another interface. The panic was introduced by change 264887, which
changed the fibnum parameter in the call to rtalloc1_fib() in
ifa_switch_loopback_route() from RT_DEFAULT_FIB to RT_ALL_FIBS. The solution
is to use the interface fib in that call. For the majority of users, that will
be equivalent to the legacy behavior.
After r264897 restore the ability to add bootoptions from FDT for
platforms which do not use loaders or kernels that want to hardcode
options or for FDT passed in by loader.
Also fix a build issue by putting the kmdp variable accessed back under
the #ifdef FDT; we may wish to revisit decision in which case more
code needs changing.
Allow a virtual machine to be forcibly reset or powered off. This is done
by adding an argument to the VM_SUSPEND ioctl that specifies how the virtual
machine should be suspended, viz. VM_SUSPEND_RESET or VM_SUSPEND_POWEROFF.
The disposition of VM_SUSPEND is also made available to the exit handler
via the 'u.suspended' member of 'struct vm_exit'.
This capability is exposed via the '--force-reset' and '--force-poweroff'
arguments to /usr/sbin/bhyvectl.
Revert r263754, re-adding support for hw.bus.devctl_disable. Breaking
old devd's and thus hosts that get IP addresses from DHCP was too much
of a POLA violation.
The sysctl may be removed again after r263758 has been merged to at
least stable/9 and stable/10, and releases have been cut from those
branches.
Turn off various fancy instruction sets, as well as deduplicate some options.
This makes the EFI loader build work with CPUTYPE=native in make.conf on
my Core i5.
Add a C libary and a Python module that implements an API similar
to bus_space(9) and that uses the proto(4) driver for talking to
hardware. If the I/O resource is a memory mapped I/O resource,
then mmap(2) will be attempted to avoid read(2)/write(2) overhead.
Add proto(4): A driver for prototyping and diagnostics.
It exposes I/O resources to user space, so that programs can peek
and poke at the hardware. It does not itself have knowledge about
the hardware device it attaches to.
Reduce number of opens by REOM RAID during provider taste.
Instead opening/closing provider by each of metadata classes, do it only
once in core code. Since for SCSI disks open/close means sending some
SCSI commands to the device, this change reduces taste time.
FD_SETSIZE is often used as an argument to select or compared with an
integer file descriptor. Rather than force 3rd party software to add
explicit casts, just make it a plain (int) constant as on other
operating systems.
Fix ZIO reordering done by vdev_queue_io causing panics when zio_vdev_io_start
returns ZIO_PIPELINE_CONTINUE from vdev_op_io_start to zio_execute resulting
in the wrong ZIO continuing its pipeline.
This is a serious issue which could cause data loss / corruption but appears
to be limited to error handling such as when vdev_readable(vd) returns false.
adrian [Sun, 27 Apr 2014 23:36:44 +0000 (23:36 +0000)]
* Add a new capability which returns whether the hardware supports
the MYBEACON RX filter (only receive beacons which match the BSSID)
or all beacons on the current channel.
* Add the relevant RX filter entry for MYBEACON.
Tested:
* AR5416, STA
* AR9285, STA
TODO:
* once the code is in -HEAD, just make sure that the code which uses it
correctly sets BEACON for pre-AR5416 chips.
adrian [Sun, 27 Apr 2014 23:35:05 +0000 (23:35 +0000)]
Program the AR_TSFOOR_THRESHOLD register with a default lifted from
the QCA HAL.
This fires off an interrupt if the TSF from the AP / IBSS peer is
wildly out of range. I'll add some code to the ath(4) driver soon
which makes use of this.
Disable the beastie menu for EFI console which doesn't support ANSI codes
(so things like `at-xy', `clear', and other commands don't work making it
impossible to generate a living menu).
ian [Sun, 27 Apr 2014 20:26:15 +0000 (20:26 +0000)]
Explain why wbinv_all is SMP-safe in this case, and add a missing l2 cache
flush. (Either it was missing here, or it isn't needed in the minidump
case. Adding it here seems like the safer path to consistancy.)
ian [Sun, 27 Apr 2014 20:16:51 +0000 (20:16 +0000)]
Flush and invalidate caches on each CPU as part of handling IPI_STOP.
Flushing the caches is required before doing a panic dump, but ARM
doesn't provide a flavor of flush that gets broadcast to other cores.
However, all cores except one are stopped before doing a dump, so this
works around the lack of a global flush/invalidate by doing it locally
on each CPU as part of stopping.
ian [Sun, 27 Apr 2014 18:12:55 +0000 (18:12 +0000)]
Remove cpu_idcache_wbinv_all() from kdb_cpu_trap(), it's no longer needed.
This was added ca. 2004 for the purpose of ensuring the caches were in the
right state after the debugger set a breakpoint. kdb_cpu_sync_icache()
was added in 2007 to handle that situation, and now the wbinv_all is
actually harmful because the operation isn't broadcast to other cores.
Improve memory allocation model for rt_msg2() rtsock messages:
* memory is now allocated as early as possible, without holding locks.
* sysctl users are now guaranteed to get a response (M_WAITOK buffer prealloc).
* socket users are more likely to use on-stack buffer for replies.
* standard kernel malloc/free functions are now used instead of radix wrappers.
rt_msg2() has been renamed to rtsock_msg_buffer().
Turn off the full witness trace on console output.
On head/, or more specifically, when WITNESS is in
the kernel config, the console is spammed excessively
with lock order reversal between isofs and devfs.
Set debug.witness.trace=0 in the installer sysctl.conf
to avoid printing the full KDB stack backtrace. This
does not prevent printing the lock order reversal has
happened, only lessens the console spam.
loader's GPT support on BIOS does not seem to like the root filesystem
being the last filesystem on the disk for some reason when made by this
script. Add a vestigial swap partition to allow this to boot with QEMU
BIOS.
Finish connecting up installer UEFI support. If the kernel was booted using
EFI, set up the disks for an EFI system. If booted from BIOS/CSM, set up
for BIOS.
Revert r258678. Make the led gpio-specifier match again the #gpio-cells
settings from the GPIO controller, which i had broken in r258678. Restore
the active-low flag.
Fix the gpio-specifier decoding by respecting the GPIO controller's
#gpio-cells property.
Add a new ofw_bus method (OFW_BUS_MAP_GPIOS()) that allows the GPIO
controller to implement its own mapping to deal with gpio-specifiers,
allowing the decoding of gpio-specifiers to be controller specific.
The default ofw_bus_map_gpios() decodes the linux standard (#gpio-cells =
<2>) and the FreeBSD standard (#gpio-cells = <3>).
It pass the gpio-specifier flag field to the children as an ivar variable so
they can act upon.
Same as it was done in r263878 for invlrng_handler(), fix order of
checks for special pcid values in invlpg_pcid_handler(). Forst check
for special values, and only then do PCID-specific page invalidation.
Minor fix to the style compliance, declare local variable at the
function start.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Fix order of libthr and libc in the global dso list for sshd, by
explicitely linking main binary with -lpthread. Before, libthr
appeared in the list due to dependency of one of the kerberos libs.
Due to the change in ld(1) behaviour of not copying NEEDED entries
from direct dependencies into the link results, the order becomes
reversed.
The libthr must appear before libc to properly interpose libc symbols
and provide working rtld locks implementation. The symptom was sshd
hanging on rtld bind lock during nested symbol binding from a signal
handler.
Approved by: des (openssh maintainer)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
When vm_fault_copy_entry() is called from vm_map_protect() for a wired
entry and performs the upgrade of the entry permissions from read-only
to read-write, we must allow to search for the source pages in the
backing object, like we do in the case of forking the read-only wired
entry. For the fork case, the behaviour is allowed by src_readonly
boolean, which in fact is only used to assert that read-write case
provides all source pages in the top-level object.
Eliminate the src_readonly variable. Allow for the copy loop to look
into the backing objects, add explicit asserts to ensure that only
read-only and upgrade case actually does.
Expand comments. Change the panic call into assert.
Add vt_efifb to VT kernel configuration now that that actually works. This
kernel will now boot on both BIOS and EFI systems without modification.
Equivalent functionality in GENERIC requires making vt(9) the default console
driver, which is probably appropriate at this point.
Disable vga if EFI framebuffer present. vt(9) should handle this internally
based on efifb's higher priority, but it doesn't, and this at least lets
us build a kernel that boots on both BIOS and EFI systems for now.
Add script to setup bootable CD ISOs for both BIOS and EFI systems. Tested
and working on QEMU. Actually using this script as the regular image
generator, like with the memstick one, will require that the kernel support
EFI too. In particular, the following two things are required:
1. vt(9) be the default console driver
2. vt_efifb and vt_vga be able to coexist usefully in the same kernel
One other note here is that this requires newfs_msdos and mdconfig, which is
really ugly. NetBSD's makefs at least seems to support FAT now. If that
actually works, it should be imported and we can get rid of the mdconfig mess.
ian [Sun, 27 Apr 2014 00:46:01 +0000 (00:46 +0000)]
Provide a proper armv7 implementation of icache_sync_all rather than
using armv7_idcache_wbinv_all, because wbinv_all doesn't broadcast the
operation to other cores. In elf_cpu_load_file() use icache_sync_all()
and explain why it's needed (and why other sync operations aren't).
As part of doing this, all callers of cpu_icache_sync_all() were
inspected to ensure they weren't relying on the old side effect of
doing a wbinv_all along with the icache work.
Revert to FAT12. This file system is apparently too small for FAT32, even
if the old (pre r264889) newfs_msdos allowed it. And FAT12 seems to work
perfectly well.
Decouple RTM_CHANGE from RTM_GET handling in rtsock.c:route_output().
RTM_CHANGE is now handled inside route.c:rtrequest1_fib() as it should be.
Note change change handler is a separate function rtrequest1_fib_change().
Retire smp_active. It was racey and caused demonstrated problems with
the cpufreq code. Replace its use with smp_started. There's at least
one userland tool that still looks at the kern.smp.active sysctl, so
preserve it but point it to smp_started as well.
make_dtb.sh is designed to be used in a kernel build environment where
MACHINE is defined to the target's value, not the host's
value. However, in Makefile.inc1, it is still defined to be the host's
value. Make the makedtb target work by expanding TARGET in the
existance test, and passing MACHINE=$TARGET in the call to make_dtb.sh
Add EFI support to the installer. This requires that the kernel provide
a sysctl to determine what firmware is in use. This sysctl does not exist
yet, so the following blocks are in front of the wheels:
- I've provisionally called this "hw.platform" after the equivalent thing
on PPC
- The logic to check the sysctl is short-circuited to always choose BIOS.
There's a comment in the top of the file about how to turn this off.
If IA64 acquired a boot1.efifat-like thing (probably with very few
modifications), the same code could be adapted there.
ian [Sat, 26 Apr 2014 16:48:09 +0000 (16:48 +0000)]
Stop calling imx51_ccm_foo() clock functions from imx6 code. Instead
define a few imx_ccm_foo() functions that are implemented by the imx51 or
imx6 ccm code. Of course, the imx6 ccm code is still more a wish than
reality, so for now its implementations just return hard-coded numbers.
des [Sat, 26 Apr 2014 11:50:25 +0000 (11:50 +0000)]
r261913 broke DES passwords, because the only way they could work,
since they don't have an easily recognizable signature, was if they
were the default. This commit rewrites crypt_set_format(3) etc to
address this:
- Use a pointer instead of an index to identify the default format.
This pointer is initialized at compile time to point to the first
first element in the list of supported formats, eliminating the
need for crypt_setdefault(). Using a pointer also simplifies
iterating through the list.
- Associate DES with the magic string "_", which takes care of the
Extended DES format.
- Finally, as a special case, if the salt does not match any known
magic string but matches ^[./0-9A-Za-z]{13}$, it is assumed to be a
DES password and is passed on to crypt_des().
Add a separate script to build the memstick.img and the
mini-memstick.img with UEFI support.
As the comments in the file suggest, 1) there must
be existing ${.OBJDIR}/usr/src/release/{release,bootonly};
2) TARGET/TARGET_ARCH must be amd64; and 3) it must be
a vt(4)-enabled kernel with vt_efifb (*not* vt_vga).
This script is not hooked into release/Makefile in any way
until further testing is complete.
ian [Fri, 25 Apr 2014 19:47:27 +0000 (19:47 +0000)]
The FTDI product ID we've been calling BEAGLEBONE is actually TI XDS100V2,
a jtag debugging product, which was used on early Beaglebone boards (later
boards used a standard FTDI 2232C product ID). Change the name accordingly,
and also add an entry for XDS100V3, the latest version of that product
which has its own new product ID number.
Split up the options into those used only by bsd.mk.* or sys.mk and
the rest. Add note of caution for the surprises that popped up. MK_SSP
is the only one used by sys.mk, and it likely needs even extra
attention.
Now that all the NO_foo expressed in this loop have been removed from
the tree, start warning that NO_foo is deprecated. It was supposed to
be gone from the tree as a user-setting a long time ago...
projects / FreeBSD / FreeBSD.git / log