neel [Wed, 30 Jan 2013 04:30:36 +0000 (04:30 +0000)]
Add support for MSI-X interrupts in the virtio network device and make that
the default.
The current behavior of advertising a single MSI vector can be requested by
setting the environment variable "BHYVE_USE_MSI" to "true". The use of MSI
is not compliant with the virtio specification and will be eventually phased
out.
np [Tue, 29 Jan 2013 20:59:22 +0000 (20:59 +0000)]
Provide a statistic to track the number of drops in each of the port's
txq's buf_ring. The aggregate for all the queues of a port is already
provided in ifnet->if_snd.ifq_drops.
delphij [Tue, 29 Jan 2013 20:05:16 +0000 (20:05 +0000)]
- Refresh code with latest OpenBSD revisions.
- Remove $DragonFly$ tags as they are using git nowadays and VCS tags will
not help merging.
- Other changes to Copyright headers to make them consistent with other
source code, we intend to fork from this point.
brooks [Tue, 29 Jan 2013 18:19:40 +0000 (18:19 +0000)]
Add -l option to cat(1). This option causes cat(1) to use fcntl(2) to
set an exclusive advisory lock on stdout. This will be used to guarantee
orderly writing to METALOG.
gabor [Tue, 29 Jan 2013 17:03:18 +0000 (17:03 +0000)]
- Add a BSD-licensed patch, ported by Pedro F. Giffuni (pfg) from
DragonflyBSD and install it as bsdpatch. WITH_BSD_PATCH makes it
default and installs GNU patch as gnupatch.
Submitted by: pfg
Obtained from: The DragonflyBSD Project
jhb [Mon, 28 Jan 2013 15:48:31 +0000 (15:48 +0000)]
- Compute the correct size to reallocate when doubling the size of the
array of loaded objects to avoid a buffer overrun.
- Use reallocf() to avoid leaking memory if the realloc() fails.
theraven [Mon, 28 Jan 2013 11:12:49 +0000 (11:12 +0000)]
Fix some symbol version mismatches between libstdc++ and libsupc++/libcxxrt
that were causing the runtime and STL libraries to see different versions of
various classes and functions when libstdc++ is used as a filter.
Note: This changes the ABI for libcxxrt, but libcxxrt is currently only in
-STABLE for testing and is not used by anything unless explicitly enabled by
the end user. No default compiler configurations use it.
libc++ will need to be recompiled after this change. make buildworld will do
this automatically, but make in lib/libc++ will not necessarily work unless the
new libcxxrt is installed first.
cperciva [Sun, 27 Jan 2013 23:33:42 +0000 (23:33 +0000)]
Add a loader tunable "hw.broken_txfifo" which enables a workaround for a
bug in old versions of QEMU (and Xen, and other places using QEMU code).
On those buggy emulated UARTs, the "TX idle" interrupt gets lost; with
this workaround, we spinwait for the TX to happen and then send ourselves
the interrupt. It's ugly but it works, while minimizing the impact on
the code for the !broken_txfifo case.
nwhitehorn [Sun, 27 Jan 2013 23:12:37 +0000 (23:12 +0000)]
If no resolv.conf has been made for the new system already and the install
media has one already, copy it in lieu of leaving things blank. This
reduces the foot-shooting potential for PXE installs that immediately
add packages.
ian [Sun, 27 Jan 2013 20:28:14 +0000 (20:28 +0000)]
Fix off-by-one errors in low-level arm9 and arm10 cache maintenance routines.
In all the routines that loop through a range of virtual addresses, the loop
is controlled by subtracting the cache line size from the total length of the
request. After the subtract, a 'bpl' instruction was used, which branches if
the result of the subtraction is zero or greater, but we need to exit the
loop when the count hits zero. Thus, all the bpl instructions in those loops
have been changed to 'bhi' (branch if greater than zero).
In addition, the two routines that walk through the cache using set-and-index
were correct, but confusing. The loop control for those has been simplified,
just so that it's easier to see by examination that the code is correct.
Routines for other arm architectures and generations still have the bpl
instruction, but compensate for the off-by-one situation by decrementing
the count register by one before entering the loop.
ian [Sun, 27 Jan 2013 20:10:29 +0000 (20:10 +0000)]
Remove the remaining references to the now-obsolete sheevaplug config files,
which have been replaced by the generic db88f6xxx config which works for all
kirkwood-series chips.
hselasky [Sun, 27 Jan 2013 18:01:03 +0000 (18:01 +0000)]
Fix regression issue after r244500 and r244503:
If a BUSDMA load operation results in a single segment which
is greater than the PAGE_SIZE, the USB computed physical
addresses will not be correct. Make sure that the first
segment is unfolded like the sub-sequent segments are into
USB_PAGE_SIZE big ranges.
kib [Sun, 27 Jan 2013 09:34:25 +0000 (09:34 +0000)]
Be conservative and do not try to consume more bytes than was
requested from the server for the read operation. Server shall not
reply with too large size, but client should be resilent too.
kib [Sun, 27 Jan 2013 09:31:11 +0000 (09:31 +0000)]
Fix reversed condition in the logic to wait for the chipset buffers
flush wait on the Gen2 chipsets. Confirmed by the inspection of the
Linux agp code.
markj [Sun, 27 Jan 2013 06:01:35 +0000 (06:01 +0000)]
When the 'R' flag is used with a newsyslog.conf entry, some fields of
the corresponding struct sigwork_entry were left uninitialized,
potentially causing an early return from do_sigwork(). Ensure that these
fields are initialized, and handle the 'R' flag properly in
do_sigwork().
ian [Sun, 27 Jan 2013 01:17:37 +0000 (01:17 +0000)]
Add support for the GlobalScale Technologies DreamPlug computer.
This adds support for version 10, revision 01, but it should also work
without changes for the 0901 model, at least until we get drivers for the
two different wifi chips involved.
Many users contributed to and tested the various patchsets floating around
for the past year that have eventually evolved into this checkin, most notably
Richard Neese who provided the bulk of the kernel config file.
ian [Sun, 27 Jan 2013 00:39:02 +0000 (00:39 +0000)]
Add a default do-nothing implementation of fdt_pci_devmap() using a weak alias,
so that we don't need an empty implementation of it for every Marvell platform
that has no PCI. This allows the removal of the SheevaPlug-specific stub and
config files, and eliminates the need to add similar stubs for future models.
Marvell platforms that do expose PCI are compiled with 'device pci' which
causes the real (non-weak) implementation in dev/fdt/fdt_pci.c to be used.
ian [Sat, 26 Jan 2013 21:29:45 +0000 (21:29 +0000)]
Reduce watchdogd's memory footprint when running daemonized.
This uses the recently-added jemalloc(3) feature of setting the lg_chunk
tuning option to zero to request that memory be allocated in the smallest
chunks possible. Without this option, the default is to initally map 8MB,
and then the mlockall() call wires that entire allocation even though the
program only uses a few Kbytes of it at runtime.
ian [Sat, 26 Jan 2013 20:16:58 +0000 (20:16 +0000)]
Fix a buffer overrun while pre-formatting the names array, perpetrated in
the prior commit. Use essentially the same sprintf() statement for both
formatting and pre-formatting, and use a format string which eliminates the
need for an extra temporary buffer when formatting the name.
Noted by: Christoph Mallon
Pointy hat to: ian
Approved by: cognet (mentor)
np [Sat, 26 Jan 2013 03:23:28 +0000 (03:23 +0000)]
Install an extra hold on the newly allocated synq entry so that it
cannot be freed while do_pass_accept_req is running. This closes a race
where do_pass_establish on another CPU (the driver chose a different
queue for the new tid) expands the synq entry into a full PCB and then
releases the only hold on it, all while do_pass_accept_req is still
running.
np [Sat, 26 Jan 2013 01:06:27 +0000 (01:06 +0000)]
cxgbe/tom: List IFCAP_TOE6 as supported now that all the required pieces
are in place. You still have to enable it explicitly, after loading the
t4_tom KLD.
adrian [Sat, 26 Jan 2013 00:37:54 +0000 (00:37 +0000)]
Initial cut at making IBSS support 802.11n aware.
* Add HTINFO field decoding to ieee80211_ies_expand() - it's likely not
100% correct as it's not looking at the draft 11n HTINFO location,
but I don't think anyone will care.
* When doing an IBSS join make sure the 11n channel configuration
is used - otherwise the 11a/11bg channel will be used
and there won't be any chance for an upgrade to 11n.
* When creating an IBSS network, ensure the channel is updated to an
11n channel so other 11n nodes can see it and speak to it with MCS
rates.
* Add a bit of code that's disabled for now which handles the HT
field updating. This won't work out very well with lots of adhoc
nodes as we'd end up ping-ponging between the HT configuration for
each node. Instead, we should likely only pay attention to the
"master" node we initially associated against and then ensure we
propagate that information forward in our subsequent beacons. However,
due to the nature of IBSS (ie, there's no specific "master" node in
the specification) it's unclear which node we should lift the HT
parameters from.
So for now this assumes the HT parameters are squirreled away in the
initial beacon/probe response.
So there's some trickiness here.
With ap/sta pairing, the probe response just populates a legacy node
and the association request/response is what is used for negotiation
11n-ness (and upgrading things as needed.)
With ibss networks, the pairing is done with probe request/response,
with discovery being done by creating nodes when new beacons in the
IBSS / BSSID are heard. There's no assoc request/response frames going on.
So the trick here has been to figure out where to upgrade things.
I don't like how I just taught ieee80211_sta_join() to "speak" HT -
I'd rather there be an upgrade path when an IBSS node joins and there
are HT parameters present. Once I've done that, I'll kill this
HT special casing that's going on in ieee80211_sta_join().
Tested:
* AR9280, AR5416, AR5212 - basic iperf and ping interoperability tests
whilst in a non-encrypted adhoc network.
TODO:
* Fix up the HT upgrade path for IBSS nodes rather than adding code
in ieee80211_sta_join(), then remove my code from there.
* When associating, there's a concept of a "master" node in the IBSS
which is the node you first joined the network through. It's possible
the correct thing to do is to listen to HT updates and configure WME
parameters from that node. However, once that node goes away, which
node(s) should be listened to for configuration changes?
For things like HT channel width, it's likely going to be ok to
just associate as HT40 and then use the per-neighbor rate control
and HTINFO/HTCAP fields to figure out which rates and configuration
to speak. Ie, for a 20MHz 11n node, just speak 20MHz rates to
it. It shouldn't "change", like what goes on in AP/STA configurations.
adrian [Sat, 26 Jan 2013 00:14:34 +0000 (00:14 +0000)]
Migrate the TX sending code out from under the ath0 taskq and into
the separate ath0 TX taskq.
Whilst here, make sure that the TX software scheduler is also
running out of the TX task, rather than the ath0 taskqueue.
Make sure that the tx taskqueue is blocked/unblocked as necessary.
This allows for a little more parallelism on multi-core machines,
as well as (eventually) supporting a higher task priority for TX
tasks, allowing said TX task to preempt an already running RX or
TX completion task.
marius [Sat, 26 Jan 2013 00:11:39 +0000 (00:11 +0000)]
- Improve some comments.
- Make bge_lookup_{rev,vendor}() static.
- Factor out chip identification rather than duplicating the code.
- Sanitize bge_probe() a bit (don't hardcode buffer sizes, allow
bge_lookup_vendor() to return NULL so the excessive panic() three
can be removed there, etc.) and return BUS_PROBE_DEFAULT rather than
hardcoding 0.
- According to the Linux tg3 driver, BCM57791 and BCM57795 aren't
capable of Gigabit Ethernet.
- Check the return value of taskqueue_start_threads().
np [Fri, 25 Jan 2013 23:58:21 +0000 (23:58 +0000)]
Move lle_event to if_llatbl.h
lle_event replaced arp_update_event after the ARP rewrite and ended up
in if_ether.h simply because arp_update_event used to be there too.
IPv6 neighbor discovery is going to grow lle_event support and this is a
good time to move it to if_llatbl.h.
The two in-tree consumers of this event - OFED and toecore - are not
affected.
marius [Fri, 25 Jan 2013 23:44:02 +0000 (23:44 +0000)]
- Check the return value of taskqueue_start_threads().
- At least the Saturn chips of 501-6738 cards need a delay after freezing
the external GMII pins before the internal PHY is accessible again. So
wait a bit after (un)freezing these. Also don't touch the other bits of
that configuration register. [1]
- Take advantage of nitems().
np [Fri, 25 Jan 2013 23:11:13 +0000 (23:11 +0000)]
Avoid NULL dereference in nd6_storelladdr when no mbuf is provided. It
is called this way from a couple of places in the OFED code. (toecore
calls it too but that's going to change shortly).
jhb [Fri, 25 Jan 2013 15:25:24 +0000 (15:25 +0000)]
Further cleanups to use of timestamps in NFS:
- Use NFSD_MONOSEC (which maps to time_uptime) instead of the seconds
portion of wall-time stamps to manage timeouts on events.
- Remove unused nd_starttime from the per-request structure in the new
NFS server.
- Use nanotime() for the modification time on a delegation to get as
precise a time as possible.
- Use time_second instead of extracting the second from a call to
getmicrotime().